DANTHERM-COOLING-MIB: View SNMP OID List / Download MIB

VENDOR: DANTHERM COOLING


 Home MIB: DANTHERM-COOLING-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 danthermCooling 1.3.6.1.4.1.46651
             controllerCC3000 1.3.6.1.4.1.46651.1
                 systemStatus 1.3.6.1.4.1.46651.1.1
                     onBoardTempr 1.3.6.1.4.1.46651.1.1.1 integer read-only
Controller On-Board temperature in Degree Celcius
                     roomTempr 1.3.6.1.4.1.46651.1.1.2 integer read-only
Room Sensor or Zone 1 Sensor temperature in Degree Celcius
                     hotSpotTempr 1.3.6.1.4.1.46651.1.1.3 integer read-only
Hot Spot Sensor or Zone 2 Sensor temperature in Degree Celcius
                     outdoor1Tempr 1.3.6.1.4.1.46651.1.1.4 integer read-only
Ambient Sensor 1 or Zone 1 Ambient Sensor. temperature in Degree Celcius
                     outdoor2Tempr 1.3.6.1.4.1.46651.1.1.5 integer read-only
Ambient Sensor 2 or Zone 2 Ambient Sensor. temperature in Degree Celcius
                     shelterTempr 1.3.6.1.4.1.46651.1.1.6 integer read-only
Shelter Temperature. Valid for Single-Zone solution
                     outdoorCombinedTempr 1.3.6.1.4.1.46651.1.1.7 integer read-only
Cobined minimum Outdoor Temeperature. Valid for Single-Zone solution
                     fan1RPM 1.3.6.1.4.1.46651.1.1.8 integer read-only
Fan 1 Rotation Per Minute
                     fan2RPM 1.3.6.1.4.1.46651.1.1.9 integer read-only
Fan 2 Rotation Per Minute
                     fan1SpeedPercentage 1.3.6.1.4.1.46651.1.1.10 integer read-only
Fan 1 Speed in Percentage of Maximum Speed. Also represents Duty-Cycle of FAn Signal
                     fan2SpeedPercentage 1.3.6.1.4.1.46651.1.1.11 integer read-only
Fan 2 Speed in Percentage of Maximum Speed. Also represents Duty-Cycle of FAn Signal
                     damper1Position 1.3.6.1.4.1.46651.1.1.12 integer read-only
Damper 1 Shutter Open Percentage. 0% - Damper Closed. 100% - Damper completely open
                     damper2Position 1.3.6.1.4.1.46651.1.1.13 integer read-only
Damper 2 Shutter Open Percentage. 0% - Damper Closed. 100% - Damper completely open
                     humidity 1.3.6.1.4.1.46651.1.1.14 integer read-only
Internal or external humidity in Rh%
                     dewpoint 1.3.6.1.4.1.46651.1.1.15 integer read-only
Internal or external DewPoint based on Humidity; in Degree Celcius
                     atmosphericPressure 1.3.6.1.4.1.46651.1.1.16 integer read-only
Atmospheric pressure or Pressure of installed enclosure in KiloPascal
                     flowPressure 1.3.6.1.4.1.46651.1.1.17 integer read-only
Filter flow Pressure in Pascal
                     fan1Status 1.3.6.1.4.1.46651.1.1.18 integer read-only
Fan 1 operation status. 0 - Off; 1 - On -; 2 - Emergency/Boost
                     fan2Status 1.3.6.1.4.1.46651.1.1.19 integer read-only
Fan 2 operation status. 0 - Off; 1 - On -; 2 - Emergency/Boost
                     damper1Status 1.3.6.1.4.1.46651.1.1.20 integer read-only
Damper 1 operation status. 0 - Closed; 1 - Open; 2 - Dynamic or Temperature Compensation; 2 - Emergency/Boost
                     damper2Status 1.3.6.1.4.1.46651.1.1.21 integer read-only
Damper 2 Shutter Open Percentage. 0 - Closed; 1 - Open; 2 - Dynamic or Temperature Compensation; 2 - Emergency/Boost
                     aircond1Status 1.3.6.1.4.1.46651.1.1.22 integer read-only
Airconditioner 1 operation status. 0 - Off; 1 - Restart timeout; 2 - On
                     aircond2Status 1.3.6.1.4.1.46651.1.1.23 integer read-only
Airconditioner 2 operation status. 0 - Off; 1 - Restart timeout; 2 - On
                     heaterStatus 1.3.6.1.4.1.46651.1.1.24 integer read-only
heater operation status. 0 - Off; 1 - On
                     shelter1Status 1.3.6.1.4.1.46651.1.1.25 integer read-only
Shelter Status in Single-Zone mode or Zone 1 Status in Dual-Zone mode respectively. 0 - Inactive or None State 1 - Heating State 2 - Re-Cycling State 3 - Free Cooling State 4 - Active or Aircon Coolign State 5 - Emergency State 6 - Intermediate state( strategy transistion)
                     shelter2Status 1.3.6.1.4.1.46651.1.1.26 integer read-only
Shelter Status in Dual-Zone mode or Zone 2 Status. 0 - Inactive or None State 1 - Heating State 2 - Re-Cycling State 3 - Free Cooling State 4 - Active or Aircon Coolign State 5 - Emergency State 6 - Intermediate state( strategy transistion)
                     shelter1Mode 1.3.6.1.4.1.46651.1.1.27 integer read-only
Shelter Run time mode in Single-Zone mode or Zone 1 Status in Dual-Zone mode respectively. 0 - Free Cooling Mode 1 - Standard Mode 2 - Power Save Mode 3 - Air conditioner Mode
                     shelter2Mode 1.3.6.1.4.1.46651.1.1.28 integer read-only
Shelter Run time mode in Dual-Zone mode or Zone 2 Status. 0 - Free Cooling Mode 1 - Standard Mode 2 - Power Save Mode 3 - Air conditioner Mode
                     shelter1Setpoint 1.3.6.1.4.1.46651.1.1.29 integer read-only
