CISCO-VOA-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO

Home	MIB: CISCO-VOA-MIB
Download as:		SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CISCO-OPTICAL-MONITOR-MIB, CISCO-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
ciscoVoaMIB	1.3.6.1.4.1.9.9.262			This MIB module defines objects to configure and manage the Variable Optical Attenuator (VOA) modules. VOA modules are typically used to attenuate channels added by a network element, in order to equalize the input power of each wavelength before the multiplexed signal consisting of all wavelengths is sent through an EDFA. There may be a separate VOA per channel, one VOA per band of wavelengths, or one VOA for the pass through wavelengths. VOA modules are also often used before terminating optical wavelengths at optical receivers, in order to avoid receiver saturation. The VOAs may be present on various modules within the network element, for example, on an Optical Add/Drop Multiplexer (OADM) module, on the same module as an optical transceiver, or on a separate module of its own.
cVoaMIBObjects	1.3.6.1.4.1.9.9.262.1
cVoaBaseGroup	1.3.6.1.4.1.9.9.262.1.1
cVoaTable	1.3.6.1.4.1.9.9.262.1.1.1		no-access	This table provides objects to configure and control the attenuation on VOAs.
cVoaEntry	1.3.6.1.4.1.9.9.262.1.1.1.1		no-access	An entry in the cVoaTable provides objects to configure and control the attenuation level of a VOA at an interface, for a given direction.
cVoaDirection	1.3.6.1.4.1.9.9.262.1.1.1.1.1	opticalifdirection	no-access	This is the second index into the cVoaTable and indicates the direction for which the attenuation level at this interface is being controlled, in this entry.
cVoaAttenuationControlMode	1.3.6.1.4.1.9.9.262.1.1.1.1.2	integer	read-write	This object is used to set the mode of controlling the attenuation level of a VOA at an interface. When the mode is set to 'manual', the attenuation level is configured manually, by setting the desired attenuation level in the cVoaAttenuation object. The cVoaDesiredPower object does not apply in this case. When the mode is set to 'automatic', the attenuation level is continuously adjusted to maintain a desired power level, after attenuation. The desired optical power level after attenuation is configured using the cVoaDesiredPower object. The cVoaAttenuation object cannot be configured in this case, but it indicates the attenuation level derived from the desired power level. The automatic mode of controlling attenuation should not be used when the monitored power level includes multiple wavelengths, since the power level monitor cannot distinguish between a decrease in power across all wavelengths, versus a loss of power of some but not all wavelengths. If some but not all wavelengths go down, this would cause the attenuation level to be automatically decreased, leading to an increase in the power level of the remaining wavelengths. Enumeration: 'automatic': 2, 'manual': 1.
cVoaAttenuation	1.3.6.1.4.1.9.9.262.1.1.1.1.3	opticalattenindb	read-write	This object indicates the attenuation level applied at the interface. When the cVoaAttenuationControlMode object is set to 'manual', the attenuation level may be specified by setting this object.
cVoaAttenuationLastChange	1.3.6.1.4.1.9.9.262.1.1.1.1.4	timestamp	read-only	This object indicates the value of sysUpTime at the last time the attenuation level was adjusted at this interface, in the given direction.
cVoaDesiredPower	1.3.6.1.4.1.9.9.262.1.1.1.1.5	opticalpowerindbm	read-write	This object indicates the desired optical power level, after attenuation, at the interface. This object applies only when the cVoaAttenuationControlMode object is set to 'automatic'. In this mode, the attenuation level is continuously adjusted to maintain the desired power level, after attenuation, as specified by this object.
cVoaMIBConformance	1.3.6.1.4.1.9.9.262.3
cVoaMIBCompliances	1.3.6.1.4.1.9.9.262.3.1
cVoaMIBCompliance	1.3.6.1.4.1.9.9.262.3.1.1			The compliance statement for platforms that provide configuration and control of VOA modules.
cVoaMIBGroups	1.3.6.1.4.1.9.9.262.3.2
cVoaMIBBaseGroup	1.3.6.1.4.1.9.9.262.3.2.1			A collection of mandatory managed objects that provide basic configuration and control of the VOA modules.