CISCO-IETF-IP-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-IETF-IP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoIetfIpMIB 1.3.6.1.4.1.9.10.86
The MIB module for managing IP and ICMP implementations, but excluding the management of IP routes.
       ciscoIetfIpMIBObjects 1.3.6.1.4.1.9.10.86.1
           cIp 1.3.6.1.4.1.9.10.86.1.1
               cIpAddressPfxTable 1.3.6.1.4.1.9.10.86.1.1.1 no-access
Inet prefix table.
                   cIpAddressPfxEntry 1.3.6.1.4.1.9.10.86.1.1.1.1 no-access
Inet prefix entry.
                       cIpAddressPfxIfIndex 1.3.6.1.4.1.9.10.86.1.1.1.1.1 interfaceindex no-access
The interface on which this prefix is configured.
                       cIpAddressPfxType 1.3.6.1.4.1.9.10.86.1.1.1.1.2 inetaddresstype no-access
The address type of cIpAddressPfxPfx. Only IPv4 and IPv6 addresses are expected.
                       cIpAddressPfxPfx 1.3.6.1.4.1.9.10.86.1.1.1.1.3 inetaddress no-access
The address prefix. Bits after cIpAddressPfxLength must be zero.
                       cIpAddressPfxLength 1.3.6.1.4.1.9.10.86.1.1.1.1.4 inetaddressprefixlength no-access
The prefix length associated with this prefix.
                       cIpAddressPfxOrigin 1.3.6.1.4.1.9.10.86.1.1.1.1.5 integer read-only
The origin of this prefix. manual(2) indicates a prefix that was manually configured. wellknown(3) indicates a well-known prefix, e.g. 169.254/16 for IPv4 autoconfiguration or fe80::/10 for IPv6 link-local addresses. dhcp(4) indicates a prefix that was assigned by a DHCP server. routeradv(5) indicates a prefix learned from a router advertisement. Enumeration: 'wellknown': 3, 'other': 1, 'manual': 2, 'routeradv': 5, 'dhcp': 4.
                       cIpAddressPfxOnLinkFlag 1.3.6.1.4.1.9.10.86.1.1.1.1.6 truthvalue read-only
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
                       cIpAddressPfxAutonomousFlag 1.3.6.1.4.1.9.10.86.1.1.1.1.7 truthvalue read-only
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
                       cIpAddressPfxAdvPfdLifetime 1.3.6.1.4.1.9.10.86.1.1.1.1.8 unsigned32 read-only
The length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
                       cIpAddressPfxAdvValidLifetime 1.3.6.1.4.1.9.10.86.1.1.1.1.9 unsigned32 read-only
The length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
               cIpAddressTable 1.3.6.1.4.1.9.10.86.1.1.2 no-access
Inet address table.
                   cIpAddressEntry 1.3.6.1.4.1.9.10.86.1.1.2.1 no-access
Inet addr entry.
                       cIpAddressAddrType 1.3.6.1.4.1.9.10.86.1.1.2.1.1 inetaddresstype no-access
The address type of cIpAddressAddr.
                       cIpAddressAddr 1.3.6.1.4.1.9.10.86.1.1.2.1.2 inetaddress no-access
The IP address to which this entry's addressing information pertains.
                       cIpAddressIfIndex 1.3.6.1.4.1.9.10.86.1.1.2.1.3 interfaceindex read-only
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
                       cIpAddressType 1.3.6.1.4.1.9.10.86.1.1.2.1.4 integer read-only
The type of address. broadcast(3) is not a valid value for IPv6 addresses. Enumeration: 'unicast': 1, 'broadcast': 3, 'anycast': 2.
                       cIpAddressPrefix 1.3.6.1.4.1.9.10.86.1.1.2.1.5 rowpointer read-only
A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row.
                       cIpAddressOrigin 1.3.6.1.4.1.9.10.86.1.1.2.1.6 integer read-only
The origin of the address. manual(2) indicates that the address was manually configured. wellknown(3) indicates an address constructed from a well-known value, e.g. an IANA-assigned anycast address. dhcp(4) indicates an address that was assigned to this system by a DHCP server. linklayer(5) indicates an address created by IPv6 stateless autoconfiguration. random(6) indicates an address chosen by random, e.g. an IPv4 address within 169.254/16, or an RFC 3041 privacy address. Enumeration: 'random': 6, 'manual': 2, 'other': 1, 'dhcp': 4, 'wellknown': 3, 'linklayer': 5.