Shelter run time Cooling Set point in Single-Zone mode or Zone 1 Status in Dual-Zone mode respectively. Cooling setpoint can be offset by following functions RH function Night mode Digital inputs
                     shelter2Setpoint 1.3.6.1.4.1.46651.1.1.30 integer read-only
Shelter run time Cooling Set point in Dual-Zone mode or Zone 2 Status. Cooling setpoint can be offset by following functions RH function Night mode Digital inputs
                     errorStatus 1.3.6.1.4.1.46651.1.1.31 integer read-only
controller internal error status. Binary bit position - alarm drive state: 0 - inactive , 1 - active 0 - voltage low 1 - voltage high 2 - tempr low 3 - tempr limit 1 4 - tempr limit 2 5 - tempr limit 3 6 - humid. low 7 - humid. high 8 - fltr pressure 1 9 - fltr pressure 2 10 - fan 1 11 - fan 2 12 - onboard sens 13 - room sens 14 - hotspot sens 15 - ambient 1 sens 16 - ambient 2 sens 17 - dig 1 i/p 18 - dig 2 i/p 19 - dig 3 i/p 20 - filter i/p 1 21 - filter i/p 2 22 - network 23 - int storage 24 - sd card
                     maskedErrorStatus 1.3.6.1.4.1.46651.1.1.32 integer read-only
Controller Output Error status. Binary Bit Position - Alarm Drive State: 0 - Inactive , 1 - Active 0 - Voltage Low 1 - Voltage High 2 - Tempr Low 3 - Tempr Limit 1 4 - Tempr Limit 2 5 - Tempr Limit 3 6 - Humid. Low 7 - Humid. High 8 - Fltr Pressure 1 9 - Fltr Pressure 2 10 - Fan 1 11 - Fan 2 12 - Onboard Sens 13 - Room Sens 14 - Hotspot Sens 15 - Ambient 1 Sens 16 - Ambient 2 Sens 17 - Dig 1 I/P 18 - Dig 2 I/P 19 - Dig 3 I/P 20 - Filter I/P 1 21 - Filter I/P 2 22 - Network 23 - Int storage 24 - SD Card
                     voltage 1.3.6.1.4.1.46651.1.1.33 integer read-only
System Voltage in DC.
                     digitalInputStatus 1.3.6.1.4.1.46651.1.1.34 integer read-only
Controller Alarm Drive Status. Binary Bit Position - Digital Input State: 0 - Inactive , 1 - Active 0 - DIG 1 I/P 1 - DIG 2 I/P 2 - DIG 3 I/P 3 - FILTER GUARD DIGI 1 I/P 4 - FILTER GUARD DIGI 2 I/P
                     alarmDriveStatus 1.3.6.1.4.1.46651.1.1.35 integer read-only
Controller Alarm Drive Status. Binary Bit Position - Alarm Drive State: 0 - Inactive , 1 - Active 0 - ALARM 1 1 - ALARM 2 2 - ALARM 3 3 - ALARM 4 4 - ALARM 5 5 - ALARM 6 6 - ALARM 7 7 - ALARM 8 8 - ALARM 9 9 - ALARM 10
                     fan1OpertdurHour 1.3.6.1.4.1.46651.1.1.36 integer read-write
Fan 1 operation duration - Hour
                     fan1OpertdurMin 1.3.6.1.4.1.46651.1.1.37 integer read-write
Fan 1 operation duration - Minute
                     fan2OpertdurHour 1.3.6.1.4.1.46651.1.1.38 integer read-write
Fan 2 operation duration - Hour
                     fan2OpertdurMin 1.3.6.1.4.1.46651.1.1.39 integer read-write
Fan 2 operation duration - Minute
                     aircon1OpertdurHour 1.3.6.1.4.1.46651.1.1.40 integer read-write
Airconditioner 1 operation duration - Hour
                     aircon1OpertdurMin 1.3.6.1.4.1.46651.1.1.41 integer read-write
Airconditioner 1 operation duration - Minute
                     aircon2OpertdurHour 1.3.6.1.4.1.46651.1.1.42 integer read-write
Airconditioner 2 operation duration - Hour
                     aircon2OpertdurMin 1.3.6.1.4.1.46651.1.1.43 integer read-write
Airconditioner 2 operation duration - Minute
                     heaterOpertdurHour 1.3.6.1.4.1.46651.1.1.44 integer read-write
Heater operation duration - Hour
                     heaterOpertdurMin 1.3.6.1.4.1.46651.1.1.45 integer read-write
Heater operation duration - Minute
                     ccSN 1.3.6.1.4.1.46651.1.1.46 octet string read-write
CC3000 Controller serial number
                     fanbox1SN 1.3.6.1.4.1.46651.1.1.47 octet string read-write
Free cooling FanBox unit 1 serial number
                     fanbox2SN 1.3.6.1.4.1.46651.1.1.48 octet string read-write
Free cooling FanBox unit 2 serial number
                     aircond1SN 1.3.6.1.4.1.46651.1.1.49 octet string read-write
Aicodnitioner unit 1 serial number
                     aircond2SN 1.3.6.1.4.1.46651.1.1.50 octet string read-write
Aicodnitioner unit 2 serial number
                     fwVersion 1.3.6.1.4.1.46651.1.1.51 octet string read-only
CC3000 Firmware version
                 highlevelControl 1.3.6.1.4.1.46651.1.2
                     coolSetpointZone1 1.3.6.1.4.1.46651.1.2.1 integer read-write
Cooling Setpoint Zone/Shelter 1
                     coolSetpointZone2 1.3.6.1.4.1.46651.1.2.2 integer read-write
Cooling Setpoint Zone/Shelter 2
                     heaterSetpoint 1.3.6.1.4.1.46651.1.2.3 integer read-write
Heater Setpoint
                     backupConfig 1.3.6.1.4.1.46651.1.2.4 integer read-write
Configuration Backup to Internal memory and SD card. 0 - No change, 1 - Backup
                     restoreConfig 1.3.6.1.4.1.46651.1.2.5 integer read-write
Configuration restore from Internal memory. 0 - No change, 1 - Restore
                     systemReset 1.3.6.1.4.1.46651.1.2.6 integer read-write
Colling System reset or restart. 0 - No change, 1 - Restart
                     year 1.3.6.1.4.1.46651.1.2.7 integer read-write
Calender - Year
