CISCO-VLAN-MEMBERSHIP-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-VLAN-MEMBERSHIP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CISCO-TC, CISCO-SMI, CISCO-VTP-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoVlanMembershipMIB 1.3.6.1.4.1.9.9.68
The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McCloghrie. The MIB provides information on VLAN Membership Policy Servers used by a device and VLAN membership assignments of non-trunk bridge ports of the device.
       ciscoVlanMembershipMIBObjects 1.3.6.1.4.1.9.9.68.1
           vmVmps 1.3.6.1.4.1.9.9.68.1.1
               vmVmpsVQPVersion 1.3.6.1.4.1.9.9.68.1.1.1 integer32 read-only
The VLAN Query Protocol (VQP) version supported on the device. VQP is the protocol used to query VLAN Membership Policy Server (VMPS) for VLAN membership assignments of dynamic VLAN ports. A VMPS provides VLAN membership policy assignments based on the content of the packets received on a port.
               vmVmpsRetries 1.3.6.1.4.1.9.9.68.1.1.2 integer read-write
The number of retries for VQP requests to a VMPS before using the next available VMPS.
               vmVmpsReconfirmInterval 1.3.6.1.4.1.9.9.68.1.1.3 integer read-write
The switch will reconfirm membership of addresses on each port with VMPS periodically. This object specifies the interval to perform reconfirmation. If the value is set to 0, the switch does not reconfirm membership with VMPS.
               vmVmpsReconfirm 1.3.6.1.4.1.9.9.68.1.1.4 integer read-write
Setting this object to execute(2) causes the switch to reconfirm membership of every dynamic port. Reading this object always return ready(1). Enumeration: 'ready': 1, 'execute': 2.
               vmVmpsReconfirmResult 1.3.6.1.4.1.9.9.68.1.1.5 integer read-only
This object returns the result of the last request that sets vmVmpsReconfirm to execute(2). The semantics of the possible results are as follows: other(1) - none of following inProgress(2) - reconfirm in progress success(3) - reconfirm completed successfully noResponse(4) - reconfirm failed because no VMPS responded noVmps(5) - No VMPS configured noDynamicPort(6) - No dynamic ports configured noHostConnected(7) - No hosts on dynamic ports Enumeration: 'noHostConnected': 7, 'success': 3, 'noDynamicPort': 6, 'noVmps': 5, 'inProgress': 2, 'other': 1, 'noResponse': 4.
               vmVmpsCurrent 1.3.6.1.4.1.9.9.68.1.1.6 ipaddress read-only
This is the IpAddress of the current VMPS used.
               vmVmpsTable 1.3.6.1.4.1.9.9.68.1.1.7 no-access
A table of VMPS to use. The device will use the the primary VMPS by default. If the device is unable to reach the primary server after vmVmpsRetries retries, it uses the first secondary server in the table until it runs out of secondary servers, in which case it will return to using the primary server. Entries in this table may be created and deleted via this MIB or the management console on a device.
                   vmVmpsEntry 1.3.6.1.4.1.9.9.68.1.1.7.1 no-access
An entry (conceptual row) in the vmVmpsTable.
                       vmVmpsIpAddress 1.3.6.1.4.1.9.9.68.1.1.7.1.1 ipaddress read-only
The Ip Address of the VMPS.
                       vmVmpsPrimary 1.3.6.1.4.1.9.9.68.1.1.7.1.2 truthvalue read-only
The status of the VMPS. Setting this value to true will make this VMPS the primary server and make the switch use this as the current server. Setting this entry to true causes other rows to transition to false. Attempting to write a value of false after creation will result in a return of bad value. Deleting an entry whose value is true will result in the first entry in the table being set to true.
                       vmVmpsRowStatus 1.3.6.1.4.1.9.9.68.1.1.7.1.3 rowstatus read-only
The status of this conceptual row.
           vmMembership 1.3.6.1.4.1.9.9.68.1.2
               vmMembershipSummaryTable 1.3.6.1.4.1.9.9.68.1.2.1 no-access
A summary of VLAN membership of non-trunk bridge ports. This is a convenience table for retrieving VLAN membership information. A row is created for a VLAN if: a) the VLAN exists, or b) a port is assigned to a non-existent VLAN. VLAN membership can only be modified via the vmMembershipTable.
                   vmMembershipSummaryEntry 1.3.6.1.4.1.9.9.68.1.2.1.1 no-access
An entry (conceptual row) in the vmMembershipSummaryTable.
