CISCO-WAN-BBIF-PORT-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-WAN-BBIF-PORT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
                 bbIfCnfPortGrp 1.3.6.1.4.1.351.110.5.2.6.1.1
                     bbIfCnfPortGrpTable 1.3.6.1.4.1.351.110.5.2.6.1.1.1 no-access
The Broadband Interface config table is for logical interface. There will an entry for each of the logical partition of the physical line.
                         bbIfCnfPortGrpEntry 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1 no-access
An entry for the logical interface. The interface may be further be configured to be used as a virtual trunk OR as a UNI Port.
                             bbIfNum 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.1 integer32 read-only
This is logical interface number within a physical line num. In MGX PXM1 card, a physical port can have a maximum of 32 logical interfaces.
                             bbIfRowStatus 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.2 integer read-write
This variable enables or disables the logical interface. 1 - enable 2 - disable 3 - modify Enumeration: 'add': 1, 'del': 2, 'mod': 3.
                             bbIfAdmin 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.3 integer read-write
This variable enables or disables the logical interface. 1 - up 2 - down 3 - writeOnly Enumeration: 'down': 2, 'writeOnly': 3, 'up': 1.
                             bbIfLineNum 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.4 integer32 read-write
The line number associated with the logical interface. For PXM1, there is currently 4 physical lines.
                             bbIfIngrPctBandwidth 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.5 integer32 read-write
The percentage of aggregate physical line bandwidth, available for this broadband interface - Ingress. Default is 0 %.
                             bbIfEgrPctBandwidth 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.6 integer32 read-write
The percentage of aggregate physical line bandwidth, available for this broadband interface - Egress . Default is 0 %.
                             bbIfMinVpi 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.7 integer32 read-write
The lower limit of VPI range to be reserved for this logical interface.
                             bbIfMaxVpi 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.8 integer32 read-write
The upper limit of VPI range to be reserved for this logical interface. For virtual trunks, bbIfMinVpi and bbIfMaxVpi should be the same.
                             bbIfSpeed 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.9 integer32 read-only
The speed of the port in cells per second.
                             bbIfMaxCellRatePct 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10 integer32 read-write
The maximum cell rate allowed for the port in terms of percentage. Must be greater than or equal to bbIfIngrPctBandwidth. The default is 100 percent.
                     nextBbIfNumAvailable 1.3.6.1.4.1.351.110.5.2.6.1.1.2 integer read-only
Indicates the next logical broadband interface number that is available.
                 bbIfStateGrpTable 1.3.6.1.4.1.351.110.5.2.6.3.1 no-access
The state table for the logical interface.
                     bbIfStateGrpEntry 1.3.6.1.4.1.351.110.5.2.6.3.1.1 no-access
An entry for each logical interface representing the state.
                         bbStateIfNum 1.3.6.1.4.1.351.110.5.2.6.3.1.1.1 integer read-only
This is logical interface number within a physical line num. In MGX PXM1 card, a physical port can have a maximum of 32 logical interfaces.
                         bbIfState 1.3.6.1.4.1.351.110.5.2.6.3.1.1.2 integer read-only
This variable indicates the status of the logical interface. The following values are not supported for the logical interface. remoteloopback (3), outofcelldelineation (6), localloopback (7). Enumeration: 'linefailure': 4, 'notConfigured': 1, 'lineinloopback': 7, 'inactive': 6, 'signallingfailure': 5, 'active': 2.
                         bbIfOversubscribed 1.3.6.1.4.1.351.110.5.2.6.3.1.1.3 integer read-only
This variable indicates the whether the logical interface is over subscribed or not. Enumeration: 'true': 2, 'false': 1.
                         bbIfIngrPercentUtil 1.3.6.1.4.1.351.110.5.2.6.3.1.1.4 integer read-only
Percentage Utilization of the interface in the Ingress direction.
                         bbIfEgrPercentUtil 1.3.6.1.4.1.351.110.5.2.6.3.1.1.5 integer read-only
Percentage Utilization of the interface in the Egress direction.
                 bbIfCntGrp 1.3.6.1.4.1.351.110.5.2.6.4.1
                     bbIfCntGrpTable 1.3.6.1.4.1.351.110.5.2.6.4.1.1 no-access
The Broadband Interface Count table is for logical interface. There will an entry for each of the logical partition of the physical line.
                         bbIfCntGrpEntry 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1 no-access
An entry for logical interface.
                             bbCntIfNum 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.1 integer read-only
Refers to the logical interface index.
                             bbIfTotalCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.2 counter32 read-only
Total number of cells (VC plus Qbin) that belong to this Interface. This maps on to the virtual interface of QE.
                             bbIfRcvValidOAMCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.3 counter32 read-only
Total number of OAM cell received.
                             bbIfRcvRmCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.4 counter32 read-only
Total number of RM cells Received.
                             bbIfRcvClp0Cells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.5 counter32 read-only
Total number of CLP-0 cells Received.
                             bbIfRcvClp1Cells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.6 counter32 read-only
Total number of CLP-1 cells Received.
                             bbIfRcvClp0DiscCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.7 counter32 read-only
Total number of CLP-0 cells discarded at Ingress.
                             bbIfRcvClp1DiscCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.8 counter32 read-only
Total number of CLP-1 cells discarded at Ingress.
                             bbIfXmtOAMCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.9 counter32 read-only
Total number of OAM cells transmitted.
                             bbIfXmtRmCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.10 counter32 read-only
Total number of RM cells transmitted.
                             bbIfXmtClp0Cells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.11 counter32 read-only
Total number of CLP-0 cells transmitted.
                             bbIfXmtClp1Cells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.12 counter32 read-only
Total number of CLP-1 cells transmitted.
                             bbIfCntClrButton 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.13 integer read-write
Writing a value of 2 resets all the counters. Enumeration: 'resetCounter32s': 2, 'noAction': 1.
                             bbIfRcvErroredCells 1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.14 counter32 read-only
Total number of cells with Invalid VPI VCI or Invalid PTI fields This is a card level counter and hence will be the same for all instances of the ports.
 ciscoWanBbifPortMIB 1.3.6.1.4.1.351.150.32
The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on ATM Logical port statistics.
       cwbPortMIBConformance 1.3.6.1.4.1.351.150.32.2
           cwbPortMIBGroups 1.3.6.1.4.1.351.150.32.2.1
               cwbPortGenearlGroup 1.3.6.1.4.1.351.150.32.2.1.1
The collection of objects which are applicable for general information about logical ports.
               cwbPortConfGroup 1.3.6.1.4.1.351.150.32.2.1.2
The collection of objects which are used for configuring ATM logical ports(known as broad band interface ports).
               cwbPortStateGroup 1.3.6.1.4.1.351.150.32.2.1.3
The collection of objects which are used for finding the state of ATM logical ports(known as broad band interface ports).
               cwbPortStatsGroup 1.3.6.1.4.1.351.150.32.2.1.4
The collection of objects containing the statistics information for ATM Logical ports.
           cwbPortMIBCompliances 1.3.6.1.4.1.351.150.32.2.2
               cwbPortCompliance 1.3.6.1.4.1.351.150.32.2.2.1
The compliance statement for objects related to SRM MIB.