CISCO-LAG-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-LAG-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, IEEE8023-LAG-MIB, CISCO-TC, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoLagMIB 1.3.6.1.4.1.9.9.225
Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
         clagMIBObjects 1.3.6.1.4.1.9.9.225.1
             clagGlobalConfigObjects 1.3.6.1.4.1.9.9.225.1.1
                 clagAggDistributionProtocol 1.3.6.1.4.1.9.9.225.1.1.1 clagdistributionprotocol read-write
This object controls the load balancing algorithms used on this port channel interface to distribute outgoing data frames among its component interfaces.
                 clagAggDistributionAddressMode 1.3.6.1.4.1.9.9.225.1.1.2 clagdistributionaddressmode read-write
The load balancing address mode for the device.
                 clagAggDistributionMplsProtocol 1.3.6.1.4.1.9.9.225.1.1.3 clagdistributionmplsprotocol read-write
This object controls the load balancing algorithms used on this port channel interface to distribute outgoing MPLS data frames among its component interfaces. This object is only instantiated on platforms which support aggregation load balancing for MPLS packets.
                 clagAggMaxAggregators 1.3.6.1.4.1.9.9.225.1.1.4 unsigned32 read-only
This object indicates the maximum number of aggregators supported by the device.
                 clagAggHashDistMethodGlobalConfig 1.3.6.1.4.1.9.9.225.1.1.5 integer read-write
Specifies the global configuration for hash distribution method applied on a port channel interface among its channel members. adaptive(1) : Adaptive hash distribution for the bundle among port channel members. fixed(2) : Fixed hash distribution for the bundle among port channel members. Enumeration: 'adaptive': 1, 'fixed': 2.
             clagAgg 1.3.6.1.4.1.9.9.225.1.2
                 clagAggProtocolTable 1.3.6.1.4.1.9.9.225.1.2.1 no-access
A table that contains protocol information about every interface which supports link aggregation.
                     clagAggProtocolEntry 1.3.6.1.4.1.9.9.225.1.2.1.1 no-access
Entry containing aggregation protocol type for a particular interface. An entry is created in this table when its associated ifEntry is created and that interface supports link aggregation. The entry of this table is deleted when the associated ifEntry is removed.
                         clagAggProtocolType 1.3.6.1.4.1.9.9.225.1.2.1.1.1 clagaggregationprotocol read-write
The aggregation protocol type for the interface. On some platforms, aggregation protocol may be assigned per group. The group can be a collection of the ports which belong to a module or system. If the aggregation protocol is assigned to any of the ports in such group then the aggregation protocol will apply to all ports in the same group. On some platforms, aggregation protocol type can be assigned per aggregator. If multiple ports belong to a aggregator, the aggregation protocol assigned to any of the ports in such aggregator will apply to all ports in the same.
             clagAggPort 1.3.6.1.4.1.9.9.225.1.3
                 clagAggPortTable 1.3.6.1.4.1.9.9.225.1.3.1 no-access
A table that contains information about every aggregation port that is associated with this system. This table contains additional objects for the dot3adAggPortTable.
                     clagAggPortEntry 1.3.6.1.4.1.9.9.225.1.3.1.1 no-access
An entry containing additional management information applicable to a particular aggregation port.
                         clagAggPortAdminStatus 1.3.6.1.4.1.9.9.225.1.3.1.1.1 clagportadminstatus read-write
The administrative status of the LACP protocol on this aggregation port.
                         clagAggPortRate 1.3.6.1.4.1.9.9.225.1.3.1.1.2 integer read-write
Specifies the requested exchange rate of LACP packets on this interface. fast(1) : The device requests its peers to send LACP packets at fast rate to this interface. normal(2): The decice requests its peers to send LACP packets at normal rate to this interface. Enumeration: 'fast': 1, 'normal': 2.
             clagAggPortList 1.3.6.1.4.1.9.9.225.1.4
                 clagAggPortListTable 1.3.6.1.4.1.9.9.225.1.4.1 no-access
This table augments the dot3adAggPortListTable and provides the complete list of ports associated with each Aggregator.
                     clagAggPortListEntry 1.3.6.1.4.1.9.9.225.1.4.1.1 no-access
A list of the ports associated with a given Aggregator.
                         clagAggPortListPorts 1.3.6.1.4.1.9.9.225.1.4.1.1.1 octet string read-only
This object contains a list of ports currently associated with this Aggregator in the format of '[number_of_ports][cieIfDot1dBaseMappingPort1][...] [cieIfDot1dBaseMappingPortn]' where [number_of_ports] is of size 2 octet and indicates the number of ports contains in this object. It also indicates the number of cieIfDot1dBaseMappingPort field following this field. [cieIfDot1dBaseMappingPort'n'] is the value of cieIfDot1dBaseMappingPort of the 'n' port associated with this Aggregation and has size of 2 octets where n is up to [number_of_ports].
                         clagAggPortListInterfaceIndexList 1.3.6.1.4.1.9.9.225.1.4.1.1.2 ciscointerfaceindexlist read-only
This object contains a list of ports currently associated with this Aggregator in the format of CiscoInterfaceIndexList.
             clagAggChannelIntf 1.3.6.1.4.1.9.9.225.1.5
                 clagAggChannelIfTable 1.3.6.1.4.1.9.9.225.1.5.1 no-access
A table providing port channel configuration information for port channel interfaces identified by ifIndex.
                     clagAggChannelIfEntry 1.3.6.1.4.1.9.9.225.1.5.1.1 no-access
An entry containing port channel configuration information for port channel interfaces.
