CT-PIC-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CT-PIC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CTRON-MIB-NAMES

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pic 1.3.6.1.4.1.52.4.1.5.9.1
     ctPicNumberEntries 1.3.6.1.4.1.52.4.1.5.9.1.1 gauge read-only
Defines the number of PIC modules defined by this MIB.
     ctPicTable 1.3.6.1.4.1.52.4.1.5.9.1.2 no-access
A table that describes the contents of all PIC modules accessible by this module.
         ctPicEntry 1.3.6.1.4.1.52.4.1.5.9.1.2.1 no-access
Description of a specific instance of a PIC module.
             ctPicSlot 1.3.6.1.4.1.52.4.1.5.9.1.2.1.1 integer read-only
Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0.
             ctPicIndex 1.3.6.1.4.1.52.4.1.5.9.1.2.1.2 integer read-only
Uniquely identifies the instance of a PIC in a particular slot.
             ctPicLocation 1.3.6.1.4.1.52.4.1.5.9.1.2.1.3 object identifier read-only
Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim.
             ctPicStatus 1.3.6.1.4.1.52.4.1.5.9.1.2.1.4 integer read-only
Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be functional notPresent(3) - PIC not found but expected checkSum(4) - A check sum error occured error(5) - An undefined error condition exists. limited(6) - A limited PIC implementation only type code information is present. Enumeration: 'limited': 6, 'checkSum': 4, 'other': 1, 'error': 5, 'notPresent': 3, 'present': 2.
             ctPicVersion 1.3.6.1.4.1.52.4.1.5.9.1.2.1.5 displaystring read-only
Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32).
             ctPicModuleType 1.3.6.1.4.1.52.4.1.5.9.1.2.1.6 object identifier read-only
Defines the standard module type value as defined in ctron-oids.
             ctPicMfgPN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.7 displaystring read-only
Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32).
             ctPicMfgSN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.8 displaystring read-only
Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32).
             ctPicMfgPartNumb 1.3.6.1.4.1.52.4.1.5.9.1.2.1.9 displaystring read-only
This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMfgSerialNumb 1.3.6.1.4.1.52.4.1.5.9.1.2.1.10 displaystring read-only
This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMfgReworkLocation 1.3.6.1.4.1.52.4.1.5.9.1.2.1.11 displaystring read-only
The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMfgMfgLocation 1.3.6.1.4.1.52.4.1.5.9.1.2.1.12 displaystring read-only
The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMfgDateCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.13 displaystring read-only
The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMfgRevisionCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.14 displaystring read-only
The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).
             ctPicTLPN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.15 displaystring read-only
Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this object is non-existent, it will be set to all blanks(ascii 32).
             ctPicTLSN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.16 displaystring read-only
Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 3 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32).
             ctPicTLPartNumb 1.3.6.1.4.1.52.4.1.5.9.1.2.1.17 displaystring read-only
This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicTLSerialNumb 1.3.6.1.4.1.52.4.1.5.9.1.2.1.18 displaystring read-only
This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicTLReworkLocation 1.3.6.1.4.1.52.4.1.5.9.1.2.1.19 displaystring read-only
The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicTLMfgLocation 1.3.6.1.4.1.52.4.1.5.9.1.2.1.20 displaystring read-only
The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicTLDateCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.21 displaystring read-only
The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicTLRevisionCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.22 displaystring read-only
The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).
             ctPicPcbRevision 1.3.6.1.4.1.52.4.1.5.9.1.2.1.23 displaystring read-only
Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMacAddr 1.3.6.1.4.1.52.4.1.5.9.1.2.1.24 octet string read-only
The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicNumbRsvdAddrs 1.3.6.1.4.1.52.4.1.5.9.1.2.1.25 integer read-only
The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0.
             ctPicBoardRevision 1.3.6.1.4.1.52.4.1.5.9.1.2.1.26 displaystring read-only
Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32).
             ctPicModuleTypeString 1.3.6.1.4.1.52.4.1.5.9.1.2.1.27 displaystring read-only
Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32).
             ctPicDCDCconverterType 1.3.6.1.4.1.52.4.1.5.9.1.2.1.28 displaystring read-only
Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).
             ctPicDCDCconvInputPower 1.3.6.1.4.1.52.4.1.5.9.1.2.1.29 displaystring read-only
Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).
             ctPicSMB1promVersion 1.3.6.1.4.1.52.4.1.5.9.1.2.1.30 displaystring read-only
Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32).
             ctPicAtmMacAddr 1.3.6.1.4.1.52.4.1.5.9.1.2.1.31 octet string read-write
The Atm MAC address(atm format)assigned to the chassis. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicOEMVendorId 1.3.6.1.4.1.52.4.1.5.9.1.2.1.32 integer read-only
Represents the OEM vendor for a product. If the Module does not program this value this object will be set to blanks (ascii 32). Enumeration: 'cabletron': 1, 'enTeraSys': 6, 'nEC': 2, 'newbridge': 5, 'cPQ': 4, 'dEC': 3.
