CISCO-MGX82XX-RPM-CONN-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-MGX82XX-RPM-CONN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
                   rpmChanGrpTable 1.3.6.1.4.1.351.110.5.2.10.1.1 no-access
This table contains endpoint configuration information for connections applicable to RPM service module.
                       rpmChanGrpEntry 1.3.6.1.4.1.351.110.5.2.10.1.1.1 no-access
An entry for logical channel. Each entry corresponds to a connection endpoint identified by Slot number and channel number.
                           rpmChanSlotNum 1.3.6.1.4.1.351.110.5.2.10.1.1.1.1 integer32 read-only
Specifies the slot number of the RPM card.
                           rpmChanInterface 1.3.6.1.4.1.351.110.5.2.10.1.1.1.2 integer32 read-only
This is the RPM's backplane interface. Currently there is only one interface.
                           rpmChanNum 1.3.6.1.4.1.351.110.5.2.10.1.1.1.3 integer32 read-only
This object identifies the channel number. This is also called Logical Connection Number(LCN). This is a unique number which identifies a connection. The LCN maps VPI and VCI. For VCC, VCI range is 1..3825, and LCN range is 16..3840. LCN = VCI + 16. For VPC, VPI range is 1..255 and LCN range is 3841..4095. LCN = VPI + 3840.
                           rpmChanRowStatus 1.3.6.1.4.1.351.110.5.2.10.1.1.1.4 integer read-only
This indicates the status of this channel. add(1) : Channel is added. del(2) : channel is deleted. mod(3) : Set to this value before modifying objects related to connection endpoints. Enumeration: 'add': 1, 'del': 2, 'mod': 3.
                           rpmChanVcd 1.3.6.1.4.1.351.110.5.2.10.1.1.1.5 integer32 read-only
Virtual Circuit Descriptor. A unique number which identifies a connection.
                           rpmChanVpi 1.3.6.1.4.1.351.110.5.2.10.1.1.1.6 integer32 read-only
The VPI value for this channel. For VPC, VPI range is 1..255 and LCN range is 3841..4095. LCN = VPI + 3840
                           rpmChanVci 1.3.6.1.4.1.351.110.5.2.10.1.1.1.7 integer32 read-only
The VCI value for this channel. For VCC, VCI range is 1..3825, and LCN range is 16..3840. LCN = VCI + 16.
                           rpmChanSubInterface 1.3.6.1.4.1.351.110.5.2.10.1.1.1.8 integer32 read-only
This is the RPM's backplane sub-interface.
                           rpmChanLocalVpi 1.3.6.1.4.1.351.110.5.2.10.1.1.1.9 integer32 read-only
This VPI together with the local VCI and NSAP represents the local end point in this connection. The VPI value is zero for rpmChanConnType value of vcc(2).
                           rpmChanLocalVci 1.3.6.1.4.1.351.110.5.2.10.1.1.1.10 integer32 read-only
This VCI together with the local VPI and NSAP represents the local end point in this connection.
                           rpmChanLocalNsap 1.3.6.1.4.1.351.110.5.2.10.1.1.1.11 rpmnsapaddress read-only
This object identifies the local NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved : 2 bytes Slot/Port : 2 bytes[5 bit slot, 11 bits port] Selector : 1 byte. Of the 13 bytes for the node name, only the first 8 bytes are used. If the node name is n (0 < n < 8) bytes long, the node name must be left justified ( Bytes 1 to n contain the node name and bytes (n+1) to 8 must be 0 ). Bytes 9-13 must be always 0.
                           rpmChanRemoteVpi 1.3.6.1.4.1.351.110.5.2.10.1.1.1.12 integer32 read-only
This VPI together with the remote VCI and NSAP represents the remote end point in this connection.
                           rpmChanRemoteVci 1.3.6.1.4.1.351.110.5.2.10.1.1.1.13 integer32 read-only
This VCI together with the remote VPI and NSAP represents the remote end point in this connection.
