DASAN-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: DASAN-SWITCH-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DASAN-SMI, INET-ADDRESS-MIB, SNMPv2-TC, DASAN-DHCP-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dasanSwitchMIB 1.3.6.1.4.1.6296.9.1
The MIB module to describe Switch product.
         dsSwitchSystem 1.3.6.1.4.1.6296.9.1.1.1
             dsResetSystem 1.3.6.1.4.1.6296.9.1.1.1.1 integer read-write
Send system-reset to this system. Enumeration: 'reset': 1.
             dsWriteConfig 1.3.6.1.4.1.6296.9.1.1.1.2 integer read-write
Write current running configuration to flash memory. Enumeration: 'write': 1.
             dsOsVersion 1.3.6.1.4.1.6296.9.1.1.1.3 displaystring read-only
The version of running OS.
             dsTftpServer 1.3.6.1.4.1.6296.9.1.1.1.4 displaystring read-write
The IP address or hostname of TFTP server.
             dsTftpFile 1.3.6.1.4.1.6296.9.1.1.1.5 displaystring read-write
The Remote file name
             dsTftpStatus 1.3.6.1.4.1.6296.9.1.1.1.6 integer read-write
TFTP transaction status. To receive a file from remote server, get is used. To send OS or Configuration to remote server, put is used. Abort can be used to terminate running tftp client. Enumeration: 'busy': 3, 'succeeded': 5, 'get': 1, 'unknown': 2, 'failed': 4, 'idle': 0, 'abort': 6, 'put': 7.
             dsTftpFileType 1.3.6.1.4.1.6296.9.1.1.1.7 integer read-write
TFTP file type. The value of cpe-nos(2) is only available, in case of dsVdsl. Enumeration: 'configuration': 1, 'cpeNos': 2, 'operatingSystem': 0.
             dsCpuLoad5s 1.3.6.1.4.1.6296.9.1.1.1.8 integer read-only
The Avg. Value of CPU Load for 5 seconds
             dsCpuLoad1m 1.3.6.1.4.1.6296.9.1.1.1.9 integer read-only
The Avg. Value of CPU Load for 1 minute
             dsCpuLoad10m 1.3.6.1.4.1.6296.9.1.1.1.10 integer read-only
The Avg. Value of CPU Load for 10 minutes
             dsCpuLoad5sisr 1.3.6.1.4.1.6296.9.1.1.1.11 integer read-only
The Avg. Value of CPU Load for 5 seconds(interupt service routine)
             dsCpuLoad1misr 1.3.6.1.4.1.6296.9.1.1.1.12 integer read-only
The Avg. Value of CPU Load for 1 minute(interupt service routine)
             dsCpuLoad10misr 1.3.6.1.4.1.6296.9.1.1.1.13 integer read-only
The Avg. Value of CPU Load for 10 minutes(interupt service routine)
             dsTotalMem 1.3.6.1.4.1.6296.9.1.1.1.14 integer read-only
The Total memory of system
             dsUsedMem 1.3.6.1.4.1.6296.9.1.1.1.15 integer read-only
The Used memory of system
             dsFreeMem 1.3.6.1.4.1.6296.9.1.1.1.16 integer read-only
The Free memory of sytem
             dsHardwareVersion 1.3.6.1.4.1.6296.9.1.1.1.17 displaystring read-only
The Hardware version of system.
             dsSoftwareCompatibility 1.3.6.1.4.1.6296.9.1.1.1.18 integer read-only
The Software Compatibility
             dsSerialNumber 1.3.6.1.4.1.6296.9.1.1.1.19 displaystring read-only
The Serial number of system
             dsFirmwareVersion 1.3.6.1.4.1.6296.9.1.1.1.20 displaystring read-only
The Firmware version of system
             dsHardwareAddress 1.3.6.1.4.1.6296.9.1.1.1.21 macaddress read-only
The Firmware version of system
             dsTimeZone 1.3.6.1.4.1.6296.9.1.1.1.22 octet string read-write
The Time zone.
             dsSystemNOSInfo 1.3.6.1.4.1.6296.9.1.1.1.30
                   dsSystemNOSTable 1.3.6.1.4.1.6296.9.1.1.1.30.1 no-access
A list of dsSystemNOSEntry entries.
                       dsSystemNOSEntry 1.3.6.1.4.1.6296.9.1.1.1.30.1.1 no-access
An entry containing management information applicable to a particular .
                           dsSystemNOSIndex 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                           dsSystemNOSName 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.2 octet string read-only
.
                           dsSystemNOSVersion 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.3 octet string read-only
.
                           dsSystemNOSSize 1.3.6.1.4.1.6296.9.1.1.1.30.1.1.4 integer read-only
.
                   dsSystemUpgradeInfo 1.3.6.1.4.1.6296.9.1.1.1.30.2
                       dsSystemUpgradeMethod 1.3.6.1.4.1.6296.9.1.1.1.30.2.1 integer read-write
FTP or TFTP. Enumeration: 'ftp': 1, 'tftp': 0.
                       dsSystemUpgradeAddressType 1.3.6.1.4.1.6296.9.1.1.1.30.2.2 inetaddresstype read-write
Determine whether using IPv4 or IPv6, etc.
                       dsSystemUpgradeAddress 1.3.6.1.4.1.6296.9.1.1.1.30.2.3 inetaddress read-write
The server address.
                       dsSystemUpgradeUser 1.3.6.1.4.1.6296.9.1.1.1.30.2.4 octet string read-write
The user name.
                       dsSystemUpgradePasswd 1.3.6.1.4.1.6296.9.1.1.1.30.2.5 octet string read-write
The password. In case of ftp, need password.
                       dsSystemUpgradePath 1.3.6.1.4.1.6296.9.1.1.1.30.2.6 octet string read-write
Indicate where NOS exist.
                       dsSystemUpgradeStorage 1.3.6.1.4.1.6296.9.1.1.1.30.2.7 integer read-write
The type of NOS. Enumeration: 'os1': 1, 'os2': 2, 'cpe': 3.
                       dsSystemUpgradeValue 1.3.6.1.4.1.6296.9.1.1.1.30.2.8 integer read-write
Additional information. ex) the slot-number of xDSL,... .
                       dsSystemUpgradeStatus 1.3.6.1.4.1.6296.9.1.1.1.30.2.9 integer read-write
. Enumeration: 'busy': 4, 'success': 5, 'unknown': 0, 'upload': 2, 'fail': 6, 'idle': 1, 'download': 3.
                       dsSystemUpgradeNotification 1.3.6.1.4.1.6296.9.1.1.1.30.2.15
                             dsSystemUpgraded 1.3.6.1.4.1.6296.9.1.1.1.30.2.15.1
.
         dsSwitchModules 1.3.6.1.4.1.6296.9.1.1.2
             dsPortTable 1.3.6.1.4.1.6296.9.1.1.2.4 no-access
A list of dsPortEntry entries.
                 dsPortEntry 1.3.6.1.4.1.6296.9.1.1.2.4.1 no-access
An entry containing management information applicable to a particular port.
                     dsPortModuleIndex 1.3.6.1.4.1.6296.9.1.1.2.4.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsPortPortIndex 1.3.6.1.4.1.6296.9.1.1.2.4.1.2 integer read-only
A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsPortType 1.3.6.1.4.1.6296.9.1.1.2.4.1.3 displaystring read-only
The type of communication port. This string defines the type of port.
                     dsPortIfIndex 1.3.6.1.4.1.6296.9.1.1.2.4.1.4 object identifier read-only
matching ifIndex oid which is defined in interface mib.
                     dsPortPVID 1.3.6.1.4.1.6296.9.1.1.2.4.1.5 integer read-write
The PVID of port.
                     dsPortShared 1.3.6.1.4.1.6296.9.1.1.2.4.1.6 integer read-only
The Shared status of port. Enumeration: 'disabled': 2, 'enabled': 1.
                     dsPortNego 1.3.6.1.4.1.6296.9.1.1.2.4.1.7 integer read-write
The Nego mode of port. Enumeration: 'auto': 1, 'other': 3, 'forced': 2.
                     dsPortDuplex 1.3.6.1.4.1.6296.9.1.1.2.4.1.8 integer read-write
The duplex status of port. Enumeration: 'full': 1, 'other': 3, 'half': 2.
                     dsPortUpSpeed 1.3.6.1.4.1.6296.9.1.1.2.4.1.9 integer read-only
Upstream speed of port. bits/second
                     dsPortDownSpeed 1.3.6.1.4.1.6296.9.1.1.2.4.1.10 integer read-only
Downstream speed of port. bits/second
                     dsPortFlowControl 1.3.6.1.4.1.6296.9.1.1.2.4.1.11 integer read-write
The flow control mode of port. Enumeration: 'disabled': 2, 'notavailable': 3, 'enabled': 1.
                     dsPortIngressrate 1.3.6.1.4.1.6296.9.1.1.2.4.1.12 integer read-write
A incomming rate limit control value. In case of Vdsl QAM20, it means constellation value of each port.
