CISCOSB-vlan-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCOSB-vlan-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, INET-ADDRESS-MIB, CISCOSB-BRIDGEMIBOBJECTS-MIB, BRIDGE-MIB, SNMPv2-TC, CISCOSB-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vlan 1.3.6.1.4.1.9.6.1.101.48
The private MIB module definition for IP Multicast support in CISCOSB devices.
       vlanMibVersion 1.3.6.1.4.1.9.6.1.101.48.1 integer read-only
MIB's version : Version 2: the current VLAN MIB replaced the previous one; Version 3: field vlanPortForbiddenEgressPort was added. Version 4: dot1q and dot1v supported Version 5: Private Edge Vlan vlanPrivateEdgeSupported vlanPrivateEdgeMibVersion vlanPrivateEdgeTable
       vlanMaxTableNumber 1.3.6.1.4.1.9.6.1.101.48.2 integer read-only
Maximum number of VLAN Tables supported by the device.
       vlanNameTable 1.3.6.1.4.1.9.6.1.101.48.21 no-access
This table translates Vlan name to Vlan's tag and ifindex
             vlanNameEntry 1.3.6.1.4.1.9.6.1.101.48.21.1 no-access
The row definition for this table.
                 vlanNameName 1.3.6.1.4.1.9.6.1.101.48.21.1.1 displaystring read-only
The Vlan's name
                 vlanNameTag 1.3.6.1.4.1.9.6.1.101.48.21.1.2 integer read-only
The Vlan's tag
                 vlanNameIfIndex 1.3.6.1.4.1.9.6.1.101.48.21.1.3 integer read-only
The Vlan's ifindex
       vlanPortModeTable 1.3.6.1.4.1.9.6.1.101.48.22 no-access
This table hold information on port status trunk or access
             vlanPortModeEntry 1.3.6.1.4.1.9.6.1.101.48.22.1 no-access
The row definition for this table.
                 vlanPortModeState 1.3.6.1.4.1.9.6.1.101.48.22.1.1 integer read-write
The port state, 1 is generic cli
       vlanSendUnknownToAllPorts 1.3.6.1.4.1.9.6.1.101.48.27 truthvalue read-write
If a value of the parameter is true a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be sent to all ports of the VLAN. If a value of the parameter is false a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be discarded.
       vlanDefaultSupported 1.3.6.1.4.1.9.6.1.101.48.29 truthvalue read-only
supported or not default vlan.
       vlanDot1vSupported 1.3.6.1.4.1.9.6.1.101.48.31 truthvalue read-only
802.1v standard for vlan per port and protocol.
       vlanDefaultEnabled 1.3.6.1.4.1.9.6.1.101.48.32 truthvalue read-write
if supported default vlan , indicate enabled or disabled
       vlanSpecialTagTable 1.3.6.1.4.1.9.6.1.101.48.33 no-access
special vlan tag used for this port
             vlanSpecialTagEntry 1.3.6.1.4.1.9.6.1.101.48.33.1 no-access
entry of special tag
                 vlanSpecialTagVID 1.3.6.1.4.1.9.6.1.101.48.33.1.1 vlanindex read-write
specify the special vlan tag .
                 vlanSpecialTagStatus 1.3.6.1.4.1.9.6.1.101.48.33.1.2 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanSpecialTagCurrentTable 1.3.6.1.4.1.9.6.1.101.48.34 no-access
special Current vlan tag used for this port
             vlanSpecialTagCurrentEntry 1.3.6.1.4.1.9.6.1.101.48.34.1 no-access
entry of Current special tag
                 vlanSpecialTagCurrentVID 1.3.6.1.4.1.9.6.1.101.48.34.1.1 vlanindex read-only
specify the special vlan tag .
                 vlanSpecialTagCurrentReserved 1.3.6.1.4.1.9.6.1.101.48.34.1.2 truthvalue read-only
specify if the special vlan tag is reserved .
                 vlanSpecialTagCurrentActive 1.3.6.1.4.1.9.6.1.101.48.34.1.3 truthvalue read-only
specify if the special vlan tag is used .
       vlanPrivateEdgeSupported 1.3.6.1.4.1.9.6.1.101.48.35 truthvalue read-only
is private edge supported.
       vlanPrivateEdgeVersion 1.3.6.1.4.1.9.6.1.101.48.36 integer read-only
private edge version.
