CXACTE-MIB: View SNMP OID List / Download MIB

VENDOR: MEMOTEC COMMUNICATIONS


 Home MIB: CXACTE-MIB
Download as:   
SNMPv2-CONF, CXProduct-SMI, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 acteDebugTable 1.3.6.1.4.1.495.2.1.8.1.30 no-access
The DS1 debug table.
       acteDebugEntry 1.3.6.1.4.1.495.2.1.8.1.30.1 no-access
An entry in the DS1 Debug Table.
           acteDebugLinkIndex 1.3.6.1.4.1.495.2.1.8.1.30.1.1 integer read-only
Identifies the T1/E1 (DS1) interface port.
           acteDebugIndex 1.3.6.1.4.1.495.2.1.8.1.30.1.2 integer read-only
The index value uniquely identifies the T1/E1 (DS0) channel for which these table entries are applicable.
           acteDebugRegister 1.3.6.1.4.1.495.2.1.8.1.30.1.10 displaystring read-write
Determines which register on the T1/E1 I/O card will be affected by the 'read' or 'write' operation initiated by the acteDebugOperation object.
           acteDebugResult 1.3.6.1.4.1.495.2.1.8.1.30.1.50 displaystring read-only
Indicates the values of each of the 8 registers following the address specified for the acteDebugRegister object following a 'get' command.
           acteDebugWrite 1.3.6.1.4.1.495.2.1.8.1.30.1.80 displaystring read-write
Determines the value to be written to the T1/E1 I/O card register specified by the acteDebugRegister object. The command is activated by entering a value in this object.
           acteDebugTvdStat 1.3.6.1.4.1.495.2.1.8.1.30.1.81 integer read-write
This object displays the statistics relative to this TVD control block for the specified DS0 channel on the specified DVC card which corresponds to acteDebugCfgIndex. If acteDebugTvdStat is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
           acteDebugDs1Stat 1.3.6.1.4.1.495.2.1.8.1.30.1.82 integer read-write
This object displays the statistics relative to this DS1 control block. When acteDebugIndex is set to 1, it displays the port information, 2 displays the counter information for channels 0 to 14 and 3 displays the counter information for channels 15 to 29. If acteDebugDs1Stat is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
           acteDebugSvdStat 1.3.6.1.4.1.495.2.1.8.1.30.1.83 integer read-write
This object displays the statistics relative to this SVD control block for the specified DS0 channel specified by acteDebugIndex. If acteDebugSvdStat is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.
           acteDebugSvdEvt 1.3.6.1.4.1.495.2.1.8.1.30.1.84 integer read-write
This object displays the timestamps concerning particular events relative to this TVD control block for the specified DS0 channel specified by acteDebugIndex. If acteDebugSvdEvt is set to 1, nothing occurs, 2 displays the debugging information and 3 clears the counters.