CISCO-VISM-HDLC-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-VISM-HDLC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
         vismSigGrp 1.3.6.1.4.1.351.110.5.5.6
             vismHdlcChanTable 1.3.6.1.4.1.351.110.5.5.6.1 no-access
This table is used for maintaining the statistics info for the HDLC channels on VISM. It also keeps track of some configurable parameters required for proper operation of HDLC driver in VISM.
                 vismHdlcChanEntry 1.3.6.1.4.1.351.110.5.5.6.1.1 no-access
An entry for each HDLC channel.
                     vismHdlcChanNum 1.3.6.1.4.1.351.110.5.5.6.1.1.1 integer32 read-only
This object is the index of this table. It refers to the ds0IfIndex in the dsx0VismCnfTable (defined in CISCO-VISM-DSX0-MIB MIB).
                     vismHdlcRowStatus 1.3.6.1.4.1.351.110.5.5.6.1.1.2 rowstatus read-only
This variable allows to add, delete or modify the entry. 'createAndGo': Use this to add an entry in this table. There are two case of creating a entry: 1) a CCS (Common Channel Signaling) channel is explicitly created for AAL2 Trunking. In this case, if the DS0 already created for PRI(Primary Rate Interface) or GR-303 the request of creation should be rejected. 2) A HDLC entry will be implicitly created before creating a LAPD(D channel Data Link) entry. In this case if the DS0 is already used for AAL2 trunking the request should be rejected. No entry in LAPD shall be created. 'active': This values is returned, once the row is created 'destroy': Use this to delete an entry from this table. According to the creation, an entry can be explicitly destroyed or implicitly removed.
                     vismHdlcMaxFrameSize 1.3.6.1.4.1.351.110.5.5.6.1.1.3 integer32 read-only
This object describes the maximum frame size that is allowed on this HDLC channel. This value is not configurable. The value for this object is 264.
                     vismHdlcLcnNum 1.3.6.1.4.1.351.110.5.5.6.1.1.4 integer32 read-only
This object describes LCN(Logical Channel Number) or the PVC(Permanent Virtual Circuit) channel number with which the HDLC channel is associated with. It is applicable only for trunking applications where the CCS frames are transmitted to the other end point over an AAL5 PVC. For PRI or GR-303 applications, this is not applicable since the CCS frames in that case are backhauled to the call agent.
                     vismHdlcXmtFrames 1.3.6.1.4.1.351.110.5.5.6.1.1.5 counter32 read-only
This object maintains the count of HDLC frames transmitted to the HDLC channel on VISM.
                     vismHdlcRcvFrames 1.3.6.1.4.1.351.110.5.5.6.1.1.6 counter32 read-only
This object maintains the count of HDLC frames received from the HDLC channel on VISM.
                     vismHdlcRcvCrcErrors 1.3.6.1.4.1.351.110.5.5.6.1.1.7 counter32 read-only
This object describes the count of HDLC frames dropped due to CRC(Cyclic Redundancy Check) errors in the frames received from the HDLC channel.
                     vismHdlcRcvBufOverflows 1.3.6.1.4.1.351.110.5.5.6.1.1.8 counter32 read-only
This object describes the count of HDLC receiver buffer overflow condition. This can occur if the rate of arrival of HDLC frames from the line is more than the processing rate by the CPU.
                     vismHdlcTxUnderflows 1.3.6.1.4.1.351.110.5.5.6.1.1.9 counter32 read-only
This object describes the count of HDLC Tx underflow condition.
                     vismHdlcTxAbortFrames 1.3.6.1.4.1.351.110.5.5.6.1.1.10 counter32 read-only
This object describes the count of HDLC Abort frames transmitted.
                     vismHdlcRxAbortFrames 1.3.6.1.4.1.351.110.5.5.6.1.1.11 counter32 read-only
This object describes the count of HDLC Abort frames received.
 ciscoVismHdlcMIB 1.3.6.1.4.1.351.150.91
The MIB module containing table for configurating and maintaining counters for the HDLC channel on VISM service module.
       ciscoVismHdlcMIBConformance 1.3.6.1.4.1.351.150.91.2
           ciscoVismHdlcMIBGroups 1.3.6.1.4.1.351.150.91.2.1
               ciscoVismHdlcGroup 1.3.6.1.4.1.351.150.91.2.1.1
The collection of objects which are used to represent VISM HDLC module.
               ciscoVismHdlcDeprecateGroup 1.3.6.1.4.1.351.150.91.2.1.2
The collection of objects that were supported earlier but deprecated now.
           ciscoVismHdlcMIBCompliances 1.3.6.1.4.1.351.150.91.2.2
               ciscoVismHdlcCompliance 1.3.6.1.4.1.351.150.91.2.2.1
The compliance statement for objects related to VISM HDLC module.