       vlanPrivateEdgeTable 1.3.6.1.4.1.9.6.1.101.48.37 no-access
table for pve port and uplink
             vlanPrivateEdgeEntry 1.3.6.1.4.1.9.6.1.101.48.37.1 no-access
entry of pve
                 vlanPrivateEdgeUplink 1.3.6.1.4.1.9.6.1.101.48.37.1.1 integer read-write
specify the uplink port.
                 vlanPrivateEdgeStatus 1.3.6.1.4.1.9.6.1.101.48.37.1.2 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanDynamicVlanSupported 1.3.6.1.4.1.9.6.1.101.48.38 truthvalue read-only
is DynamicVlanVlan supported.
       vlanDynamicVlanTable 1.3.6.1.4.1.9.6.1.101.48.39 no-access
table for DynamicVlan
             vlanDynamicVlanEntry 1.3.6.1.4.1.9.6.1.101.48.39.1 no-access
entry of DynamicVlan
                 vlanDynamicVlanMacAddress 1.3.6.1.4.1.9.6.1.101.48.39.1.1 macaddress no-access
mac address
                 vlanDynamicVlanTag 1.3.6.1.4.1.9.6.1.101.48.39.1.2 vlanindex read-write
vlan Tag
                 vlanDynamicVlanStatus 1.3.6.1.4.1.9.6.1.101.48.39.1.3 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanPortModeExtTable 1.3.6.1.4.1.9.6.1.101.48.40 no-access
This table hold information on port status trunk or access
             vlanPortModeExtEntry 1.3.6.1.4.1.9.6.1.101.48.40.1 no-access
The row definition for this table.
                 vlanPortModeExtState 1.3.6.1.4.1.9.6.1.101.48.40.1.1 integer read-write
The ext
                 vlanPortModeExtStatus 1.3.6.1.4.1.9.6.1.101.48.40.1.2 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanPrivateSupported 1.3.6.1.4.1.9.6.1.101.48.41 truthvalue read-only
is private vlan supported.
       vlanPrivateTableOld 1.3.6.1.4.1.9.6.1.101.48.42 no-access
table for PrivateVlan
             vlanPrivateEntryOld 1.3.6.1.4.1.9.6.1.101.48.42.1 no-access
entry of PrivateVlan
                 vlanPrivateOldIsolatedVlanTag 1.3.6.1.4.1.9.6.1.101.48.42.1.1 integer read-write
vlan Tag
                 vlanPrivateOldStatus 1.3.6.1.4.1.9.6.1.101.48.42.1.2 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanPrivateCommunityTable 1.3.6.1.4.1.9.6.1.101.48.43 no-access
table for PrivateVlan
             vlanPrivateCommunityEntry 1.3.6.1.4.1.9.6.1.101.48.43.1 no-access
entry of PrivateVlan
                 vlanPrivateCommunityVlanTag 1.3.6.1.4.1.9.6.1.101.48.43.1.1 vlanindex no-access
vlan Tag
                 vlanPrivateCommunityStatus 1.3.6.1.4.1.9.6.1.101.48.43.1.2 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanMulticastTvTable 1.3.6.1.4.1.9.6.1.101.48.44 no-access
multicast vlan used for this port
             vlanMulticastTvEntry 1.3.6.1.4.1.9.6.1.101.48.44.1 no-access
entry of multicast tag
                 vlanMulticastTvVID 1.3.6.1.4.1.9.6.1.101.48.44.1.1 vlanindex read-write
specify the TV vlan tag, vlan must exist .
                 vlanMulticastTvStatus 1.3.6.1.4.1.9.6.1.101.48.44.1.2 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanMacBaseVlanGroupTable 1.3.6.1.4.1.9.6.1.101.48.45 no-access
A table that contains mappings from Range of MAC addresses to Group Identifiers used for MAC-based VLAN Classification.
             vlanMacBaseVlanGroupEntry 1.3.6.1.4.1.9.6.1.101.48.45.1 no-access
A mapping from a Range of MAC addresses to a Group Identifier.
                 vlanMacBaseVlanMacAddress 1.3.6.1.4.1.9.6.1.101.48.45.1.1 macaddress no-access
The base MAC address of the range.
                 vlanMacBaseVlanMacMask 1.3.6.1.4.1.9.6.1.101.48.45.1.2 integer no-access
The Mask of the range. The mask determains the leading '1' bits of the mask (MSB). 48 means single HOST and 9 means the widest range. The MASK is limited to 9 to avoid entring ranges including multicast addresses.
                 vlanMacBaseVlanGroupId 1.3.6.1.4.1.9.6.1.101.48.45.1.3 integer read-only
Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame.
