CISCO-SYSLOG-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-SYSLOG-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoSyslogMIB 1.3.6.1.4.1.9.9.41
The MIB module to describe and store the system messages generated by the IOS and any other OS which supports syslogs.
       ciscoSyslogMIBObjects 1.3.6.1.4.1.9.9.41.1
           clogBasic 1.3.6.1.4.1.9.9.41.1.1
               clogNotificationsSent 1.3.6.1.4.1.9.9.41.1.1.1 counter32 read-only
The number of clogMessageGenerated notifications that have been sent. This number may include notifications that were prevented from being transmitted due to reasons such as resource limitations and/or non-connectivity. If one is receiving notifications, one can periodically poll this object to determine if any notifications were missed. If so, a poll of the clogHistoryTable might be appropriate.
               clogNotificationsEnabled 1.3.6.1.4.1.9.9.41.1.1.2 truthvalue read-write
Indicates whether clogMessageGenerated notifications will or will not be sent when a syslog message is generated by the device. Disabling notifications does not prevent syslog messages from being added to the clogHistoryTable.
               clogMaxSeverity 1.3.6.1.4.1.9.9.41.1.1.3 syslogseverity read-write
Indicates which syslog severity levels will be processed. Any syslog message with a severity value greater than this value will be ignored by the agent. note: severity numeric values increase as their severity decreases, e.g. 'error' is more severe than 'debug'.
               clogMsgIgnores 1.3.6.1.4.1.9.9.41.1.1.4 counter32 read-only
The number of syslog messages which were ignored. A message will be ignored if it has a severity value greater than clogMaxSeverity.
               clogMsgDrops 1.3.6.1.4.1.9.9.41.1.1.5 counter32 read-only
The number of syslog messages which could not be processed due to lack of system resources. Most likely this will occur at the same time that syslog messages are generated to indicate this lack of resources. Increases in this object's value may serve as an indication that system resource levels should be examined via other mib objects. A message that is dropped will not appear in the history table and no notification will be sent for this message.
               clogOriginIDType 1.3.6.1.4.1.9.9.41.1.1.6 integer read-write
This object identifies the type of value that will be contained in clogOriginID object. The possible value(s) are: 'none' : do not send origin identifier in syslog messages. 'other' : type that is not identified by other values specified in this object. 'hostName' : Send hostname of the system in syslog messages. 'ipv4Address': Send IP address of the sending interface. 'contextName': Send context name of the security device. 'userDefined': Send user configured string in syslog message. The value 'other' and 'none' can not be set but can only be read. Enumeration: 'ipv4Address': 4, 'none': 1, 'contextName': 5, 'userDefined': 6, 'hostName': 3, 'other': 2.
               clogOriginID 1.3.6.1.4.1.9.9.41.1.1.7 snmpadminstring read-write
This object is used for configuring the origin identifier for the syslog messages. The origin identifier is useful for identifying the source of system logging messages in cases syslog messages from multiple devices are sent to a single syslog host. The origin identifier is added to the beginning of all system logging (syslog) messages sent to remote hosts. The type of the identifier is specified by clogOriginIDType object. This object can be written by the SNMP manager only when clogOriginIDType is set to 'userDefined'. For following value(s) of clogOriginIDType, this object can not be set; the value of this object is derived by the system in these cases: 'contextName' 'ipv4Address' 'hostName' 'other' 'none' This object contains the context name of the device, when clogOriginIDType is set to 'contextName'. This object contains IPv4 address (in dotted decimal notation) of the sending interface when clogOriginIDType is set to 'ipv4Address'. This object contains hostname of the system when clogOriginIDType is set to 'hostName'. This object will contain zero length octet string when clogOriginIDType is either 'none' or 'other'.
           clogHistory 1.3.6.1.4.1.9.9.41.1.2
               clogHistTableMaxLength 1.3.6.1.4.1.9.9.41.1.2.1 integer32 read-write
The upper limit on the number of entries that the clogHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and a new one will be created.
               clogHistMsgsFlushed 1.3.6.1.4.1.9.9.41.1.2.2 counter32 read-only
The number of entries that have been removed from the clogHistoryTable in order to make room for new entries. This object can be utilized to determine whether your polling frequency on the history table is fast enough and/or the size of your history table is large enough such that you are not missing messages.
               clogHistoryTable 1.3.6.1.4.1.9.9.41.1.2.3 no-access
A table of syslog messages generated by this device. All 'interesting' syslog messages (i.e. severity <= clogMaxSeverity) are entered into this table.