                     dsPortEgressrate 1.3.6.1.4.1.6296.9.1.1.2.4.1.13 integer read-write
A outgoing rate limit control value.
                     dsPortInstallStatus 1.3.6.1.4.1.6296.9.1.1.2.4.1.14 integer read-only
The install status of optional module. Enumeration: 'uninstalled': 2, 'removed': 0, 'gbicinstalled': 3, 'installed': 1.
                     dsPortCurrentHost 1.3.6.1.4.1.6296.9.1.1.2.4.1.15 integer read-only
The number hosts which is allowed to be used.
                     dsPortMaxHost 1.3.6.1.4.1.6296.9.1.1.2.4.1.16 integer read-write
The maximum number hosts which can be allowed to be used. '-1' means the unlimited max-host value.
                     dsPortUpUtil5s 1.3.6.1.4.1.6296.9.1.1.2.4.1.26 integer read-only
Upstream traffic utilization during last 5 seconfs. Unit: bps
                     dsPortUpUtil1m 1.3.6.1.4.1.6296.9.1.1.2.4.1.27 integer read-only
Upstream traffic utilization during last 1 minute. Unit: bps
                     dsPortUpUtil10m 1.3.6.1.4.1.6296.9.1.1.2.4.1.28 integer read-only
Upstream traffic utilization during last 10 minute. Unit: bps
                     dsPortDownUtil5s 1.3.6.1.4.1.6296.9.1.1.2.4.1.29 integer read-only
Downstream traffic utilization during last 5 seconfs. Unit: bps
                     dsPortDownUtil1m 1.3.6.1.4.1.6296.9.1.1.2.4.1.30 integer read-only
Downstream traffic utilization during last 1 minute. Unit: bps
                     dsPortDownUtil10m 1.3.6.1.4.1.6296.9.1.1.2.4.1.31 integer read-only
Downstream traffic utilization during last 10 minute. Unit: bps
                     dsPortDescription 1.3.6.1.4.1.6296.9.1.1.2.4.1.32 displaystring read-write
Port description string
                     dsPortWanAdminStatus 1.3.6.1.4.1.6296.9.1.1.2.4.1.33 integer read-write
Administrative status of WAN port Enumeration: 'down': 0, 'up': 1.
                     dsPortWanOperStatus 1.3.6.1.4.1.6296.9.1.1.2.4.1.34 integer read-only
Operational status of WAN port Enumeration: 'down': 0, 'up': 1.
                     dsPortReset 1.3.6.1.4.1.6296.9.1.1.2.4.1.35 integer read-write
Operational Reset of port Enumeration: 'reset': 1.
                     dsPortSpeed 1.3.6.1.4.1.6296.9.1.1.2.4.1.40 integer read-write
switch port speed. bits/second. these value is vaild, 10000000,100000000,1000000000.
                     dsPortCurrUpTime 1.3.6.1.4.1.6296.9.1.1.2.4.1.41 timeticks read-write
Port's link-up time within the current one day interval.
                     dsPortPrevUpTime 1.3.6.1.4.1.6296.9.1.1.2.4.1.42 timeticks read-write
Port's link-up time for the previous one day .
                     dsPortTrunkID 1.3.6.1.4.1.6296.9.1.1.2.4.1.43 integer read-only
The trunk ID that this port belong to.
                     dsPortCRCCount 1.3.6.1.4.1.6296.9.1.1.2.4.1.44 integer read-only
The trunk ID that this port belong to.
                     dsPortRateLimitUnit 1.3.6.1.4.1.6296.9.1.1.2.4.1.45 counter32 read-write
The rate-limit unit value. only for V2XXX.
                     dsPortRateLimitIngressThreshold 1.3.6.1.4.1.6296.9.1.1.2.4.1.46 counter32 read-write
The rate-limit ingress threshold value. only for V2XXX.
                     dsPortRateLimitEgressThreshold 1.3.6.1.4.1.6296.9.1.1.2.4.1.48 counter32 read-write
The rate-limit egress threshold value. only for V2XXX.
                     dsPortCableLength 1.3.6.1.4.1.6296.9.1.1.2.4.1.49 displaystring read-only
Description.
             dsTemperatureTable 1.3.6.1.4.1.6296.9.1.1.2.5 no-access
A list of dsTemperatureEntry entries.
                 dsTemperatureEntry 1.3.6.1.4.1.6296.9.1.1.2.5.1 no-access
An entry containing temperature information.
                     dsTemperatureNodeIndex 1.3.6.1.4.1.6296.9.1.1.2.5.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsTemperatureIndex 1.3.6.1.4.1.6296.9.1.1.2.5.1.2 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsTemperatureStatus 1.3.6.1.4.1.6296.9.1.1.2.5.1.3 integer read-only
dsTemperature status information
             dsPowerTable 1.3.6.1.4.1.6296.9.1.1.2.6 no-access
A list of dsPowerEntry entries.
                 dsPowerEntry 1.3.6.1.4.1.6296.9.1.1.2.6.1 no-access
An entry containing dsPower information.
                     dsPowerNodeIndex 1.3.6.1.4.1.6296.9.1.1.2.6.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsPowerIndex 1.3.6.1.4.1.6296.9.1.1.2.6.1.2 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsPowerstatus 1.3.6.1.4.1.6296.9.1.1.2.6.1.3 integer read-only
dsPower status information Enumeration: 'fail': 2, 'other': 3, 'ok': 1.
                     dsPowerinstalled 1.3.6.1.4.1.6296.9.1.1.2.6.1.4 integer read-only
dsPower install information Enumeration: 'uninstalled': 2, 'removed': 0, 'installed': 1.
             dsFanTable 1.3.6.1.4.1.6296.9.1.1.2.7 no-access
A list of dsFanEntry entries.
                 dsFanEntry 1.3.6.1.4.1.6296.9.1.1.2.7.1 no-access
An entry containing fan information.
                     dsFanNodeIndex 1.3.6.1.4.1.6296.9.1.1.2.7.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsFanIndex 1.3.6.1.4.1.6296.9.1.1.2.7.1.2 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsFanstatus 1.3.6.1.4.1.6296.9.1.1.2.7.1.3 integer read-only
dsFan status information Enumeration: 'fail': 2, 'other': 3, 'ok': 1.
                     dsFaninstalled 1.3.6.1.4.1.6296.9.1.1.2.7.1.4 integer read-only
dsFan install information Enumeration: 'uninstalled': 2, 'removed': 0, 'installed': 1.
             dsVdslPortTable 1.3.6.1.4.1.6296.9.1.1.2.8 no-access
A list of dsVdslPortEntry entries.
                 dsVdslPortEntry 1.3.6.1.4.1.6296.9.1.1.2.8.1 no-access
An entry containing management information applicable to a particular dsVdsl port.
                     dsVdslModuleIndex 1.3.6.1.4.1.6296.9.1.1.2.8.1.1 integer read-only
A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsVdslPortIndex 1.3.6.1.4.1.6296.9.1.1.2.8.1.2 integer read-only
A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                     dsVdslPortType 1.3.6.1.4.1.6296.9.1.1.2.8.1.3 displaystring read-only
The type of dsVdsl port. This string defines the type of port.
                     dsVdslPortIfIndex 1.3.6.1.4.1.6296.9.1.1.2.8.1.4 object identifier read-only
matching ifIndex oid which is defined in interface mib.