                 vlanMacBaseVlanGroupRowStatus 1.3.6.1.4.1.9.6.1.101.48.45.1.4 rowstatus read-only
This object indicates the status of this entry.
       vlanMacBaseVlanPortTable 1.3.6.1.4.1.9.6.1.101.48.46 no-access
A table that contains VID sets used for MAC-based VLAN Classification.
             vlanMacBaseVlanPortEntry 1.3.6.1.4.1.9.6.1.101.48.46.1 no-access
A VID set for a port and group.
                 vlanMacBaseVlanPortGroupId 1.3.6.1.4.1.9.6.1.101.48.46.1.1 integer no-access
Designates a group of Ranges in the ranges Group Database.
                 vlanMacBaseVlanPortGroupVid 1.3.6.1.4.1.9.6.1.101.48.46.1.2 vlanindex read-only
The VID associated with a group of range MAC addresses for each port.
                 vlanMacBaseVlanPortRowStatus 1.3.6.1.4.1.9.6.1.101.48.46.1.3 rowstatus read-only
This object indicates the status of this entry.
       vlanPrivateEdgeGroupTable 1.3.6.1.4.1.9.6.1.101.48.47 no-access
table for pve port and uplink
             vlanPrivateEdgeGroupEntry 1.3.6.1.4.1.9.6.1.101.48.47.1 no-access
entry of pve
                 vlanPrivateEdgeGroupSource 1.3.6.1.4.1.9.6.1.101.48.47.1.1 integer read-only
specify the uplink group.
                 vlanPrivateEdgeGroupUplink 1.3.6.1.4.1.9.6.1.101.48.47.1.2 integer read-write
specify the uplink port.
                 vlanPrivateEdgeGroupStatus 1.3.6.1.4.1.9.6.1.101.48.47.1.3 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanPrivateEdgeGroupIfIndexTable 1.3.6.1.4.1.9.6.1.101.48.48 no-access
table for pve port and uplink
             vlanPrivateEdgeGroupIfIndexEntry 1.3.6.1.4.1.9.6.1.101.48.48.1 no-access
entry of pve
                 vlanPrivateEdgeGroupIfIndexID 1.3.6.1.4.1.9.6.1.101.48.48.1.1 integer read-only
specify the ifIndex group id.
                 vlanPrivateEdgeGroupIfIndexDomainID 1.3.6.1.4.1.9.6.1.101.48.48.1.2 integer read-only
specify the ifIndex group id.
       vlanSubnetRangeTable 1.3.6.1.4.1.9.6.1.101.48.49 no-access
A table that contains mappings from subnet range to Group Identifiers used for Port-and-subnet-based VLAN Classification.
             vlanSubnetRangeEntry 1.3.6.1.4.1.9.6.1.101.48.49.1 no-access
A mapping from a subnet to a Group Identifier.
                 vlanSubnetRangeAddr 1.3.6.1.4.1.9.6.1.101.48.49.1.1 ipaddress read-only
The IP address of the range
                 vlanSubnetRangeMask 1.3.6.1.4.1.9.6.1.101.48.49.1.2 integer read-only
The numbers of continuous ones in the mask
                 vlanSubnetRangeGroupId 1.3.6.1.4.1.9.6.1.101.48.49.1.3 integer read-only
Represents a group of subnets that are associated together when assigning a VID to a frame.
                 vlanSubnetRangeRowStatus 1.3.6.1.4.1.9.6.1.101.48.49.1.4 rowstatus read-only
This object indicates the status of this entry.
       vlanSubnetPortTable 1.3.6.1.4.1.9.6.1.101.48.50 no-access
A table that contains VID sets used for Port-and-subnet-based VLAN Classification.
             vlanSubnetPortEntry 1.3.6.1.4.1.9.6.1.101.48.50.1 no-access
A VID set for a port.
                 vlanSubnetPortGroupId 1.3.6.1.4.1.9.6.1.101.48.50.1.1 integer no-access
Designates a group of subnets in the Group Database.
                 vlanSubnetPortGroupVid 1.3.6.1.4.1.9.6.1.101.48.50.1.2 integer read-only
The VID associated with a group of subnets for each port.
                 vlanSubnetPortRowStatus 1.3.6.1.4.1.9.6.1.101.48.50.1.3 rowstatus read-only
This object indicates the status of this entry.