                     month 1.3.6.1.4.1.46651.1.2.8 integer read-write
Calender - Month
                     date 1.3.6.1.4.1.46651.1.2.9 integer read-write
Calender - Date
                     hour 1.3.6.1.4.1.46651.1.2.10 integer read-write
Clock - Hour
                     minute 1.3.6.1.4.1.46651.1.2.11 integer read-write
Clock - Minute
                 fan1Config 1.3.6.1.4.1.46651.1.3
                     saveReloadConff1 1.3.6.1.4.1.46651.1.3.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     offTemprf1 1.3.6.1.4.1.46651.1.3.2 integer read-write
Fan OFF temperature
                     idleOnTemprf1 1.3.6.1.4.1.46651.1.3.3 integer read-write
Fan Idle Speed On temperature
                     idleEntryTemprf1 1.3.6.1.4.1.46651.1.3.4 integer read-write
Idle entry temperature
                     midPoint1Temprf1 1.3.6.1.4.1.46651.1.3.5 integer read-write
Mid point 1 entry temperature
                     setPointTemprf1 1.3.6.1.4.1.46651.1.3.6 integer read-write
Set Point temperature
                     midPoint2Temprf1 1.3.6.1.4.1.46651.1.3.7 integer read-write
Mid point 2 entry temperature
                     highSpeedTemprf1 1.3.6.1.4.1.46651.1.3.8 integer read-write
high Speed entry temperature
                     extendHighSpeedEntryTemprf1 1.3.6.1.4.1.46651.1.3.9 integer read-write
Extended high Speed entry temperature
                     extendHighSpeedExitTemprf1 1.3.6.1.4.1.46651.1.3.10 integer read-write
Extended high Speed exit temperature
                     boostEntryTemprf1 1.3.6.1.4.1.46651.1.3.11 integer read-write
Boost Speed entry temperature
                     boostExitTemprf1 1.3.6.1.4.1.46651.1.3.12 integer read-write
Boost Speed entry temperature
                     idleRPMf1 1.3.6.1.4.1.46651.1.3.13 integer read-write
Idle speed RPM
                     midPointRPMf1 1.3.6.1.4.1.46651.1.3.14 integer read-write
Midpoint Speed RPM
                     highSpeedRPMf1 1.3.6.1.4.1.46651.1.3.15 integer read-write
high Speed RPM
                     extendHighSpeedRPMf1 1.3.6.1.4.1.46651.1.3.16 integer read-write
Extended high Speed RPM
                     idleDutyCyclef1 1.3.6.1.4.1.46651.1.3.17 integer read-write
Idle Speed Duty Cycle
                     midDutyCyclef1 1.3.6.1.4.1.46651.1.3.18 integer read-write
Midpoint speed Duty Cycle
                     highSpeedDutyCyclef1 1.3.6.1.4.1.46651.1.3.19 integer read-write
high speed Duty Cycle
                     extendHighSpeedDutyCyclef1 1.3.6.1.4.1.46651.1.3.20 integer read-write
Extended high speed Duty Cycle
                     boostDutyCyclef1 1.3.6.1.4.1.46651.1.3.21 integer read-write
Boost speed Duty Cycle
                     deadBandRPMf1 1.3.6.1.4.1.46651.1.3.22 integer read-write
Dead band RPM
                     overrideDigi1f1 1.3.6.1.4.1.46651.1.3.23 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     overrideDigi2f1 1.3.6.1.4.1.46651.1.3.24 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     overrideDigi3f1 1.3.6.1.4.1.46651.1.3.25 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     overrideSensorfailf1 1.3.6.1.4.1.46651.1.3.26 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     sensorSelectf1 1.3.6.1.4.1.46651.1.3.27 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     tachoPulseperrotationf1 1.3.6.1.4.1.46651.1.3.28 integer read-write
Number of Tacho pulses per cycle rotation for given fan
                     closedLoopenablef1 1.3.6.1.4.1.46651.1.3.29 integer read-write
Closed Loop control enable or disable for given Fan. 0 - Enable. 1 - Disable
                     controlTypef1 1.3.6.1.4.1.46651.1.3.30 integer read-write
0 - 0-10V DC control. 1 - PWM control
                     enablef1 1.3.6.1.4.1.46651.1.3.31 integer read-write
0 - Disable Fan control. 1 - Enabel fan control
                 fan2Config 1.3.6.1.4.1.46651.1.4
                     saveReloadConff2 1.3.6.1.4.1.46651.1.4.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     offTemprf2 1.3.6.1.4.1.46651.1.4.2 integer read-write
Fan OFF temperature
                     idleOnTemprf2 1.3.6.1.4.1.46651.1.4.3 integer read-write
Fan Idle Speed On temperature
                     idleEntryTemprf2 1.3.6.1.4.1.46651.1.4.4 integer read-write
Idle entry temperature
                     midPoint1Temprf2 1.3.6.1.4.1.46651.1.4.5 integer read-write
Mid point 1 entry temperature
                     setPointTemprf2 1.3.6.1.4.1.46651.1.4.6 integer read-write
Set Point temperature
                     midPoint2Temprf2 1.3.6.1.4.1.46651.1.4.7 integer read-write
Mid point 2 entry temperature
                     highSpeedTemprf2 1.3.6.1.4.1.46651.1.4.8 integer read-write
high Speed entry temperature
                     extendHighSpeedEntryTemprf2 1.3.6.1.4.1.46651.1.4.9 integer read-write
Extended high Speed entry temperature
                     extendHighSpeedExitTemprf2 1.3.6.1.4.1.46651.1.4.10 integer read-write
Extended high Speed exit temperature
                     boostEntryTemprf2 1.3.6.1.4.1.46651.1.4.11 integer read-write
Boost Speed entry temperature
