CISCO-PROP-ATM-IF-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-PROP-ATM-IF-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoPropAtmIfMIB 1.3.6.1.4.1.9.9.319
This MIB is designed for Propietary ATM (propAtm) interfaces. The propAtm interfaces are identified in the ifTable entries with ifType 197 (as defined in IANAifType-MIB). This interface is a switch virtual interface which does not have any physical connector(jack).
         ciscoPropAtmIfMIBNotifs 1.3.6.1.4.1.9.9.319.0
         ciscoPropAtmIfMIBObjects 1.3.6.1.4.1.9.9.319.1
             cpAtmIfConfig 1.3.6.1.4.1.9.9.319.1.1
                 cpAtmIfConfigTable 1.3.6.1.4.1.9.9.319.1.1.1 no-access
This table is used to configure propAtm interfaces. Each entry in this table has a corresponding ifTable entry with ifType propAtm(197). The ifIndex value of that associated ifTable entry is used to index this this table. The entry of this table is added after its associated ifEntry is added in the ifTable of IF-MIB. It is impossible to add/delete entry to/from this table.
                     cpAtmIfConfigEntry 1.3.6.1.4.1.9.9.319.1.1.1.1 no-access
An entry in the cpAtmIfConfigTable table for each propAtm port interface. .
                         cpAtmIfMaxBandwidth 1.3.6.1.4.1.9.9.319.1.1.1.1.1 unsigned32 read-write
The propATM interface's maximum cell rate.
             cpAtmIfVirtualPortStats 1.3.6.1.4.1.9.9.319.1.2
                 cpAtmIfStatsEgressTable 1.3.6.1.4.1.9.9.319.1.2.1 no-access
This table reflects real-time statistics associated with each of propAtm interfaces on the egress side. Ingress terminology is used for the cells that are generated by the voice gateway on the TDM side and are going toward the ATM switch. Egress terminology means the cells that are coming from the ATM switch into the TDM side. This table contains statistics from this egress point of view.
                     cpAtmIfStatsEgressEntry 1.3.6.1.4.1.9.9.319.1.2.1.1 no-access
An entry in the cpAtmIfStatsEgressTable table for each propAtm port interface. CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1.
                         cpAtmIfEgrRcvClp0Cells 1.3.6.1.4.1.9.9.319.1.2.1.1.1 counter32 read-only
The number of CLP-0 cells received from switch at the traffic management and policing device.
                         cpAtmIfEgrRcvClp1Cells 1.3.6.1.4.1.9.9.319.1.2.1.1.2 counter32 read-only
The number of CLP-1 cells received from switch at the traffic management and policing device.
                         cpAtmIfEgrClp0DiscCells 1.3.6.1.4.1.9.9.319.1.2.1.1.3 counter32 read-only
The number of CLP-0 cells discarded due to policing.
                         cpAtmIfEgrClp1DiscCells 1.3.6.1.4.1.9.9.319.1.2.1.1.4 counter32 read-only
The number of CLP-1 cells discarded due to policing.
                         cpAtmIfEgrRcvOAMCells 1.3.6.1.4.1.9.9.319.1.2.1.1.5 counter32 read-only
The number of OAM cells received from the switch at the traffic management and policing device.
                         cpAtmIfEgrRcvEFCICells 1.3.6.1.4.1.9.9.319.1.2.1.1.6 counter32 read-only
The number of EFCI cells received from the switch at traffic management and policing device.
                         cpAtmIfHCEgrRcvClp0Cells 1.3.6.1.4.1.9.9.319.1.2.1.1.7 counter64 read-only
The number of CLP-0 cells received from switch at the traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvClp0Cells.
                         cpAtmIfHCEgrRcvClp1Cells 1.3.6.1.4.1.9.9.319.1.2.1.1.8 counter64 read-only
The number of CLP-1 cells received from switch at the traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvClp1Cells.
                         cpAtmIfHCEgrClp0DiscCells 1.3.6.1.4.1.9.9.319.1.2.1.1.9 counter64 read-only
The number of CLP-0 cells discarded due to policing. This object is a 64-bit version of cpAtmIfEgrClp0DiscCells.
