CISCO-WAN-BBIF-ILMI-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-WAN-BBIF-ILMI-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, ATM-TC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
                 bbIfCnfSigILMIGrp 1.3.6.1.4.1.351.110.5.2.6.1.2
                     bbIfCnfSigILMIGrpTable 1.3.6.1.4.1.351.110.5.2.6.1.2.1 no-access
This table contains ILMI configuration parameters for a broadband interface.
                         bbIfCnfSigILMIGrpEntry 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1 no-access
An entry for a boradband interface used as a UNI port. Each entry contains ILMI configuration parameters and variables for a broadband interface.
                             bbIfSigPortNum 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1 integer32 read-only
This object refers to the broadband interface. The value for this object is same as value specified in bbIfNum object from bbIfCnfGrpTable.
                             bbIfIlmiEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2 integer read-write
The logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support. This variable is provided to enable/disable ILMI. ILMI should only be enabled on 'user ports' and not on 'virtual trunks' 1 - disable 2 - enable Enumeration: 'enable': 2, 'disable': 1.
                             bbIfSignallingProtocolType 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3 integer read-write
This will set the signalling protocol other(1) : other noSignalling(2) : noSignalling iLMI(3) : ILMI Enumeration: 'noSignalling': 2, 'other': 1, 'iLMI': 3.
                             bbIfSignallingVpi 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4 integer32 read-write
This object specifies the VPI on which signalling cells received.
                             bbIfSignallingVci 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5 integer32 read-write
This object specifies the VPI on which signalling cells received.
                             bbIfAddrPrefix 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6 atmilminetworkprefix read-write
Network Prefix for the ATM address.
                             bbIfCustomerId 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7 integer32 read-write
This represents the customer Id.
                             bbIfProtocolRevNo 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8 integer32 read-write
This object represents the protocol revision number.
                             bbIfIlmiTrapEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9 integer read-write
This object is used for enabling/disabling the sending of ILMI traps. Enumeration: 'enable': 2, 'disable': 1.
                             bbIfMinTrapInterval 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10 integer32 read-write
This object specifies the minimum throttling period of notification generation. The notificaton events should be suppressed by the agent until the current throttling period expires.
                             bbIfKeepAlivePollingEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11 integer read-write
Enable/disable Keep Alive Polling. Enumeration: 'enable': 2, 'disable': 1.
                             bbIfErrorThresholdN491 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12 integer32 read-write
This object specifies Error Threshold (N491) value. The number of keep alive polls that must fail within a window of N491 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
                             bbIfEventThresholdN492 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13 integer32 read-write
This object specifies Error Threshold (N492) value. The number of keep alive polls that must fail within a window of N492 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
                             bbIfPollingIntervalT491 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14 integer read-write
This object specifies Polling Interval (T491) value. The T491 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3). Enumeration: 'v12': 60, 'v10': 50, 'v11': 55, 'v1': 5, 'v2': 10, 'v3': 15, 'v4': 20, 'v5': 25, 'v6': 30, 'v7': 35, 'v8': 40, 'v9': 45.
                             bbIfMinEnquiryIntervalT493 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15 integer32 read-write
This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
                             bbIfAddrRegEnable 1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16 integer read-write
Enable/disable ILMI Address Registration. Enumeration: 'enable': 2, 'disable': 1.
                 bbIfCntSigILMIGrp 1.3.6.1.4.1.351.110.5.2.6.4.2
                     bbIfCntSigILMIGrpTable 1.3.6.1.4.1.351.110.5.2.6.4.2.1 no-access
This table contains statistics related to ILMI.
                         bbIfCntSigILMIGrpEntry 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1 no-access
An entry for a boradband interface used as a UNI port.
                             sigCntBbIfNum 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.1 integer32 read-only
This object refers to the broadband interface. The value for this object is same as value specified in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable.
                             bbIfSnmpPduReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.2 counter32 read-only
The number of snmp packets received on this logical interface.
                             bbIfGetRequestReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.3 counter32 read-only
The number of get request messages received.
                             bbIfGetNextRequestReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.4 counter32 read-only
The number of get-next messages received.
                             bbIfSetRequestReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.5 counter32 read-only
The number of set messages received.
                             bbIfTrapReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.6 counter32 read-only
The number of traps received.
                             bbIfGetResponseReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.7 counter32 read-only
The number of Keep Alive response messages received.
                             bbIfGetResponseTransmitted 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.8 counter32 read-only
The number of response messages transmitted.
                             bbIfGetRequestTransmitted 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.9 counter32 read-only
The number of Keep Alive get request messages transmitted.
                             bbIfTrapTransmitted 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.10 counter32 read-only
The number of trap messages transmitted.
                             bbIfInvalidPDUReceived 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.11 counter32 read-only
The number of invalid PDUs received.
                             bbIfAsn1ParseError 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.12 counter32 read-only
The number of parse errors on ASN.1.
                             bbIfNoSuchNameError 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.13 counter32 read-only
The number of errors for name not present.
                             bbIfTooBigError 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.14 counter32 read-only
The number of messages received with len > 484.
                             bbIfSigCntClrButton 1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.15 integer read-write
Writing a value of 2 resets all the counters from bbIfCntSigILMIGrpTable. Enumeration: 'resetCounters': 2, 'noAction': 1.
 ciscoWanBbifIlmiMIB 1.3.6.1.4.1.351.150.33
The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface referred to in this mib is for ATM logical ports.
       cwbIlmiMIBConformance 1.3.6.1.4.1.351.150.33.2
           cwbIlmiMIBGroups 1.3.6.1.4.1.351.150.33.2.1
               cwbIlmiConfGroup 1.3.6.1.4.1.351.150.33.2.1.1
The collection of objects which are used for configuring ILMI on broad band interface ports.
               cwbIlmiStatsGroup 1.3.6.1.4.1.351.150.33.2.1.2
The collection of objects containing the ILMI statistics on broad band interface ports.
           cwbIlmiMIBCompliances 1.3.6.1.4.1.351.150.33.2.2
               cwbIlmiCompliance 1.3.6.1.4.1.351.150.33.2.2.1
The compliance statement for objects related to SRM MIB.