                     dsVdslPortUpProfile 1.3.6.1.4.1.6296.9.1.1.2.8.1.5 integer read-write
dsVdsl Upstream profile ID. sym11 (2) Symmetric 11/11 asym11 (1) Asymmetric 3/11 a-sym11 (0) ADSL friendly symmetric 11/11 a-asym11 (3) ADSL friendly asymmetric 3/11 a-sym13 (4) ADSL friendly symmetric 13/13 a-asym13 (6) ADSL friendly asymmetric 3/13 sym16 (5) Symmetric 16/16 tl13 (7) T-LAN friendly 13/13 tl16 (8) T-LAN friendly 16/16 tl16a (9) T-LAN friendly 13/16A (QAM20 ONLY) asym24 (11) PLAN998 Asymmetric 8/24 (QAM20 ONLY) asym18 (12) PLAN998 Asymmetric 8/18 (QAM20 ONLY) asym25 (13) PLAN998 Asymmetric Enhanced 8/25(QAM20 ONLY) asym26 (14) PLAN998 Asymmetric Enhanced 8/26(QAM20 ONLY) asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PLAN 998 Asymetric asym50-998i (55) ISDN friendly PLAN 998 Asymetric asym50-998t (56) TLAN friendly PLAN 998 Asymetric asym50-998s (57) ADSL soft mode Asymetric asym50-998n-4b(58) PLAN998 Asymmetric 13/50 4 band asym50-998i-4b(59) ISDN friendly PLAN 998 13/50 4 band asym50-998a-4b(60) ADSL friendly PLAN 998 13/50 4 band sym25-997a(61) ADSL friendly PLAN 997 Symmetric 25/25 sym25-997i(62) ISDN friendly PLAN 997 symmetric 25/25 asym70-998n(63) PLAN998 Asymmetric 30/70 5 band asym70-998i(64) ISDN friendly PLAN 998 asymmetric 30/70 5 band asym70-998a(65) ADSL friendly PLAN 998 asymmetric 30/70 5 band asym100-998n(66) PLAN 998n Asymmetric for 6Band DMT 100M asym100-998i(67) PLAN 998i Asymmetric for 6Band DMT 100M asym100-998a(68) PLAN 998a Asymmetric for 6Band DMT 100M sym100-100-998n(69) PLAN 998n Symmetric for 6Band DMT 100/100M sym100-100-998i(70) PLAN 998i Symmetric for 6Band DMT 100/100M sym100-100-998a(71) PLAN 998a Symmetric for 6Band DMT 100/100M Enumeration: 'asym70-998a': 65, 'asym18': 12, 'asym50-998e': 52, 'asym11': 1, 'tl16': 8, 'asym50-998a-4b': 60, 'asym100-998i': 67, 'tl13': 7, 'sym25-997i': 62, 'asym50-998i-4b': 59, 'tl16a': 9, 'sym25-997a': 61, 'asym100-998a': 68, 'a-asym13': 6, 'a-asym11': 3, 'asym50-998n-4b': 58, 'asym26': 14, 'asym24': 11, 'asym25': 13, 'sym11': 2, 'asym50-998a': 54, 'asym70-998i': 64, 'asym50-998n': 51, 'asym50-998i': 55, 'asym70-998n': 63, 'asym50-998t': 56, 'asym50-998s': 57, 'sym100-100-998a': 71, 'sym100-100-998i': 70, 'sym100-100-998n': 69, 'sym16': 5, 'a-sym13': 4, 'sym25-997': 53, 'a-sym11': 0, 'notavailable': -1, 'asym100-998n': 66.
                     dsVdslPortDownProfile 1.3.6.1.4.1.6296.9.1.1.2.8.1.6 integer read-write
dsVdsl Downstream profile ID. sym11 (2) Symmetric 11/11 asym11 (1) Asymmetric 3/11 a-sym11 (0) ADSL friendly symmetric 11/11 a-asym11 (3) ADSL friendly asymmetric 3/11 a-sym13 (4) ADSL friendly symmetric 13/13 a-asym13 (6) ADSL friendly asymmetric 3/13 sym16 (5) Symmetric 16/16 tl13 (7) T-LAN friendly 13/13 tl16 (8) T-LAN friendly 16/16 tl16a (9) T-LAN friendly 13/16A (QAM20 ONLY) asym24 (11) PLAN998 Asymmetric 8/24 (QAM20 ONLY) asym18 (12) PLAN998 Asymmetric 8/18 (QAM20 ONLY) asym25 (13) PLAN998 Asymmetric Enhanced 8/25(QAM20 ONLY) asym26 (14) PLAN998 Asymmetric Enhanced 8/26(QAM20 ONLY) asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PLAN 998 Asymetric asym50-998i (55) ISDN friendly PLAN 998 Asymetric asym50-998t (56) TLAN friendly PLAN 998 Asymetric asym50-998s (57) ADSL soft mode Asymetric asym50-998n-4b(58) PLAN998 Asymmetric 13/50 4 band asym50-998i-4b(59) ISDN friendly PLAN 998 13/50 4 band asym50-998a-4b(60) ADSL friendly PLAN 998 13/50 4 band sym25-997a(61) ADSL friendly PLAN 997 Symmetric 25/25 sym25-997i(62) ISDN friendly PLAN 997 symmetric 25/25 asym70-998n(63) PLAN998 Asymmetric 30/70 5 band asym70-998i(64) ISDN friendly PLAN 998 asymmetric 30/70 5 band asym70-998a(65) ADSL friendly PLAN 998 asymmetric 30/70 5 band asym100-998n(66) PLAN 998n Asymmetric for 6Band DMT 100M asym100-998i(67) PLAN 998i Asymmetric for 6Band DMT 100M asym100-998a(68) PLAN 998a Asymmetric for 6Band DMT 100M sym100-100-998n(69) PLAN 998n Symmetric for 6Band DMT 100/100M sym100-100-998i(70) PLAN 998i Symmetric for 6Band DMT 100/100M sym100-100-998a(71) PLAN 998a Symmetric for 6Band DMT 100/100M Enumeration: 'asym70-998a': 65, 'asym18': 12, 'asym50-998e': 52, 'asym11': 1, 'tl16': 8, 'asym50-998a-4b': 60, 'asym100-998i': 67, 'tl13': 7, 'sym25-997i': 62, 'asym50-998i-4b': 59, 'tl16a': 9, 'sym25-997a': 61, 'asym100-998a': 68, 'a-asym13': 6, 'a-asym11': 3, 'asym50-998n-4b': 58, 'asym26': 14, 'asym24': 11, 'asym25': 13, 'sym11': 2, 'asym50-998a': 54, 'asym70-998i': 64, 'asym50-998n': 51, 'asym50-998i': 55, 'asym70-998n': 63, 'asym50-998t': 56, 'asym50-998s': 57, 'sym100-100-998a': 71, 'sym100-100-998i': 70, 'sym100-100-998n': 69, 'sym16': 5, 'a-sym13': 4, 'sym25-997': 53, 'a-sym11': 0, 'notavailable': -1, 'asym100-998n': 66.
                     dsVdslPortUpPhysicalSpeed 1.3.6.1.4.1.6296.9.1.1.2.8.1.7 integer read-only
Upstream attainable speed of port. bits/second.
                     dsVdslPortDownPhysicalSpeed 1.3.6.1.4.1.6296.9.1.1.2.8.1.8 integer read-only
Downstream attainable speed of port. bits/second.
                     dsVdslPortUpSpeed 1.3.6.1.4.1.6296.9.1.1.2.8.1.9 integer read-only
Upstream speed of port. bits/second.
                     dsVdslPortDownSpeed 1.3.6.1.4.1.6296.9.1.1.2.8.1.10 integer read-only
Downstream speed of port. bits/second.
                     dsVdslPortServiceError 1.3.6.1.4.1.6296.9.1.1.2.8.1.11 integer read-only
The raw accumulating dsVdsl service Error count.
                     dsVdslPortErrorCRC 1.3.6.1.4.1.6296.9.1.1.2.8.1.12 integer read-only
The raw accumulating dsVdsl CRC Error count.
                     dsVdslPortErrorSecond 1.3.6.1.4.1.6296.9.1.1.2.8.1.13 integer read-only
The raw accumulating dsVdsl Error Second.
                     dsVdslPortErrorLOF 1.3.6.1.4.1.6296.9.1.1.2.8.1.14 integer read-only
The raw accumulating dsVdsl loss of frame.
                     dsVdslPortErrorLOS 1.3.6.1.4.1.6296.9.1.1.2.8.1.15 integer read-only
The raw accumulating dsVdsl loss of signal.
                     dsVdslPortErrorLPR 1.3.6.1.4.1.6296.9.1.1.2.8.1.16 integer read-only
The raw accumulating dsVdsl loss of power.
                     dsVdslPortErrorLOL 1.3.6.1.4.1.6296.9.1.1.2.8.1.17 integer read-only
The raw accumulating dsVdsl loss of link.
                     dsVdslPort15mElapsedTime 1.3.6.1.4.1.6296.9.1.1.2.8.1.18 integer read-only
The current elapsed time from reinitializing point per 15 minutes.
                     dsVdslPort1dayElapsedTime 1.3.6.1.4.1.6296.9.1.1.2.8.1.19 integer read-only
The current elapsed time from reinitializing point per 1 day.
                     dsVdslPortServiceErrorPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.20 integer read-only
The accumulating Serivce-Error count of previous 15 minute.
                     dsVdslPortServiceErrorCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.21 integer read-only
The accumulating Service-Error count of current 15 minute.
                     dsVdslPortErrorCRCPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.22 integer read-only
The accumulating CRC-error count of previous 15 minute.
                     dsVdslPortErrorCRCCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.23 integer read-only
The accumulating CRC-error count of current 15 minute.
                     dsVdslPortErrorSecondPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.24 integer read-only
The accumulating errored-second count of previous 15 minute.
                     dsVdslPortErrorSecondCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.25 integer read-only
The accumulating errored-second count of current 15 minute.
                     dsVdslPortErrorLOFPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.26 integer read-only
The accumulating loss-of-frame count of previous 15 minute.
                     dsVdslPortErrorLOFCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.27 integer read-only
The accumulating loss-of-frame count of current 15 minute.
                     dsVdslPortErrorLOSPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.28 integer read-only
The accumulating loss-of-signal count of previous 15 minute.
                     dsVdslPortErrorLOSCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.29 integer read-only
The accumulating loss-of-signal count of current 15 minute.
                     dsVdslPortErrorLPRPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.30 integer read-only
The accumulating loss-of-power count of previous 15 minute.
                     dsVdslPortErrorLPRCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.31 integer read-only
The accumulating loss-of-power count of current 15 minute.
