CISCO-POE-PD-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-POE-PD-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoPoePdMIB 1.3.6.1.4.1.9.9.414
This MIB is intended for devices powered by external power sources, in particular Power Over Ethernet (PoE or formerly called inline power), to provide power usage configuration and information for NMS. For example, PoE supplies DC power over standard Category 5 unshielded twisted-pair (UTP) cable. Instead of requiring wall power, powered devices such as IP telephones can utilize power provided from power source equipments. By using Cisco Discovery Protocol (CDP), powered devices can negotiated with power source equipment to obtain optimum power supply. GLOSSARY Midspan Injector The midspan PSE sends out a signal tone down one of the unused pairs of the standard Category 5 cable and detects tone on the other unused pair when the PD loops this tone back to it through a loopback transformer. Once the midspan PSE detects this tone, it begins to provide power down the cable using the unused pairs. The midspan PSE provide no physical layer capability. Powered Device ( PD ) These are devices powered by external electrical power sources. They are, for example, IP telephones and wireless Access Points or bridges. Power Source Equipment ( PSE ) These are devices supplying electrical power to other equipments. They are, for example, inline power switches and power patch panels.
         cpoePdMIBNotifications 1.3.6.1.4.1.9.9.414.0
         cpoePdMIBObjects 1.3.6.1.4.1.9.9.414.1
             cpoePdInformation 1.3.6.1.4.1.9.9.414.1.1
                 cpoePdCurrentPowerLevel 1.3.6.1.4.1.9.9.414.1.1.1 unsigned32 read-only
This identifies the currently how much power is consummed by the device at which this agent is running. The level shall be one of the cpoePdSupportedPowerLevel in the cpoePdSupportedPowerTable.
                 cpoePdCurrentPowerSource 1.3.6.1.4.1.9.9.414.1.1.2 cpoepdpowersourcetype read-only
This is the current power source type obtained from device power source detection.
                 cpoePdSupportedPowerLevelTable 1.3.6.1.4.1.9.9.414.1.1.3 no-access
This table shows all the supported electrical power consumption levels of this agent and the corresponding modes of operation at those power levels. The mode of operation and the device capability changes as the supplied power level varies. The number of supported levels is platform and implementation dependent.
                     cpoePdSupportedPowerLevelEntry 1.3.6.1.4.1.9.9.414.1.1.3.1 no-access
Each entry shows a supported power level and the corresponding mode of operation.
                         cpoePdSupportedPowerLevel 1.3.6.1.4.1.9.9.414.1.1.3.1.1 unsigned32 no-access
This index uniquely identifies the supported power consumption level.
                         cpoePdSupportedPower 1.3.6.1.4.1.9.9.414.1.1.3.1.2 unsigned32 read-only
This is the electrical power consummed by the device operating at this supported power consumption level.
                         cpoePdSupportedPowerMode 1.3.6.1.4.1.9.9.414.1.1.3.1.3 snmpadminstring read-only
This is a text string describing the mode of operation or capability of the device at the power consumption level. For example, the comsumption level and corresponding mode should look like these: 1 'Full power mode' 2 'Low power mode - dot11radio 0 disabled' 3 'Low power mode - dot11radio 1 disabled' 4 'Low power mode - dot11 radios disabled'.
         cpoePdMIBConformance 1.3.6.1.4.1.9.9.414.2
             cpoePdMIBCompliances 1.3.6.1.4.1.9.9.414.2.1
                 cpoePdMIBCompliance 1.3.6.1.4.1.9.9.414.2.1.1
The compliance statement for the SNMP entities that implement the ciscoPoePdMIB module.
             cpoePdMIBGroups 1.3.6.1.4.1.9.9.414.2.2
                 cpoePdInformationGroup 1.3.6.1.4.1.9.9.414.2.2.1
This collection of objects provide information about the supported electrical power level, current power consumption, and mode of operation of this agent.