CTFRAMER-CONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTFRAMER-CONFIG-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CTIF-EXT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ctFramerBaseConfig 1.3.6.1.4.1.52.4.3.3.9.1
     ctFramerConfigTable 1.3.6.1.4.1.52.4.3.3.9.1.1 no-access
A list of framer configuration objects for a physical port on a particular interface.
         ctFramerConfigEntry 1.3.6.1.4.1.52.4.3.3.9.1.1.1 no-access
An entry containing objects pertaining to the configuration of the framer on a physical port on an interface.
             ctFramerStatsConfig 1.3.6.1.4.1.52.4.3.3.9.1.1.1.1 integer read-write
Setting this object to 'on' will activate the framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET/SDH framing or DS3 framing respectively. Note: Setting this to 'on' will permit gathering of framer statistics at the expense of processing time. However, it might be a valuable debugging aid to turn on the framer MIB. Setting this object to 'off' will deactivate the respective framer MIBs, thus saving processing time. It is emphasized that collection of statistics for the framer is resource (processor, memory) intensive. This object is persistent. Enumeration: 'on': 1, 'off': 2.
             ctFramerAlarmsConfig 1.3.6.1.4.1.52.4.3.3.9.1.1.1.2 integer read-write
This object activates/deactivates the detection and initiation of framer alarms. for SONET/SDH framed physical ports: RDI - remote defect indicator AIS - alarm indication signal for DS3 framed physical ports: yellow signal alarms This object is persistent. Enumeration: 'on': 1, 'off': 2.
             ctFramerMediumConfig 1.3.6.1.4.1.52.4.3.3.9.1.1.1.3 integer read-write
This object controls whether a SONET or a SDH signal is used across this physical port. sonet - synchronous optical network sdh - synchronous digital heirarchy This object is persistent. Enumeration: 'sonet': 1, 'sdh': 2.
             ctFramerIdleCellsConfig 1.3.6.1.4.1.52.4.3.3.9.1.1.1.4 integer read-write
When this object is set to idle, null cells will have the CLP bit set. When this object is set to unassigned, null cells will not have the CLP bit set. This object is persistent. Enumeration: 'idle': 1, 'unassigned': 2.
             ctFramerCellPayScramConfig 1.3.6.1.4.1.52.4.3.3.9.1.1.1.5 integer read-write
This object activates/deactivates cell payload transmit scrambling and receive descrambling. This object is persistent. Enumeration: 'on': 1, 'off': 2.
 ctFramerSonetConfig 1.3.6.1.4.1.52.4.3.3.9.2
 ctFramerDS3Config 1.3.6.1.4.1.52.4.3.3.9.3