                     dsVdslPortErrorLOLPrev15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.32 integer read-only
The accumulating loss-of-link count of previous 15 minute.
                     dsVdslPortErrorLOLCurr15m 1.3.6.1.4.1.6296.9.1.1.2.8.1.33 integer read-only
The accumulating loss-of-link count of current 15 minute.
                     dsVdslPortServiceErrorPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.34 integer read-only
The accumulating Serivce-Error count of previous 1 day.
                     dsVdslPortServiceErrorCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.35 integer read-only
The accumulating Service-Error count of current 1 day.
                     dsVdslPortErrorCRCPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.36 integer read-only
The accumulating CRC-error count of previous 1 day.
                     dsVdslPortErrorCRCCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.37 integer read-only
The accumulating CRC-error count of current 1 day.
                     dsVdslPortErrorSecondPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.38 integer read-only
The accumulating errored-second count of previous 1 day.
                     dsVdslPortErrorSecondCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.39 integer read-only
The accumulating errored-second count of current 1 day.
                     dsVdslPortErrorLOFPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.40 integer read-only
The accumulating loss-of-frame count of previous 1 day.
                     dsVdslPortErrorLOFCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.41 integer read-only
The accumulating loss-of-frame count of current 1 day.
                     dsVdslPortErrorLOSPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.42 integer read-only
The accumulating loss-of-signal count of previous 1 day.
                     dsVdslPortErrorLOSCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.43 integer read-only
The accumulating loss-of-signal count of current 1 day.
                     dsVdslPortErrorLPRPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.44 integer read-only
The accumulating loss-of-power count of previous 1 day.
                     dsVdslPortErrorLPRCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.45 integer read-only
The accumulating loss-of-power count of current 1 day.
                     dsVdslPortErrorLOLPrev1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.46 integer read-only
The accumulating loss-of-link count of previous 1 day.
                     dsVdslPortErrorLOLCurr1day 1.3.6.1.4.1.6296.9.1.1.2.8.1.47 integer read-only
The accumulating loss-of-link count of current 1 day
                     dsVdslPortUpSNR 1.3.6.1.4.1.6296.9.1.1.2.8.1.48 integer read-only
dsVdsl upstream SNR * 1000.
                     dsVdslPortDownSNR 1.3.6.1.4.1.6296.9.1.1.2.8.1.49 integer read-only
dsVdsl downstream SNR * 1000.
                     dsVdslPortUpSNRMargin 1.3.6.1.4.1.6296.9.1.1.2.8.1.50 integer read-only
dsVdsl upstream SNR Margin(CO SNR Margin).
                     dsVdslPortDownSNRMargin 1.3.6.1.4.1.6296.9.1.1.2.8.1.51 integer read-only
dsVdsl downstream SNR Margin(CPE SNR Margin).
                     dsVdslPortUpAttenuation 1.3.6.1.4.1.6296.9.1.1.2.8.1.52 integer read-only
dsVdsl upstream port attenuation(CO Attenuation).
                     dsVdslPortDownAttenuation 1.3.6.1.4.1.6296.9.1.1.2.8.1.53 integer read-only
dsVdsl downstream port attenuation(CPE Attenuation).
                     dsVdslPortOutPower 1.3.6.1.4.1.6296.9.1.1.2.8.1.54 integer read-only
dsVdsl port Output Power.
                     dsVdslPortWanInPkt 1.3.6.1.4.1.6296.9.1.1.2.8.1.55 integer read-only
dsVdsl WAN in-packet count.
                     dsVdslPortWanInErr 1.3.6.1.4.1.6296.9.1.1.2.8.1.56 integer read-only
dsVdsl WAN error packet count.
                     dsVdslPortWanOutPkt 1.3.6.1.4.1.6296.9.1.1.2.8.1.57 integer read-only
dsVdsl WAN out-packet count.
                     dsVdslPortWanReset 1.3.6.1.4.1.6296.9.1.1.2.8.1.58 integer read-write
Reaquire dsVdsl line SYNC. Enumeration: 'reset': 1.
                     dsVdslPortWanLoopbackAction 1.3.6.1.4.1.6296.9.1.1.2.8.1.59 integer read-write
Perform remote loopback ping test. Enumeration: 'loopbacktest': 1.
                     dsVdslPortWanLoopbackStatus 1.3.6.1.4.1.6296.9.1.1.2.8.1.60 integer read-only
Latest remote loopback test result. Enumeration: 'failed': 1, 'other': 0, 'succeeded': 2.
                     dsVdslPortWanAdminStatus 1.3.6.1.4.1.6296.9.1.1.2.8.1.61 integer read-write
Administrative status of WAN port Enumeration: 'down': 0, 'other': -1, 'up': 1.
                     dsVdslPortWanOperStatus 1.3.6.1.4.1.6296.9.1.1.2.8.1.62 integer read-only
Operational status of WAN port Enumeration: 'down': 0, 'other': -1, 'up': 1.
                     dsVdslPortVOCLinkStatus 1.3.6.1.4.1.6296.9.1.1.2.8.1.63 integer read-only
PC Ethernet link status through VOC channel. Enumeration: 'down': 2, 'up': 1.
                     dsVdslPortVOCLinkDuplex 1.3.6.1.4.1.6296.9.1.1.2.8.1.64 integer read-only
PC link duplex through VOC channel. Enumeration: 'notavailable': 3, 'full': 1, 'half': 2.
                     dsVdslPortVOCLinkSpeed 1.3.6.1.4.1.6296.9.1.1.2.8.1.65 integer read-only
PC link speed through VOC channel. bits/second(bps).
                     dsVdslPortOptionband 1.3.6.1.4.1.6296.9.1.1.2.8.1.66 integer read-write
dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) Enumeration: 'notavailable': -1, 'exclude': 4, 'annex-B-32-64': 3, 'annex-B-6-64': 1, 'annex-A-6-32': 2.
                     dsVdslPortHamband 1.3.6.1.4.1.6296.9.1.1.2.8.1.67 counter64 read-write
dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
                     dsVdslPortUpInterleave 1.3.6.1.4.1.6296.9.1.1.2.8.1.68 integer read-write
dsVdslPort Upstream Interleave delay.
                     dsVdslPortDownInterleave 1.3.6.1.4.1.6296.9.1.1.2.8.1.69 integer read-write
dsVdslPort Downstream Interleave delay.
                     dsVdslPortTargetUpSNRMargin 1.3.6.1.4.1.6296.9.1.1.2.8.1.70 integer read-write
dsVdsl Target upstream SNR Margin(CO SNR Margin).
                     dsVdslPortTargetDownSNRMargin 1.3.6.1.4.1.6296.9.1.1.2.8.1.71 integer read-write
dsVdsl Target downstream SNR Margin(CPE SNR Margin).
                     dsVdslPortPSDMaskLevel 1.3.6.1.4.1.6296.9.1.1.2.8.1.72 integer read-write
dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11) Enumeration: 'old-gains': 0, 'pSD-K': 11, 'aNSI-M2': 2, 'aNSI-M1': 1, 'aNNEX-F-8-5': 5, 'eTSI-M1-EX': 8, 'eTSI-M2-EX': 9, 'aNNEX-F-11-5': 10, 'eTSI-M1': 3, 'eTSI-M2': 4, 'aNSI-M1-EX': 6, 'aNSI-M2-EX': 7, 'notavailable': -1.
                     dsVdslPortPBOLength 1.3.6.1.4.1.6296.9.1.1.2.8.1.73 integer read-write
dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo1000m': 10, 'pbo700m': 7.
                     dsVdslPort15mElapsedTimeSeconds 1.3.6.1.4.1.6296.9.1.1.2.8.1.74 integer read-only
The current elapsed time from reinitializing point per 15 minutes in seconds.
                     dsVdslPort1dayElapsedTimeSeconds 1.3.6.1.4.1.6296.9.1.1.2.8.1.75 integer read-only
The current elapsed time from reinitializing point per 1 day in seconds.
                     dsVdslPortUpServiceProfile 1.3.6.1.4.1.6296.9.1.1.2.8.1.76 integer read-only
dsVdslPort upstream service profile.
                     dsVdslPortDownServiceProfile 1.3.6.1.4.1.6296.9.1.1.2.8.1.77 integer read-only
dsVdslPort downstream service profile.
                     dsVdslPortModemReset 1.3.6.1.4.1.6296.9.1.1.2.8.1.78 integer read-write
Reset the Modem. Enumeration: 'reset': 1.
                     dsVdslPortCPEVersion 1.3.6.1.4.1.6296.9.1.1.2.8.1.79 displaystring read-only
dsVdslPort CPE NOS informations. The format of value is 'OS1/OS2/ActiveOS'.
                     dsVdslPortCPEDownload 1.3.6.1.4.1.6296.9.1.1.2.8.1.80 integer read-write
Download the CPE NOS. no(0) : No CPE NOS download. yes(1) : Now downloading. done(2) : Download completed. fail(3) : Download fail. Enumeration: 'fail': 3, 'yes': 1, 'done': 2, 'no': 0.