                     boostExitTemprf2 1.3.6.1.4.1.46651.1.4.12 integer read-write
Boost Speed entry temperature
                     idleRPMf2 1.3.6.1.4.1.46651.1.4.13 integer read-write
Idle speed RPM
                     midPointRPMf2 1.3.6.1.4.1.46651.1.4.14 integer read-write
Midpoint Speed RPM
                     highSpeedRPMf2 1.3.6.1.4.1.46651.1.4.15 integer read-write
high Speed RPM
                     extendHighSpeedRPMf2 1.3.6.1.4.1.46651.1.4.16 integer read-write
Extended high Speed RPM
                     idleDutyCyclef2 1.3.6.1.4.1.46651.1.4.17 integer read-write
Idle Speed Duty Cycle
                     midDutyCyclef2 1.3.6.1.4.1.46651.1.4.18 integer read-write
Midpoint speed Duty Cycle
                     highSpeedDutyCyclef2 1.3.6.1.4.1.46651.1.4.19 integer read-write
high speed Duty Cycle
                     extendHighSpeedDutyCyclef2 1.3.6.1.4.1.46651.1.4.20 integer read-write
Extended high speed Duty Cycle
                     boostDutyCyclef2 1.3.6.1.4.1.46651.1.4.21 integer read-write
Boost speed Duty Cycle
                     deadBandRPMf2 1.3.6.1.4.1.46651.1.4.22 integer read-write
Dead band RPM
                     overrideDigi1f2 1.3.6.1.4.1.46651.1.4.23 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     overrideDigi2f2 1.3.6.1.4.1.46651.1.4.24 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     overrideDigi3f2 1.3.6.1.4.1.46651.1.4.25 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     overrideSensorfailf2 1.3.6.1.4.1.46651.1.4.26 integer read-write
0-100 - Fan Speed in Duty cycle. 120 - No action on Over ride.
                     sensorSelectf2 1.3.6.1.4.1.46651.1.4.27 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     tachoPulseperrotationf2 1.3.6.1.4.1.46651.1.4.28 integer read-write
Number of Tacho pulses per cycle rotation for given fan
                     closedLoopenablef2 1.3.6.1.4.1.46651.1.4.29 integer read-write
Closed Loop control enable or disable for given Fan. 0 - Enable. 1 - Disable
                     controlTypef2 1.3.6.1.4.1.46651.1.4.30 integer read-write
0 - 0-10V DC control. 1 - PWM control
                     enablef2 1.3.6.1.4.1.46651.1.4.31 integer read-write
0 - Disable Fan control. 1 - Enabel fan control
                 damper1Config 1.3.6.1.4.1.46651.1.5
                     saveReloadConfd1 1.3.6.1.4.1.46651.1.5.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     lowercloseTemprd1 1.3.6.1.4.1.46651.1.5.2 integer read-write
Damper lower closing temperature
                     setPointd1 1.3.6.1.4.1.46651.1.5.3 integer read-write
Damper opening temperature
                     upperOpentempd1 1.3.6.1.4.1.46651.1.5.4 integer read-write
Damper upper opening temperature
                     upperClosetempd1 1.3.6.1.4.1.46651.1.5.5 integer read-write
Damper upper closing temperature
                     emgncyClosetempd1 1.3.6.1.4.1.46651.1.5.6 integer read-write
Damper emergency closing temperature
                     emgncyopentempd1 1.3.6.1.4.1.46651.1.5.7 integer read-write
Damper emergency open temperature
                     overrideDigi1d1 1.3.6.1.4.1.46651.1.5.8 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     overrideDigi2d1 1.3.6.1.4.1.46651.1.5.9 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     overrideDigi3d1 1.3.6.1.4.1.46651.1.5.10 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     overrideSensorFaild1 1.3.6.1.4.1.46651.1.5.11 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     sensSelectd1 1.3.6.1.4.1.46651.1.5.12 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     runDurationd1 1.3.6.1.4.1.46651.1.5.13 integer read-write
Damper Run time in minutes
                     enabled1 1.3.6.1.4.1.46651.1.5.14 integer read-write
0 - Disable. 1 - ONOFF. 2 - Dynamic
                 damper2Config 1.3.6.1.4.1.46651.1.6
                     saveReloadConfd2 1.3.6.1.4.1.46651.1.6.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     lowercloseTemprd2 1.3.6.1.4.1.46651.1.6.2 integer read-write
Damper lower closing temperature
                     setPointd2 1.3.6.1.4.1.46651.1.6.3 integer read-write
Damper opening temperature
                     upperOpentempd2 1.3.6.1.4.1.46651.1.6.4 integer read-write
Damper upper opening temperature
                     upperClosetempd2 1.3.6.1.4.1.46651.1.6.5 integer read-write
Damper upper closing temperature
                     emgncyClosetempd2 1.3.6.1.4.1.46651.1.6.6 integer read-write
Damper emergency closing temperature
                     emgncyopentempd2 1.3.6.1.4.1.46651.1.6.7 integer read-write
Damper emergency open temperature
                     overrideDigi1d2 1.3.6.1.4.1.46651.1.6.8 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     overrideDigi2d2 1.3.6.1.4.1.46651.1.6.9 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     overrideDigi3d2 1.3.6.1.4.1.46651.1.6.10 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     overrideSensorFaild2 1.3.6.1.4.1.46651.1.6.11 integer read-write
0 - Damper close. 1 - Damper open. 120 - No action on Over ride.