       vlanTriplePlayTable 1.3.6.1.4.1.9.6.1.101.48.51 no-access
TriplePlay table, map CPE vlan to multicastTvVlan
             vlanTriplePlayEntry 1.3.6.1.4.1.9.6.1.101.48.51.1 no-access
entry of TriplePlay table
                 vlanTriplePlayInnerVID 1.3.6.1.4.1.9.6.1.101.48.51.1.1 vlanindex no-access
Specifies the CPE inner vlan.
                 vlanTriplePlayMulticastTvVID 1.3.6.1.4.1.9.6.1.101.48.51.1.2 vlanindex read-only
Specifies the multicast TV outer vlan.
                 vlanTriplePlayRowStatus 1.3.6.1.4.1.9.6.1.101.48.51.1.3 rowstatus read-only
The row status variable, used according to row creation and removal conventions.
       vlanTriplePlayMulticastTvTable 1.3.6.1.4.1.9.6.1.101.48.52 no-access
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
             vlanTriplePlayMulticatTvEntry 1.3.6.1.4.1.9.6.1.101.48.52.1 no-access
entry of triple play MulticastTv table
                 vlanTriplePlayMulticastTvMulticastTvVID 1.3.6.1.4.1.9.6.1.101.48.52.1.1 vlanindex read-only
Specifies the multicast TV external vlan.
                 vlanTriplePlayMulticastTvMulticastTvPortList 1.3.6.1.4.1.9.6.1.101.48.52.1.2 portlist read-write
the multicast tv port list.
       vlanDefaultExtManagment 1.3.6.1.4.1.9.6.1.101.48.53 truthvalue read-write
enable disable ext managment on default vlan.
       vlanVoice 1.3.6.1.4.1.9.6.1.101.48.54
             vlanVoiceAgingTimeout 1.3.6.1.4.1.9.6.1.101.48.54.1 integer read-write
The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
             vlanVoiceTable 1.3.6.1.4.1.9.6.1.101.48.54.2 no-access
A table containing static configuration information for each voice VLAN configured into the device and dynamic port membership. All entries are permanent and will be restored after the device is reset.
                 vlanVoiceEntry 1.3.6.1.4.1.9.6.1.101.48.54.2.1 no-access
Information for a voice VLAN configured into the device by management.
                     vlanVoicePriority 1.3.6.1.4.1.9.6.1.101.48.54.2.1.1 integer read-write
An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge.
                     vlanVoicePriorityRemark 1.3.6.1.4.1.9.6.1.101.48.54.2.1.2 truthvalue read-only
Remark VPT on tagged frames egress the voice vlan according. to priority true.false
                     vlanVoiceRowStatus 1.3.6.1.4.1.9.6.1.101.48.54.2.1.3 rowstatus read-only
This object indicates the status of this entry.
             vlanVoiceOUITable 1.3.6.1.4.1.9.6.1.101.48.54.3 no-access
A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset.
                 vlanVoiceOUIEntry 1.3.6.1.4.1.9.6.1.101.48.54.3.1 no-access
Information for a voice VLANs OUI MAC Prefixes configured into the device by management.
                     vlanVoiceOUIPrefix 1.3.6.1.4.1.9.6.1.101.48.54.3.1.1 octet string no-access
The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUITable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address.
                     vlanVoiceOUIDescription 1.3.6.1.4.1.9.6.1.101.48.54.3.1.2 displaystring read-write
An optional text that describes the OUI.
                     vlanVoiceOUIEntryRowStatus 1.3.6.1.4.1.9.6.1.101.48.54.3.1.3 rowstatus read-only
This object indicates the status of this entry.
             vlanVoicePortTable 1.3.6.1.4.1.9.6.1.101.48.54.4 no-access
A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset.
                 vlanVoicePortEntry 1.3.6.1.4.1.9.6.1.101.48.54.4.1 no-access
Static and dynamic per port information for a voice VLAN.
                     vlanVoicePortEnable 1.3.6.1.4.1.9.6.1.101.48.54.4.1.1 truthvalue read-write
Enable this port to be a candidate to be added into the Voice VLAN.
                     vlanVoicePortVlanIndex 1.3.6.1.4.1.9.6.1.101.48.54.4.1.2 vlanindex read-write
The Voice VLAN-ID the port is a candidate to be in.
                     vlanVoicePortSecure 1.3.6.1.4.1.9.6.1.101.48.54.4.1.3 truthvalue read-write
Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped.
                     vlanVoicePortCurrentMembership 1.3.6.1.4.1.9.6.1.101.48.54.4.1.4 integer read-only
Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled. Enumeration: 'active': 1, 'notActive': 2.