                       cIpAddressStatus 1.3.6.1.4.1.9.10.86.1.1.2.1.7 integer read-only
Address status. The preferred(1) state indicates that this is a valid address that can appear as the destination or source address of a packet. The deprecated(2) state indicates that this is a valid but deprecated address that should no longer be used as a source address in new communications, but packets addressed to such an address are processed as expected. The invalid(3) state indicates that this is not valid address which should not appear as the destination or source address of a packet. The inaccessible(4) state indicates that the address is not accessible because the interface to which this address is assigned is not operational. The tentative(6) state indicates the uniqueness of the address on the link is being verified. The duplicate(7) state indicates the address has been determined to be non-unique on the link and so must not be used. In the absence of other information, an IPv4 address is always preferred(1). Enumeration: 'tentative': 6, 'deprecated': 2, 'inaccessible': 4, 'invalid': 3, 'duplicate': 7, 'preferred': 1, 'unknown': 5.
               cInetNetToMediaTable 1.3.6.1.4.1.9.10.86.1.1.3 no-access
The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
                   cInetNetToMediaEntry 1.3.6.1.4.1.9.10.86.1.1.3.1 no-access
Each entry contains one IP address to `physical' address equivalence.
                       cInetNetToMediaNetAddressType 1.3.6.1.4.1.9.10.86.1.1.3.1.1 inetaddresstype no-access
The type of cInetNetToMediaNetAddress.
                       cInetNetToMediaNetAddress 1.3.6.1.4.1.9.10.86.1.1.3.1.2 inetaddress no-access
The IP Address corresponding to the media-dependent `physical' address.
                       cInetNetToMediaPhysAddress 1.3.6.1.4.1.9.10.86.1.1.3.1.3 physaddress read-only
The media-dependent `physical' address.
                       cInetNetToMediaLastUpdated 1.3.6.1.4.1.9.10.86.1.1.3.1.4 timestamp read-only
The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
                       cInetNetToMediaType 1.3.6.1.4.1.9.10.86.1.1.3.1.5 integer read-only
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cInetNetToMediaTable. That is, it effectively disassociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant cInetNetToMediaType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. Enumeration: 'static': 4, 'other': 1, 'dynamic': 3, 'invalid': 2, 'local': 5.
                       cInetNetToMediaState 1.3.6.1.4.1.9.10.86.1.1.3.1.6 integer read-only
The Neighbor Unreachability Detection [3] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (e.g. for IPv4), this object is always unknown(6). Enumeration: 'unknown': 6, 'probe': 4, 'invalid': 5, 'delay': 3, 'reachable': 1, 'stale': 2, 'incomplete': 7.
               cIpv6ScopeIdTable 1.3.6.1.4.1.9.10.86.1.1.4 no-access
The table used to describe IPv6 unicast and multicast scope zones.
                   cIpv6ScopeIdEntry 1.3.6.1.4.1.9.10.86.1.1.4.1 no-access
Each entry contains the list of scope identifiers on a given interface.
                       cIpv6ScopeIdIfIndex 1.3.6.1.4.1.9.10.86.1.1.4.1.1 interfaceindex no-access
The interface to which these scopes belong.
                       cIpv6ScopeIdLinkLocal 1.3.6.1.4.1.9.10.86.1.1.4.1.2 scopeid read-only
The Scope Identifier for the link-local scope on this interface.
                       cIpv6ScopeIdSubnetLocal 1.3.6.1.4.1.9.10.86.1.1.4.1.3 scopeid read-only
The Scope Identifier for the subnet-local scope on this interface.
                       cIpv6ScopeIdAdminLocal 1.3.6.1.4.1.9.10.86.1.1.4.1.4 scopeid read-only
The Scope Identifier for the admin-local scope on this interface.
                       cIpv6ScopeIdSiteLocal 1.3.6.1.4.1.9.10.86.1.1.4.1.5 scopeid read-only
The Scope Identifier for the site-local scope on this interface.
                       cIpv6ScopeId6 1.3.6.1.4.1.9.10.86.1.1.4.1.6 scopeid read-only
The Scope Identifier for scope 6 on this interface.
                       cIpv6ScopeId7 1.3.6.1.4.1.9.10.86.1.1.4.1.7 scopeid read-only
The Scope Identifier for scope 7 on this interface.
                       cIpv6ScopeIdOrganizationLocal 1.3.6.1.4.1.9.10.86.1.1.4.1.8 scopeid read-only
The Scope Identifier for the orgainzation-local scope on this interface.
