CISCO-WAN-FR-SIGNALING-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-WAN-FR-SIGNALING-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
                     frPortCnfSigLMIGrp 1.3.6.1.4.1.351.110.5.1.1.1.2.1
                         frPortCnfSigLMIGrpTable 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1 no-access
This table is for configuration of singaling(LMI) on frame relay ports.
                             frPortCnfSigLMIGrpEntry 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1 no-access
An entry for each frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
                                 lmiCnfPortNum 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.1 integer32 read-only
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
                                 signallingProtocolType 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.2 integer read-write
The value of this object is used for configuring the LMI signaling protocol type. 1 - other. Not a valid value for SET request. 2 - noSignalling 3 - strataLMI 4 - annexAUNI 5 - annexDUNI 6 - annexANNI 7 - annexDNNI The ports with portType = frame-forward(3) can be set to noSingalling(2) only. The value strataLMI(3) is not supported for portHeaderLen = fourOctets(2). Enumeration: 'annexDNNI': 7, 'annexDUNI': 5, 'annexAUNI': 4, 'other': 1, 'noSignalling': 2, 'annexANNI': 6, 'strataLMI': 3.
                                 asynchronousUpdates 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.3 integer read-write
This object is used for configuring asynchronous updates. The possible values are : disable(1) : disable Asynchronous Status Updates & Unsolicited Full Status enable(2) : enable Asynchronous Status Updates fsenable(3) : enable Unsolicited Full Status updfsenable(4) : enable Asynchronous Status Updates & Unsolicited Full Status. Enumeration: 'enable': 2, 'disable': 1, 'fsenable': 3, 'updfsenable': 4.
                                 t391LinkIntegrityTimer 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.4 integer32 read-write
The value of this object identifies the desired User-side T391 link integrity verification polling timer value for this UNI/NNI logical port.
                                 t392PollingVerificationTimer 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.5 integer32 read-write
The value of this object identifies the desired Network-side T392 polling verification timer value (nT2 for LMI) for this UNI/NNI logical port. This is the length of time the network should wait between Status Inquiry Messages.
                                 n391FullStatusPollingCounter 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.6 integer32 read-write
The value of this object identifies the User-Side 391 full status polling cycle value for this UNI/NNI logical port.
                                 n392ErrorThreshold 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.7 integer32 read-write
The value of this object identifies the desired User-side/Network-side N392 error threshold value for this UNI/NNI logical port.
                                 n393MonitoredEventCount 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.8 integer32 read-write
The value of this object identifies the desired User-side/Network-side N393 monitored events count value for this UNI/NNI logical port.
                                 enhancedLmi 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.9 integer read-write
This object enables/disables the Enhanced LMI (ELMI) on the frame relay port. Enumeration: 'enable': 2, 'disable': 1.
                                 portFRF1Dot2Support 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.10 integer read-write
This object enables/disables the FRF 1.2 feature. This object is added for FRSM12. This object is not applicable to MGX Release 1.x Enumeration: 'enable': 1, 'disable': 2.
                                 portLmiSigConfMethod 1.3.6.1.4.1.351.110.5.1.1.1.2.1.1.1.11 integer read-write
This object enables/disables the port LMI signalling autosense. Setting this object to autosense(2) enables the port to autodetect and configure port LMI signalling type. signallingProtocolType mib should be set to noSignalling while this object is being set to autosense(2). If signallingProtocolType mib is set to a value other than noSignalling while this object is being set to autosense(2), the set request fails. When this object is set to manual(1), user needs to manually configure the port LMI signalling type using the signallingProtocolType mib. signallingProtocolType can be configured to any valid value including noSignalling when this object is set to manual(1). Enumeration: 'autosense': 2, 'manual': 1.
                     frPortCnfSigCLLMGrp 1.3.6.1.4.1.351.110.5.1.1.1.2.2
                         frPortCnfSigCLLMGrpTable 1.3.6.1.4.1.351.110.5.1.1.1.2.2.1 no-access
This table is configuring the CLLM on frame relay ports. This table is not applicable for Frame Forwarding ports.
                             frPortCnfSigCLLMGrpEntry 1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1 no-access
An entry for each frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
                                 cllmCnfPortNum 1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.1 integer32 read-only
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
                                 cllmEnable 1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.2 integer read-write
This object is used for enabling/disabling CLLM on frame relay port. When set to 'disabled', CLLM is disabled. When set to 'enabled', CLLM is enabled. Enumeration: 'enable': 2, 'disable': 1.
                                 xmtCLLMStatusTimer 1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.3 integer32 read-write
Interval in milliseconds for CLLM to send CLLM updates.
                                 rcvCLLMStatusTimer 1.3.6.1.4.1.351.110.5.1.1.1.2.2.1.1.4 integer read-only
Timeout value for receiving CLLM updates. Enumeration: 'rcvCLLMTimerValue': 1000.
                     frPortCntSigLMIGrp 1.3.6.1.4.1.351.110.5.1.1.2.2.1
                         frPortCntSigLMIGrpTable 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1 no-access
This table contains the LMI statistics of frame relay ports.
                             frPortCntSigLMIGrpEntry 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1 no-access
An entry for each frame relay port. Each entry identifies the LMI statistics supported on a frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
                                 lmiSigPortNum 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.1 integer32 read-only
The value of this object refers to the frame relay port. The value for this object must be same as the 'portNum' object defined in frPortCnfPortGrpTable. The frame forwarding port value is not valid for this object.
