DCP-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: SMARTOPTICS AS


 Home MIB: DCP-INTERFACE-MIB
Download as:   
SNMPv2-CONF, DCP-MIB, SNMPv2-SMI, SO-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dcpInterface 1.3.6.1.4.1.30826.2.2.1
This is the enterprise specific DCP INTERFACE MIB for Smartoptics
     dcpInterfaceObjects 1.3.6.1.4.1.30826.2.2.1.1
         dcpInterfaceTable 1.3.6.1.4.1.30826.2.2.1.1.1 no-access
A table with all optical interfaces of the system.
             dcpInterfaceEntry 1.3.6.1.4.1.30826.2.2.1.1.1.1 no-access
Description.
                 dcpInterfaceIndex 1.3.6.1.4.1.30826.2.2.1.1.1.1.1 unsigned32 no-access
Interface Index in the following format: csiixy where c: chassis. s: slot number. ii: Interface number. x: 1 = line, 2 = client. y: 0 = tx+rx port, 1 = tx port, 2 = rx port. For DCP-M products Slot is always 0. Same Index is used in the IF-MIB.
                 dcpInterfaceName 1.3.6.1.4.1.30826.2.2.1.1.1.1.2 displaystring read-only
The interface name. If no interface this value is empty. if-c/s/i where c = chassis, s = slot, i = interface or if-c/channelid where c = chassis.
                 dcpInterfaceRxPower 1.3.6.1.4.1.30826.2.2.1.1.1.1.3 opticalpower1decimal read-only
The optical power received at the Rx port in units of 0.1 dBm.
                 dcpInterfaceTxPower 1.3.6.1.4.1.30826.2.2.1.1.1.1.4 opticalpower1decimal read-only
The optical power transmitted at the Tx port in units of 0.1 dBm.
                 dcpInterfaceStatus 1.3.6.1.4.1.30826.2.2.1.1.1.1.5 interfacestatus read-only
The operational state for a port. idle - The port is not activated. down - The port traffic is lost. up - There is traffic on the port.
                 dcpInterfaceAlarm 1.3.6.1.4.1.30826.2.2.1.1.1.1.6 ituperceivedseverity read-only
The highest alarm severity of the interface.
                 dcpInterfaceFormat 1.3.6.1.4.1.30826.2.2.1.1.1.1.7 displaystring read-only
The traffic format of the interface.
                 dcpInterfaceWavelength 1.3.6.1.4.1.30826.2.2.1.1.1.1.8 displaystring read-only
The ITU channel wavelength.
                 dcpInterfaceChannelId 1.3.6.1.4.1.30826.2.2.1.1.1.1.9 displaystring read-only
DWDM or CWDM channel identification.
                 dcpInterfaceDescription 1.3.6.1.4.1.30826.2.2.1.1.1.1.10 displaystring read-only
User configurable description string for the interface.
     dcpInterfaceMIBCompliance 1.3.6.1.4.1.30826.2.2.1.2
         dcpInterfaceMIBGroups 1.3.6.1.4.1.30826.2.2.1.2.1
             dcpInterfaceTableGroupV1 1.3.6.1.4.1.30826.2.2.1.2.1.1
The interface table objects V1.
             dcpInterfaceTableGroupV2 1.3.6.1.4.1.30826.2.2.1.2.1.2
The interface table objects V2.
         dcpInterfaceMIBCompliances 1.3.6.1.4.1.30826.2.2.1.2.2
             dcpInterfaceBasicComplV1 1.3.6.1.4.1.30826.2.2.1.2.2.1
Basic implementation requirements for the DCP-INTERFACE-MIB V1.
             dcpInterfaceBasicComplV2 1.3.6.1.4.1.30826.2.2.1.2.2.2
Basic implementation requirements for the DCP-INTERFACE-MIB V2.