                     vlanVoicePortQosMode 1.3.6.1.4.1.9.6.1.101.48.54.4.1.5 integer read-write
Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan. Enumeration: 'src': 1, 'all': 2.
             vlanVoiceOUISetToDefault 1.3.6.1.4.1.9.6.1.101.48.54.5 truthvalue read-write
The vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUITable should be previuosly deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'.
       vlanDefault 1.3.6.1.4.1.9.6.1.101.48.55
             vlanDefaultTaggedPorts 1.3.6.1.4.1.9.6.1.101.48.55.1 portlist read-write
list of default valn tagged ports.
             vlanDefaultEnabledPorts 1.3.6.1.4.1.9.6.1.101.48.55.2 portlist read-write
List of default VLAN membership enabled ports.
       vlanInetTriplePlayTable 1.3.6.1.4.1.9.6.1.101.48.56 no-access
TriplePlay table, map CPE vlan to multicastTvVlan
             vlanInetTriplePlayEntry 1.3.6.1.4.1.9.6.1.101.48.56.1 no-access
entry of TriplePlay table
                 vlanInetTriplePlayInetAddressType 1.3.6.1.4.1.9.6.1.101.48.56.1.1 inetaddresstype read-only
Inet type IPv4/IPv6.
                 vlanInetTriplePlayInnerVID 1.3.6.1.4.1.9.6.1.101.48.56.1.2 vlanindex no-access
Specifies the CPE inner vlan.
                 vlanInetTriplePlayMulticastTvVID 1.3.6.1.4.1.9.6.1.101.48.56.1.3 vlanindex read-only
Specifies the multicast TV outer vlan.
                 vlanInetTriplePlayRowStatus 1.3.6.1.4.1.9.6.1.101.48.56.1.4 rowstatus read-only
The row status variable, used according to row creation and removal conventions.
       vlanInetTriplePlayMulticastTvTable 1.3.6.1.4.1.9.6.1.101.48.57 no-access
TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan
             vlanInetTriplePlayMulticatTvEntry 1.3.6.1.4.1.9.6.1.101.48.57.1 no-access
entry of triple play MulticastTv table
                 vlanInetTriplePlayMulticastTvMulticastTvVID 1.3.6.1.4.1.9.6.1.101.48.57.1.1 vlanindex read-only
Specifies the multicast TV external vlan.
                 vlanInetTriplePlayMulticastTvMulticastTvPortList 1.3.6.1.4.1.9.6.1.101.48.57.1.2 portlist read-write
the multicast tv port list.
       vlanAsymmetricEnabled 1.3.6.1.4.1.9.6.1.101.48.58 truthvalue read-write
Indicates enabled or disabled of Asymetric Vlan
       vlanPrivateTable 1.3.6.1.4.1.9.6.1.101.48.59 no-access
Private vlan table which contains the private vlan entries.
             vlanPrivateEntry 1.3.6.1.4.1.9.6.1.101.48.59.1 no-access
Private vlan entry which contains the private vlan definition.
                 vlanPrivateVid 1.3.6.1.4.1.9.6.1.101.48.59.1.1 vlanindex no-access
The static vlan ID which is set to one of the private vlan types.
                 vlanPrivateType 1.3.6.1.4.1.9.6.1.101.48.59.1.2 integer read-write
private vlan types: primary - Carries traffic from promiscuous ports. promiscuous port can communicate with all ports of the same PVLAN, including the isolated and community ports of the same PVLAN. isolated - Carries traffic from isolated ports. isolated ports can communicate only with the promiscuous ports of the same PVLAN. community - Carries traffic from community ports. community ports of the same community can communicate among themselves and with the promiscuous ports of the same PVLAN. Enumeration: 'primary': 1, 'community': 3, 'isolated': 2.
                 vlanPrivatePrimaryVid 1.3.6.1.4.1.9.6.1.101.48.59.1.3 vlanindex read-only
The primary vlan ID which has defined in VlanPrivateEntry and which is associated with secondary vlan (in vlanPrivateMapTable). vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is primary vlan.
                 vlanPrivateStatus 1.3.6.1.4.1.9.6.1.101.48.59.1.4 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanPrivateMapTable 1.3.6.1.4.1.9.6.1.101.48.60 no-access
Private vlan mapping table which contains the private vlan mapping entries.
             vlanPrivateMapEntry 1.3.6.1.4.1.9.6.1.101.48.60.1 no-access
Private vlan mapping entry which contains the primary / secondary private vlan association and their ports membership.
