CISCO-IETF-PIM-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-IETF-PIM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, CISCO-SMI, CISCO-IETF-IPMROUTE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoIetfPimMIB 1.3.6.1.4.1.9.10.119
Address family independent MIB module for management of PIM routers. This MIB module is based on RFC 2934 with additional MIB objects added to make it address family independent MIB. This Cisco MIB was created due to non availability of RFC or an Internet Draft, which can provide address family independent MIB for management of PIM routers. This MIB may later be deprecated with a stable RFC or an Internet Draft.
         cPimNotifs 1.3.6.1.4.1.9.10.119.0
             cPimNbrLoss 1.3.6.1.4.1.9.10.119.0.2
A cPimNbrLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.
         cPimMIBObjects 1.3.6.1.4.1.9.10.119.1
             cPim 1.3.6.1.4.1.9.10.119.1.1
                 cPimJoinPruneInterval 1.3.6.1.4.1.9.10.119.1.1.1 unsigned32 read-write
The default interval at which periodic PIM-SM Join/Prune messages are to be sent.
                 cPimIfTable 1.3.6.1.4.1.9.10.119.1.1.2 no-access
The (conceptual) table listing the router's PIM interfaces. Along with PIM IGMP or MLD is enabled on all interfaces listed in this table.
                     cPimIfEntry 1.3.6.1.4.1.9.10.119.1.1.2.1 no-access
An entry (conceptual row) in the pimIfTable.
                         cPimIfIndex 1.3.6.1.4.1.9.10.119.1.1.2.1.1 interfaceindex no-access
The ifIndex value of this PIM interface.
                         cPimIfInetVersion 1.3.6.1.4.1.9.10.119.1.1.2.1.2 inetversion no-access
The Inet version of this row.
                         cPimIfAddressType 1.3.6.1.4.1.9.10.119.1.1.2.1.3 inetaddresstype read-only
This objects identifies type of InetAddress presented in cPimIfAddress and cPimIfDR
                         cPimIfAddress 1.3.6.1.4.1.9.10.119.1.1.2.1.4 inetaddress read-only
The Inet address of the PIM interface.
                         cPimIfNetMask 1.3.6.1.4.1.9.10.119.1.1.2.1.5 inetaddressprefixlength read-only
The network mask for the IP address of the PIM interface.
                         cPimIfMode 1.3.6.1.4.1.9.10.119.1.1.2.1.6 integer read-only
The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. dense (1): indicates interface is running PIM dense mode sparse (2): indicates interface is running PIM sparse mode. sparseDense (3): indicates interface is running both dense and sparse mode. Enumeration: 'sparseDense': 3, 'dense': 1, 'sparse': 2.
                         cPimIfDR 1.3.6.1.4.1.9.10.119.1.1.2.1.7 inetaddress read-only
The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0 or 0::0
                         cPimIfHelloInterval 1.3.6.1.4.1.9.10.119.1.1.2.1.8 unsigned32 read-only
The frequency at which PIM Hello messages are transmitted on this interface.
                         cPimIfJoinPruneInterval 1.3.6.1.4.1.9.10.119.1.1.2.1.9 unsigned32 read-only
The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
                         cPimIfCBSRPreference 1.3.6.1.4.1.9.10.119.1.1.2.1.10 integer32 read-only
The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
                         cPimIfStatus 1.3.6.1.4.1.9.10.119.1.1.2.1.11 rowstatus read-only
The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.
                 cPimNbrTable 1.3.6.1.4.1.9.10.119.1.1.3 no-access
The (conceptual) table listing the router's PIM neighbors.
                     cPimNbrEntry 1.3.6.1.4.1.9.10.119.1.1.3.1 no-access
An entry (conceptual row) in the pimNbrTable.
                         cPimNbrIfIndex 1.3.6.1.4.1.9.10.119.1.1.3.1.1 interfaceindex no-access
The value of ifIndex for the interface used to reach this PIM neighbor.
                         cPimNbrAddressType 1.3.6.1.4.1.9.10.119.1.1.3.1.2 inetaddresstype no-access
This objects identifies type of InetAddress presented in cPimNbrAddress.
                         cPimNbrAddress 1.3.6.1.4.1.9.10.119.1.1.3.1.3 inetaddress no-access
The IP address of the PIM neighbor for which this entry contains information.