                           rpmChanRemoteNsap 1.3.6.1.4.1.351.110.5.2.10.1.1.1.14 rpmnsapaddress read-only
This object identifies the remote NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved : 2 bytes Slot/Port : 2 bytes[5 bit slot, 11 bits port] Selector : 1 byte.
                           rpmChanType 1.3.6.1.4.1.351.110.5.2.10.1.1.1.15 integer read-only
This object identifies the channel type svc(1) : Switched Virtual Connection pvc(2) : Permanent Virtual Connection spvc(3) : Soft PVC. Enumeration: 'spvc': 3, 'pvc': 2, 'svc': 1.
                           rpmChanConnType 1.3.6.1.4.1.351.110.5.2.10.1.1.1.16 integer read-only
This specifies the connection type vpc(1) : Virtual Path Connection vcc(1) : Virtual Channel Connection Enumeration: 'vcc': 2, 'vpc': 1.
                           rpmChanServiceType 1.3.6.1.4.1.351.110.5.2.10.1.1.1.17 integer read-only
This object identifies the connection service type. cbr (1) : Constant Bit Rate vbr (2) : Variable Bit Rate ubr (4) : Unspecified Bit Rate atfr (5) : ATM Frame Relay abrstd (6) : Standard ABR abrfst (7) : foresight ABR. Enumeration: 'ubr': 4, 'cbr': 1, 'vbr': 2, 'abrfst': 7, 'abrstd': 6, 'atfr': 5.
                           rpmChanMastership 1.3.6.1.4.1.351.110.5.2.10.1.1.1.18 integer read-only
This specifies which end of the connection is the master. This is used by PXM to determine if this end point is master or slave. Enumeration: 'slave': 2, 'master': 1, 'unknown': 3.
                           rpmChanRtePriority 1.3.6.1.4.1.351.110.5.2.10.1.1.1.19 integer32 read-only
This is also known as class of service, it is used by PXM to determine how important this connection is when selecting connections to route.
                           rpmChanMaxCost 1.3.6.1.4.1.351.110.5.2.10.1.1.1.20 integer32 read-only
Maximum allowed cost. It is related to Cost Based Routing. This is used by PXM so that it won't choose a path with a cost greater than this configured level.
                           rpmChanRestrictTrkType 1.3.6.1.4.1.351.110.5.2.10.1.1.1.21 integer read-only
Restricted trunk type for routing, used by PXM. It specifies that the connection either cannot be routed over satellite trunks or terrestrial trunks, or it can be on any type of trunk. Enumeration: 'terrestrialTrunk': 2, 'noRestriction': 1, 'satelliteTrunk': 3.
                           rpmChanPCR 1.3.6.1.4.1.351.110.5.2.10.1.1.1.22 integer32 read-only
Peak cell rate.(in cells per sec.)
                           rpmChanRemotePCR 1.3.6.1.4.1.351.110.5.2.10.1.1.1.23 integer32 read-only
Peak cell rate of the remote endpoint of the connection. If not set, its value will be same as the value of rpmChanPCR.
                           rpmChanMCR 1.3.6.1.4.1.351.110.5.2.10.1.1.1.24 integer32 read-only
Minimum cell rate.(in cells per sec.).
                           rpmChanRemoteMCR 1.3.6.1.4.1.351.110.5.2.10.1.1.1.25 integer32 read-only
Minimum cell rate of the remote endpoint. If this is not set, its value will be same as value of rpmChanMCR.
                           rpmChanPercentUtil 1.3.6.1.4.1.351.110.5.2.10.1.1.1.26 integer32 read-only
This is the expected long-term utilization of the channel by this end-point.
                           rpmChanRemotePercentUtil 1.3.6.1.4.1.351.110.5.2.10.1.1.1.27 integer32 read-only
This is the expected long-term utilization of the channel by the other end-point. If this is not specified in the connection setup request, it'll be set to be the same as the local end.