                 vlanPrivateMapPrimaryVid 1.3.6.1.4.1.9.6.1.101.48.60.1.1 vlanindex no-access
The primary private vlan ID which is associated with the secondary (isolated or community) vlan (vlanPrivateMapSecondaryVid).
                 vlanPrivateMapSecondaryVid 1.3.6.1.4.1.9.6.1.101.48.60.1.2 vlanindex no-access
The secondary private vlan ID which is associated with the primary vlan (vlanPrivateMapPrimaryVid).
                 vlanPrivateMapPrimaryPorts 1.3.6.1.4.1.9.6.1.101.48.60.1.3 portlist read-write
The private vlan promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
                 vlanPrivateMapSecondaryPorts 1.3.6.1.4.1.9.6.1.101.48.60.1.4 portlist read-write
The private vlan host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.
                 vlanPrivateMapStatus 1.3.6.1.4.1.9.6.1.101.48.60.1.5 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       vlanTrunkPortModeTable 1.3.6.1.4.1.9.6.1.101.48.61 no-access
The tables contains trunk mode port entries.
             vlanTrunkPortModeEntry 1.3.6.1.4.1.9.6.1.101.48.61.1 no-access
The entry contains port ifIndex,native vlan id and vlan list the port has a membership. The vlan list can contain not created vlans.
                 vlanTrunkPortModeNativeVlanId 1.3.6.1.4.1.9.6.1.101.48.61.1.1 vlanindex read-write
Indicated native vlan index.Default value 0
                 vlanTrunkModeList1to1024 1.3.6.1.4.1.9.6.1.101.48.61.1.2 vlanlist1 read-write
vlan trunk mode list 1. Default value is {0}
                 vlanTrunkModeList1025to2048 1.3.6.1.4.1.9.6.1.101.48.61.1.3 vlanlist2 read-write
vlan trunk mode list 2. Default value is {0}
                 vlanTrunkModeList2049to3072 1.3.6.1.4.1.9.6.1.101.48.61.1.4 vlanlist3 read-write
vlan trunk mode list 3. Default value is {0}
                 vlanTrunkModeList3073to4094 1.3.6.1.4.1.9.6.1.101.48.61.1.5 vlanlist4 read-write
vlan trunk mode list 4. Default value is {0}
       vlanAccessPortModeTable 1.3.6.1.4.1.9.6.1.101.48.62 no-access
The tables contains access mode port entries.
             vlanAccessPortModeEntry 1.3.6.1.4.1.9.6.1.101.48.62.1 no-access
The entry contains port ifIndex,access vlan id and multicast TV vlan id.
                 vlanAccessPortModeVlanId 1.3.6.1.4.1.9.6.1.101.48.62.1.1 vlanindex read-write
Indicated access vlan id.Default value is 0
                 vlanAccessPortModeMcstTvVlanId 1.3.6.1.4.1.9.6.1.101.48.62.1.2 vlanindex read-write
Indicated multicast TV vlan id.
       vlanCustomerPortModeTable 1.3.6.1.4.1.9.6.1.101.48.63 no-access
The tables contains customer mode port entries.
             vlanCustomerPortModeEntry 1.3.6.1.4.1.9.6.1.101.48.63.1 no-access
The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id.
                 vlanCustomerPortModeVlanId 1.3.6.1.4.1.9.6.1.101.48.63.1.1 vlanindex read-write
Indicated customer vlan id.Default value is 0
                 vlanCustomerPortModeMtvList1to1024 1.3.6.1.4.1.9.6.1.101.48.63.1.2 vlanlist1 read-only
vlan customer port mode multicast TV list 1. Default value is {0}
                 vlanCustomerPortModeMtvList1025to2048 1.3.6.1.4.1.9.6.1.101.48.63.1.3 vlanlist2 read-only
vlan customer port mode multicast TV list 2. Default value is {0}
                 vlanCustomerPortModeMtvList2049to3072 1.3.6.1.4.1.9.6.1.101.48.63.1.4 vlanlist3 read-only
vlan customer port mode multicast TV list 3. Default value is {0}
                 vlanCustomerPortModeMtvList3073to4094 1.3.6.1.4.1.9.6.1.101.48.63.1.5 vlanlist4 read-only
vlan customer port mode multicast TV list 4. Default value is {0}
       vlanSwitchPortModeTable 1.3.6.1.4.1.9.6.1.101.48.64 no-access
The table defines L3/L2 port context.
             vlanSwitchPortModeEntry 1.3.6.1.4.1.9.6.1.101.48.64.1 no-access
The entry contains port ifIndex and switch port enable value.