                     sensSelectd2 1.3.6.1.4.1.46651.1.6.12 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     runDurationd2 1.3.6.1.4.1.46651.1.6.13 integer read-write
Damper Run time in minutes
                     enabled2 1.3.6.1.4.1.46651.1.6.14 integer read-write
0 - Disable. 1 - ONOFF. 2 - Dynamic
                 aircon1Config 1.3.6.1.4.1.46651.1.7
                     saveReloadConfac1 1.3.6.1.4.1.46651.1.7.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     oNTemprac1 1.3.6.1.4.1.46651.1.7.2 integer read-write
Air Conditioner ON temperature
                     oFFTemprac1 1.3.6.1.4.1.46651.1.7.3 integer read-write
Air Conditioner OFF temperature
                     overrideDigi1ac1 1.3.6.1.4.1.46651.1.7.4 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride.
                     overrideDigi2ac1 1.3.6.1.4.1.46651.1.7.5 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride.
                     overrideDigi3ac1 1.3.6.1.4.1.46651.1.7.6 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride
                     overrideSensorFailac1 1.3.6.1.4.1.46651.1.7.7 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride
                     sensSelectac1 1.3.6.1.4.1.46651.1.7.8 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     minimumRunDurationac1 1.3.6.1.4.1.46651.1.7.9 integer read-write
Minimum AC Run time in seconds
                     restartTimeoutac1 1.3.6.1.4.1.46651.1.7.10 integer read-write
Restart timer in seconds
                     enableac1 1.3.6.1.4.1.46651.1.7.11 integer read-write
0 - Disable. 1 - Enable.
                 aircon2Config 1.3.6.1.4.1.46651.1.8
                     saveReloadConfac2 1.3.6.1.4.1.46651.1.8.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     onTemprac2 1.3.6.1.4.1.46651.1.8.2 integer read-write
Air Conditioner ON temperature
                     offTemprac2 1.3.6.1.4.1.46651.1.8.3 integer read-write
Air Conditioner OFF temperature
                     overrideDigi1ac2 1.3.6.1.4.1.46651.1.8.4 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride.
                     overrideDigi2ac2 1.3.6.1.4.1.46651.1.8.5 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride.
                     overrideDigi3ac2 1.3.6.1.4.1.46651.1.8.6 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride
                     overrideSensorFailac2 1.3.6.1.4.1.46651.1.8.7 integer read-write
0 - AC OFF. 1 - AC ON. 120 - No action on Over ride
                     sensSelectac2 1.3.6.1.4.1.46651.1.8.8 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     minimumRunDurationac2 1.3.6.1.4.1.46651.1.8.9 integer read-write
Minimum AC Run time in seconds
                     restartTimeoutac2 1.3.6.1.4.1.46651.1.8.10 integer read-write
Restart timer in seconds
                     enableac2 1.3.6.1.4.1.46651.1.8.11 integer read-write
0 - Disable. 1 - Enable.
                 heaterConfig 1.3.6.1.4.1.46651.1.9
                     saveReloadConfhtr 1.3.6.1.4.1.46651.1.9.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                     onTemprhtr 1.3.6.1.4.1.46651.1.9.2 integer read-write
Heater ON temperature
                     offTemprhtr 1.3.6.1.4.1.46651.1.9.3 integer read-write
Heater OFF temperature
                     overrideDigi1htr 1.3.6.1.4.1.46651.1.9.4 integer read-write
0 - Heat OFF. 1 - Heat ON. 120 - No action on Over ride.
                     overrideDigi2htr 1.3.6.1.4.1.46651.1.9.5 integer read-write
0 - Heat OFF. 1 - Heat ON. 120 - No action on Over ride.
                     overrideDigi3htr 1.3.6.1.4.1.46651.1.9.6 integer read-write
0 - Heat OFF. 1 - Heat ON. 120 - No action on Over ride
                     overrideSensorFailhtr 1.3.6.1.4.1.46651.1.9.7 integer read-write
0 - Heat OFF. 1 - Heat ON. 120 - No action on Over ride
                     sensSelecthtr 1.3.6.1.4.1.46651.1.9.8 integer read-write
0 - Onboard sensor. 1 - Room Sensor. 2 - Hotspot sensor. 3 - Ambient 2 sensor. 4 - Ambient 1 sensor. 5 - Shelter temperature
                     enablehtr 1.3.6.1.4.1.46651.1.9.9 integer read-write
0 - Disable. 1 - Enable.
                 humidityConfig 1.3.6.1.4.1.46651.1.10
                       saveReloadConfhum 1.3.6.1.4.1.46651.1.10.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                       rhEntryhum 1.3.6.1.4.1.46651.1.10.2 integer read-write
Humidity function entry value
                       rhExithum 1.3.6.1.4.1.46651.1.10.3 integer read-write
Humidity function exit value
                       coolingmodehum 1.3.6.1.4.1.46651.1.10.4 integer read-write
0 - Freecooling. 1 - Standard. 2 - Power save. 3 - Aircon.
                       temprsetpoffsethum 1.3.6.1.4.1.46651.1.10.5 integer read-write
Cooling setpoint offset
                       rhSensPositionhum 1.3.6.1.4.1.46651.1.10.6 integer read-write
0 - Indoor. 1 - Outdoor
                       enablehum 1.3.6.1.4.1.46651.1.10.7 integer read-write
0 - Disable. 1 - Enable.
