DELL-NETWORKING-OPENFLOW-MIB: View SNMP OID List / Download MIB

Dell Networking OS OpenFlow MIB provides information base of OpenFlow enabled Dell Networking OS Switch. This MIB exposes information about the Switch in OpenFlow perspective. Information of : 1) OpenFlow Instances configured, 2) Controller that configured it, 3) Ports that are configured under these instances, 4) VLANs that are part of these instances and 5) Flows & Flowactions configured are shared via this MIB.

Open Flow Switch Id: Identifier of this Switch

Open Flow Manufacturer Description: Provides info about the OF Switch manufacturer

Open Flow Switch HardwareDescription

Open Flow Switch SoftwareDescription

Open Flow Switch Serial No: Provides the serial number of the switch

Open Flow Switch Version

Open Flow Instance Table

Open Flow Instance Entry: This provides the sequence of objects that describes the properties of the Instance. ofInstId uniquely identifies the instance and hence it becomes an index

Open Flow Instance Identifier

Open Flow Instance Admin State: tells whether this instance is enabled or not. Enumeration: 'down': 2, 'up': 1.

Open Flow Instance Interface Type: tells whether this instance is a Port or VLAN or ANY Enumeration: 'vlan': 2, 'port': 1, 'any': 3.

Open Flow Instance DataPath Identifier

Open Flow Instance Connection Timeout: Tells the time after which the connection would be dropped

Open Flow Instance Echo Reply Timeout: Tells the max time for which the Echo message would wait for reply

Open Flow Instance Echo Request Interval: Tells how often the Echo message would be sent

The current number of flows in this Instance

Open Flow Instance Supported Capabilities: Gives the supported capabilities information by setting the appropriate BITS Bits: 'table': 1, 'flow': 2, 'port': 0.

Open Flow Instance Supported Actions: Gives the supported Action information by setting the appropriate BITS Bits: 'set-pcp': 2, 'set-dmac': 4, 'set-vlan': 1, 'set-tos': 5, 'output': 0, 'set-smac': 3.

Open Flow Controller Table: This table provides information about the Controller

Open Flow Controller Entry

Open Flow Controller Id: This provides Id of this controller

Open Flow Controller IP Address Type : The address type of the controller's IP address. If no controller is configured yet then this is set to unknown(0).

Open Flow Controller IP Address: This gives the IP Address of the controller. The InetAddressType of this is given by the ofCntlrAddrType object.

Open Flow Controller Port: This provides the port number to be used to communicate with the controller

Open Flow Controller Protocol: Tells which protocol is being used by this Controller for communication, either TLS or TCP Enumeration: 'tls': 1, 'tcp': 2.

Open Flow Controller Connection State Enumeration: 'down': 1, 'up': 2.

Open Flow Port Table

Open Flow Port Entry has ports assigned to the instance

The ifIndex value corresponding to this port

Open Flow Port Association Type: Tells whether this port is directly assigned to the instance or via VLAN. Enumeration: 'instancePort': 1, 'instVlanPort': 2.

Open Flow VLAN Table containing port list information for each VLAN configured into the instance.

Open Flow VLAN Entry. Restricted to max 8 VLANs per instance.

The ifIndex value corresponding to this VLAN.

Open Flow Vlan Id: VALN-ID referring to this VLAN.

Open Flow FlowTable

Open Flow Instance Flow Entry

OpenFlow Flow Id

OpenFlow Flow Table Id

OpenFlow Flow priority

OpenFlow Flow Idle Time

OpenFlow Flow Hard Timeout

The time since the OpenFlow flow was configured to be up.

OpenFlow Flow Cookie String

OpenFlow Flow Packet Count

OpenFlow Flow Byte Count

Open Flow Match Parameter Table

A set of parameters to be mactheded on a particular openFlow Table.

OpenFlow Flow Match Ingress Ports; Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match Ethernet Source Address. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match Ethernet Destination Address. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match Vlan Id. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match Ethernet Type. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match VLAN Priority. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match IP TOS

OpenFlow Flow match IP Protocol

OpenFlow Flow Match IP Source Address. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match IP Destination Adress. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match Transport Source Port. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Match Transport Destination Port. Note that when the value of this object is the zero-length string, it indicates 'wild card'.

OpenFlow Flow Action Table

OpenFlow Flow Action Entry

Open Flow Action Id

OpenFlow Flow Action Type - Following are the supported Actions outToSwitchPort -> Output to switch port. setVlanVid -> Set the 802.1q VLAN id. setVlanPcp -> Set the 802.1q priority. stripVlan -> Strip the 802.1q header. setDlSrc -> Ethernet source address. setDlDst -> Ethernet destination address. setNetworkSrc -> IP source address. setNetworkDst -> IP destination address. setNetworkTos -> IP ToS (DSCP field, 6 bits). setTpSrc -> TCP/UDP source port. setTpDest -> TCP/UDP destination port. outToQueue -> Output to queue. vendor -> Vendor specific action Enumeration: 'outToSwitchPort': 1, 'vendor': 65535, 'setVlanVid': 2, 'setVlanPcp': 3, 'setDlDst': 6, 'stripVlan': 4, 'setNetworkSrc': 7, 'setDlSrc': 5, 'setTpSrc': 10, 'setNetworkTos': 9, 'setTpDest': 11, 'outToQueue': 12, 'setNetworkDst': 8.

OpenFlow Flow Action Source Mac address

OpenFlow Flow Action Destination Mac

Ifindex value of OpenFlow Flow Action Port

OpenFlow Flow Action VLAN ID

OpenFlow Flow Action Max Length

OpenFlow Flow Action VLAN PCP

OpenFlow Flow Action Network TOS

The compliance statement for the Dell Networking OS OpenFlow MIB.

This represents group of objects that provides OF Switch information.

This represents group of objects that provides OF Instance information.

This represents group of objects that provides OF Controller information.

This represents group of objects that provides information about OF Port that corresponds to OF Instance.

This represents group of objects that provides information about OF VLAN that corresponds to OF Instance.

This represents group of objects that provides OF Flow information.

This represents group of objects that provides OF Flow match information.

This represents group of objects that provides information about OF Flow Actions.

This represents Notification object of OF Switch.

This notification is sent when ever Controller's Session Status has changed.

This notification is sent when ever Flow Table reached its maximum capacity. ofSwitchFlowTableSrc gives the id of the Flow Table that reached max flows

The unique ID of an OpenFlow Table. Used by ofSwitchFlowTableFull trap. Enumeration: 'dmac': 3, 'route': 4, 'vlan': 2, 'ifp': 1, 'lb': 5.