                         cpAtmIfHCEgrClp1DiscCells 1.3.6.1.4.1.9.9.319.1.2.1.1.10 counter64 read-only
The number of CLP-1 cells discarded due to policing. This object is a 64-bit version of cpAtmIfEgrClp1DiscCells.
                         cpAtmIfHCEgrRcvOAMCells 1.3.6.1.4.1.9.9.319.1.2.1.1.11 counter64 read-only
The number of OAM cells received from the switch at the traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvOAMCells.
                         cpAtmIfHCEgrRcvEFCICells 1.3.6.1.4.1.9.9.319.1.2.1.1.12 counter64 read-only
The number of EFCI cells received from the switch at traffic management and policing device. This object is a 64-bit version of cpAtmIfEgrRcvEFCICells.
                 cpAtmIfEgressIntervalTable 1.3.6.1.4.1.9.9.319.1.2.2 no-access
This table reflects interval(each 15 minute) statistics associated witheach of the propAtm interfaces on egress side.
                     cpAtmIfEgressIntervalEntry 1.3.6.1.4.1.9.9.319.1.2.2.1 no-access
An entry in the cpAtmIfEgressIntervalTable table for each propAtm port interface. CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1.
                         cpAtmIfEgressIntervalNumber 1.3.6.1.4.1.9.9.319.1.2.2.1.1 integer32 no-access
Index of the table which represents the interval number. An interval number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours an 45 minutes prior to interval 1.
                         cpAtmIfIntEgrRcvClp0Cells 1.3.6.1.4.1.9.9.319.1.2.2.1.2 counter32 read-only
The number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval.
                         cpAtmIfIntEgrRcvClp1Cells 1.3.6.1.4.1.9.9.319.1.2.2.1.3 counter32 read-only
The number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval.
                         cpAtmIfIntEgrClp0DiscCells 1.3.6.1.4.1.9.9.319.1.2.2.1.4 counter32 read-only
The number of CLP-0 cells discarded due to policing during a 15 minute interval.
                         cpAtmIfIntEgrClp1DiscCells 1.3.6.1.4.1.9.9.319.1.2.2.1.5 counter32 read-only
The number of CLP-1 cells discarded due to policing during a 15 minute interval.
                         cpAtmIfIntEgrRcvOAMCells 1.3.6.1.4.1.9.9.319.1.2.2.1.6 counter32 read-only
The number of OAM cells received from the switch at the traffic management and policing device during a 15 minute interval.
                         cpAtmIfIntEgrRcvEFCICells 1.3.6.1.4.1.9.9.319.1.2.2.1.7 counter32 read-only
The number of EFCI cells received from the switch at traffic management and policing device during a 15 minute interval.
                         cpAtmIfHCIntEgrRcvClp0Cells 1.3.6.1.4.1.9.9.319.1.2.2.1.8 counter64 read-only
The number of CLP-0 cells received from switch at the traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvClp0Cells.
                         cpAtmIfHCIntEgrRcvClp1Cells 1.3.6.1.4.1.9.9.319.1.2.2.1.9 counter64 read-only
The number of CLP-1 cells received from switch at the traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvClp1Cells.
                         cpAtmIfHCIntEgrClp0DiscCells 1.3.6.1.4.1.9.9.319.1.2.2.1.10 counter64 read-only
The number of CLP-0 cells discarded due to policing during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrClp0DiscCells.
                         cpAtmIfHCIntEgrClp1DiscCells 1.3.6.1.4.1.9.9.319.1.2.2.1.11 counter64 read-only
The number of CLP-1 cells discarded due to policing during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrClp1DiscCells.
                         cpAtmIfHCIntEgrRcvOAMCells 1.3.6.1.4.1.9.9.319.1.2.2.1.12 counter64 read-only
The number of OAM cells received from the switch at the traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvOAMCells.
