CTRON-BRDG-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-BRDG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cabletron 1.3.6.1.4.1.52
       mibs 1.3.6.1.4.1.52.4
           ctron 1.3.6.1.4.1.52.4.1
               ctdatalink 1.3.6.1.4.1.52.4.1.2
                   ctBridge 1.3.6.1.4.1.52.4.1.2.3
                       ctBridgeSr 1.3.6.1.4.1.52.4.1.2.3.3
                           ctBridgeSrPortPairTable 1.3.6.1.4.1.52.4.1.2.3.3.1 no-access
A table containing information of source and destination port pairs for source routing
                               ctBridgeSrPortPairEntry 1.3.6.1.4.1.52.4.1.2.3.3.1.1 no-access
An entry consisting of objects specifying information for the source and destination port pairs used for source routing.
                                   ctBridgeSrPortPairSrcPort 1.3.6.1.4.1.52.4.1.2.3.3.1.1.1 integer read-only
The source port (ie the port which received the packets) for which this entry has source routing information.
                                   ctBridgeSrPortPairDestPort 1.3.6.1.4.1.52.4.1.2.3.3.1.1.2 integer read-only
The destination port (ie the port which transmitted the packets) for which this entry has source routing information.
                                   ctBridgeSrPortPairPackets 1.3.6.1.4.1.52.4.1.2.3.3.1.1.3 counter read-only
The number of packets forward by the source route bridge from the SrcPort to the DestPort.
                                   ctBridgeSrPortPairState 1.3.6.1.4.1.52.4.1.2.3.3.1.1.4 integer read-write
The state of source route bridging on this port pair. This is the desired state of the administrator. The operational state of the port pair is determined by this state along with the states of dot1dStpPortState within the IETF Bridge MIB and ifOperStatus of the IETF MIB II for each port. Enumeration: 'disabled': 2, 'enabled': 1.
                       ctBridgeTp 1.3.6.1.4.1.52.4.1.2.3.4
                           ctBridgeTpPortFwdTable 1.3.6.1.4.1.52.4.1.2.3.4.1 no-access
A table containing information of source and destination port transparent MAC layer forwarding.
                               ctBridgeTpPortFwdEntry 1.3.6.1.4.1.52.4.1.2.3.4.1.1 no-access
An entry consisting of objects specifying the source and destination port transparent MAC layer forwarding information.
                                   ctBridgeTpPortFwdSrcPort 1.3.6.1.4.1.52.4.1.2.3.4.1.1.1 integer read-only
The source port (ie the port which received the packets) for which this entry has transparent bridge forwarding information.
                                   ctBridgeTpPortFwdDestPort 1.3.6.1.4.1.52.4.1.2.3.4.1.1.2 integer read-only
The destination port (ie the port which the packets were transmitted out) for which this entry has transparent bridge forwarding information.
                                   ctBridgeTpPortFwdPackets 1.3.6.1.4.1.52.4.1.2.3.4.1.1.3 counter read-only
The number of packets transparently forwarded by the bridge from the SrcPort to the DestPort.
                           ctBridgeTpPortStateTable 1.3.6.1.4.1.52.4.1.2.3.4.2 no-access
A table which allows the network administrator to enable/ disable transparent bridging on a particular port.
                               ctBridgeTpPortStateEntry 1.3.6.1.4.1.52.4.1.2.3.4.2.1 no-access
An entry containing the transparent bridge state of a particular port.
                                   ctBridgeTpPortStatePort 1.3.6.1.4.1.52.4.1.2.3.4.2.1.1 integer read-only
The port for which this entry has transparent bridge state information.
                                   ctBridgeTpPortState 1.3.6.1.4.1.52.4.1.2.3.4.2.1.2 integer read-write
The state of transparent bridging on this port. This is the desired state of the administrator. The operational state of the port is determined by this state along with the state of dot1dStpPortState within the IETF Bridge MIB and ifOperStatus of the IETF MIB II. Enumeration: 'disabled': 2, 'enabled': 1.
                       ctBridgeSdbEnet 1.3.6.1.4.1.52.4.1.2.3.5
                           ctBridgeSdbEnetTotFtrs 1.3.6.1.4.1.52.4.1.2.3.5.1 integer read-only
The total number of Ethernet filters in the special database.
                           ctBridgeSdbEnetNoMatch 1.3.6.1.4.1.52.4.1.2.3.5.2 integer read-write
The process to be performed if no match is found in the Ethernet special database. The process of filtering or forwarding is for all ports. searchFDB results in searching the IEEE 802.1D transparent filter database referenced by the IETF Bridge MIB. Enumeration: 'filter': 1, 'forward': 2, 'searchFDB': 3.
                           ctBridgeSdbEnetTable 1.3.6.1.4.1.52.4.1.2.3.5.3 no-access
A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (destination address, source address, type/length field as well as a window of 64 bytes of packet data beginning at a data offset) to be used for filtering decisions. The filters are to be searched in the order of incrementing filter number.
                               ctBridgeSdbEnetEntry 1.3.6.1.4.1.52.4.1.2.3.5.3.1 no-access
Filtering information which extends the filtering capability of IEEE 802.1d.
                                   ctBridgeSdbEnetFtrNo 1.3.6.1.4.1.52.4.1.2.3.5.3.1.1 integer read-only
The Filter number for which this entry contains filtering information.
                                   ctBridgeSdbEnetState 1.3.6.1.4.1.52.4.1.2.3.5.3.1.2 integer read-write
The state of the filter for which this entry contains filtering information. Enumeration: 'disabled': 2, 'enabled': 1.
