CISCO-WAN-RPM-CONN-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-WAN-RPM-CONN-EXT-MIB
Download as:   
SNMPv2-CONF, CISCO-WAN-ATM-CONN-MIB, SNMPv2-SMI, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoWanRpmConnExtMIB 1.3.6.1.4.1.351.150.9
This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Module (RPM).
     cwRpmConnExtMIBObjects 1.3.6.1.4.1.351.150.9.1
         cwRpmConnExt 1.3.6.1.4.1.351.150.9.1.1
             cwRpmChanExtTable 1.3.6.1.4.1.351.150.9.1.1.1 no-access
This table together with the 'cwAtmChanCnfgTable' support provisioning of PVC endpoints and SPVCs on an RPM. This table contains objects that are specific to RPM. This table is an augmentation to the 'cwAtmChanCnfgTable'.
                 cwRpmChanExtEntry 1.3.6.1.4.1.351.150.9.1.1.1.1 no-access
Each entry contains RPM specific parameters for a connection endpoint on an RPM.
                     cwrChanSubInterface 1.3.6.1.4.1.351.150.9.1.1.1.1.1 unsigned32 read-only
The RPM's backplane sub-interface for which this channel is configured. Sub-interface 0 means the switch port.
                     cwrChanVcd 1.3.6.1.4.1.351.150.9.1.1.1.1.2 unsigned32 read-only
Virtual Circuit Descriptor. A unique number which identifies a connection.
                     cwrChanAalEncapType 1.3.6.1.4.1.351.150.9.1.1.1.1.3 integer read-only
ATM adaptation layer (AAL) and Encapsulation type. aal5ciscoPPP - For Cisco PPP over ATM. 'cwrChanVirtualTemplate' is required to be set for this type. aal5muxAPOLLO - For a multiplex (MUX) - type virtual circuit using the Apollo protocol. aal5muxAPPLETALK - For a MUX-type virtual circuit using the AppleTalk protocol. aal5muxDECNET - For a MUX-type virtual circuit using the DECnet protocol. aal5muxIP - For a MUX-type virtual circuit using the IP protocol. aal5muxIPX - For a MUX-type virtual circuit using the IPX protocol. aal5muxPPP - For a MUX-type virtual circuit using the PPP protocol. 'cwrChanVirtualTemplate' is required to be set for this type. aal5muxVINES - For a MUX-type virtual circuit using the VINES protocol. aal5muxXNS - For a MUX-type virtual circuit using the XNS protocol. aal5nlpid - Allows ATM interfaces to interoperate with HSSI. aal5snap - The only encapsulation supported for Inverse ARP. Logical Link Control/ Subnetwork Access Protocol (LLC/SNAP) precedes the protocol datagram. ilmi - Used to set up communication with ILMI. qsaal - A signalling type PVC used for setting up or tearing down SVCs. Enumeration: 'aal5muxIP': 5, 'ilmi': 12, 'aal5snap': 11, 'aal5muxIPX': 6, 'aal5muxPPP': 7, 'qsaal': 13, 'aal5ciscoPPP': 1, 'aal5muxDECNET': 4, 'aal5muxVINES': 8, 'aal5muxXNS': 9, 'aal5muxAPPLETALK': 3, 'aal5nlpid': 10, 'aal5muxAPOLLO': 2.
                     cwrChanVirtualTemplate 1.3.6.1.4.1.351.150.9.1.1.1.1.4 unsigned32 read-only
This object identifies the virtual template. The non-zero value need to be specified for Cisco PPP or MUX-type PPP encapsulation (i.e. cwrChanAalEncapType = aal5ciscoPPP or aal5muxPPP). The value 0 signifies that Virtual Template is not applicable.
                     cwrChanInArpInterval 1.3.6.1.4.1.351.150.9.1.1.1.1.5 unsigned32 read-only
This specifies how often Inverse ARP datagrams will be sent on this channel. 0 will disable the InArp for this channel. This object is only supported for aal5snap encapsulation (i.e. cwrChanAalEncapType = aal5snap).
                     cwrChanOamLoopbkTxInterval 1.3.6.1.4.1.351.150.9.1.1.1.1.6 unsigned32 read-only
This specifies how often to generate an OAM F5 loopback cell from this channel. 0 will disable generation of OAM F5 loopback cells.
                     cwrChanOamManage 1.3.6.1.4.1.351.150.9.1.1.1.1.7 truthvalue read-only
This enables/disables OAM management for this channel. If set to true(1), OAM management is enabled.
                     cwrChanOamRetryUpCount 1.3.6.1.4.1.351.150.9.1.1.1.1.8 unsigned32 read-only
Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up. This object only applies if OAM management is enabled (i.e. cwrChanOAMManage = true).
                     cwrChanOamRetryDownCount 1.3.6.1.4.1.351.150.9.1.1.1.1.9 unsigned32 read-only
Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC connection state to down. This object only applies if OAM management is enabled (i.e. cwrChanOAMManage = true).
                     cwrChanOamRetryInterval 1.3.6.1.4.1.351.150.9.1.1.1.1.10 unsigned32 read-only
The frequency that end-to-end F5 OAM loopback cells are transmitted when a change in UP/DOWN state of a PVC is being verified. This object only applies if OAM management is enabled (i.e. cwrChanOAMManage = true).
     ciscoWanRpmConnExtMIBConformance 1.3.6.1.4.1.351.150.9.2
         ciscoWanRpmConnExtMIBCompliances 1.3.6.1.4.1.351.150.9.2.1
             ciscoWanRpmConnExtMIBCompliance 1.3.6.1.4.1.351.150.9.2.1.1
The compliance statement for the Cisco MGX RPM connection management group.
         ciscoWanRpmConnExtMIBGroups 1.3.6.1.4.1.351.150.9.2.2
             ciscoWanRpmConnExtMIBGroup 1.3.6.1.4.1.351.150.9.2.2.1
Objects related to ATM connection in RPM module.