DECHUB900-HRIP-MIB-V3-0: View SNMP OID List / Download MIB

VENDOR: DEC


 Home MIB: DECHUB900-HRIP-MIB-V3-0
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dec 1.3.6.1.4.1.36
       ema 1.3.6.1.4.1.36.2
           decMIBextension 1.3.6.1.4.1.36.2.18
                 decHub900 1.3.6.1.4.1.36.2.18.11
                       mgmtAgent 1.3.6.1.4.1.36.2.18.11.1
                           mgmtAgentVersion1 1.3.6.1.4.1.36.2.18.11.1.1
                               hrip 1.3.6.1.4.1.36.2.18.11.1.1.2
                                   hripPubRingCfgTable 1.3.6.1.4.1.36.2.18.11.1.1.2.1 no-access
Defines a table for ring speeds. The table has 2 rows. Row 1 defines ring speed for ring A and row 2 defines the ring speed for ring B.
                                       hripPubRingCfgEntry 1.3.6.1.4.1.36.2.18.11.1.1.2.1.1 no-access
An entry in the hripPubRingCfgTable.
                                           hripRingCfgIndex 1.3.6.1.4.1.36.2.18.11.1.1.2.1.1.1 integer read-only
Identifies the ring being accessed ie the row of the table being referred to. Enumeration: 'ringB': 2, 'ringA': 1.
                                           hripRingCfgSpeed 1.3.6.1.4.1.36.2.18.11.1.1.2.1.1.2 integer read-write
The speed of each of the token rings on the backplane. speed4(1) indicates a speed of 4 Mbits per second while speed16(2) indicates 16 Mbits per second. The value of this object is maintained across power cycles and resets. Enumeration: 'speed4': 2, 'speed16': 3.
                                   hripPubSlotCfgTable 1.3.6.1.4.1.36.2.18.11.1.1.2.2 no-access
Defines a table for Slot Configurations. Each row in the table corresponds to a backplane slot (hripSlotIndex).
                                       hripPubSlotCfgEntry 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1 no-access
An entry in the hripPubSlotCfgTable.
                                           hripSlotCfgIndex 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1.1 integer read-only
Index into the table of slot configurations.
                                           hripSlotCfgDisable 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1.2 integer read-write
Locks out the corresponding backplane port in that slot. -2 is used for linecards like the MIPPY that have multiple physical token ring backplane ports. The default setting is enable (for ports 1 & 2) The value of this object is maintained across power cycles and resets. Enumeration: 'disabled-1': 2, 'enabled-1': 1, 'disabled-4': 4, 'enabled-2': 3.
                                           hripSlotCfgForce 1.3.6.1.4.1.36.2.18.11.1.1.2.2.1.3 integer read-write
Describes a slot/ring pairing. -2 is used for linecards like the MIPPY that have multiple physical token ring backplane ports. The value of this object is maintained across power cycles and resets. Enumeration: 'forceRingB-1': 3, 'forceRingB-2': 6, 'forceRingA-2': 5, 'forceRingA-1': 2, 'noForce-1': 1, 'noForce-2': 4.
                                   hripPubRingStatTable 1.3.6.1.4.1.36.2.18.11.1.1.2.3 no-access
A table describing the number of modules on each ring.
                                       hripPubRingStatEntry 1.3.6.1.4.1.36.2.18.11.1.1.2.3.1 no-access
An entry describing the number of modules on each ring.
                                           hripRingStatIndex 1.3.6.1.4.1.36.2.18.11.1.1.2.3.1.1 integer read-only
An index into the hripPubRingStatTable. Enumeration: 'ringB': 2, 'ringA': 1.
                                           hripRingStatNumModInserted 1.3.6.1.4.1.36.2.18.11.1.1.2.3.1.2 integer read-only
The number of modules inserted onto the ring.
                                   hripPubSlotStatTable 1.3.6.1.4.1.36.2.18.11.1.1.2.4 no-access
The status of modules inserted on each slot of backplane.
                                       hripPubSlotStatEntry 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1 no-access
An entry in the hripPubSlotStatTable.
                                           hripSlotStatIndex 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.1 integer read-only
The index into slot status table.
                                           hripSlotStatRingAInsertCount 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.2 gauge read-only
The number of times that the module has transitioned between inserted/wrapped states on backplane ring A, since the module was last reset/power-cycled.
                                           hripSlotStatRingBInsertCount 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.3 gauge read-only
The number of times that the module has transitioned between inserted/wrapped states on backplane ring B, since the module was last reset/power-cycled.
                                           hripSlotStatTcuA 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.4 integer read-only
Status of the TCU on ring A. If there is a non Token Ring linecard plugged into the hub, the value reported should be nonTR(3). For a Token Ring line-card the value is inserted or wrapped Enumeration: 'wrapped': 2, 'notTR': 3, 'inserted': 1.
                                           hripSlotStatTcuB 1.3.6.1.4.1.36.2.18.11.1.1.2.4.1.5 integer read-only
Status of the TCU on ring B. If there is a non Token Ring linecard plugged into the hub, the value reported should be nonTR(3). For a Token Ring line-card the value is inserted or wrapped Enumeration: 'wrapped': 2, 'notTR': 3, 'inserted': 1.