                       vmMembershipSummaryVlanIndex 1.3.6.1.4.1.9.9.68.1.2.1.1.1 vlanindex no-access
The VLAN id of the VLAN.
                       vmMembershipSummaryMemberPorts 1.3.6.1.4.1.9.9.68.1.2.1.1.2 octet string read-only
The set of the device's member ports that belong to the VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493).
                       vmMembershipSummaryMember2kPorts 1.3.6.1.4.1.9.9.68.1.2.1.1.3 ciscoportlist read-only
The set of the device's member ports that belong to the VLAN. It has the VLAN membership information of up to 2048 ports with the port number from 1 to 2048. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493).
               vmMembershipTable 1.3.6.1.4.1.9.9.68.1.2.2 no-access
A table for configuring VLAN port membership. There is one row for each bridge port that is assigned to a static or dynamic access port. Trunk ports are not represented in this table. An entry may be created and deleted when ports are created or deleted via SNMP or the management console on a device.
                   vmMembershipEntry 1.3.6.1.4.1.9.9.68.1.2.2.1 no-access
An entry (conceptual row) in the vmMembershipTable.
                       vmVlanType 1.3.6.1.4.1.9.9.68.1.2.2.1.1 integer read-write
The type of VLAN membership assigned to this port. A port with static vlan membership is assigned to a single VLAN directly. A port with dynamic membership is assigned a single VLAN based on content of packets received on the port and via VQP queries to VMPS. A port with multiVlan membership may be assigned to one or more VLANs directly. A static or dynamic port membership is specified by the value of vmVlan. A multiVlan port membership is specified by the value of vmVlans. Enumeration: 'dynamic': 2, 'static': 1, 'multiVlan': 3.
                       vmVlan 1.3.6.1.4.1.9.9.68.1.2.2.1.2 integer read-write
The VLAN id of the VLAN the port is assigned to when vmVlanType is set to static or dynamic. This object is not instantiated if not applicable. The value may be 0 if the port is not assigned to a VLAN. If vmVlanType is static, the port is always assigned to a VLAN and the object may not be set to 0. If vmVlanType is dynamic the object's value is 0 if the port is currently not assigned to a VLAN. In addition, the object may be set to 0 only.
                       vmPortStatus 1.3.6.1.4.1.9.9.68.1.2.2.1.3 integer read-only
An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned, or a port is assigned to a VLAN that is currently not active. A status of active(2) indicates that the currently assigned VLAN is active. A status of shutdown(3) indicates that the port has been disabled as a result of VQP shutdown response. Enumeration: 'active': 2, 'inactive': 1, 'shutdown': 3.
                       vmVlans 1.3.6.1.4.1.9.9.68.1.2.2.1.4 octet string read-write
The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 1 through 8, the second octet specifying VLAN ids 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'.
                       vmVlans2k 1.3.6.1.4.1.9.9.68.1.2.2.1.5 octet string read-write
The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 1024 through 1031, the second octet specifying VLAN ids 1032 through 1039, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'.
                       vmVlans3k 1.3.6.1.4.1.9.9.68.1.2.2.1.6 octet string read-write
The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 2048 through 2055, the second octet specifying VLAN ids 2056 through 2063, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'.
                       vmVlans4k 1.3.6.1.4.1.9.9.68.1.2.2.1.7 octet string read-write
The VLAN(s) the port is assigned to when the port's vmVlanType is set to multiVlan. This object is not instantiated if not applicable. The port is always assigned to one or more VLANs and the object may not be set so that there are no vlans assigned. Each octet within the value of this object specifies a set of eight VLANs, with the first octet specifying VLAN id 3072 through 3079, the second octet specifying VLAN ids 3040 through 3047, etc. Within each octet, the most significant bit represents the lowest numbered VLAN id, and the least significant bit represents the highest numbered VLAN id. Thus, each VLAN of the port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is included in the set of VLANs; the VLAN is not included if its bit has a value of '0'.
               vmMembershipSummaryExtTable 1.3.6.1.4.1.9.9.68.1.2.3 no-access
A summary of VLAN membership of non-trunk bridge ports. This table is used for retrieving VLAN membership information for the device which supports dot1dBasePort with value greater than 2048. A row is created for a VLAN and a particular bridge port range, where at least one port in the range is assigned to this VLAN. VLAN membership can only be modified via the vmMembershipTable.