                         clagAggChannelIfFastSwitchOver 1.3.6.1.4.1.9.9.225.1.5.1.1.1 truthvalue read-write
Specifies whether LACP protocol fast switchover mode is enabled on this port channel interface or not.
                         clagAggChannelIfMaxBundle 1.3.6.1.4.1.9.9.225.1.5.1.1.2 unsigned32 read-write
Specifies the maximum number of member ports that can be bundled on this port channel interface for LACP protocol.
                         clagAggChannelIfMinLink 1.3.6.1.4.1.9.9.225.1.5.1.1.3 unsigned32 read-write
Specifies the minimum number of bundled member ports that are needed in order for this port channel interface to be operational. A value of zero for this object indicates that no minimum number of bundled member ports are required for this port channel interface to be operational.
                         clagAggChannelIfHashDistAdminMethod 1.3.6.1.4.1.9.9.225.1.5.1.1.4 integer read-write
Specifies the hash distribution method that is administratively configured on this port channel interface upon its channel membership transition event. none(1) : Hash distribution algorithm on this port channel interface is not specifically configured and global configuration of clagAggHashDistMethodGlobalConfig will be applied on this port channel interface. adaptive(2) : Adaptive hash distribution for this port channel interface among its channel members. fixed(3) : Fixed hash distribution for this port channel interface among its channel members. Enumeration: 'none': 1, 'fixed': 3, 'adaptive': 2.
                         clagAggChannelIfHashDistOperMethod 1.3.6.1.4.1.9.9.225.1.5.1.1.5 integer read-only
Specifies the operational hash distribution method for this port channel interface among the port channel members. other(1) : None of the following. adaptive(2) : Adaptive hash distribution for the port channel interface among its channel members. fixed(3) : Fixed hash distribution for the port channel among channel members. Enumeration: 'adaptive': 2, 'other': 1, 'fixed': 3.
         clagMIBNotifications 1.3.6.1.4.1.9.9.225.2
         clagMIBConformance 1.3.6.1.4.1.9.9.225.3
             clagMIBCompliances 1.3.6.1.4.1.9.9.225.3.1
                 clagMIBCompliance 1.3.6.1.4.1.9.9.225.3.1.1
The compliance statement for entities which implement the Cisco Link Aggregation MIB
                 clagMIBCompliance2 1.3.6.1.4.1.9.9.225.3.1.2
The compliance statement for entities which implement the Cisco Link Aggregation MIB
                 clagMIBCompliance3 1.3.6.1.4.1.9.9.225.3.1.3
The compliance statement for entities which implement the Cisco Link Aggregation MIB
                 clagMIBCompliance4 1.3.6.1.4.1.9.9.225.3.1.4
The compliance statement for entities which implement the Cisco Link Aggregation MIB
                 clagMIBCompliance5 1.3.6.1.4.1.9.9.225.3.1.5
The compliance statement for entities which implement the Cisco Link Aggregation MIB
                 clagMIBCompliance6 1.3.6.1.4.1.9.9.225.3.1.6
The compliance statement for entities which implement the Cisco Link Aggregation MIB
             clagMIBGroups 1.3.6.1.4.1.9.9.225.3.2
                 clagAggProtocolGroup 1.3.6.1.4.1.9.9.225.3.2.1
The object that provide aggregation protocol type of an interface. These are additional to the IEEE Std 802.3ad MIB.
                 clagAggPortGroup 1.3.6.1.4.1.9.9.225.3.2.2
A collection of objects that provide admin status about an aggregation port. These are additional to the IEEE Std 802.3ad MIB.
                 clagAggDistributionGroup 1.3.6.1.4.1.9.9.225.3.2.3
A collection of objects that provide the load balancing information for an aggregator. These are additional to the IEEE Std 802.3ad MIB.
                 clagAggDistributionMplsGroup 1.3.6.1.4.1.9.9.225.3.2.4
A collection of objects that provide the load balancing information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB.
                 clagAggPortListGroup 1.3.6.1.4.1.9.9.225.3.2.5
A collection of object that provides information about ports in an aggregation.
                 clagAggMaxAggregatorsGroup 1.3.6.1.4.1.9.9.225.3.2.6
A collection of object that provides information about the maximum number of aggregators supported by the device.
                 clagAggRateGroup 1.3.6.1.4.1.9.9.225.3.2.7
A collection of object that provides information about the rate at which LACP packets are ingressed on interfaces.
                 clagAggChannelIfLacpGroup 1.3.6.1.4.1.9.9.225.3.2.8
A collection of objects that provides information about the LACP protocol configurations for port channel interfaces.
                 clagAggChannelIfHashDistMethodGroup 1.3.6.1.4.1.9.9.225.3.2.9
A collection of objects that provides information about the port channel configurations of hash distribution method on port channel interfaces.
                 clagAggHashDistGlobalGroup 1.3.6.1.4.1.9.9.225.3.2.10
A collection of object that provides information about global configuration of hash distribution method on port channel interface.
                 clagAggChannelIfMinLinkGroup 1.3.6.1.4.1.9.9.225.3.2.11
A collection of objects that provides information about the minimum link configurations for port channel interfaces.
                 clagAggPortListInterfaceIndexGroup 1.3.6.1.4.1.9.9.225.3.2.12
A collection of objects that provides information about ports in an aggregation in the format of CiscoInterfaceIndexList.