CTFPS-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTFPS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CTRON-MIB-NAMES

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fpsSystem 1.3.6.1.4.1.52.4.1.2.11.2.1
     fpsSystemSlotNum 1.3.6.1.4.1.52.4.1.2.11.2.1.1 integer read-only
The chassis slot of this FPS system.
     fpsSystemMode 1.3.6.1.4.1.52.4.1.2.11.2.1.2 integer read-only
The current operation mode of the FPS. Enumeration: 'bridge': 1, 'switch': 2.
     fpsMaxPktRam 1.3.6.1.4.1.52.4.1.2.11.2.1.3 integer read-only
The maximum number of packet buffers supported by the system.
     fpsFreePktRam 1.3.6.1.4.1.52.4.1.2.11.2.1.4 gauge read-only
The number of packet buffers currently free in the system.
     fpsOperTime 1.3.6.1.4.1.52.4.1.2.11.2.1.5 timeticks read-only
Indicates the amount of time the FPS has been operational.
     fpsInPkts 1.3.6.1.4.1.52.4.1.2.11.2.1.6 counter read-only
The number of packets received by the FPS since the last time the FPS became operational.
     fpsOutPkts 1.3.6.1.4.1.52.4.1.2.11.2.1.7 counter read-only
The number of packets forwarded by the FPS.
     fpsInOctets 1.3.6.1.4.1.52.4.1.2.11.2.1.8 counter read-only
The number of octets received by the FPS.
     fpsOutOctets 1.3.6.1.4.1.52.4.1.2.11.2.1.9 counter read-only
The number of octets forwarded by the FPS.
 fpsPort 1.3.6.1.4.1.52.4.1.2.11.2.2
     fpsActivePorts 1.3.6.1.4.1.52.4.1.2.11.2.2.1 integer read-only
The number of active FPS ports.
     fpsMaxPortNum 1.3.6.1.4.1.52.4.1.2.11.2.2.2 integer read-only
The maximum number of ports that this FPS system can support.
     fpsPortTable 1.3.6.1.4.1.52.4.1.2.11.2.2.3 no-access
A list of status and configuration information on active FPS ports in the system
         fpsPortEntry 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1 no-access
A collection of fps port status and configurations.
             fpsPortNum 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.1 integer read-only
FPS port number. A unique value in the range between 1 and fpsActivePorts.
             fpsPortIfNum 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.2 integer read-only
This object uniquely identifies the interface associated with the FPS port. This interface number is the same as the MIBII interface number, ifIndex, defined in RFC1213.
             fpsPortType 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.3 integer read-only
Media type of this FPS port. Enumeration: 'wan': 7, 'atm': 6, 'tokenRing': 2, 'host': 5, 'other': 8, 'ether': 1, 'inb': 3, 'fddi': 4.
             fpsPortClusterNum 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.4 integer read-only
FPS cluster associated with this FPS port. Cluster numbers are used to allocate FPS bandwidth for this port.
             fpsPortTotalAvailQueDepth 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.5 integer read-only
Que depth assigned to this FPS port's queue. This number represents the hardware limit for the queue and can be no greater than fpsPortMaxQueDepth for this FPS port.
             fpsPortMaxQueDepth 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.6 integer read-only
Maximum depth this queue can be set to for this FPS port. This number may be equal or less than the hardware limit.
             fpsPortCurrentQueDepth 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.7 integer read-only
The actual queue depth on this FPS port. This value is from (fpsPortTotalAvailQueDepth - the number of queue entries on the queue at any one time).
             fpsPortBandwidthRequested 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.8 integer read-only
Amount of bandwidth (in Mb/s) that this port is requesting from the FPS
             fpsPortBandwidthAllocated 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.9 integer read-only
Estimate of the actual bandwidth this port is receiving (in Mb/s) from the FPS. This value may be lower or higher than the required bandwidth.
             fpsPortXmitStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.10 integer read-only
Current state of this port's transmit enable bit in the Transmit Enable Register (LUFW). Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortFwdStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.11 integer read-only
Current state of this port's forward enable bit in the Forward Enable Register (LUFW). If enabled, the FPS will allow packets received on this port to be forwarded through the system Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortLearningStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.12 integer read-only
Current state of this port's bit in the Learn Enable Mask (LUFW). If enabled the FPS will allow dynamic learning on frames received on this port. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortUnknownStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.13 integer read-only
Current state of this port's bit in the Unkown Mask (LUFW). If enabled the FPS will forward packets that are unknown to this port. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortBroadcastStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.14 integer read-only
Current state of this port's bit in the Broadcast Mask (LUFW). If enabled the FPS will forward broadcast packets to this port. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortViolationStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.15 integer read-only
Current state of this port's bit in the Violation Mask (LUFW). If enabled the FPS will forward packets that are in violation to this port. Note: This value is only valid in connection mode. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortCopyStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.16 integer read-only
Current state of this port's bit in the Copy Mask (LUFW). If enabled the FPS will copy packets to this port whose BAF entry has the 'copyl' bit set. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortStatsStatus 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.17 integer read-only
Current state of this port's bit in the Statistics Mask (LUFW). If enabled the FPS will collect statistics on this port. These stats are found in the system table. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortSpecialPortsSMT 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.18 integer read-only
This object represents whether or not this port has been selected to receive SMT multicast and broadcast frames Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortSpecialPortsHost 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.19 integer read-only
This object represents whether or not this port has been selected to receive to-host frames Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortSpecialPortsError 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.20 integer read-only
This object represents whether or not this port has been selected to receive errored frames Enumeration: 'disabled': 2, 'enabled': 1.
 fpsCluster 1.3.6.1.4.1.52.4.1.2.11.2.3
     fpsActiveClusters 1.3.6.1.4.1.52.4.1.2.11.2.3.1 integer read-only
Number of valid FPS clusters in the system.
     fpsClusterTable 1.3.6.1.4.1.52.4.1.2.11.2.3.2 no-access
A list of fps cluster entries
         fpsClusterEntry 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1 no-access
A collection of fps cluster entries.
             fpsClusterNumber 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.1 integer read-only
The value of this object uniquely identifies the cluster table entry. Cluster numbers are mapped to FPS ports for bandwidth allocation.
             fpsClusterType 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.2 integer read-only
Media type of the FPS port that is attached to this cluster number. Enumeration: 'wan': 7, 'atm': 6, 'token-ring': 2, 'host': 5, 'fnb': 4, 'ethernet': 1, 'inb': 3.
             fpsClusterRoundRobin 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.3 integer read-write
Whether a cluster is signed up for RoundRobin arbitration or not. Round Robin clusters will be given unused time slices. Enumeration: 'disabled': 2, 'enabled': 1.
             fpsPortsPerCluster 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.4 integer read-only
Number of FPS ports that share this cluster number for FPS bandwidth.
 fpsDMAF 1.3.6.1.4.1.52.4.1.2.11.2.4
     dmafBandWidth3SecUtil 1.3.6.1.4.1.52.4.1.2.11.2.4.1 gauge read-only
Estimate of total FPS bandwidth utilized over the last three seconds as a function of DMAFTimeSlices. The counter represents hundreths of percent utilization. For example a count of 25 would represent .25 percent utilization.
 fpsBAF 1.3.6.1.4.1.52.4.1.2.11.2.5
     bafEntryCount 1.3.6.1.4.1.52.4.1.2.11.2.5.1 integer read-only
The number of entries currently used in this BAF. This number shall include static as well as dynamic entries
     bafMaxEntry 1.3.6.1.4.1.52.4.1.2.11.2.5.2 integer read-only
The maximum number of entries this BAF can hold per hardware. This includes static as well as dynamic entries
     baf3SecUtil 1.3.6.1.4.1.52.4.1.2.11.2.5.3 gauge read-only
Percentage of time that the BAF was utilized over the last three seconds. The Counter represents hundreths of percent. For example a value of 20 would represent .20 percent.