                 systemConfig 1.3.6.1.4.1.46651.1.11
                       saveReloadConfsysc 1.3.6.1.4.1.46651.1.11.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                       vdcLowEntrysys 1.3.6.1.4.1.46651.1.11.2 integer read-write
Low voltage shut down entry
                       vdcLowExitsys 1.3.6.1.4.1.46651.1.11.3 integer read-write
Low voltage shut down exit
                       vdcHighEntrysys 1.3.6.1.4.1.46651.1.11.4 integer read-write
High voltage shut down entry
                       vdcHighExitsys 1.3.6.1.4.1.46651.1.11.5 integer read-write
High voltage shut down exit
                       temprLowlimitsys 1.3.6.1.4.1.46651.1.11.6 integer read-write
Low temperature alarm limit
                       temprHighlimit1sys 1.3.6.1.4.1.46651.1.11.7 integer read-write
High temperature alarm limit 1
                       temprHighlimit2sys 1.3.6.1.4.1.46651.1.11.8 integer read-write
High temperature alarm limit 2
                       temprHighlimit3sys 1.3.6.1.4.1.46651.1.11.9 integer read-write
High temperature alarm limit 3
                       temprlimithyssys 1.3.6.1.4.1.46651.1.11.10 integer read-write
Temperature alarm limit hysteresis
                       rhLowlimitsys 1.3.6.1.4.1.46651.1.11.11 integer read-write
Humidity alarm low limit %RH
                       rhHighlimitsys 1.3.6.1.4.1.46651.1.11.12 integer read-write
Humidity alarm High limit %RH
                       flowpresslimit1sys 1.3.6.1.4.1.46651.1.11.13 integer read-write
Flow pressure limit 1 Pa
                       flowpresslimit2sys 1.3.6.1.4.1.46651.1.11.14 integer read-write
Flow pressure limit 2 Pa
                       flowpresshyssys 1.3.6.1.4.1.46651.1.11.15 integer read-write
Flow pressure limit hysteresis Pa
                       coolingzonessys 1.3.6.1.4.1.46651.1.11.16 integer read-write
1 - One cooling zone, 2 - Two cooling zones
                       coolingModesys 1.3.6.1.4.1.46651.1.11.17 integer read-write
0 - FC, 1 - Std, 2 - Ps, 3 - Acon
                       negCoolingDeltaOverridesys 1.3.6.1.4.1.46651.1.11.18 integer read-write
0 - Disable, 1 - Enable
                       negCoolingDeltaHyssys 1.3.6.1.4.1.46651.1.11.19 integer read-write
Negative cooling delta hysteresis
                       coolingDeltatempsys 1.3.6.1.4.1.46651.1.11.20 integer read-write
Cooling delta temperature
                       shelterTemprsys 1.3.6.1.4.1.46651.1.11.21 integer read-write
0 - RA, 1 - HS, 2 - Both
                       acleadlagsys 1.3.6.1.4.1.46651.1.11.22 integer read-write
0 - Disable, 1 - Enable
                       coolingModeXzonesys 1.3.6.1.4.1.46651.1.11.23 integer read-write
0 - FC, 1 - Std, 2 - Ps, 3 - Acon
                       negCoolingDeltaOverrideXzonesys 1.3.6.1.4.1.46651.1.11.24 integer read-write
0 - Disable, 1 - Enable
                       negCoolingDeltaHysXzonesys 1.3.6.1.4.1.46651.1.11.25 integer read-write
Negative cooling delta hysteresis
                       coolingDeltatempXzonesys 1.3.6.1.4.1.46651.1.11.26 integer read-write
Cooling delta temperature
                       fan1Zonesys 1.3.6.1.4.1.46651.1.11.27 integer read-write
1 - Fan 1 for Zone 1, 2 - Fan 1 for zone 2
                       fan2Zonesys 1.3.6.1.4.1.46651.1.11.28 integer read-write
1 - Fan 2 for Zone 1, 2 - Fan 2 for zone 2
                       ac1Zonesys 1.3.6.1.4.1.46651.1.11.29 integer read-write
1 - AC 1 for Zone 1, 2 - AC 1 for zone 2
                       ac2Zonesys 1.3.6.1.4.1.46651.1.11.30 integer read-write
1 - AC 2 for Zone 1, 2 - AC 2 for zone 2
                       damper1Zonesys 1.3.6.1.4.1.46651.1.11.31 integer read-write
1 - Damper 1 for Zone 1, 2 - Damper 1 for zone 2
                       damper2Zonesys 1.3.6.1.4.1.46651.1.11.32 integer read-write
1 - Damper 2 for Zone 1, 2 - Damper 2 for zone 2
                       heaterZonesys 1.3.6.1.4.1.46651.1.11.33 integer read-write
1 - Heater for Zone 1, 2 - Heater for zone 2
                       statusLogsys 1.3.6.1.4.1.46651.1.11.34 integer read-write
0 - Disable, 1 - Enable
                       logintervalsys 1.3.6.1.4.1.46651.1.11.35 integer read-write
Log interval in minutes
                       alarm1NONCsys 1.3.6.1.4.1.46651.1.11.36 integer read-write
0 - NO, 1 - NC
                       alarm2NONCsys 1.3.6.1.4.1.46651.1.11.37 integer read-write
0 - NO, 1 - NC
                       alarm3NONCsys 1.3.6.1.4.1.46651.1.11.38 integer read-write
0 - NO, 1 - NC
                       alarm4NONCsys 1.3.6.1.4.1.46651.1.11.39 integer read-write
0 - NO, 1 - NC
                       alarm5NONCsys 1.3.6.1.4.1.46651.1.11.40 integer read-write
0 - NO, 1 - NC
                       alarm6NONCsys 1.3.6.1.4.1.46651.1.11.41 integer read-write
0 - NO, 1 - NC
                       alarm7NONCsys 1.3.6.1.4.1.46651.1.11.42 integer read-write
0 - NO, 1 - NC
                       alarm8NONCsys 1.3.6.1.4.1.46651.1.11.43 integer read-write
0 - NO, 1 - NC
                       alarm9NONCsys 1.3.6.1.4.1.46651.1.11.44 integer read-write