                       cIpv6ScopeId9 1.3.6.1.4.1.9.10.86.1.1.4.1.9 scopeid read-only
The Scope Identifier for scope 9 on this interface.
                       cIpv6ScopeIdA 1.3.6.1.4.1.9.10.86.1.1.4.1.10 scopeid read-only
The Scope Identifier for scope A on this interface.
                       cIpv6ScopeIdB 1.3.6.1.4.1.9.10.86.1.1.4.1.11 scopeid read-only
The Scope Identifier for scope B on this interface.
                       cIpv6ScopeIdC 1.3.6.1.4.1.9.10.86.1.1.4.1.12 scopeid read-only
The Scope Identifier for scope C on this interface.
                       cIpv6ScopeIdD 1.3.6.1.4.1.9.10.86.1.1.4.1.13 scopeid read-only
The Scope Identifier for scope D on this interface.
           cIpv6 1.3.6.1.4.1.9.10.86.1.2
               cIpv6Forwarding 1.3.6.1.4.1.9.10.86.1.2.1 integer read-write
The indication of whether this entity is acting as an IPv6 router in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). Enumeration: 'forwarding': 1, 'notForwarding': 2.
               cIpv6DefaultHopLimit 1.3.6.1.4.1.9.10.86.1.2.2 integer read-write
The default value inserted into the Hop Limit field of the IPv6 header of datagrams originated at this entity, whenever a Hop Limit value is not supplied by the transport layer protocol.
               cIpv6InterfaceTable 1.3.6.1.4.1.9.10.86.1.2.3 no-access
The table containing per-interface IPv6-specific information.
                   cIpv6InterfaceEntry 1.3.6.1.4.1.9.10.86.1.2.3.1 no-access
An entry containing IPv6-specific information for a given interface.
                       cIpv6InterfaceIfIndex 1.3.6.1.4.1.9.10.86.1.2.3.1.1 interfaceindex no-access
The interface for which this row contains IPv6-specific information.
                       cIpv6InterfaceEffectiveMtu 1.3.6.1.4.1.9.10.86.1.2.3.1.2 unsigned32 read-only
The size of the largest IPv6 packet which can be sent/received on the interface, specified in octets.
                       cIpv6InterfaceReasmMaxSize 1.3.6.1.4.1.9.10.86.1.2.3.1.3 unsigned32 read-only
The size of the largest IPv6 datagram which this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface.
                       cIpv6InterfaceIdentifier 1.3.6.1.4.1.9.10.86.1.2.3.1.4 ipv6addrifidentifier read-write
The Interface Identifier for this interface that is (at least) unique on the link this interface is attached to. The Interface Identifier is combined with an address prefix to form an interface address. By default, the Interface Identifier is autoconfigured according to the rules of the link type this interface is attached to.
                       cIpv6InterfaceIdentifierLength 1.3.6.1.4.1.9.10.86.1.2.3.1.5 integer read-write
The length of the Interface Identifier in bits.
                       cIpv6InterfacePhysicalAddress 1.3.6.1.4.1.9.10.86.1.2.3.1.6 physaddress read-only
The interface's physical address. For example, for an IPv6 interface attached to an 802.x link, this object normally contains a MAC address. Note that in some cases this address may differ from the address of the interface's protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
           cIcmp 1.3.6.1.4.1.9.10.86.1.3
               cInetIcmpTable 1.3.6.1.4.1.9.10.86.1.3.1 no-access
The table of generic ICMP counters. These counters may be kept per-interface and/or system-wide.
                   cInetIcmpEntry 1.3.6.1.4.1.9.10.86.1.3.1.1 no-access
A conceptual row in the inetIcmpTable. A row with an inetIcmpIfIndex value of zero indicates a system-wide value; a row with a non-zero inetIcmpIfIndex indicates an interface-specific value. A system may provide both system-wide and interface-specific values, in which case it is important to note that the system-wide value may not be equal to the sum of the interface-specific value across all interfaces due to e.g. dynamic interface creation/deletion.
                       cInetIcmpAFType 1.3.6.1.4.1.9.10.86.1.3.1.1.1 inetaddresstype no-access
The IP address family of the statistics.
                       cInetIcmpIfIndex 1.3.6.1.4.1.9.10.86.1.3.1.1.2 interfaceindexorzero no-access
The ifindex of the interface, or zero for system-wide stats.
                       cInetIcmpInMsgs 1.3.6.1.4.1.9.10.86.1.3.1.1.3 counter32 read-only
The total number of ICMP messages which the entity received. Note that this counter includes all those counted by cInetIcmpInErrors.