                     dsVdslPortLineActiveTimePrev1Day 1.3.6.1.4.1.6296.9.1.1.2.8.1.81 integer read-only
The accumulating Line Active time of previous 1 day.
                     dsVdslPortLineActiveTimeCurr1Day 1.3.6.1.4.1.6296.9.1.1.2.8.1.82 integer read-only
The accumulating Line Active time of current 1 day.
                     dsVdslPortLineConfProfileClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.83 integer read-write
To remove the line configure profile assigned to a physical port for a particular feature. This value should have 1 that means clear Enumeration: 'clear': 1.
                     dsVdslPortAlarmConfProfileClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.84 integer read-write
To remove the alarm configure profile assigned to a physical port for a particular feature. This value should have 1 that means clear Enumeration: 'clear': 1.
                     dsVdslPortEwl 1.3.6.1.4.1.6296.9.1.1.2.8.1.86 integer read-only
Vdsl Port wire length.
                     dsVdslPortGhsNearEndEwl 1.3.6.1.4.1.6296.9.1.1.2.8.1.87 integer read-only
Vdsl Port Near End wire length.
                     dsVdslPortGhsFarEndEwl 1.3.6.1.4.1.6296.9.1.1.2.8.1.88 integer read-only
Vdsl Port Far End wire length.
                     dsVdslPortLineActiveTimeClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.89 integer read-write
To initialize Line Active time. Enumeration: 'clear': 1.
                     dsVdslPortServiceErrorClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.90 integer read-write
To initialize . Enumeration: 'clear': 1.
                     dsVdslPortErrorCRCClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.91 integer read-write
To initialize . Enumeration: 'clear': 1.
                     dsVdslPortErrorSecondClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.92 integer read-write
To initialize Count of ErrorSecond . Enumeration: 'clear': 1.
                     dsVdslPortErrorLOFClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.93 integer read-write
To initialize Count of the number of LOF . Enumeration: 'clear': 1.
                     dsVdslPortErrorLOSClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.94 integer read-write
To initialize Count of the number of LOS . Enumeration: 'clear': 1.
                     dsVdslPortErrorLPRClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.95 integer read-write
To initialize Count of the number of LPR . Enumeration: 'clear': 1.
                     dsVdslPortErrorLOLClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.96 integer read-write
To initialize Count of the number of LOL . Enumeration: 'clear': 1.
                     dsVdslPortErrorCountClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.106 integer read-write
To initialize all error-count-value. Enumeration: 'clear': 1.
                     dsVdslPortCpeErrorCRC 1.3.6.1.4.1.6296.9.1.1.2.8.1.108 integer read-only
.
                     dsVdslPortCpePerfLOF 1.3.6.1.4.1.6296.9.1.1.2.8.1.110 integer read-only
.
                     dsVdslPortCpePerfLos 1.3.6.1.4.1.6296.9.1.1.2.8.1.111 integer read-only
.
                     dsVdslPortCpePerfLol 1.3.6.1.4.1.6296.9.1.1.2.8.1.113 integer read-only
.
                     dsVdslPortCpePerfCountClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.114 integer read-write
. Enumeration: 'clear': 1.
                     dsVdslPortSuperFrameRxCount 1.3.6.1.4.1.6296.9.1.1.2.8.1.115 unsigned32 read-only
Rx SuperFrame Count.
                     dsVdslPortSuperFrameTxCount 1.3.6.1.4.1.6296.9.1.1.2.8.1.116 unsigned32 read-only
Tx SuperFrame Count.
                     dsVdslPortSuperFrameCountClear 1.3.6.1.4.1.6296.9.1.1.2.8.1.117 integer read-write
Rx SuperFrame Count Clear. Enumeration: 'clear': 1.
                     dsVdslPortPerfRxCRC 1.3.6.1.4.1.6296.9.1.1.2.8.1.119 integer read-only
Rx CRC Count.
                     dsVdslPortPerfTxCRC 1.3.6.1.4.1.6296.9.1.1.2.8.1.120 integer read-only
Tx CRC Count.
                     dsVdslPortStandard 1.3.6.1.4.1.6296.9.1.1.2.8.1.121 integer read-write
VDSL Standard. Enumeration: 'vdsl2': 2, 'vdsl': 1.
                     dsVdslPortLineProfile 1.3.6.1.4.1.6296.9.1.1.2.8.1.122 integer read-write
sym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), 8a(8), 8b(9), 8c(10), 8d(11), 12a(12), 12b(13), 17a(14), 30a(15), 12a997(16), 12b997(17), v17a_8k(18) Enumeration: 'sym100': 6, 'v30a': 15, 'sym50': 7, 'asym50-3b': 2, 'v12a997': 16, 'v17a': 14, 'v12b': 13, 'asym70': 4, 'v17a8k': 18, 'v12b997': 17, 'asym100': 5, 'asym50-4b': 3, 'v8c': 10, 'sym25': 1, 'v8a': 8, 'v8d': 11, 'v12a': 12, 'v8b': 9.
                     dsVdslPortMode 1.3.6.1.4.1.6296.9.1.1.2.8.1.123 integer read-write
normal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-safe(6) Enumeration: 'normal': 1, 'adsl2': 4, 'adsl-s': 6, 'adsl': 3, 'isdn': 2, 't-lan': 5.
                     dsVdslPortProfileSet 1.3.6.1.4.1.6296.9.1.1.2.8.1.124 integer read-write
. Enumeration: 'write': 1.
                     dsVdslPortUpboEnable 1.3.6.1.4.1.6296.9.1.1.2.8.1.126 integer read-write
. Enumeration: 'enable': 1, 'disable': 2.
                     dsVdslPortChannel 1.3.6.1.4.1.6296.9.1.1.2.8.1.127 integer read-write
. Enumeration: 'slow': 1, 'fast': 0.
                     dsVdslPortTCMAdmin 1.3.6.1.4.1.6296.9.1.1.2.8.1.128 integer read-write
. Enumeration: 'enable': 0, 'disable': 1.
                     dsVdslPortUpSNRMinMargin 1.3.6.1.4.1.6296.9.1.1.2.8.1.129 integer read-write
dsVdsl upstream Min SNR Margin(CO Min SNR Margin).
                     dsVdslPortDownSNRMinMargin 1.3.6.1.4.1.6296.9.1.1.2.8.1.130 integer read-write
dsVdsl downstream Min SNR Margin(CPE Min SNR Margin).
                     dsVdslPortUpINP 1.3.6.1.4.1.6296.9.1.1.2.8.1.131 integer read-write
dsVdsl upstream INP.
                     dsVdslPortDownINP 1.3.6.1.4.1.6296.9.1.1.2.8.1.132 integer read-write
dsVdsl downstream INP .
                     dsVdslPortMiiInBytes 1.3.6.1.4.1.6296.9.1.1.2.8.1.133 integer read-only
.
                     dsVdslPortMiiInBPS 1.3.6.1.4.1.6296.9.1.1.2.8.1.134 integer read-only
.
                     dsVdslPortMiiOutBytes 1.3.6.1.4.1.6296.9.1.1.2.8.1.135 integer read-only
.
                     dsVdslPortMiiOutBPS 1.3.6.1.4.1.6296.9.1.1.2.8.1.136 integer read-only
.
                     dsVdslPortHardwareAddress 1.3.6.1.4.1.6296.9.1.1.2.8.1.137 displaystring read-only
The Hardware Address of User.
                     dsVdslPortRedundancySet 1.3.6.1.4.1.6296.9.1.1.2.8.1.138 integer read-write
Redundancy Port Set. Enumeration: 'enable': 1, 'disable': 0.
                     dsVdslCpeNegoState 1.3.6.1.4.1.6296.9.1.1.2.8.1.139 integer read-write
The Nego mode of CPE Ethernet port. Enumeration: 'auto': 1, 'force': 0.
                     dsVdslCpeDuplex 1.3.6.1.4.1.6296.9.1.1.2.8.1.140 integer read-write
The Duplex state of CPE Ethernet port. Enumeration: 'full': 0, 'half': 1.
                     dsVdslCpeSpeed 1.3.6.1.4.1.6296.9.1.1.2.8.1.141 integer read-write
The Speed of CPE Ethernet port. Enumeration: 'hundred': 0, 'dix': 1.
                     dsVdslPortLinkUpTime 1.3.6.1.4.1.6296.9.1.1.2.8.1.142 integer read-only
LinkUp duration time of port.
                     dsVdslPortLastRetraingReason 1.3.6.1.4.1.6296.9.1.1.2.8.1.143 integer read-only
. Enumeration: 'crcFail': 6, 'inicrcFail': 7, 'lofFail': 5, 'reProvision': 2, 'adminControl': 1, 'lprFail': 3, 'losFail': 4.
                     dsVdslPortU0BandPBOLength 1.3.6.1.4.1.6296.9.1.1.2.8.1.145 integer read-write
dsVdsl U0 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo1000m': 10, 'pbo700m': 7.