0 - NO, 1 - NC
                       alarm10NONCsys 1.3.6.1.4.1.46651.1.11.45 integer read-write
0 - NO, 1 - NC
                       alarm1Delaysys 1.3.6.1.4.1.46651.1.11.46 integer read-write
Alarm output delay in seconds
                       alarm2Delaysys 1.3.6.1.4.1.46651.1.11.47 integer read-write
Alarm output delay in seconds
                       alarm3Delaysys 1.3.6.1.4.1.46651.1.11.48 integer read-write
Alarm output delay in seconds
                       alarm4Delaysys 1.3.6.1.4.1.46651.1.11.49 integer read-write
Alarm output delay in seconds
                       alarm5Delaysys 1.3.6.1.4.1.46651.1.11.50 integer read-write
Alarm output delay in seconds
                       alarm6Delaysys 1.3.6.1.4.1.46651.1.11.51 integer read-write
Alarm output delay in seconds
                       alarm7Delaysys 1.3.6.1.4.1.46651.1.11.52 integer read-write
Alarm output delay in seconds
                       alarm8Delaysys 1.3.6.1.4.1.46651.1.11.53 integer read-write
Alarm output delay in seconds
                       alarm9Delaysys 1.3.6.1.4.1.46651.1.11.54 integer read-write
Alarm output delay in seconds
                       alarm10Delaysys 1.3.6.1.4.1.46651.1.11.55 integer read-write
Alarm output delay in seconds
                       ac1NONCsys 1.3.6.1.4.1.46651.1.11.56 integer read-write
0 - NO, 1 - NC
                       ac2NONCsys 1.3.6.1.4.1.46651.1.11.57 integer read-write
0 - NO, 1 - NC
                       dig1NONCsys 1.3.6.1.4.1.46651.1.11.58 integer read-write
0 - NO, 1 - NC
                       dig2NONCsys 1.3.6.1.4.1.46651.1.11.59 integer read-write
0 - NO, 1 - NC
                       dig3NONCsys 1.3.6.1.4.1.46651.1.11.60 integer read-write
0 - NO, 1 - NC
                       dig2funcoverridesys 1.3.6.1.4.1.46651.1.11.61 integer read-write
0 - Override, 1 - setpoint offset, 2 - mode X
                       dig3funcoverridesys 1.3.6.1.4.1.46651.1.11.62 integer read-write
0 - Override, 1 - setpoint offset, 2 - mode X
                       dig2offsetsys 1.3.6.1.4.1.46651.1.11.63 integer read-write
Cooling setpoint offset
                       dig3offsetsys 1.3.6.1.4.1.46651.1.11.64 integer read-write
Cooling setpoint offset
                       dig2trigModesys 1.3.6.1.4.1.46651.1.11.65 integer read-write
0 - FC, 1 - Std, 2 - Ps, 3 - Acon
                       dig3TrigModesys 1.3.6.1.4.1.46651.1.11.66 integer read-write
0 - FC, 1 - Std, 2 - Ps, 3 - Acon
                       filterGuard1NONCsys 1.3.6.1.4.1.46651.1.11.67 integer read-write
0 - NO, 1 - NC
                       filterGuard2NONCsys 1.3.6.1.4.1.46651.1.11.68 integer read-write
0 - NO, 1 - NC
                       temprUnitsCFsys 1.3.6.1.4.1.46651.1.11.69 integer read-write
0 - Celcius, 1 - Fahrenheit
                       languageEnglishsys 1.3.6.1.4.1.46651.1.11.70 integer read-write
0 - Disable, 1 - Enable
                 alarmConfig 1.3.6.1.4.1.46651.1.12
                       saveReloadConfAlm 1.3.6.1.4.1.46651.1.12.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Alarm Mapping reloaded
                       alarm1mask 1.3.6.1.4.1.46651.1.12.2 integer read-write
Alarm drive 1 Mask [Can have multiple Alarm Errors]. Bit Position - Value - Alarm Drive State: 0 - Unselect, 1 - Select 1 - 1 - Voltage Low 2 - 2 - Voltage High 3 - 4 - Tempr Low 4 - 8 - Tempr Limit 1 5 - 16 - Tempr Limit 2 6 - 32 - Tempr Limit 3 7 - 64 - Humid. Low 8 - 128 - Humid. High 9 - 256 - Fltr Pressure 1 10 - 512 - Fltr Pressure 2 11 - 1024 - Fan 1 12 - 2048 - Fan 2 13 - 4096 - Onboard Sens 14 - 8192 - Room Sens 15 - 16384 - Hotspot Sens 16 - 32768 - Ambient 1 Sens 17 - 65536 - Ambient 2 Sens 18 - 131072 - Dig 1 I/P 19 - 262144 - Dig 2 I/P 20 - 524288 - Dig 3 I/P 21 - 1048576 - Filter I/P 1 22 - 2097152 - Filter I/P 2 23 - 4194304 - Network 24 - 8388608 - Int storage 25 - 16777216 - SD Card
                       alarm2mask 1.3.6.1.4.1.46651.1.12.3 integer read-write
Alarm drive 2 Mask [Can have multiple Alarm Errors]. Bit Position - Value - Alarm Drive State: 0 - Unselect, 1 - Select 1 - 1 - Voltage Low 2 - 2 - Voltage High 3 - 4 - Tempr Low 4 - 8 - Tempr Limit 1 5 - 16 - Tempr Limit 2 6 - 32 - Tempr Limit 3 7 - 64 - Humid. Low 8 - 128 - Humid. High 9 - 256 - Fltr Pressure 1 10 - 512 - Fltr Pressure 2 11 - 1024 - Fan 1 12 - 2048 - Fan 2 13 - 4096 - Onboard Sens 14 - 8192 - Room Sens 15 - 16384 - Hotspot Sens 16 - 32768 - Ambient 1 Sens 17 - 65536 - Ambient 2 Sens 18 - 131072 - Dig 1 I/P 19 - 262144 - Dig 2 I/P 20 - 524288 - Dig 3 I/P 21 - 1048576 - Filter I/P 1 22 - 2097152 - Filter I/P 2 23 - 4194304 - Network 24 - 8388608 - Int storage 25 - 16777216 - SD Card
                       alarm3mask 1.3.6.1.4.1.46651.1.12.4 integer read-write
Alarm drive 3 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm4mask 1.3.6.1.4.1.46651.1.12.5 integer read-write
Alarm drive 4 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm5mask 1.3.6.1.4.1.46651.1.12.6 integer read-write
