CISCO-MGX82XX-RPM-SUBIF-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-MGX82XX-RPM-SUBIF-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
                 rpmPortTable 1.3.6.1.4.1.351.110.5.2.9.1.1 no-access
This table contains information on subinterfaces configured on RPM back plane interface.
                     rpmPortEntry 1.3.6.1.4.1.351.110.5.2.9.1.1.1 no-access
An entry for the RPM backplane sub interface. Each entry contains RPM's backplane sub interface number, its IP address and ATM address.
                         rpmPortSlotNum 1.3.6.1.4.1.351.110.5.2.9.1.1.1.1 integer32 read-only
This object specifies the the slot number of the RPM card in MGX shelf.
                         rpmPortInterface 1.3.6.1.4.1.351.110.5.2.9.1.1.1.2 integer32 read-only
This is the RPM's backplane interface. Currently there is only one interface and hence only supported value is 1.
                         rpmPortSubInterface 1.3.6.1.4.1.351.110.5.2.9.1.1.1.3 integer32 read-only
This object identifies the sub-interface number. The value 0 is for the sub-interface on the main interface(rpmPortInterface).
                         rpmPortRowStatus 1.3.6.1.4.1.351.110.5.2.9.1.1.1.4 integer read-only
This indicates the status of this subinterface. add(1) : sub-interface is added. del(2) : sub-interface is deleted. mod(3) : Set to this value before modifying objects related to Subinterfaces. Enumeration: 'add': 1, 'del': 2, 'mod': 3.
                         rpmPortIpAddress 1.3.6.1.4.1.351.110.5.2.9.1.1.1.5 ipaddress read-only
IP address configured on the sub-interface.
                         rpmPortSubNetMask 1.3.6.1.4.1.351.110.5.2.9.1.1.1.6 ipaddress read-only
The subnet mask configured on the sub-interface.
                         rpmPortState 1.3.6.1.4.1.351.110.5.2.9.1.1.1.7 integer read-only
This indicates the state of this sub-interface. notConfigured(1) : Sub-interface is not configured. active(2) : Sub-interface is in active state. failed(3) : Sub-interface is in failed state. Enumeration: 'active': 2, 'failed': 3, 'notConfigured': 1.
 ciscoMgx82xxRpmSubIfMIB 1.3.6.1.4.1.351.150.60
This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the MGX controller to manage the RPM. The RPM family of Router Modules run the IOS Operating System
       cmrSubIfMIBConformance 1.3.6.1.4.1.351.150.60.2
           cmrSubIfMIBCompliances 1.3.6.1.4.1.351.150.60.2.1
               cmrSubIfMIBCompliance 1.3.6.1.4.1.351.150.60.2.1.1
The compliance statement for the Cisco MGX RPM sub-interface MIB.
           cmrSubIfMIBGroups 1.3.6.1.4.1.351.150.60.2.2
               cmrSubIfMIBGroup 1.3.6.1.4.1.351.150.60.2.2.1
Objects related to ATM Subinterface in RPM module.