                                   ctBridgeSdbEnetFtrData 1.3.6.1.4.1.52.4.1.2.3.5.3.1.3 octet string read-write
The specific packet string representing the destination address, source address, type/length field and a window of 64 bytes of packet data beginning at DataOffset to be used for filtering decisions. Each ASCII character of the string represents a nibble of packet data, therefore the packet string should be (14+64) * 2 = 156 characters long. A value of 'x' in the packet string is used to indicate a 'Don't care' and no filtering is to be performed on that nibble.
                                   ctBridgeSdbEnetDataOffset 1.3.6.1.4.1.52.4.1.2.3.5.3.1.4 integer read-write
The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the first byte after the Ethernet MAC header. The largest value of DataOffset is 1514 - 14 - 63 = 1437.
                           ctBridgeSdbEnetIOTable 1.3.6.1.4.1.52.4.1.2.3.5.4 no-access
A table containing the set of ports to which frames received from specific ports and containing the specific packet string (destination address, source address, type/length field as well as a window of 64 bytes of packet data beginning at a data offset) of the corresponding filter number of SdbEnetTable are allowed to be forwarded. The value of '0' in this table as the RcvPort is used to specify all ports which are not already specified in this table for a particular entry.
                               ctBridgeSdbEnetIOEntry 1.3.6.1.4.1.52.4.1.2.3.5.4.1 no-access
The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbEnetTable are allowed to be forwarded.
                                   ctBridgeSdbEnetIOFtrNo 1.3.6.1.4.1.52.4.1.2.3.5.4.1.1 integer read-write
The Filter number for which this entry contains filtering information.
                                   ctBridgeSdbEnetIORcvPort 1.3.6.1.4.1.52.4.1.2.3.5.4.1.2 integer read-write
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '0' indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
                                   ctBridgeSdbEnetIOAllowedToGoTo 1.3.6.1.4.1.52.4.1.2.3.5.4.1.3 integer read-write
The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)
                                   ctBridgeSdbEnetIODelEntry 1.3.6.1.4.1.52.4.1.2.3.5.4.1.4 integer read-write
Writing a '1' to this object deletes this entry from the Ethernet special database. This object will always return a '1' when read. Enumeration: 'deleteEntry': 1.
                       ctBridgeSdbTr 1.3.6.1.4.1.52.4.1.2.3.6
                           ctBridgeSdbTrTotFtrs 1.3.6.1.4.1.52.4.1.2.3.6.1 integer read-only
The total number of Token Ring filters in the special database.
                           ctBridgeSdbTrNoMatch 1.3.6.1.4.1.52.4.1.2.3.6.2 integer read-write
The process to be performed if no match is found in the Token Ring special database. The process of filtering or forwarding is for all ports. searchFDB results in searching the IEEE 802.1D transparent filter database referenced by the IETF Bridge MIB. Enumeration: 'filter': 1, 'forward': 2, 'searchFDB': 3.
                           ctBridgeSdbTrTable 1.3.6.1.4.1.52.4.1.2.3.6.3 no-access
A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (AC, FC, destination address, source address, as well as a window of 64 bytes of packet data beginning at a data offset) to be used for filtering decisions. The filters are to be searched in the order of incrementing filter number.
                               ctBridgeSdbTrEntry 1.3.6.1.4.1.52.4.1.2.3.6.3.1 no-access
Filtering information which extends the filtering capability of IEEE 802.1d.
                                   ctBridgeSdbTrFtrNo 1.3.6.1.4.1.52.4.1.2.3.6.3.1.1 integer read-only
The Filter number for which this entry contains filtering information.
                                   ctBridgeSdbTrState 1.3.6.1.4.1.52.4.1.2.3.6.3.1.2 integer read-write
The state of the filter for which this entry contains filtering information. Enumeration: 'disabled': 2, 'enabled': 1.
                                   ctBridgeSdbTrFtrData 1.3.6.1.4.1.52.4.1.2.3.6.3.1.3 octet string read-write
The specific packet string consisting of the AC, FC, destination address, source address, and a window of 64 bytes of packet data beginning at DataOffset to be used for filtering decisions. Each ASCII character of the string represents a nibble of packet data, therefore the packet string should be (14+64) * 2 = 156 characters long. A value of 'x' in the packet string is used to indicate a 'Don't care' and no filtering is to be performed on that nibble.
                                   ctBridgeSdbTrDataOffset 1.3.6.1.4.1.52.4.1.2.3.6.3.1.4 integer read-write
The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the first byte after the Token Ring MAC header. The largest value of DataOffset is 17800 - 14 - 63 = 17723.
                           ctBridgeSdbTrIOTable 1.3.6.1.4.1.52.4.1.2.3.6.4 no-access
A table containing the set of ports to which frames received from specific ports and containing the specific packet string (AC, FC, destination address, source address, as well as a window of 64 bytes of packet data beginning at a data offset) of the corresponding filter number of SdbTrTable are allowed to be forwarded. The value of '0' in this table as the RcvPort is used to specify all ports which are not already specified in this table for a particular entry.
                               ctBridgeSdbTrIOEntry 1.3.6.1.4.1.52.4.1.2.3.6.4.1 no-access
The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbTrTable are allowed to be forwarded.
                                   ctBridgeSdbTrIOFtrNo 1.3.6.1.4.1.52.4.1.2.3.6.4.1.1 integer read-write
The Filter number for which this entry contains filtering information.
                                   ctBridgeSdbTrIORcvPort 1.3.6.1.4.1.52.4.1.2.3.6.4.1.2 integer read-write
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '0' indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
                                   ctBridgeSdbTrIOAllowedToGoTo 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3 integer read-write
The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)
                                   ctBridgeSdbTrIODelEntry 1.3.6.1.4.1.52.4.1.2.3.6.4.1.4 integer read-write
Writing a '1' to this object deletes this entry from the Token Ring special database. This object will always return a '1' when read. Enumeration: 'deleteEntry': 1.