                 vlanSwitchPortModeCategory 1.3.6.1.4.1.9.6.1.101.48.64.1.1 integer read-write
Indicated if a port is switchport (l2 port) or no switchport (l3 port) 1 - switchport 2 - no switchport. Default is 1 Enumeration: 'l2': 1, 'l3': 2.
       vlanPortModeContextTable 1.3.6.1.4.1.9.6.1.101.48.65 no-access
The tables contains current port mode context entries.
             vlanPortModeContextEntry 1.3.6.1.4.1.9.6.1.101.48.65.1 no-access
The entry contains current port mode context.
                 vlanPortModeContextValue 1.3.6.1.4.1.9.6.1.101.48.65.1.1 integer read-write
Indicated port context value: 0. Lag 1. Monitor 2. L3 3. RAVA 4. Dot1x 5. Dot1q 6. Access 7. Trunk 8. Customer 9. PV_promisc 10. PV_host
       vlanRsvlEnable 1.3.6.1.4.1.9.6.1.101.48.66 integer read-write
Enable / Disable Shared Vlans at the device. Enumeration: 'enable': 1, 'disable': 2.
       vlanRsvlMapTable 1.3.6.1.4.1.9.6.1.101.48.67 no-access
Shared vlan learning mapping table which contains the SVL mapping entries.
             vlanRsvlMapEntry 1.3.6.1.4.1.9.6.1.101.48.67.1 no-access
SVL mapping entry which contains the primary / secondary SVL association.
                 vlanRsvlMapPrimaryVid 1.3.6.1.4.1.9.6.1.101.48.67.1.1 vlanindex no-access
The primary SVL ID which is associated with the secondary shared vlan vlanRsvlMapSecondaryVid.
                 vlanRsvlMapSecondaryVid 1.3.6.1.4.1.9.6.1.101.48.67.1.2 vlanindex no-access
The secondary SVL ID which is associated with the primary shared vlan vlanRsvlMapPrimaryVid.
                 vlanRsvlMapStatus 1.3.6.1.4.1.9.6.1.101.48.67.1.3 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
       rldot1qPortVlanStaticTable 1.3.6.1.4.1.9.6.1.101.48.68 no-access
A table containing static vlan port membership information.
             rldot1qPortVlanStaticEntry 1.3.6.1.4.1.9.6.1.101.48.68.1 no-access
Static vlan membership information per port
                 rldot1qPortVlanStaticEgressList1to1024 1.3.6.1.4.1.9.6.1.101.48.68.1.1 vlanlist1 read-write
The port egress vlan static list.Default value is {0}
                 rldot1qPortVlanStaticEgressList1025to2048 1.3.6.1.4.1.9.6.1.101.48.68.1.2 vlanlist2 read-write
The port egress vlan static list.Default value is {0}
                 rldot1qPortVlanStaticEgressList2049to3072 1.3.6.1.4.1.9.6.1.101.48.68.1.3 vlanlist3 read-write
The port egress vlan static list.Default value is {0}
                 rldot1qPortVlanStaticEgressList3073to4094 1.3.6.1.4.1.9.6.1.101.48.68.1.4 vlanlist4 read-write
The port egress vlan static list.Default value is {0}
                 rldot1qPortVlanStaticUntaggedEgressList1to1024 1.3.6.1.4.1.9.6.1.101.48.68.1.5 vlanlist1 read-write
The port egress untagged vlan static list.Default value is {0}
                 rldot1qPortVlanStaticUntaggedEgressList1025to2048 1.3.6.1.4.1.9.6.1.101.48.68.1.6 vlanlist2 read-write
The port egress untagged vlan static list.Default value is {0}
                 rldot1qPortVlanStaticUntaggedEgressList2049to3072 1.3.6.1.4.1.9.6.1.101.48.68.1.7 vlanlist3 read-write
The port egress untagged vlan static list.Default value is {0}
                 rldot1qPortVlanStaticUntaggedEgressList3073to4094 1.3.6.1.4.1.9.6.1.101.48.68.1.8 vlanlist4 read-write
The port egress untagged vlan static list.Default value is {0}
                 rldot1qPortVlanStaticForbiddenList1to1024 1.3.6.1.4.1.9.6.1.101.48.68.1.9 vlanlist1 read-write
The port forbidden vlan static list.Default value is {0}
                 rldot1qPortVlanStaticForbiddenList1025to2048 1.3.6.1.4.1.9.6.1.101.48.68.1.10 vlanlist2 read-write
The port forbidden vlan static list.Default value is {0}
                 rldot1qPortVlanStaticForbiddenList2049to3072 1.3.6.1.4.1.9.6.1.101.48.68.1.11 vlanlist3 read-write
The port forbidden vlan static list.Default value is {0}
                 rldot1qPortVlanStaticForbiddenList3073to4094 1.3.6.1.4.1.9.6.1.101.48.68.1.12 vlanlist4 read-write
The port forbidden vlan static list.Default value is {0}
       rldot1qVlanStaticListTable 1.3.6.1.4.1.9.6.1.101.48.69 no-access
A table contains only one entry of a static vlan list.