Alarm drive 5 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm6mask 1.3.6.1.4.1.46651.1.12.7 integer read-write
Alarm drive 6 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm7mask 1.3.6.1.4.1.46651.1.12.8 integer read-write
Alarm drive 7 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm8mask 1.3.6.1.4.1.46651.1.12.9 integer read-write
Alarm drive 8 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm9mask 1.3.6.1.4.1.46651.1.12.10 integer read-write
Alarm drive 9 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                       alarm10mask 1.3.6.1.4.1.46651.1.12.11 integer read-write
Alarm drive 10 Select [Single Alarm Error]. Bit Position - Alarm Drive State: 0 - Unselect, 1-25 - Select 1 - Voltage Low 2 - Voltage High 3 - Tempr Low 4 - Tempr Limit 1 5 - Tempr Limit 2 6 - Tempr Limit 3 7 - Humid. Low 8 - Humid. High 9 - Fltr Pressure 1 10 - Fltr Pressure 2 11 - Fan 1 12 - Fan 2 13 - Onboard Sens 14 - Room Sens 15 - Hotspot Sens 16 - Ambient 1 Sens 17 - Ambient 2 Sens 18 - Dig 1 I/P 19 - Dig 2 I/P 20 - Dig 3 I/P 21 - Filter I/P 1 22 - Filter I/P 2 23 - Network 24 - Int storage 25 - SD Card
                 nightModeConfig 1.3.6.1.4.1.46651.1.13
                       saveReloadConfNm 1.3.6.1.4.1.46651.1.13.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                       starttimeHournm 1.3.6.1.4.1.46651.1.13.2 integer read-write
Night Mode Start time hour
                       startTimeMinutesnm 1.3.6.1.4.1.46651.1.13.3 integer read-write
Night Mode Start time minutes
                       endTimeHournm 1.3.6.1.4.1.46651.1.13.4 integer read-write
Night Mode End time hour
                       endTimeMinutesnm 1.3.6.1.4.1.46651.1.13.5 integer read-write
Night Mode End time minutes
                       fanMaxRPMnm 1.3.6.1.4.1.46651.1.13.6 integer read-write
% of max fan speed
                       setPointOffsetnm 1.3.6.1.4.1.46651.1.13.7 integer read-write
Cooling setpoint offset
                       coolingModenm 1.3.6.1.4.1.46651.1.13.8 integer read-write
0 - Freecooling. 1 - Standard. 2 - Power save. 3 - Aircon.
                       enablenm 1.3.6.1.4.1.46651.1.13.9 integer read-write
0 - Disable. 1 - Enable.
                 networkConfig 1.3.6.1.4.1.46651.1.14
                       saveReloadConfNW 1.3.6.1.4.1.46651.1.14.1 integer read-write
0 - Discard modifications, 1 - Save Modifications. Configuration reloaded
                       dhcpenable 1.3.6.1.4.1.46651.1.14.2 integer read-write
0 - Static IP, 1 - Dynamic IP
                       ipaddr 1.3.6.1.4.1.46651.1.14.3 octet string read-write
System IP Address
                       subnetmask 1.3.6.1.4.1.46651.1.14.4 octet string read-write
Sub-net Mask
                       gatewayIPaddr 1.3.6.1.4.1.46651.1.14.5 octet string read-write
Default Gateway IP Address
                       ntpIPaddr 1.3.6.1.4.1.46651.1.14.6 octet string read-write
DNS IP Address
                       snmpPort 1.3.6.1.4.1.46651.1.14.7 integer read-write
SNMP Agent Port
                       trapServer1IPaddr 1.3.6.1.4.1.46651.1.14.8 octet string read-write
SNMP TRAP manager 1 IP address
                       trapServer1port 1.3.6.1.4.1.46651.1.14.9 integer read-write
SNMP TRAP manager 1 Port Number
                       trapServer2IPaddr 1.3.6.1.4.1.46651.1.14.10 octet string read-write
SNMP TRAP manager 2 IP address
                       trapServer2port 1.3.6.1.4.1.46651.1.14.11 integer read-write
SNMP TRAP manager 2 Port Number
                       trapServer3IPaddr 1.3.6.1.4.1.46651.1.14.12 octet string read-write
SNMP TRAP manager 3 IP address
                       trapServer3port 1.3.6.1.4.1.46651.1.14.13 integer read-write
SNMP TRAP manager 3 Port Number
                       snmpCommunity 1.3.6.1.4.1.46651.1.14.14 octet string read-write
SNMP Read/write Community string
                       hostName 1.3.6.1.4.1.46651.1.14.15 octet string read-write
System Netwrok Host name
                 trapError 1.3.6.1.4.1.46651.1.15
                       errorNumber 1.3.6.1.4.1.46651.1.15.1 integer no-access
Error Number corresponding to CC3000 controller Error. Enumeration: 'Network': 23, 'RoomSens': 14, 'FltPressure2': 10, 'Dig3IP': 20, 'Intstorage': 24, 'TemprLimit1': 4, 'TemprLimit2': 5, 'TemprLimit3': 6, 'HumidLow': 7, 'OnboardSens': 13, 'FilterIP2': 22, 'FilterIP1': 21, 'SDCard': 25, 'FltrPressure1': 9, 'HotspotSens': 15, 'Dig1IP': 18, 'Fan1': 11, 'Fan2': 12, 'VoltageHigh': 2, 'VoltageLow': 1, 'TemprLow': 3, 'Ambient1Sens': 16, 'Dig2IP': 19, 'HumidHigh': 8, 'Ambient2Sens': 17.
                       status 1.3.6.1.4.1.46651.1.15.2 integer no-access
Error Status Active/SET or Inactive/CLEAR. Enumeration: 'ALARMset': 1, 'ALARMclear': 0.
                       value 1.3.6.1.4.1.46651.1.15.3 octet string no-access
Value Corresponding to Error Occurance Instance.
                       info 1.3.6.1.4.1.46651.1.15.4 octet string no-access
Description of Current Error.
               cc3000Trap 1.3.6.1.4.1.466510.1
Trap From CC300 Controller. Contains TRAP information