             ctPicOEMVendorName 1.3.6.1.4.1.52.4.1.5.9.1.2.1.33 displaystring read-only
ASCII name of the OEM vendor for the product. If the Module does not program this value this object will be set to blanks (ascii 32).
             ctPicMfg97SN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.34 displaystring read-only
Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Board level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32).
             ctPicMfg97DateCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.35 displaystring read-only
The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicMfg97RevisionCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.36 displaystring read-only
The 2 character board level revision code field of this module. This object contains the same information as presented in ctPicMfg97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).
             ctPicTL97SN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.37 displaystring read-only
Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 4 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufacture location 2 bytes - Top level revision If any field of this object is non-existent, it will be set to all blanks(ascii 32).
             ctPicTL97DateCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.38 displaystring read-only
The 4 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).
             ctPicTL97RevisionCode 1.3.6.1.4.1.52.4.1.5.9.1.2.1.39 displaystring read-only
The 2 character top level revision code field of this module. This object contains the same information as presented in ctPicTL97SN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32).
             ctPicOEMTLSN 1.3.6.1.4.1.52.4.1.5.9.1.2.1.40 displaystring read-only
Describes the top level serial number of the module as specified by the OEM for this device. If non-existent, this object will be set to all blanks (ascii 32).
     ctPicECOTable 1.3.6.1.4.1.52.4.1.5.9.1.3 no-access
Each module that contains a PIC may have several ECOs performed on it. The ctPicECOTable reflects a history of the last 5 ECOs that have been performed on this module.
         ctPicECOEntry 1.3.6.1.4.1.52.4.1.5.9.1.3.1 no-access
Describes a particular PIC ECO entry.
             ctPicECOSlot 1.3.6.1.4.1.52.4.1.5.9.1.3.1.1 integer read-only
Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable.
             ctPicECOIndex 1.3.6.1.4.1.52.4.1.5.9.1.3.1.2 integer read-only
The specific PIC instance that this ECO entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable.
             ctPicECOID 1.3.6.1.4.1.52.4.1.5.9.1.3.1.3 integer read-only
Uniquely defines the ECO entry that is being described by this conceptual row.
             ctPicECONumber 1.3.6.1.4.1.52.4.1.5.9.1.3.1.4 displaystring read-only
Defines Cabletron's ECO number that describes the revision of the hardware. This object is organized as follows: 6 Characters ECO Number 2 Characters Rework Location 4 Characters Date Code
     ctPicLocationID 1.3.6.1.4.1.52.4.1.5.9.1.4
         ctPicLocationModule 1.3.6.1.4.1.52.4.1.5.9.1.4.1
         ctPicBrim 1.3.6.1.4.1.52.4.1.5.9.1.4.2
         ctPicChassis 1.3.6.1.4.1.52.4.1.5.9.1.4.3
         ctPicDaughter 1.3.6.1.4.1.52.4.1.5.9.1.4.4
         ctPicBackPlane 1.3.6.1.4.1.52.4.1.5.9.1.4.5
     ctPicDiagTable 1.3.6.1.4.1.52.4.1.5.9.1.5 no-access
Each module that contains a PIC may have several Diags performed on it. The ctPicDiagTable reflects a history of the last 8 Diags that have been performed on this module. Important: This table only contains entries diagnostic entries that are defined. Therefore it is possible for this table to be empty 'does not respond to a GET or GET-NEXT' if there are no diagnostic errors present.
         ctPicDiagEntry 1.3.6.1.4.1.52.4.1.5.9.1.5.1 no-access
Describes a particular PIC Diag entry.
             ctPicDiagSlot 1.3.6.1.4.1.52.4.1.5.9.1.5.1.1 integer read-only
Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. This refers to the same slot as identified by ctPicSlot in ctPicTable.
             ctPicDiagIndex 1.3.6.1.4.1.52.4.1.5.9.1.5.1.2 integer read-only
The specific PIC instance that this Diag entry pertains to. This refers to the same instance as identified by ctPicIndex in ctPicTable.
             ctPicDiagID 1.3.6.1.4.1.52.4.1.5.9.1.5.1.3 integer read-only
Uniquely defines the Diag entry that is being described by this conceptual row.
             ctPicDiagResults 1.3.6.1.4.1.52.4.1.5.9.1.5.1.4 displaystring read-only
Defines Cabletron's Diag results code.
     ctPicControlTable 1.3.6.1.4.1.52.4.1.5.9.1.8 no-access
A table allowing management control of PIC functionality.
         ctPicControlEntry 1.3.6.1.4.1.52.4.1.5.9.1.8.1 no-access
Describes a particular PIC Control Table entry.
             ctPicRefresh 1.3.6.1.4.1.52.4.1.5.9.1.8.1.1 integer read-only
Setting this value causes the PIC Driver to clear cached memory and to reread the PIC chip. This functionality removes the need for manufacturing to power cycle a board to ensure proper PIC programming. Reading this object always returns a zero (0). Enumeration: 'reFresh': 1.