COMPAQ-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: COMPAQ


 Home MIB: COMPAQ-L2MGMT-MIB
Download as:   
COMPAQ-ID-REC-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swCompaqL2Mgmt 1.3.6.1.4.1.232.161.3.2
The Structure of Common Management Information for making a trunk and IGMP related function for Compaq devices.
     swPortTrunkPackage 1.3.6.1.4.1.232.161.3.2.1
         swPortTrunkMaxEntries 1.3.6.1.4.1.232.161.3.2.1.1 integer read-only
The max entries of swPortTrunkTable
         swPortTrunkMaxPortMembers 1.3.6.1.4.1.232.161.3.2.1.2 integer read-only
The max number of ports allowed in a trunk.
         swPortTrunkTable 1.3.6.1.4.1.232.161.3.2.1.3 no-access
This table specifies the port membership for each logical link.
             swPortTrunkEntry 1.3.6.1.4.1.232.161.3.2.1.3.1 no-access
A list of information specifies which ports group form a single logical link.
                 swPortTrunkIndex 1.3.6.1.4.1.232.161.3.2.1.3.1.1 integer read-only
The index of logical port trunk.
                 swPortTrunkName 1.3.6.1.4.1.232.161.3.2.1.3.1.2 displaystring read-only
The name of logical port trunk.
                 swPortTrunkMasterPort 1.3.6.1.4.1.232.161.3.2.1.3.1.3 integer read-only
The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swPortTrunkPortList 1.3.6.1.4.1.232.161.3.2.1.3.1.4 portlist read-only
Indicate member ports of a logical trunk.
                 swPortTrunkState 1.3.6.1.4.1.232.161.3.2.1.3.1.5 rowstatus read-only
This object indicates the status of this entry.
     swPortMirrorPackage 1.3.6.1.4.1.232.161.3.2.2
         swPortMirrorMaxEntries 1.3.6.1.4.1.232.161.3.2.2.1 integer read-only
The max entries of this swPortMirrorCtrlTable
         swPortMirrorCtrlTable 1.3.6.1.4.1.232.161.3.2.2.2 no-access
A list of port snooping entries.Port mirroring function provides an easy way to monitor traffic on any port. In this way any good packets appears on the source mirror port also shows up on the target mirror port and doesn't to reconstruct the LAN.
             swPortMirrorCtrlEntry 1.3.6.1.4.1.232.161.3.2.2.2.1 no-access
A list of information provide an easy way to monitor traffic on any port. The use can bring a fancy network monitor attaching to any target mirror port and set the port to be monitored as source mirror port.
                 swPortMirrorIndex 1.3.6.1.4.1.232.161.3.2.2.2.1.1 integer read-only
This object indicates the port snooping entry number.There is just only one now.
                 swPortMirrorSourcePort 1.3.6.1.4.1.232.161.3.2.2.2.1.2 integer read-only
This object indicates the number of port to be sniffed. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
                 swPortMirrorTargetPort 1.3.6.1.4.1.232.161.3.2.2.2.1.3 integer read-only
This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
                 swPortMirrorDirection 1.3.6.1.4.1.232.161.3.2.2.2.1.4 integer read-only
This object uses to setup the what packets will be mirrored. Enumeration: 'egress': 3, 'both': 4, 'ingress': 2, 'other': 1.
                 swPortMirrorState 1.3.6.1.4.1.232.161.3.2.2.2.1.5 rowstatus read-only
This object indicates the status of this entry.
     swIGMPPackage 1.3.6.1.4.1.232.161.3.2.3
         swIGMPCtrlStatus 1.3.6.1.4.1.232.161.3.2.3.1 integer read-write
Enable the IGMP Control Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swIGMPCtrlMaxEntries 1.3.6.1.4.1.232.161.3.2.3.2 integer read-only
The max entries of this swIGMPCtrlTable
         swIGMPCtrlTable 1.3.6.1.4.1.232.161.3.2.3.3 no-access
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swVlanInfoStatus). If VLAN is disabled or in Mac-Base mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
             swIGMPCtrlEntry 1.3.6.1.4.1.232.161.3.2.3.3.1 no-access
The entry in IGMP control table (swIGMPCtrlTable). The entry is effective only when IGMP capture switch (swDevIGMPCaptureState) is enabled.