                   vmMembershipSummaryExtEntry 1.3.6.1.4.1.9.9.68.1.2.3.1 no-access
An entry (conceptual row) in the vmMembershipSummaryExtTable.
                       vmMembershipPortRangeIndex 1.3.6.1.4.1.9.9.68.1.2.3.1.1 ciscoportlistrange no-access
The bridge port range index of this row.
                       vmMembershipSummaryExtPorts 1.3.6.1.4.1.9.9.68.1.2.3.1.2 ciscoportlist read-only
The set of the device's member ports that belong to the VLAN. It has the VLAN membership information of up to 2k ports with the port number starting from the information indicated in vmMembershipPortRangeIndex object of the same row. For example, if the value of vmMembershipPortRangeIndex is 'twoKto4K', the port number indicated in this object starting from 2049 and ending to 4096. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493).
               vmVlanCreationMode 1.3.6.1.4.1.9.9.68.1.2.4 integer read-write
This object is used to determine whether or not a non-existing VLAN will be created automatically by the system after assigned to a port. automatic(1): a non-existing VLAN will be created automatically by the system after assigned to a port. manual(2): a non-existing VLAN will not be created automatically by the system and need to be manually created by the users after assigned to a port. Enumeration: 'manual': 2, 'automatic': 1.
           vmStatistics 1.3.6.1.4.1.9.9.68.1.3
               vmVQPQueries 1.3.6.1.4.1.9.9.68.1.3.1 counter32 read-only
The total number of VQP requests sent by this device to all VMPS since last system re-initialization.
               vmVQPResponses 1.3.6.1.4.1.9.9.68.1.3.2 counter32 read-only
The number of VQP responses received by this device from all VMPS since last system re-initialization.
               vmVmpsChanges 1.3.6.1.4.1.9.9.68.1.3.3 counter32 read-only
The number of times, since last system re-initialization, the current VMPS was changed. The current VMPS is changed whenever the VMPS fails to response after vmVmpsRetries of a VQP request.
               vmVQPShutdown 1.3.6.1.4.1.9.9.68.1.3.4 counter32 read-only
The number of times, since last system re-initialization, a VQP response indicates 'shutdown'. A 'shutdown' response is a result of the membership policy configured at a VMPS by the administrator.
               vmVQPDenied 1.3.6.1.4.1.9.9.68.1.3.5 counter32 read-only
The number of times, since last system re-initialization, a VQP response indicates 'denied'. A 'denied' response is a result of the membership policy configured at a VMPS by the administrator.
               vmVQPWrongDomain 1.3.6.1.4.1.9.9.68.1.3.6 counter32 read-only
The number of times, since last system re-initialization, a VQP response indicates wrong management domain. A wrong management domain response indicates that the VMPS used serves a management domain that is different from the device's management domain.
               vmVQPWrongVersion 1.3.6.1.4.1.9.9.68.1.3.7 counter32 read-only
The number of times, since last system re-initialization, a VQP response indicates wrong VQP version. A wrong VQP version response indicates that the VMPS used supports a VQP version that is different from the device's VQP version.
               vmInsufficientResources 1.3.6.1.4.1.9.9.68.1.3.8 counter32 read-only
The number of times, since last system re-initialization, a VQP response indicates insufficient resources. An insufficient resources response indicates that the VMPS used does not have the required resources to verify the membership assignment requested.
           vmStatus 1.3.6.1.4.1.9.9.68.1.4
               vmNotificationsEnabled 1.3.6.1.4.1.9.9.68.1.4.1 truthvalue read-write
An indication of whether the notifications/traps defined in this MIB are enabled.
           vmVoiceVlan 1.3.6.1.4.1.9.9.68.1.5
               vmVoiceVlanTable 1.3.6.1.4.1.9.9.68.1.5.1 no-access
A table for configuring the Voice VLAN-ID for the ports. An entry will exist for each interface which supports Voice Vlan feature.
                   vmVoiceVlanEntry 1.3.6.1.4.1.9.9.68.1.5.1.1 no-access
An entry (conceptual row) in the vmVoiceVlanTable. Only interfaces which support Voice Vlan feature are shown.
