CISCO-MPLS-LSR-EXT-STD-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-MPLS-LSR-EXT-STD-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CISCO-SMI, MPLS-LSR-STD-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmplsLsrExtStdMIB 1.3.6.1.4.1.9.10.145
Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This MIB module contains generic object definitions for MPLS LSR in transport networks.
         cmplsLsrExtNotifications 1.3.6.1.4.1.9.10.145.0
         cmplsLsrExtObjects 1.3.6.1.4.1.9.10.145.1
             cmplsXCExtTable 1.3.6.1.4.1.9.10.145.1.1 no-access
This table sparse augments the mplsXCTable of MPLS-LSR-STD-MIB [RFC3813] to provide MPLS-TP specific information about associated tunnel information
                 cmplsXCExtEntry 1.3.6.1.4.1.9.10.145.1.1.1 no-access
An entry in this table extends the cross connect information represented by an entry in the mplsXCTable in MPLS-LSR-STD-MIB [RFC3813] through a sparse augmentation. An entry can be created by a network administrator via SNMP SET commands, or in response to signaling protocol events.
                     cmplsXCExtTunnelPointer 1.3.6.1.4.1.9.10.145.1.1.1.1 rowpointer read-only
This object indicates the back pointer to the tunnel entry segment. This object cannot be modified if mplsXCRowStatus for the corresponding entry in the mplsXCTable is active(1).
                     cmplsXCOppositeDirXCPtr 1.3.6.1.4.1.9.10.145.1.1.1.2 rowpointer read-only
This object indicates the pointer to the opposite direction XC entry. This object cannot be modified if mplsXCRowStatus for the corresponding entry in the mplsXCTable is active(1).
         cmplsLsrExtConformance 1.3.6.1.4.1.9.10.145.2
             cmplsLsrExtGroups 1.3.6.1.4.1.9.10.145.2.1
                 cmplsXCExtGroup 1.3.6.1.4.1.9.10.145.2.1.1
This object should be supported in order to access the tunnel entry from XC entry.
             cmplsLsrExtCompliances 1.3.6.1.4.1.9.10.145.2.2
                 cmplsLsrExtModuleFullCompliance 1.3.6.1.4.1.9.10.145.2.2.1
Compliance statement for agents that provide full support for MPLS-LSR-EXT-STD-MIB. The mandatory group has to be implemented by all LSRs that originate, terminate, or act as transit for TE-LSPs/tunnels. In addition, depending on the type of tunnels supported, other groups become mandatory as explained below.
                 cmplsLsrExtModuleReadOnlyCompliance 1.3.6.1.4.1.9.10.145.2.2.2
Compliance requirement for implementations that only provide read-only support for MPLS-LSR-EXT-STD-MIB. Such devices can then be monitored but cannot be configured using this MIB module.