CISCO-ITP-ACT-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ITP-ACT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CISCO-ITP-TC-MIB, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoItpActMIB 1.3.6.1.4.1.9.9.230
The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7.
         cItpActMIBNotifs 1.3.6.1.4.1.9.9.230.0
         cItpActMIBObjects 1.3.6.1.4.1.9.9.230.1
             cItpActMtp3 1.3.6.1.4.1.9.9.230.1.1
                 cItpActMtp3Table 1.3.6.1.4.1.9.9.230.1.1.1 no-access
This table contains information about the number of packets and bytes at the MTP3 layer. The information collected from both directions(send and receive). The information is broken down by linkset, Destination Point Code (DPC), Originating Point Code (OPC) and Signalling Indicator (SI). This provides the lowest granularity required by Q752 and allows network management stations to calculate the required fields in Q752.
                     cItpActMtp3TableEntry 1.3.6.1.4.1.9.9.230.1.1.1.1 no-access
A list of MTP3 accounting objects.
                         cItpActMtp3TableId 1.3.6.1.4.1.9.9.230.1.1.1.1.1 integer no-access
The accounting table identifier. 'passed' : signifies that this table instance represents statistics for packets that matched an Access Control List (ACL) in the linkset's inbound ACL and in the outbound ACL. 'violation' : signifies that this table instance represents statistics for packets that did not match an ACL in the linkset's inbound ACL and in the outbound ACL. Enumeration: 'violation': 2, 'passed': 1.
                         cItpActMtp3LinksetName 1.3.6.1.4.1.9.9.230.1.1.1.1.2 citptclinksetid no-access
The name of the linkset.
                         cItpActMtp3Dpc 1.3.6.1.4.1.9.9.230.1.1.1.1.3 citptcpointcode no-access
The destination point code.
                         cItpActMtp3Opc 1.3.6.1.4.1.9.9.230.1.1.1.1.4 citptcpointcode no-access
The origin point code.
                         cItpActMtp3SI 1.3.6.1.4.1.9.9.230.1.1.1.1.5 citptcserviceindicator no-access
The service indicator.
                         cItpActMtp3RcvdPackets 1.3.6.1.4.1.9.9.230.1.1.1.1.6 counter32 read-only
Sum of all received packets for this linkset, DPC and OPC combination.
                         cItpActMtp3SentPackets 1.3.6.1.4.1.9.9.230.1.1.1.1.7 counter32 read-only
Sum of all transmitted packets for this linkset, DPC and OPC combination.
                         cItpActMtp3RcvdBytes 1.3.6.1.4.1.9.9.230.1.1.1.1.8 counter32 read-only
Sum of all received bytes for this linkset, DPC and OPC combination.
                         cItpActMtp3SentBytes 1.3.6.1.4.1.9.9.230.1.1.1.1.9 counter32 read-only
Sum of all transmitted bytes for this linkset, DPC and OPC combination.
             cItpActGtt 1.3.6.1.4.1.9.9.230.1.2
                 cItpActGttTable 1.3.6.1.4.1.9.9.230.1.2.1 no-access
This table contains information about the number of packets and bytes required for global title translation.
                     cItpActGttTableEntry 1.3.6.1.4.1.9.9.230.1.2.1.1 no-access
A list of Gtt accounting objects.
                         cItpActGttLinksetName 1.3.6.1.4.1.9.9.230.1.2.1.1.1 citptclinksetid no-access
The name of the linkset.
                         cItpActGttSelectorName 1.3.6.1.4.1.9.9.230.1.2.1.1.2 citptcglobaltitleselectorname no-access
The Global Title Selector Name.
                         cItpActGttGta 1.3.6.1.4.1.9.9.230.1.2.1.1.3 citptcgtaaddr no-access
The Global Title Address.
                         cItpActGttTranslatedPc 1.3.6.1.4.1.9.9.230.1.2.1.1.4 citptcpointcode no-access
The translated point code.
                         cItpActGttPackets 1.3.6.1.4.1.9.9.230.1.2.1.1.5 counter32 read-only
Number of packets performing Global Title Translation.
                         cItpActGttBytes 1.3.6.1.4.1.9.9.230.1.2.1.1.6 counter32 read-only
Count of bytes received that required Global Title Translation.
         cItpActMIBConformance 1.3.6.1.4.1.9.9.230.2
             cItpActMIBCompliances 1.3.6.1.4.1.9.9.230.2.1
                 cItpActMIBCompliance 1.3.6.1.4.1.9.9.230.2.1.1
The compliance statement for entities which implement the Cisco SP MIB
             cItpActMIBGroups 1.3.6.1.4.1.9.9.230.2.2
                 cItpActMtp3Group 1.3.6.1.4.1.9.9.230.2.2.1
Accounting for MTP3 objects.
                 cItpActGttGroup 1.3.6.1.4.1.9.9.230.2.2.2
Accounting for Global Title Translation.