CISCO-MGX82XX-RPM-RSRC-PART-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-MGX82XX-RPM-RSRC-PART-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
             rpmIfCnfResPart 1.3.6.1.4.1.351.110.5.2.9.2
                 rpmIfCnfRscPartTable 1.3.6.1.4.1.351.110.5.2.9.2.1 no-access
The table is for RPM interface resource partition.
                     rpmIfCnfRscPartEntry 1.3.6.1.4.1.351.110.5.2.9.2.1.1 no-access
An entry for resource partition configuration on a logical interface. A resource partition need to be configured before connections(or connection endpoints) can be added to the interface.
                         rpmIfRscSlotNum 1.3.6.1.4.1.351.110.5.2.9.2.1.1.1 integer32 read-only
This object identifies the slot number of the RPM card in MGX shelf.
                         rpmIfRscPartIfNum 1.3.6.1.4.1.351.110.5.2.9.2.1.1.2 integer32 read-only
This is backplane interface number. Currently there is only one interface and value 1 is the only value supported.
                         rpmIfRscPartCtrlrNum 1.3.6.1.4.1.351.110.5.2.9.2.1.1.3 integer read-only
This object identifies the type of the controller which owns the resource partition. par(1) : Portable Auto Route Controller. This is a controller software implementing Cisco Proprietary protocol for network routing and topology. pnni(2): Private Network-to-Network Interface(PNNI) controller. This is a controller implementing ATM Forum PNNI protocol for routing. tag(3) : Tag Switching(MPLS) controller. This is a controller supporting MPLS protocol. Enumeration: 'pnni': 2, 'par': 1, 'tag': 3.
                         rpmIfRscPrtRowStatus 1.3.6.1.4.1.351.110.5.2.9.2.1.1.4 integer read-only
This object contains the information on whether subinterface exists or being modified. add(1) : sub-interface exists del(2) : sub-interface deleted mod(2) : sub-interface being modified Enumeration: 'add': 1, 'del': 2, 'mod': 3.
                         rpmIfRscPrtIngrPctBandwidth 1.3.6.1.4.1.351.110.5.2.9.2.1.1.5 integer32 read-only
The percentage of logical interface bandwidth.
                         rpmIfRscPrtEgrPctBandwidth 1.3.6.1.4.1.351.110.5.2.9.2.1.1.6 integer32 read-only
The percentage of logical interface bandwidth.
                         rpmIfRscPrtVpiLow 1.3.6.1.4.1.351.110.5.2.9.2.1.1.7 integer32 read-only
The beginning of the VPI range reserved for this partition.
                         rpmIfRscPrtVpiHigh 1.3.6.1.4.1.351.110.5.2.9.2.1.1.8 integer32 read-only
The end of the VPI range reserved for this partition.
                         rpmIfRscPrtVciLow 1.3.6.1.4.1.351.110.5.2.9.2.1.1.9 integer32 read-only
The beginning of the VCI range reserved for this partition. This field is only valid for logical interfaces configured with a single VPI.
                         rpmIfRscPrtVciHigh 1.3.6.1.4.1.351.110.5.2.9.2.1.1.10 integer32 read-only
The end of the VCI range reserved for this partition. This field is only valid for logical interfaces configured with a single VPI.
                         rpmIfRscPrtMaxChans 1.3.6.1.4.1.351.110.5.2.9.2.1.1.11 integer32 read-only
This represents maximum number of channels(connections) that are available to the controller.
 ciscoMgx82xxRpmRsrcPartMIB 1.3.6.1.4.1.351.150.61
The MIB module to manage resource partition objects. A resource partition is configured on a RPM subinterface. An administrator can partition connection related resources like VPI, VCI ranges, bandwidth and total amount of available connection entries in the switch through these MIB tables.
       cmrRsrcPartMIBConformance 1.3.6.1.4.1.351.150.61.3
           cmrRsrcPartMIBCompliances 1.3.6.1.4.1.351.150.61.3.1
               cmrRsrcPartMIBCompliance 1.3.6.1.4.1.351.150.61.3.1.1
The Compliance statement for Resource partition management group.
           cmrRsrcPartMIBGroups 1.3.6.1.4.1.351.150.61.3.2
               cmrRsrcPartMIBGroup 1.3.6.1.4.1.351.150.61.3.2.1
The collection of objects related to configuration of Resource partition.