                       cInetIcmpInErrors 1.3.6.1.4.1.9.10.86.1.3.1.1.4 counter32 read-only
The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
                       cInetIcmpOutMsgs 1.3.6.1.4.1.9.10.86.1.3.1.1.5 counter32 read-only
The total number of ICMP messages which the entity received. Note that this counter includes all those counted by inetIcmpOutErrors.
                       cInetIcmpOutErrors 1.3.6.1.4.1.9.10.86.1.3.1.1.6 counter32 read-only
The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
               cInetIcmpMsgTable 1.3.6.1.4.1.9.10.86.1.3.2 no-access
The table of per-message ICMP counters. These counters may be kept per-interface and/or system-wide.
                   cInetIcmpMsgEntry 1.3.6.1.4.1.9.10.86.1.3.2.1 no-access
A conceptual row in the inetIcmpMsgTable. A row with an inetIcmpMsgIfIndex value of zero indicates a system-wide value; a row with a non-zero cInetIcmpMsgIfIndex indicates an interface-specific value. A system may provide both system-wide and interface-specific values, in which case it is important to note that the system-wide value may not be equal to the sum of the interface-specific values across all interfaces due to e.g. dynamic interface creation/deletion. If the system keeps track of individual ICMP code values (e.g. destination unreachable, code administratively prohibited), it creates several rows for each inetIcmpMsgType, each with an appropriate value of cInetIcmpMsgCode. A row with the special value of cInetIcmpMsgCode, 256, counts all packets with type cInetIcmpMsgType that aren't counted in rows with a value of cInetIcmpMsgCode other than 256.
                       cInetIcmpMsgAFType 1.3.6.1.4.1.9.10.86.1.3.2.1.1 inetaddresstype no-access
The IP address family of the statistics.
                       cInetIcmpMsgIfIndex 1.3.6.1.4.1.9.10.86.1.3.2.1.2 interfaceindexorzero no-access
The ifindex of the interface, or zero for system-wide stats.
                       cInetIcmpMsgType 1.3.6.1.4.1.9.10.86.1.3.2.1.3 integer32 no-access
The ICMP type field of the message type being counted by this row.
                       cInetIcmpMsgCode 1.3.6.1.4.1.9.10.86.1.3.2.1.4 integer32 no-access
The ICMP code field of the message type being counted by this row, or the special value 256 if no specific ICMP code is counted by this row.
                       cInetIcmpMsgInPkts 1.3.6.1.4.1.9.10.86.1.3.2.1.5 counter32 read-only
The number of input packets for this AF, ifindex, type, code.
                       cInetIcmpMsgOutPkts 1.3.6.1.4.1.9.10.86.1.3.2.1.6 counter32 read-only
The number of output packets for this AF, ifindex, type, code.
       ciscoIpMIBConformance 1.3.6.1.4.1.9.10.86.2
           ciscoIpMIBCompliances 1.3.6.1.4.1.9.10.86.2.1
               ciscoIpMIBCompliance 1.3.6.1.4.1.9.10.86.2.1.1
The compliance statement for systems which implement IPv6 OR IPv4.
           ciscoIpMIBGroups 1.3.6.1.4.1.9.10.86.2.2
               ciscoIpAddressPfxGroup 1.3.6.1.4.1.9.10.86.2.2.1
The ip version independent address prefix group of entries providing for basic management of IP prefixes.
               ciscoIpAddressGroup 1.3.6.1.4.1.9.10.86.2.2.2
The ip version independent address group of entries providing for basic management of IP addresses.
               ciscoInetNetToMediaGroup 1.3.6.1.4.1.9.10.86.2.2.3
The group of entries providing IP address to physical address mapping.
               ciscoInetIcmpGroup 1.3.6.1.4.1.9.10.86.2.2.4
The group of entries providing version independent per-interface ICMP specific counters.
               ciscoInetIcmpMsgGroup 1.3.6.1.4.1.9.10.86.2.2.5
The group of entries providing version independent per-interface ICMP msg type specific counters.
               ciscoIpv6GeneralGroup 1.3.6.1.4.1.9.10.86.2.2.6
The IPv6 group of objects providing for basic management of IPv6 entities.
               ciscoIpv6InterfaceGroup 1.3.6.1.4.1.9.10.86.2.2.7
The IPv6 group of objects providing IPv6 interface specific statistics.
               ciscoIpv6ScopeGroup 1.3.6.1.4.1.9.10.86.2.2.8
The group of objects for managing IPv6 scope zones.