                         cpAtmIfHCIntEgrRcvEFCICells 1.3.6.1.4.1.9.9.319.1.2.2.1.13 counter64 read-only
The number of EFCI cells received from the switch at traffic management and policing device during a 15 minute interval. This object is a 64-bit version of cpAtmIfIntEgrRcvEFCICells.
                 cpAtmIfStatsIngressTable 1.3.6.1.4.1.9.9.319.1.2.3 no-access
This table reflects real time statistics associated with each of the the propAtm interfaces on the ingress side. Ingress terminology is used for the cells that are generated by the voice gateway on the TDM side and are going toward the ATM switch. Egress terminology means the cells that are coming from the ATM switch into TDM side. This table contains statistics from this ingress point of view.
                     cpAtmIfStatsIngressEntry 1.3.6.1.4.1.9.9.319.1.2.3.1 no-access
An entry in the cpAtmIfStatsIngressTable table for each propAtm port interface. CLP-0 means Cell Loss Priority = 0, CLP-1 means Cell Loss Priority = 1.
                         cpAtmIfIngXmtClp0Cells 1.3.6.1.4.1.9.9.319.1.2.3.1.1 counter32 read-only
The number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction.
                         cpAtmIfIngXmtClp1Cells 1.3.6.1.4.1.9.9.319.1.2.3.1.2 counter32 read-only
The number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction.
                         cpAtmIfIngXmtEFCICells 1.3.6.1.4.1.9.9.319.1.2.3.1.3 counter32 read-only
The number of EFCI cells transmitted to the switch after traffic management and policing in ingress direction.
                         cpAtmIfIngXmtOAMCells 1.3.6.1.4.1.9.9.319.1.2.3.1.4 counter32 read-only
The number of OAM loopback cells transmitted to switch after traffic management and policing in ingress direction.
                         cpAtmIfHCIngXmtClp0Cells 1.3.6.1.4.1.9.9.319.1.2.3.1.5 counter64 read-only
The number of CLP-0 cells transmitted to the switch after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtClp0Cells.
                         cpAtmIfHCIngXmtClp1Cells 1.3.6.1.4.1.9.9.319.1.2.3.1.6 counter64 read-only
The number of CLP-1 cells transmitted to the switch after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtClp1Cells.
                         cpAtmIfHCIngXmtEFCICells 1.3.6.1.4.1.9.9.319.1.2.3.1.7 counter64 read-only
The number of EFCI cells transmitted to the switch after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtEFCICells.
                         cpAtmIfHCIngXmtOAMCells 1.3.6.1.4.1.9.9.319.1.2.3.1.8 counter64 read-only
The number of OAM loopback cells transmitted to switch after traffic management and policing in ingress direction. This object is a 64-bit version of cpAtmIfIngXmtOAMCells.
         cpAtmIfMIBConformance 1.3.6.1.4.1.9.9.319.2
             cpAtmIfMIBCompliances 1.3.6.1.4.1.9.9.319.2.1
                 cpAtmIfMIBCompliance 1.3.6.1.4.1.9.9.319.2.1.1
The compliance statement for the SNMP entities which implement ciscoPropAtmIfMIB.
             cpAtmIfMIBGroups 1.3.6.1.4.1.9.9.319.2.2
                 cpAtmIfConfigGroup 1.3.6.1.4.1.9.9.319.2.2.1
These are objects related to configuration of propAtm Interface.
                 cpAtmIfEgressStatMIBGroup 1.3.6.1.4.1.9.9.319.2.2.2
These are objects related to Egress Statistics of propAtm interfaces.
                 cpAtmIfEgressIntervalMIBGroup 1.3.6.1.4.1.9.9.319.2.2.3
These are objects related to Egress Interval Statistics of propAtm Interfaces.
                 cpAtmIfIngressStatMIBGroup 1.3.6.1.4.1.9.9.319.2.2.4
These are objects related to Ingress Statistics of propAtm interfaces.
                 cpAtmIfHCEgressStatMIBGroup 1.3.6.1.4.1.9.9.319.2.2.5
These are objects related to Egress Statistics of propAtm interfaces. This group is a 64-bit version of cpAtmIfEgressStatMIBGroup.
                 cpAtmIfHCEgressIntervalMIBGroup 1.3.6.1.4.1.9.9.319.2.2.6
These are objects related to Egress Interval Statistics of propAtm Interfaces. This group is a 64-bit version of cpAtmIfEgressIntervalMIBGroup.
                 cpAtmIfHCIngressStatMIBGroup 1.3.6.1.4.1.9.9.319.2.2.7
These are objects related to Ingress Statistics of propAtm interfaces. This group is a 64-bit version of cpAtmIfIngressStatMIBGroup.