                     dsVdslPortU1BandPBOLength 1.3.6.1.4.1.6296.9.1.1.2.8.1.146 integer read-write
dsVdsl U1 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo1000m': 10, 'pbo700m': 7.
                     dsVdslPortU2BandPBOLength 1.3.6.1.4.1.6296.9.1.1.2.8.1.147 integer read-write
dsVdsl U2 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo1000m': 10, 'pbo700m': 7.
                     dsVdslPortU3BandPBOLength 1.3.6.1.4.1.6296.9.1.1.2.8.1.148 integer read-write
dsVdsl U3 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo1000m': 10, 'pbo700m': 7.
                     dsVdslPortDownCurrAttainableRate 1.3.6.1.4.1.6296.9.1.1.2.8.1.149 gauge32 read-only
Indicates the maximum currently down attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are equal. Note: 1 kbps = 1000 bps.
                     dsVdslPortUpCurrAttainableRate 1.3.6.1.4.1.6296.9.1.1.2.8.1.150 gauge32 read-only
Indicates the maximum currently up attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are equal. Note: 1 kbps = 1000 bps.
             dsVdslSlotTable 1.3.6.1.4.1.6296.9.1.1.2.9 no-access
A list of dsVdslSlotEntry entries.
                 dsVdslSlotEntry 1.3.6.1.4.1.6296.9.1.1.2.9.1 no-access
An entry containing management information applicable to a particular dsVdsl Slot.
                     dsVdslSlotModuleIndex 1.3.6.1.4.1.6296.9.1.1.2.9.1.1 integer read-only
A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1.
                     dsVdslSlotIndex 1.3.6.1.4.1.6296.9.1.1.2.9.1.2 integer read-only
A unique value, greater than zero, for each slot. It is recommended that values are assigned contiguously starting from 1.
                     dsVdslSlotType 1.3.6.1.4.1.6296.9.1.1.2.9.1.3 displaystring read-only
The type of each slot. This string defines the type of slot ex) Vdsl, GBIC.
                     dsVdslSlotInstallStatus 1.3.6.1.4.1.6296.9.1.1.2.9.1.4 integer read-only
The current install status of each slot. Enumeration: 'removed': 2, 'installed': 1.
                     dsVdslSlotProfile 1.3.6.1.4.1.6296.9.1.1.2.9.1.5 integer read-write
dsVdsl profile ID. asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PLAN 998 Asymetric asym50-998i (55) ISDN friendly PLAN 998 Asymetric asym50-998t (56) TLAN friendly PLAN 998 Asymetric asym50-998s (57) ADSL soft mode Asymetric asym50-998n-4b(58) PLAN998 Asymmetric 13/50 4 band asym50-998i-4b(59) ISDN friendly PLAN 998 13/50 4 band asym50-998a-4b(60) ADSL friendly PLAN 998 13/50 4 band sym25-997a(61) ADSL friendly PLAN 997 Symmetric 25/25 sym25-997i(62) ISDN friendly PLAN 997 symmetric 25/25 asym70-998n(63) PLAN998 Asymmetric 30/70 5 band asym70-998i(64) ISDN friendly PLAN 998 asymmetric 30/70 5 band asym70-998a(65) ADSL friendly PLAN 998 asymmetric 30/70 5 band asym100-998n(66) PLAN 998n Asymmetric for 6Band DMT 100M asym100-998i(67) PLAN 998i Asymmetric for 6Band DMT 100M asym100-998a(68) PLAN 998a Asymmetric for 6Band DMT 100M sym100-100-998n(69) PLAN 998n Symmetric for 6Band DMT 100/100M sym100-100-998i(70) PLAN 998i Symmetric for 6Band DMT 100/100M sym100-100-998a(71) PLAN 998a Symmetric for 6Band DMT 100/100M Enumeration: 'asym50-998a-4b': 60, 'asym100-998i': 67, 'asym100-998n': 66, 'sym25-997i': 62, 'asym50-998i-4b': 59, 'asym100-998a': 68, 'sym25-997a': 61, 'asym50-998n-4b': 58, 'asym70-998a': 65, 'asym50-998e': 52, 'asym50-998a': 54, 'asym70-998i': 64, 'asym50-998n': 51, 'asym50-998i': 55, 'asym70-998n': 63, 'asym50-998t': 56, 'asym50-998s': 57, 'sym100-100-998a': 71, 'sym100-100-998i': 70, 'sym100-100-998n': 69, 'sym25-997': 53, 'notavailable': -1.
                     dsVdslSlotOptionband 1.3.6.1.4.1.6296.9.1.1.2.9.1.6 integer read-write
dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4) Enumeration: 'notavailable': -1, 'exclude': 4, 'annex-B-32-64': 3, 'annex-B-6-64': 1, 'annex-A-6-32': 2.
                     dsVdslSlotHamband 1.3.6.1.4.1.6296.9.1.1.2.9.1.7 counter64 read-write
dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
                     dsVdslSlotPSDMaskLevel 1.3.6.1.4.1.6296.9.1.1.2.9.1.8 integer read-write
dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11) Enumeration: 'old-gains': 0, 'pSD-K': 11, 'aNSI-M2': 2, 'aNSI-M1': 1, 'aNNEX-F-8-5': 5, 'eTSI-M1-EX': 8, 'eTSI-M2-EX': 9, 'aNNEX-F-11-5': 10, 'eTSI-M1': 3, 'eTSI-M2': 4, 'aNSI-M1-EX': 6, 'aNSI-M2-EX': 7, 'notavailable': -1.
                     dsVdslSlotPBOLength 1.3.6.1.4.1.6296.9.1.1.2.9.1.9 integer read-write
dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo700m': 7.
                     dsVdslSlotUpServiceProfile 1.3.6.1.4.1.6296.9.1.1.2.9.1.10 integer read-only
dsVdsl slot upstream service profile.
                     dsVdslSlotDownServiceProfile 1.3.6.1.4.1.6296.9.1.1.2.9.1.11 integer read-only
dsVdsl slot downstream service profile.
                     dsVdslSlotLIUReboot 1.3.6.1.4.1.6296.9.1.1.2.9.1.12 integer read-write
dsVdsl LIU slot reboot. Enumeration: 'reboot': 1.
                     dsVdslSlotLIUCPENOSStore 1.3.6.1.4.1.6296.9.1.1.2.9.1.13 integer read-write
Store CPE NOS into each dsVdsl slot. no(0) : No CPE NOS store. yes(1) : Now storing. done(2) : Storing completed. fail(3) : Storing fail Enumeration: 'fail': 3, 'yes': 1, 'done': 2, 'no': 0.
             dsSystemSlotTable 1.3.6.1.4.1.6296.9.1.1.2.10 no-access
A list of slotEntry entries.
                   dsSystemSlotEntry 1.3.6.1.4.1.6296.9.1.1.2.10.1 no-access
An entry containing management information applicable to a particular switch Slot.
                       dsSystemSlotModuleIndex 1.3.6.1.4.1.6296.9.1.1.2.10.1.1 integer read-only
A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1.
                       dsSystemSlotIndex 1.3.6.1.4.1.6296.9.1.1.2.10.1.2 integer read-only
A unique value, greater than zero, for each slot. It is recommended that values are assigned contiguously starting from 1.
                       dsSystemSlotType 1.3.6.1.4.1.6296.9.1.1.2.10.1.3 displaystring read-only
The type of each slot. This string defines the type of slot ex) TX-10/100, FX-100, GBIC, SWU, ADSL2+, ADSL, SHDSL, Vdsl, Ethernet
                       dsSystemSlotInstallStatus 1.3.6.1.4.1.6296.9.1.1.2.10.1.4 integer read-only
The current install status of each slot. Enumeration: 'uninstalled': 2, 'removed': 0, 'installed': 1.
                       dsSystemSlotStatus 1.3.6.1.4.1.6296.9.1.1.2.10.1.5 integer read-only
The current slot status Enumeration: 'reset': 5, 'run': 4, 'max': 6, 'init': 2, 'idle': 0, 'ready': 3, 'equip': 1.
                       dsSystemSlotPortNum 1.3.6.1.4.1.6296.9.1.1.2.10.1.6 integer read-only
The number of port on the slot.
             dsSwitchUserMacTable 1.3.6.1.4.1.6296.9.1.1.2.11 no-access
A list of dsSwitchUserMacEntry entries.
                   dsSwitchUserMacEntry 1.3.6.1.4.1.6296.9.1.1.2.11.1 no-access
An entry containing management information applicable to a particular switch User mac address.
                       dsUserMacModuleIndex 1.3.6.1.4.1.6296.9.1.1.2.11.1.1 integer read-only
A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1.
                       dsUserMacPortIndex 1.3.6.1.4.1.6296.9.1.1.2.11.1.2 integer read-only
A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1.
                       dsUserMacAddress1 1.3.6.1.4.1.6296.9.1.1.2.11.1.3 physaddress read-only
The first entry of lastest user mac address.
                       dsUserMacAddress2 1.3.6.1.4.1.6296.9.1.1.2.11.1.4 physaddress read-only
The second entry of lastest user mac address.