                         cPimNbrUpTime 1.3.6.1.4.1.9.10.119.1.1.3.1.4 timeticks read-only
The time since this PIM neighbor (last) became a neighbor of the local router.
                         cPimNbrExpiryTime 1.3.6.1.4.1.9.10.119.1.1.3.1.5 timeticks read-only
The minimum time remaining before this PIM neighbor will be aged out.
                 cPimInetMRouteTable 1.3.6.1.4.1.9.10.119.1.1.4 no-access
The (conceptual) table listing PIM-specific information on a subset of the rows of the cIpMRouteTable defined in the IP Multicast MIB.
                     cPimInetMRouteEntry 1.3.6.1.4.1.9.10.119.1.1.4.1 no-access
An entry (conceptual row) in the cPimInetMRouteTable. There is one entry per entry in the cIpMRouteTable whose incoming interface is running PIM.
                         cPimInetMRouteUpstreamAssertTime 1.3.6.1.4.1.9.10.119.1.1.4.1.1 timeticks read-only
The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor.
                         cPimInetMRouteAssertMetric 1.3.6.1.4.1.9.10.119.1.1.4.1.2 unsigned32 read-only
The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.
                         cPimInetMRouteAssertMetricPref 1.3.6.1.4.1.9.10.119.1.1.4.1.3 unsigned32 read-only
The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.
                         cPimInetMRouteAssertRPTBit 1.3.6.1.4.1.9.10.119.1.1.4.1.4 truthvalue read-only
The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.
                         cPimInetMRouteFlags 1.3.6.1.4.1.9.10.119.1.1.4.1.5 bits read-only
This object describes PIM-specific flags related to a multicast state entry. rpt (0): indicates the route is a shared-tree or RP-tree route. spt (1): indicates the route is a shortest-path-tree route. Bits: 'spt': 1, 'rpt': 0.
                 cPimInetMRouteNextHopTable 1.3.6.1.4.1.9.10.119.1.1.5 no-access
The (conceptual) table listing PIM-specific information on a subset of the rows of the cIpMRouteNextHopTable defined in the IP Multicast MIB.
                     cPimInetMRouteNextHopEntry 1.3.6.1.4.1.9.10.119.1.1.5.1 no-access
An entry (conceptual row) in the cPimInetMRouteNextHopTable. There is one entry per entry in the cIpMRouteNextHopTable whose interface is running PIM and whose cIpMRouteNextHopState is pruned(1).
                         cPimInetMRouteNextHopPruneReason 1.3.6.1.4.1.9.10.119.1.1.5.1.2 integer read-only
This object indicates the reason why downstream interface was pruned, prune (1): indicates downstream interface was pruned in response to a PIM prune message. assert (3): indicates downstream interface was pruned due to PIM assert processing. Enumeration: 'assert': 3, 'other': 1, 'prune': 2.
                 cPimRPMapTable 1.3.6.1.4.1.9.10.119.1.1.6 no-access
The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages.
                     cPimRPMapEntry 1.3.6.1.4.1.9.10.119.1.1.6.1 no-access
An entry (conceptual row) in the pimRPsTable.
                         cPimRPMapComponent 1.3.6.1.4.1.9.10.119.1.1.6.1.1 unsigned32 no-access
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
                         cPimRPMapAddrType 1.3.6.1.4.1.9.10.119.1.1.6.1.2 inetaddresstype no-access
Type of Inet address presented in this row. This includes cPimRPMapGroupAddress and cPimRPMapAddress
                         cPimRPMapGroupAddress 1.3.6.1.4.1.9.10.119.1.1.6.1.3 inetaddress no-access
The IP multicast group address which, when combined with pimRPsGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.
                         cPimRPMapGroupMask 1.3.6.1.4.1.9.10.119.1.1.6.1.4 inetaddressprefixlength no-access
The multicast group address mask which, when combined with pimRPsGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.
                         cPimRPMapAddress 1.3.6.1.4.1.9.10.119.1.1.6.1.5 inetaddress no-access
The IP address of the Candidate-RP.
                         cPimRPMapHoldTime 1.3.6.1.4.1.9.10.119.1.1.6.1.6 unsigned32 read-only
The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.