                   clogHistoryEntry 1.3.6.1.4.1.9.9.41.1.2.3.1 no-access
A syslog message that was previously generated by this device. Each entry is indexed by a message index.
                       clogHistIndex 1.3.6.1.4.1.9.9.41.1.2.3.1.1 integer32 no-access
A monotonically increasing integer for the sole purpose of indexing messages. When it reaches the maximum value the agent flushes the table and wraps the value back to 1.
                       clogHistFacility 1.3.6.1.4.1.9.9.41.1.2.3.1.2 displaystring read-only
Name of the facility that generated this message. For example: 'SYS'.
                       clogHistSeverity 1.3.6.1.4.1.9.9.41.1.2.3.1.3 syslogseverity read-only
The severity of the message.
                       clogHistMsgName 1.3.6.1.4.1.9.9.41.1.2.3.1.4 displaystring read-only
A textual identification for the message type. A facility name in conjunction with a message name uniquely identifies a message type.
                       clogHistMsgText 1.3.6.1.4.1.9.9.41.1.2.3.1.5 displaystring read-only
The text of the message. If the text of the message exceeds 255 bytes, the message will be truncated to 254 bytes and a '*' character will be appended - indicating that the message has been truncated.
                       clogHistTimestamp 1.3.6.1.4.1.9.9.41.1.2.3.1.6 timestamp read-only
The value of sysUpTime when this message was generated.
           clogServer 1.3.6.1.4.1.9.9.41.1.3
               clogMaxServers 1.3.6.1.4.1.9.9.41.1.3.1 unsigned32 read-only
The maximum number of syslog servers that can be configured for the system in clogServerConfigTable. A value of zero for this object indicates there is no specified limit for the system and is only dictated by system resources.
               clogServerConfigTable 1.3.6.1.4.1.9.9.41.1.3.2 no-access
This table contains entries that allow application to configure syslog servers for the system. The maximum number of entries that can be created for this table is limited by the object clogMaxServers.
                   clogServerConfigEntry 1.3.6.1.4.1.9.9.41.1.3.2.1 no-access
An entry containing information about syslog servers configured for the system.
                       clogServerAddrType 1.3.6.1.4.1.9.9.41.1.3.2.1.1 inetaddresstype no-access
The type of Internet address of this syslog server.
                       clogServerAddr 1.3.6.1.4.1.9.9.41.1.3.2.1.2 inetaddress no-access
The Internet address of this syslog server. The type of this address is determined by the value of the clogServerAddrType object.
                       clogServerStatus 1.3.6.1.4.1.9.9.41.1.3.2.1.3 rowstatus read-only
The status object used to manage rows in this table. A row may only be created by setting this object to 'createAndGo'. A row may only be deleted by setting this object to 'destroy'.
       ciscoSyslogMIBNotificationPrefix 1.3.6.1.4.1.9.9.41.2
           ciscoSyslogMIBNotifications 1.3.6.1.4.1.9.9.41.2.0
               clogMessageGenerated 1.3.6.1.4.1.9.9.41.2.0.1
When a syslog message is generated by the device a clogMessageGenerated notification is sent. The sending of these notifications can be enabled/disabled via the clogNotificationsEnabled object.
       ciscoSyslogMIBConformance 1.3.6.1.4.1.9.9.41.3
           ciscoSyslogMIBCompliances 1.3.6.1.4.1.9.9.41.3.1
               ciscoSyslogMIBCompliance 1.3.6.1.4.1.9.9.41.3.1.1
The compliance statement for entities which implement the Cisco syslog MIB.
               ciscoSyslogMIBComplianceRev1 1.3.6.1.4.1.9.9.41.3.1.2
The compliance statement for entities which implement the Cisco syslog MIB.
           ciscoSyslogMIBGroups 1.3.6.1.4.1.9.9.41.3.2
               ciscoSyslogMIBGroup 1.3.6.1.4.1.9.9.41.3.2.1
A collection of objects providing the syslog MIB capability.
               clogNotificationsGroup 1.3.6.1.4.1.9.9.41.3.2.2
A collection of notification(s) for syslog feature.
               clogServerGroup 1.3.6.1.4.1.9.9.41.3.2.3
A collection of objects providing syslog server information for the system.
               clogOriginIDGroup 1.3.6.1.4.1.9.9.41.3.2.4
A collection of objects providing information on origin of syslog messages.