                       dsUserMacAddress3 1.3.6.1.4.1.6296.9.1.1.2.11.1.5 physaddress read-only
The third entry of lastest user mac address.
                       dsUserMacAddress4 1.3.6.1.4.1.6296.9.1.1.2.11.1.6 physaddress read-only
The fourth entry of lastest user mac address.
                       dsUserMacAddress5 1.3.6.1.4.1.6296.9.1.1.2.11.1.7 physaddress read-only
The fifth entry of lastest user mac address.
                       dsUserMacAddress6 1.3.6.1.4.1.6296.9.1.1.2.11.1.8 physaddress read-only
The sixth entry of lastest user mac address.
                       dsUserMacAddress7 1.3.6.1.4.1.6296.9.1.1.2.11.1.9 physaddress read-only
The seventh entry of lastest user mac address.
                       dsUserMacAddress8 1.3.6.1.4.1.6296.9.1.1.2.11.1.10 physaddress read-only
The eighth entry of lastest user mac address.
             dsSwitchAtTable 1.3.6.1.4.1.6296.9.1.1.2.12 no-access
A list of dsSwitchUserMacEntry entries.
                   dsSwitchAtEntry 1.3.6.1.4.1.6296.9.1.1.2.12.1 no-access
An entry containing management information applicable to a particular switch ARP.
                       dsSwitchAtifIndex 1.3.6.1.4.1.6296.9.1.1.2.12.1.1 integer read-only
It means that the ifIndex in MIB-II Interface of physical port..
                       dsSwitchAtNetAddress 1.3.6.1.4.1.6296.9.1.1.2.12.1.2 ipaddress read-only
The IP address in ARP informations.
                       dsSwitchAtMacAddress 1.3.6.1.4.1.6296.9.1.1.2.12.1.3 physaddress read-only
The physical address in ARP informations.
                       dsSwitchAtVID 1.3.6.1.4.1.6296.9.1.1.2.12.1.4 integer read-only
The VLAN ID in ARP informations.
             dsNetworkTimeProtocolInfo 1.3.6.1.4.1.6296.9.1.1.2.17
                   dsNTPMode 1.3.6.1.4.1.6296.9.1.1.2.17.1 integer read-write
The mode of Network Time Protocol.. Enumeration: 'ntp': 1, 'disable': 3, 'sntp': 2.
                   dsNTPBindAddressType 1.3.6.1.4.1.6296.9.1.1.2.17.2 inetaddresstype read-write
The bind-address Type of Network Time Protocol..
                   dsNTPBindAddress 1.3.6.1.4.1.6296.9.1.1.2.17.3 inetaddress read-write
The bind-address of Network Time Protocol..
                   dsNTPServerTable 1.3.6.1.4.1.6296.9.1.1.2.17.10 no-access
A list of dsNTPServerEntry entries.
                         dsNTPServerEntry 1.3.6.1.4.1.6296.9.1.1.2.17.10.1 no-access
An entry containing Network Time Protocol information.
                             dsNTPServerIndex 1.3.6.1.4.1.6296.9.1.1.2.17.10.1.1 integer read-write
A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
                             dsNTPServerName 1.3.6.1.4.1.6296.9.1.1.2.17.10.1.2 octet string read-write
.
                             dsNTPServerRowStatus 1.3.6.1.4.1.6296.9.1.1.2.17.10.1.3 integer read-write
. Enumeration: 'active': 1, 'destroy': 3, 'create': 2.
             dsDomainNameServiceInfo 1.3.6.1.4.1.6296.9.1.1.2.18
                   dsDNSDomainName 1.3.6.1.4.1.6296.9.1.1.2.18.1 octet string read-write
.
                   dsDNSServerTable 1.3.6.1.4.1.6296.9.1.1.2.18.10 no-access
A list of dsNTPServerEntry entries.
                         dsDNSServerEntry 1.3.6.1.4.1.6296.9.1.1.2.18.10.1 no-access
An entry containing Network Time Protocol information.
                             dsDNSServerIndex 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.1 integer read-write
A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
                             dsDNSServerAddressType 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.2 inetaddresstype read-write
.
                             dsDNSServerAddress 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.3 inetaddress read-write
.
                             dsDNSServerRowStatus 1.3.6.1.4.1.6296.9.1.1.2.18.10.1.4 integer read-write
. Enumeration: 'active': 1, 'destroy': 3, 'create': 2.
             dsSyslogInfo 1.3.6.1.4.1.6296.9.1.1.2.19
                   dsSyslogBindAddressType 1.3.6.1.4.1.6296.9.1.1.2.19.1 inetaddresstype read-write
.
                   dsSyslogBindAddress 1.3.6.1.4.1.6296.9.1.1.2.19.2 inetaddress read-write
.
                   dsSyslogLocalCode 1.3.6.1.4.1.6296.9.1.1.2.19.3 integer read-write
.
                   dsSyslogConfTable 1.3.6.1.4.1.6296.9.1.1.2.19.10 no-access
A list of dsSyslogConfEntry entries.
                         dsSyslogConfEntry 1.3.6.1.4.1.6296.9.1.1.2.19.10.1 no-access
An entry containing Syslog Configuration information.
                             dsSyslogConfIndex 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.1 integer read-write
A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
                             dsSyslogConfFacility 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.2 integer read-write
. Enumeration: 'kernel': 0, 'cron': 9, 'syslog': 5, 'news': 7, 'authPriv': 10, 'ftp': 11, 'uucp': 8, 'console': 14, 'mail': 2, 'ntp': 12, 'auth': 4, 'user': 1, 'local5': 21, 'local4': 20, 'local7': 23, 'local6': 22, 'local1': 17, 'local0': 16, 'local3': 19, 'local2': 18, 'daemon': 3, 'lpr': 6, 'security': 13.
                             dsSyslogConfSeverity 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.3 integer read-write
. Enumeration: 'info': 6, 'notice': 5, 'err': 3, 'all': 99, 'alert': 1, 'debug': 7, 'emerg': 0, 'crit': 2, 'warning': 4.
                             dsSyslogConfTarget 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.4 integer read-write
. Enumeration: 'console': 1, 'local': 0, 'remote': 2.
                             dsSyslogConfStorage 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.5 integer read-write
. Enumeration: 'volatile': 0, 'non-volatile': 1.
                             dsSyslogConfRemoteAddrType 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.6 inetaddresstype read-write
.
                             dsSyslogConfRemoteAddress 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.7 inetaddress read-write
.
                             dsSyslogConfRowStatus 1.3.6.1.4.1.6296.9.1.1.2.19.10.1.8 integer read-write
. Enumeration: 'active': 1, 'destroy': 3, 'create': 2.
             dsTcTable 1.3.6.1.4.1.6296.9.1.1.2.20 no-access
A list of dsTcEntrry entries.
                   dsTcEntry 1.3.6.1.4.1.6296.9.1.1.2.20.1 no-access
An entry containing dsTc information.
                       dsTcNodeIndex 1.3.6.1.4.1.6296.9.1.1.2.20.1.1 integer read-only
A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
                       dsTcIndex 1.3.6.1.4.1.6296.9.1.1.2.20.1.2 integer read-only
A unique value, greater than zero, for each dsTc. It is recommended that values are assinged contiguously starting from 1.
                       dsTcGuaranteedBandwidth 1.3.6.1.4.1.6296.9.1.1.2.20.1.3 integer read-write
It means reserved bandwidth of route applied to processing protocol. Bandwidth can be from 1 to 16Gbps.
                       dsTcMaxBandwidth 1.3.6.1.4.1.6296.9.1.1.2.20.1.4 integer read-write
It means maximum bandwidth of route applied to processing protocol. Bandwidth can be from 1 to 16Gbps.
                       dsTcWeight 1.3.6.1.4.1.6296.9.1.1.2.20.1.5 integer read-write
It means weight limit of route applied to processing protocol. Weight limit can be from 1 to 1024.
                       dsTcReset 1.3.6.1.4.1.6296.9.1.1.2.20.1.6 integer read-write
Reset configuration about route applied to processing protocol Enumeration: 'reset': 1.
                       dsTcStatsCount 1.3.6.1.4.1.6296.9.1.1.2.20.1.7 counter64 read-only
The total bits number of packets matching with a tc configuration, the counter value is a cumulative sum
                       dsTcStatsCount5Sec 1.3.6.1.4.1.6296.9.1.1.2.20.1.8 integer read-only
The average bps of packets matching with dsTc configuration during 5 sec.
                       dsTcStatsCount1Min 1.3.6.1.4.1.6296.9.1.1.2.20.1.9 integer read-only
The average bps of packets matching with dsTc configuration during 1 minutes.
                       dsTcStatsCount10Min 1.3.6.1.4.1.6296.9.1.1.2.20.1.10 integer read-only
The average bps of packets matching with dsTc configuration during 10 minutes.
                       dsTcStatsCountReset 1.3.6.1.4.1.6296.9.1.1.2.20.1.11 integer read-write
Reset Tc Statistics Counter Registers including tcStatsCount, tcStatsCount5Sec, tcStatsCount1Min and tcStatsCount10Min Enumeration: 'reset': 1.