                           rpmChanEncapType 1.3.6.1.4.1.351.110.5.2.10.1.1.1.28 integer read-only
This object identifies the ATM adaptation layer (AAL) and Encapsulation type. aal5snap - LLC/SNAP precedes the protocol datagram. aal34smds - Encapsulation for SMDS network. aal5nlpid - Encapsulation that allows ATM interfaces to interoperate with HSSI. qsaal - signaling type PVC used for setting up or tearing down SVCs. ilmi - used to set up communication with ILMI. aal5mux[protocol] - a MUX-type Virtual circuit. ppp - PPP over ATM. The Encapsulation types aal34smds, qsaal and ilmi are not supported. Enumeration: 'aal5muxNOVELL1': 10, 'aal5muxIP': 7, 'aal5snap': 1, 'unknown': 12, 'aal34smds': 2, 'aal5muxVINES': 8, 'qsaal': 4, 'aal5muxDECNET': 9, 'ilmi': 5, 'aal5muxXNS': 6, 'ppp': 11, 'aal5nlpid': 3.
                           rpmChanMidLow 1.3.6.1.4.1.351.110.5.2.10.1.1.1.29 integer32 read-only
Starting Message Identifier Number for this PVC.
                           rpmChanMidHigh 1.3.6.1.4.1.351.110.5.2.10.1.1.1.30 integer32 read-only
Ending Message Identifier Number for this PVC.
                           rpmChanBurstSize 1.3.6.1.4.1.351.110.5.2.10.1.1.1.31 integer32 read-only
The Maximum number of ATM cells the virtual circuit can transmit.
                           rpmChanInArpFreq 1.3.6.1.4.1.351.110.5.2.10.1.1.1.32 integer32 read-only
Specifies how often Inverse ARP datagrams will be sent on this virtual circuit. The value zero will disable the IN-ARP for this channel. This object is supported only for the value of rpmChanEncapType = aal5snap.
                           rpmChanOAMloopback 1.3.6.1.4.1.351.110.5.2.10.1.1.1.33 integer32 read-only
This object specifies how often to generate an OAM F5 loopback cell from this virtual circuit. The value zero will disable generation of OAM F5 loopback cells.
                           rpmChanState 1.3.6.1.4.1.351.110.5.2.10.1.1.1.34 integer read-only
This indicates the status of this channel. 1 ==> notConfigured 2 ==> active 3 ==> failed. Currently 'failed' state is not supported. When the channel is not added, the state is notConfigured. Enumeration: 'active': 2, 'failed': 3, 'notConfigured': 1.
                           rpmChanVirtualTemplate 1.3.6.1.4.1.351.110.5.2.10.1.1.1.35 integer32 read-only
Specifies the Virtual Template used for CISCO PPP. If it is not using Virtual Template then this value is zero.
                           rpmChanAbrRDF 1.3.6.1.4.1.351.110.5.2.10.1.1.1.36 integer32 read-only
This is valid only for ABR Service Type. Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1 are received. Larger values lead to faster rate decrease.
                           rpmChanAbrRIF 1.3.6.1.4.1.351.110.5.2.10.1.1.1.37 integer32 read-only
This is valid only for ABR Service Type. Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase.
 ciscoMgx82xxRpmConnMIB 1.3.6.1.4.1.351.150.62
The connection MIB module for RPM(Router Blade) service module in MGX8250/MGX8230 products. The 'channel' and 'connection' and 'connection endpoint' mean same in this MIB.
       cmrConnMIBConformance 1.3.6.1.4.1.351.150.62.2
           cmrConnMIBCompliances 1.3.6.1.4.1.351.150.62.2.1
               cmrConnMIBCompliance 1.3.6.1.4.1.351.150.62.2.1.1
The compliance statement for the Cisco MGX RPM connection management group.
           cmrConnMIBGroups 1.3.6.1.4.1.351.150.62.2.2
               cmrConnConfGroup 1.3.6.1.4.1.351.150.62.2.2.1
The objects related to Connections on RPM card.