                         cPimRPMapExpiryTime 1.3.6.1.4.1.9.10.119.1.1.6.1.7 timeticks read-only
The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
                 cPimCRPTable 1.3.6.1.4.1.9.10.119.1.1.7 no-access
The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of cPimComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of cPimComponentCRPHoldTime is non- zero).
                     cPimCRPEntry 1.3.6.1.4.1.9.10.119.1.1.7.1 no-access
An entry (conceptual row) in the cPimCRPTable.
                         cPimCRPAddrType 1.3.6.1.4.1.9.10.119.1.1.7.1.1 inetaddresstype no-access
Type of Inet address presented in this row. This includes cPimCRPGroupAddress and cPimCRPAddress
                         cPimCRPGroupAddress 1.3.6.1.4.1.9.10.119.1.1.7.1.2 inetaddress no-access
The IP multicast group address which, when combined with cPimCRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
                         cPimCRPGroupMask 1.3.6.1.4.1.9.10.119.1.1.7.1.3 inetaddressprefixlength no-access
The multicast group address mask which, when combined with cPimCRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
                         cPimCRPAddress 1.3.6.1.4.1.9.10.119.1.1.7.1.4 inetaddress read-only
The (unicast) address of the interface which will be advertised as a Candidate-RP.
                         cPimCRPRowStatus 1.3.6.1.4.1.9.10.119.1.1.7.1.5 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table.
                 cPimComponentTable 1.3.6.1.4.1.9.10.119.1.1.8 no-access
The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM-SM router will be a member of exactly one domain. This table also supports, however, routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them.
                     cPimComponentEntry 1.3.6.1.4.1.9.10.119.1.1.8.1 no-access
An entry (conceptual row) in the cPimComponentTable.
                         cPimComponentIndex 1.3.6.1.4.1.9.10.119.1.1.8.1.1 unsigned32 no-access
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a cPimComponentIndex value of 1.
                         cPimComponentBSRAddrType 1.3.6.1.4.1.9.10.119.1.1.8.1.2 inetaddresstype read-only
Type of Inet address presented in cPimComponentBSRAddress.
                         cPimComponentBSRAddress 1.3.6.1.4.1.9.10.119.1.1.8.1.3 inetaddress read-only
The IP address of the bootstrap router (BSR) for the local PIM region.
                         cPimComponentBSRExpiryTime 1.3.6.1.4.1.9.10.119.1.1.8.1.4 timeticks read-only
The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time until it may accept an RP-Set message from a lower candidate BSR.
                         cPimComponentCRPHoldTime 1.3.6.1.4.1.9.10.119.1.1.8.1.5 unsigned32 read-only
The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.
                         cPimComponentStatus 1.3.6.1.4.1.9.10.119.1.1.8.1.6 rowstatus read-only
The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.
         cPimMIBConformance 1.3.6.1.4.1.9.10.119.2
             cPimMIBCompliances 1.3.6.1.4.1.9.10.119.2.1
                 cPimSparseV2MIBCompliance 1.3.6.1.4.1.9.10.119.2.1.1
The compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB.
                 cPimDenseV2MIBCompliance 1.3.6.1.4.1.9.10.119.2.1.2
The compliance statement for routers running PIM Dense Mode and implementing the PIM MIB.
             cPimMIBGroups 1.3.6.1.4.1.9.10.119.2.2
                 cPimNotificationGroup 1.3.6.1.4.1.9.10.119.2.2.1
A collection of notifications for signaling important PIM events.
                 cPimV2MIBGroup 1.3.6.1.4.1.9.10.119.2.2.2
A collection of objects to support management of PIM Sparse Mode (version 2) routers.
                 cPimDenseV2MIBGroup 1.3.6.1.4.1.9.10.119.2.2.3
A collection of objects to support management of PIM Dense Mode (version 2) routers.
                 cPimV2CRPMIBGroup 1.3.6.1.4.1.9.10.119.2.2.4
A collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP.
                 cPimNextHopGroup 1.3.6.1.4.1.9.10.119.2.2.5
A collection of optional objects to provide per-next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tree walk, but the information in this group can be extremely useful in tracking down multicast connectivity problems.
                 cPimAssertGroup 1.3.6.1.4.1.9.10.119.2.2.6
A collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some implementations may already keep this information and make it available. These objects can also be very useful in debugging connectivity or duplicate packet problems, especially if the assert winner does not support the PIM and IP Multicast MIBs.