             dsVdslLineConfProfileTable 1.3.6.1.4.1.6296.9.1.1.2.25 no-access
This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the VDSL line. Entries in this table MUST be maintained in a persistent manner.
                   dsVdslLineConfProfileEntry 1.3.6.1.4.1.6296.9.1.1.2.25.1 no-access
Each entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document.
                       dsVdslLineConfProfileName 1.3.6.1.4.1.6296.9.1.1.2.25.1.1 displaystring no-access
This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document.
                       dsVdslLineConfDownMaxSnrMgn 1.3.6.1.4.1.6296.9.1.1.2.25.1.4 unsigned32 read-only
Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
                       dsVdslLineConfDownMinSnrMgn 1.3.6.1.4.1.6296.9.1.1.2.25.1.5 unsigned32 read-only
Specifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
                       dsVdslLineConfDownTargetSnrMgn 1.3.6.1.4.1.6296.9.1.1.2.25.1.6 unsigned32 read-only
Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.
                       dsVdslLineConfUpMaxSnrMgn 1.3.6.1.4.1.6296.9.1.1.2.25.1.7 unsigned32 read-only
Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
                       dsVdslLineConfUpMinSnrMgn 1.3.6.1.4.1.6296.9.1.1.2.25.1.8 unsigned32 read-only
Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
                       dsVdslLineConfUpTargetSnrMgn 1.3.6.1.4.1.6296.9.1.1.2.25.1.9 unsigned32 read-only
Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.
                       dsVdslLineConfDownMaxDataRate 1.3.6.1.4.1.6296.9.1.1.2.25.1.10 unsigned32 read-only
Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and slow channel data rates.
                       dsVdslLineConfDownMinDataRate 1.3.6.1.4.1.6296.9.1.1.2.25.1.11 unsigned32 read-only
Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and slow channel data rates.
                       dsVdslLineConfUpMaxDataRate 1.3.6.1.4.1.6296.9.1.1.2.25.1.12 unsigned32 read-only
Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second.
                       dsVdslLineConfUpMinDataRate 1.3.6.1.4.1.6296.9.1.1.2.25.1.13 unsigned32 read-only
Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second.
                       dsVdslLineConfDownMaxInterDelay 1.3.6.1.4.1.6296.9.1.1.2.25.1.16 integer read-only
Specifies the maximum interleave delay for the downstream slow channel.
                       dsVdslLineConfUpMaxInterDelay 1.3.6.1.4.1.6296.9.1.1.2.25.1.17 integer read-only
Specifies the maximum interleave delay for the upstream slow channel.
                       dsVdslLineConfHamband 1.3.6.1.4.1.6296.9.1.1.2.25.1.20 counter64 read-write
dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
                       dsVdslLineConfDownINP 1.3.6.1.4.1.6296.9.1.1.2.25.1.21 integer read-write
Vdsl downstream INP .
                       dsVdslLineConfUpINP 1.3.6.1.4.1.6296.9.1.1.2.25.1.22 integer read-write
Vdsl upstream INP.
                       dsVdslLineConfPBOLength 1.3.6.1.4.1.6296.9.1.1.2.25.1.23 integer read-only
dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10) Enumeration: 'pbo500m': 5, 'pbo300m': 3, 'pbo600m': 6, 'pbo200m': 2, 'pbo800m': 8, 'pbo900m': 9, 'pbo400m': 4, 'pbo100m': 1, 'pbo1000m': 10, 'pbo700m': 7.
                       dsVdslLineConfPSDMaskLevel 1.3.6.1.4.1.6296.9.1.1.2.25.1.24 integer read-only
dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11) Enumeration: 'old-gains': 0, 'pSD-K': 11, 'aNSI-M2': 2, 'aNSI-M1': 1, 'aNNEX-F-8-5': 5, 'eTSI-M1-EX': 8, 'eTSI-M2-EX': 9, 'aNNEX-F-11-5': 10, 'eTSI-M1': 3, 'eTSI-M2': 4, 'aNSI-M1-EX': 6, 'aNSI-M2-EX': 7, 'notavailable': -1.
                       dsVdslLineConfTCMAdmin 1.3.6.1.4.1.6296.9.1.1.2.25.1.25 integer read-write
. Enumeration: 'enable': 0, 'disable': 1.
                       dsVdslLineConfUpboEnable 1.3.6.1.4.1.6296.9.1.1.2.25.1.26 integer read-write
. Enumeration: 'enable': 1, 'disable': 2.
                       dsVdslLineConfChannel 1.3.6.1.4.1.6296.9.1.1.2.25.1.27 integer read-write
. Enumeration: 'slow': 1, 'fast': 0.
                       dsVdslLineConfProfRowStatus 1.3.6.1.4.1.6296.9.1.1.2.25.1.28 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines.
             dsVdslCpeCountTable 1.3.6.1.4.1.6296.9.1.1.2.26 no-access
.
                   dsVdslCpeCountEntry 1.3.6.1.4.1.6296.9.1.1.2.26.1 no-access
.
                       dsVdslCpeCountFeFECB0 1.3.6.1.4.1.6296.9.1.1.2.26.1.1 integer read-only
.
                       dsVdslCpeCountFeFECB1 1.3.6.1.4.1.6296.9.1.1.2.26.1.2 integer read-only
.
                       dsVdslCpeCountFeCRCB0 1.3.6.1.4.1.6296.9.1.1.2.26.1.3 integer read-only
.
                       dsVdslCpeCountFeCRCB1 1.3.6.1.4.1.6296.9.1.1.2.26.1.4 integer read-only
.
                       dsVdslCpeCountFeFLOS 1.3.6.1.4.1.6296.9.1.1.2.26.1.5 integer read-only
.
                       dsVdslCpeCountFeSEF 1.3.6.1.4.1.6296.9.1.1.2.26.1.6 integer read-only
.
                       dsVdslCpeCountFeFECUnCrrB0 1.3.6.1.4.1.6296.9.1.1.2.26.1.7 integer read-only
.
                       dsVdslCpeCountFeFECUnCrrB1 1.3.6.1.4.1.6296.9.1.1.2.26.1.8 integer read-only
.
                       dsVdslCpeCountTxFrameCnt 1.3.6.1.4.1.6296.9.1.1.2.26.1.9 integer read-only
.
                       dsVdslCpeCountRxFrameCnt 1.3.6.1.4.1.6296.9.1.1.2.26.1.10 integer read-only
.
                       dsVdslCpeCountTxCrcCnt 1.3.6.1.4.1.6296.9.1.1.2.26.1.11 integer read-only
.
                       dsVdslCpeCountRxCrcCnt 1.3.6.1.4.1.6296.9.1.1.2.26.1.12 integer read-only
.
                       dsVdslCpeCountDropFrameCnt 1.3.6.1.4.1.6296.9.1.1.2.26.1.13 integer read-only
.
             dsVdslCoCountTable 1.3.6.1.4.1.6296.9.1.1.2.27 no-access
.
                   dsVdslCoCountEntry 1.3.6.1.4.1.6296.9.1.1.2.27.1 no-access
.
                       dsVdslCoCountRxFrame 1.3.6.1.4.1.6296.9.1.1.2.27.1.1 integer read-only
.
                       dsVdslCoCountRxCrcErr 1.3.6.1.4.1.6296.9.1.1.2.27.1.2 integer read-only
.
                       dsVdslCoCountRxDrop 1.3.6.1.4.1.6296.9.1.1.2.27.1.3 integer read-only
.
                       dsVdslCoCountTxFrame 1.3.6.1.4.1.6296.9.1.1.2.27.1.4 integer read-only
.
                       dsVdslCoCountTxDrop 1.3.6.1.4.1.6296.9.1.1.2.27.1.5 integer read-only
.
                       dsVdslCoCountEnetCrcErrCnt 1.3.6.1.4.1.6296.9.1.1.2.27.1.6 integer read-only
.
             dsVdslCpeInfoTable 1.3.6.1.4.1.6296.9.1.1.2.28 no-access
This table contains information of the CPEs.
                   dsVdslCpeInfoEntry 1.3.6.1.4.1.6296.9.1.1.2.28.1 no-access
Each entry consists of a list of parameters that represents the information of a CPE.
                       dsVdslCpeVersion 1.3.6.1.4.1.6296.9.1.1.2.28.1.1 displaystring read-only
CPE NOS version
                       dsVdslCpeVendorId 1.3.6.1.4.1.6296.9.1.1.2.28.1.2 displaystring read-only
CPE vendor ID
                       dsVdslCpeVendorName 1.3.6.1.4.1.6296.9.1.1.2.28.1.3 displaystring read-only
CPE vendor name
                       dsVdslCpeModelName 1.3.6.1.4.1.6296.9.1.1.2.28.1.4 displaystring read-only
CPE model name
                       dsVdslCpeSerialNumber 1.3.6.1.4.1.6296.9.1.1.2.28.1.5 displaystring read-only
CPE serial number