             rldot1qVlanStaticListEntry 1.3.6.1.4.1.9.6.1.101.48.69.1 no-access
Staticly created by local or network management vlan list
                 rldot1qVlanStaticListIndex 1.3.6.1.4.1.9.6.1.101.48.69.1.1 integer read-write
An index is entrie's sequence. This field substitutes a vlan type. If the vlan was created by user configuration then the type is static. If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp. If the vlan was created by Radius server attribute assignment mechanism then the type is dynamicRava. Enumeration: 'dynamicRava': 2, 'dynamicGvrp': 1, 'static': 0.
                 rldot1qVlanStaticList1to1024 1.3.6.1.4.1.9.6.1.101.48.69.1.2 vlanlist1 read-write
A list of staticaly created vlans from 1 to 1024.
                 rldot1qVlanStaticList1025to2048 1.3.6.1.4.1.9.6.1.101.48.69.1.3 vlanlist2 read-write
A list of according to the type field created vlans from 1025 to 2048.
                 rldot1qVlanStaticList2049to3072 1.3.6.1.4.1.9.6.1.101.48.69.1.4 vlanlist3 read-write
A list of according to the type field created vlans from 2049 to 3072.
                 rldot1qVlanStaticList3073to4094 1.3.6.1.4.1.9.6.1.101.48.69.1.5 vlanlist4 read-write
A list of according to the type field created vlans from 3073 to 4094.
       rldot1qVlanStaticNameTable 1.3.6.1.4.1.9.6.1.101.48.70 no-access
A table contains created by user vlans names.
             rldot1qVlanStaticNameEntry 1.3.6.1.4.1.9.6.1.101.48.70.1 no-access
Staticly created by local or network management vlan list
                 rldot1qVlanStaticName 1.3.6.1.4.1.9.6.1.101.48.70.1.1 snmpadminstring read-write
An administratively assigned string,which may be used to identify the VLAN. The VLAN name must be unique or no name.
       rlPortVlanTriplePlayMulticastTvTable 1.3.6.1.4.1.9.6.1.101.48.71 no-access
A table saves a list of vlans per port/lag.
             rlPortVlanTriplePlayMulticastTvEntry 1.3.6.1.4.1.9.6.1.101.48.71.1 no-access
Entry of Triple Play Multicast Tv table.
                 rlPortVlanTriplePlayMulticastTvList1to1024 1.3.6.1.4.1.9.6.1.101.48.71.1.1 vlanlist1 read-write
A list of staticaly created Triple Play MTV vlans from 1 to 1024.
                 rlPortVlanTriplePlayMulticastTvList1025to2048 1.3.6.1.4.1.9.6.1.101.48.71.1.2 vlanlist2 read-write
A list of staticaly created Triple Play MTV vlans from 1025 to 2048.
                 rlPortVlanTriplePlayMulticastTvList2049to3072 1.3.6.1.4.1.9.6.1.101.48.71.1.3 vlanlist3 read-write
A list of staticaly created Triple Play MTV vlans from 2049 to 3072.
                 rlPortVlanTriplePlayMulticastTvList3073to4094 1.3.6.1.4.1.9.6.1.101.48.71.1.4 vlanlist4 read-write
A list of staticaly created Triple Play MTV vlans from 3073 to 4094.
       rldot1qVlanMembershipTypeTable 1.3.6.1.4.1.9.6.1.101.48.72 no-access
A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN.
             rldot1qVlanMembershipTypeEntry 1.3.6.1.4.1.9.6.1.101.48.72.1 no-access
Staticly or dynamicly created VLAN ID owner entry
                 rldot1qVlanMembershipTypeBitmap 1.3.6.1.4.1.9.6.1.101.48.72.1.1 integer read-only
This field contains a bitmap of owners that can creates and/or add a port to the VLAN. There exist three such type of owners : Default VLAN Manual created VLAN Dynamic(RAVA)created VLAN GVRP(MVRP)created VLAN