                 swIGMPCtrlVid 1.3.6.1.4.1.232.161.3.2.3.3.1.1 integer read-only
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12 , fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
                 swIGMPQueryInterval 1.3.6.1.4.1.232.161.3.2.3.3.1.2 integer read-only
The frequency at which IGMP Host-Query packets are transmitted on this interface.
                 swIGMPQueryMaxResponseTime 1.3.6.1.4.1.232.161.3.2.3.3.1.3 integer read-only
The maximum query response time advertised in IGMPv2 queries on this interface.
                 swIGMPRobustness 1.3.6.1.4.1.232.161.3.2.3.3.1.4 integer read-only
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. Note: for Version issue, when using IGMP V1, this item got no any sense, but v2 should be used.
                 swIGMPCtrlTimer 1.3.6.1.4.1.232.161.3.2.3.3.1.5 integer read-only
The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997. And it recommends a default of 125 seconds. The timeout value must be at least 30 seconds.
                 swIGMPQuerierVersion 1.3.6.1.4.1.232.161.3.2.3.3.1.6 integer read-only
Select the IGMP Querier Version Enumeration: 'v2Querier': 4, 'other': 1, 'v1Querier': 3, 'v0Querier': 2.
                 swIGMPCtrlState 1.3.6.1.4.1.232.161.3.2.3.3.1.7 rowstatus read-only
This object indicates the status of this entry.
         swIGMPIfnoMaxEntries 1.3.6.1.4.1.232.161.3.2.3.4 integer read-only
The max entries of this swIGMPInfoTable
         swIGMPInfoTable 1.3.6.1.4.1.232.161.3.2.3.5 no-access
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
             swIGMPInfoEntry 1.3.6.1.4.1.232.161.3.2.3.5.1 no-access
Information about current IGMP query information, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN entry are all enabled.
                 swIGMPInfoVid 1.3.6.1.4.1.232.161.3.2.3.5.1.1 integer read-only
This object indicates the Vid of associated IGMP info table entry. It follows swIGMPCtrlVid in the associated entry of IGMP control table (swIGMPCtrlTable).
                 swIGMPInfoQueryCount 1.3.6.1.4.1.232.161.3.2.3.5.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
                 swIGMPInfoTxQueryCount 1.3.6.1.4.1.232.161.3.2.3.5.1.3 integer read-only
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
         swIGMPTableMaxEntries 1.3.6.1.4.1.232.161.3.2.3.6 integer read-only
The max entries of swIGMPTable
         swIGMPTable 1.3.6.1.4.1.232.161.3.2.3.7 no-access
This table containing current IGMP information which is captured by this device, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swFdbFilterTable description also.
             swIGMPEntry 1.3.6.1.4.1.232.161.3.2.3.7.1 no-access
Information about IGMP information which is captured by this device, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN entry are all enabled.
                 swIGMPVid 1.3.6.1.4.1.232.161.3.2.3.7.1.1 integer read-only
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
                 swIGMPGroupIpAddr 1.3.6.1.4.1.232.161.3.2.3.7.1.2 ipaddress read-only
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
                 swIGMPMacAddr 1.3.6.1.4.1.232.161.3.2.3.7.1.3 macaddress read-only
This object is to identify the mac address corresponding to swIGMPGroupIpAddr, in per-Vlan basis..
                 swIGMPPortMap 1.3.6.1.4.1.232.161.3.2.3.7.1.4 portlist read-only
This object indicates which ports are belonged to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. .
                 swIGMPIpGroupReportCount 1.3.6.1.4.1.232.161.3.2.3.7.1.5 integer read-only
This object indicates how many report packets are received by our device corresponding to this entry since IGMP function is enabled, in per-Vlan basis. .