                                 rcvStatusInquiry 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.2 counter32 read-only
The number of Status Inquiry messages received.
                                 rcvInvalidRequest 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.3 counter32 read-only
The number of Invalid Request messages received.
                                 rcvUNISeqMismatch 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.4 counter32 read-only
The number of times UNI messages with sequence number mismatches were received.
                                 xmtStatus 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.5 counter32 read-only
The number of times Status response messages transmitted.
                                 xmtAsynchUpdate 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.6 counter32 read-only
The number of times Asynch Status messages transmitted.
                                 uniSignalingTimeout 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.7 counter32 read-only
The number of times UNI Status requests were not received.
                                 xmtStatusInquiry 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.8 counter32 read-only
The number of Status Inquiry messages transmitted.
                                 rcvStatus 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.9 counter32 read-only
The number of times Status response messages received.
                                 rcvAsynchUpdate 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.10 counter32 read-only
The number of times Asynch Status messages received
                                 rcvNNISeqMismatch 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.11 counter32 read-only
The number of times NNI messages with sequence number mismatches were received.
                                 nniSignalingTimeout 1.3.6.1.4.1.351.110.5.1.1.2.2.1.1.1.12 counter32 read-only
The number of times NNI Status requests were not received.
                     frPortCntSigCLLMGrp 1.3.6.1.4.1.351.110.5.1.1.2.2.2
                         frPortCntSigCLLMGrpTable 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1 no-access
This table is for CLLM statistics for frame relay ports.
                             frPortCntSigCLLMGrpEntry 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1 no-access
An entry for frame relay port. The entries are applicable only for following ports: portType = frame-relay(1), portType = frFUNI(2). This table is not applicable for Frame Forwarding ports,i.e portType = frame-forward(3).
                                 cllmSigPortNum 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.1 integer32 read-only
The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. The Frame Forwarding Port value is not valid for this object.
                                 rcvFramesCLLM 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.2 counter32 read-only
The number of CLLM frames received.
                                 rcvBytesCLLM 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.3 counter32 read-only
The number of CLLM bytes received.
                                 xmtFramesCLLM 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.4 counter32 read-only
The number of CLLM frames transmitted.
                                 xmtBytesCLLM 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.5 counter32 read-only
The number of CLLM bytes transmitted.
                                 cllmFailures 1.3.6.1.4.1.351.110.5.1.1.2.2.2.1.1.6 counter32 read-only
The number of times an expected CLLM message was not received.
 ciscoWanFrSignalingMIB 1.3.6.1.4.1.351.150.46
The MIB module to configure LMI and CLLM on a frame relay ports. This mib module also contains objects to represent LMI and CLLM statistics information. The frame relay logical port is referred to as 'frame relay port' in this mib. The 'logical port' refers to frame relay port. LMI : Local Management Interface. The Frame Relay LMI is a set of enhancements to the basic Frame Relay Specification. The Key Frame Relay LMI extensions include global addressing, virtual circuit status messages and multicasting. The LMI includes support for a keepalive mechanism, which verifies that data is flowing, and a status mechanism, which provides an on-going status report on the DLCIs known to the switch. The LMI Global Addressing extension gives Frame Relay DLCI values global rather than local significance. The global addressing extension adds functionality and manageability to Frame Relay internetworks. The LMI virtual circuit messages provide communication and synchronization between Frame Relay DTE and DCE devices. These messages are periodically report on the status of PVCs, which prevents data from being sent into black holes(that, over PVCs that no longer exist). LMI UNI signaling enables subscribers to find out about the PVC status of the network, thus inhibiting the use of an unavailable PVC and supplies procedures for detecting and modifying following events: * deletion of a PVC * addition of a PVC * availability of a configured PVC * unavailability of a configured PVC * error due to LMI message sequencing ELMI : Enhanced LMI ELMI allows the router to learn QoS(Quality of Service) parameters from the switch and use them for traffic shaping, configuration or management purposes. CLLM : Consolidated Link Layer Management. The CLLM is an out-of-band mechanism to transport congestion-related information to the far end. The CLLM enables the Frame Relay network to more efficiently relay congestion notifications to the DTE(router). The CLLM congestion notification is sent on the reserved data link connection identifier(DLCI) 1023. Frame Forwarding Port: Frame Forwarding Ports are identified by portType = frame-forward(3). The signaling parameters are not applicable to these ports.
       cwfSignalingMIBConformance 1.3.6.1.4.1.351.150.46.2
           cwfSignalingMIBGroups 1.3.6.1.4.1.351.150.46.2.1
               ciscoWanFrLmiConfigGroup 1.3.6.1.4.1.351.150.46.2.1.1
A collection of objects providing information applicable to Frame Relay Logical Ports (Frame Relay Ports).
               ciscoWanFrLmiStatsGroup 1.3.6.1.4.1.351.150.46.2.1.2
A collection of objects providing information applicable to LMI statistics on Frame Relay Ports.
               ciscoWanFrCllmGroup 1.3.6.1.4.1.351.150.46.2.1.3
A collection of objects providing information on CLLM applicable to Frame Relay Ports.
               ciscoWanFrCllmStatsGroup 1.3.6.1.4.1.351.150.46.2.1.4
A collection of objects providing information applicable to CLLMI statistics on Frame Relay Ports.
           cwfSignalingMIBCompliances 1.3.6.1.4.1.351.150.46.2.2
               cwfSignalingMIBCompliance 1.3.6.1.4.1.351.150.46.2.2.1
The compliance statement for SNMP entities which have network interfaces.