                       vmVoiceVlanId 1.3.6.1.4.1.9.9.68.1.5.1.1.1 integer read-write
The Voice Vlan ID (VVID) to which this port belongs to. 0 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 0. VoIP and related packets are expected to be sent and received with VLAN-id=0 and an 802.1p priority. 1..4094 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with N. VoIP and related packets are expected to be sent and received with VLAN-id=N and an 802.1p priority. 4095 - The CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 4095. VoIP and related packets are expected to be sent and received untagged without an 802.1p priority. 4096 - The CDP packets transmitting through this port would not include Appliance VLAN-ID TLV; or, if the VVID is not supported on the port, this MIB object will not be configurable and will return 4096.
                       vmVoiceVlanCdpVerifyEnable 1.3.6.1.4.1.9.9.68.1.5.1.1.2 truthvalue read-write
Enable or Disable the feature of CDP message verification of voice VLANs. true - The voice VLAN vmVoiceVlan is enabled only after CDP messages are received from the IP phone. false - The voice VLAN vmVoiceVlan is enabled as soon as the IP phone interface is up. There is no verification needed from CDP messages from the IP phone.
       vmNotifications 1.3.6.1.4.1.9.9.68.2
           vmNotificationsPrefix 1.3.6.1.4.1.9.9.68.2.0
               vmVmpsChange 1.3.6.1.4.1.9.9.68.2.0.1
A VMPS change notification is generated whenever vmVmpsChanges is incremented. The IP address of the new VMPS is sent.
       vmMIBConformance 1.3.6.1.4.1.9.9.68.3
           vmMIBCompliances 1.3.6.1.4.1.9.9.68.3.1
               vmMIBCompliance 1.3.6.1.4.1.9.9.68.3.1.1
The compliance statement for entities which implement the VLANs.
               vmMIBCompliance2 1.3.6.1.4.1.9.9.68.3.1.2
The compliance statement for entities which implement the VLANs.
               vmMIBCompliance3 1.3.6.1.4.1.9.9.68.3.1.3
The compliance statement for entities which implement the VLANs.
               vmMIBCompliance4 1.3.6.1.4.1.9.9.68.3.1.4
The compliance statement for entities which implement the VLANs.
               vmMIBCompliance5 1.3.6.1.4.1.9.9.68.3.1.5
The compliance statement for entities which implement the VLANs.
               vmMIBCompliance6 1.3.6.1.4.1.9.9.68.3.1.6
The compliance statement for entities which implement the VLANs.
               vmMIBCompliance7 1.3.6.1.4.1.9.9.68.3.1.7
The compliance statement for entities which implement the VLANs.
           vmMIBGroups 1.3.6.1.4.1.9.9.68.3.2
               vmMembershipGroup 1.3.6.1.4.1.9.9.68.3.2.1
A collection of objects for displaying and configuring VLAN membership.
               vmVQPClientGroup 1.3.6.1.4.1.9.9.68.3.2.2
A collection of objects for the managing a VQP client.
               vmVQPNotificationsGroup 1.3.6.1.4.1.9.9.68.3.2.3
The notification group for a VQP client.
               vmStatusGroup 1.3.6.1.4.1.9.9.68.3.2.4
A collection of objects for conveying general status information.
               vmMembershipGroup2 1.3.6.1.4.1.9.9.68.3.2.5
A collection of objects for displaying and configuring VLAN membership.
               vm4kVlanGroup 1.3.6.1.4.1.9.9.68.3.2.6
A collection of objects providing multiVlan information for VLANS with VlanIndex from 1024 to 4095 which are assigned to one port.
               vmVoiceVlanGroup 1.3.6.1.4.1.9.9.68.3.2.7
A collection of objects providing information of Voice Vlan feature.
               vm1kVlanGroup 1.3.6.1.4.1.9.9.68.3.2.8
A collection of objects providing multiVlan information for VLANS with VlanIndex from 0 to 1023 which are assigned to one port.
               vmMembershipGroup3 1.3.6.1.4.1.9.9.68.3.2.9
A collection of objects for displaying and configuring VLAN membership.
               vmVoiceVlanExtGroup 1.3.6.1.4.1.9.9.68.3.2.10
A collection of objects providing the information of CDP verification of Voice Vlan feature.
               vmMembershipExtGroup 1.3.6.1.4.1.9.9.68.3.2.11
A collection of objects providing information for VLAN membership with bridge port ID greater than 2048.
               vmVlanCreationGroup 1.3.6.1.4.1.9.9.68.3.2.12
A collection of objects for the configuration on VLAN creation mode when assigning a non-existing VLAN to a port.