CISCO-LWAPP-U3INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO

Home	MIB: CISCO-LWAPP-U3INTERFACE-MIB
Download as:		SNMPv2-CONF, CISCO-LWAPP-WLAN-MIB, CISCO-LWAPP-DOT11-CLIENT-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
ciscoLwappU3InterfaceMIB	1.3.6.1.4.1.9.9.852			U3 Interface between WLC and CWC(Cellular WLAN Controller) is present to support Real-Time Traffic Steering(RTTS) of client between 3GPP networks and WLAN. Throughput needs to be calculated at WLC and shared with the CWC to take decision to steer the traffic to WLAN or not. It is also defined to reject client in case if throughput is not satisfactory along with periodic updation of throughput. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected to. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the controllers. Cellular WLAN Controller ( CWC ) A decision making entity to steer traffic over LTE or WLAN.
ciscoLwappU3InterfaceMIBNotifs	1.3.6.1.4.1.9.9.852.0
ciscoLwappU3InterfaceMIBObjects	1.3.6.1.4.1.9.9.852.1
ciscoLwappU3InterfaceMIBTableObjects	1.3.6.1.4.1.9.9.852.1.1
cLU3InterfaceWlanTable	1.3.6.1.4.1.9.9.852.1.1.1		no-access	This table represents the information about u3-interface on a WLAN.
cLU3InterfaceWlanEntry	1.3.6.1.4.1.9.9.852.1.1.1.1		no-access	Each entry in this table represents the configuration attributes of u3-interface on a WLAN.
cLU3InterfaceWlanStatus	1.3.6.1.4.1.9.9.852.1.1.1.1.1	truthvalue	read-write	This object specifies the status of u3-interface on a particular WLAN. A value of 'true' indicates that u3-interface is enabled on a WLAN. A value of 'false' indicates that u3-interface is disabled on a WLAN.
cLU3InterfaceReportingInterval	1.3.6.1.4.1.9.9.852.1.1.1.1.2	unsigned32	read-write	This object specifies the interval at which AP needs to send throughput details of all the U3 interface clients on a particular WLAN to the WLC. Reporting interval range is 30 - 90 seconds.
cLU3InterfaceClientTable	1.3.6.1.4.1.9.9.852.1.1.2		no-access	This table represents the information about U3 interface clients.
cLU3InterfaceClientEntry	1.3.6.1.4.1.9.9.852.1.1.2.1		no-access	Each entry in this table represents the U3 interface clients attributes. Some of these attributes will be sent by the CWC and some of them will be evaluated at the WLC.
cLU3InterfaceClientSkipCount	1.3.6.1.4.1.9.9.852.1.1.2.1.1	unsigned32	read-only	This object represents the number of times WLC can skip informing about estimated throughput of a U3 interface client to CWC.
cLU3InterfaceClientKeepAliveCount	1.3.6.1.4.1.9.9.852.1.1.2.1.2	unsigned32	read-only	This object represents the maximum number of times WLC can skip reporting throughput of a U3 interface client to CWC when throughput is greater than the threshold represented by cLU3InterfaceClientThreshold.
cLU3InterfaceClientEstimatePeriod	1.3.6.1.4.1.9.9.852.1.1.2.1.3	unsigned32	read-only	This object represents the interval at which WLC has to report the estimated throughput of a U3 interface client to CWC. This value is sent by CWC to WLC.
cLU3InterfaceClientBackoffTimer	1.3.6.1.4.1.9.9.852.1.1.2.1.4	unsigned32	read-only	This object represents the time for which U3 interface client will not be allowed after U3 interface client getting rejected for throughput below threshold.
cLU3InterfaceClientThroughput	1.3.6.1.4.1.9.9.852.1.1.2.1.5	unsigned32	read-only	This object represents the calculated throughput of a U3 interface client.
cLU3InterfaceClientThreshold	1.3.6.1.4.1.9.9.852.1.1.2.1.6	unsigned32	read-only	This object represents the minimum threshold throughput of a U3 interface client. The value of this object is sent by CWC to WLC. If the calculated throughput values of the Client is below the cLU3InterfaceClientThreshold have to be reported at every time interval specified in cLU3InterfaceClientEstimatePeriod.
cLU3InterfaceClientEarlyLift	1.3.6.1.4.1.9.9.852.1.1.2.1.7	unsigned32	read-only	This object represents the minimum throughput of U3 interface client to join the WLAN. The value of this object is sent by CWC to WLC.
ciscoLwappU3InterfaceMIBConform	1.3.6.1.4.1.9.9.852.2
ciscoLwappU3InterfaceMIBCompliances	1.3.6.1.4.1.9.9.852.2.1
ciscoLwappU3InterfaceMIBCompliance	1.3.6.1.4.1.9.9.852.2.1.1			The compliance statement for the SNMP entities that implement the ciscoLwappU3interfaceMIB module.
ciscoLwappU3InterfaceMIBGroups	1.3.6.1.4.1.9.9.852.2.2
cLU3InterfaceConfigGroup	1.3.6.1.4.1.9.9.852.2.2.1			This is a collection of objects which can be configured to control u3-interface parameters.
cLU3InterfaceClientMonitorGroup	1.3.6.1.4.1.9.9.852.2.2.2			This is a collection of objects which can be used to monitor the U3 interface clients parameters.