CISCO-IETF-DOT11-QOS-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-IETF-DOT11-QOS-EXT-MIB
Download as:   
SNMPv2-CONF, CISCO-IETF-DOT11-QOS-MIB, IF-MIB, CISCO-WLAN-VLAN-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoIetfDot11QosExtMIB 1.3.6.1.4.1.9.10.90
This MIB module provides network management support for QoS on IEEE 802.11 wireless LAN devices. This MIB is an extension to QoS MIB defined in IEEE 802.11E standard.
       ciscoIetfDot11QosExtMIBNotifs 1.3.6.1.4.1.9.10.90.0
           ciscoIetfDot11QosExtChangeNotif 1.3.6.1.4.1.9.10.90.0.1
This ciscoIetfDot11QosExtChangeNotif notification will be sent when the QoS configuration in the cid11QosExtIfConfigTable or the cid11QosConfigTable defined in the CISCO-IETF-DOT11-QOS-MIB are changed. The object cid11TrafficPriority defined in the cid11QosConfigTable specifies the traffic priority of the configuration that changed. The sending of these notifications can be enabled or disabled via the cid11QosExtNotifEnabled object.
       ciscoIetfDot11QosExtMIBObjects 1.3.6.1.4.1.9.10.90.1
           cid11QosExtConfig 1.3.6.1.4.1.9.10.90.1.1
               cid11QosExtConfigTable 1.3.6.1.4.1.9.10.90.1.1.1 no-access
This table contains the basic set of attributes to configure QoS for a wireless LAN device. This table has a sparse dependent relationship with the ifTable. Each IEEE 802.11 wireless interface has a set of configuration parameters for each IP network traffic category. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
                   cid11QosExtConfigEntry 1.3.6.1.4.1.9.10.90.1.1.1.1 no-access
Each entry contains parameters to configure traffic control on an IEEE 802.11 radio interface.
                       cid11QosExtBackoffOffset 1.3.6.1.4.1.9.10.90.1.1.1.1.1 unsigned32 read-write
This specifies the offset of the radio backoff from the transmission media for this traffic category. The backoff interval of a radio is calculated from a pseudo random integer drawn from a uniform distribution over the interval determined by the maximum and minimum of the contention window.
                       cid11QosExtMaxRetry 1.3.6.1.4.1.9.10.90.1.1.1.1.2 unsigned32 read-write
This specifies the number of times the radio retries for a particular transmission if there is a collision for the media.
               cid11QosExtIfConfigTable 1.3.6.1.4.1.9.10.90.1.1.2 no-access
This table contains the attributes indicating QoS support information on the IEEE 802.11 radio interfaces. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
                   cid11QosExtIfConfigEntry 1.3.6.1.4.1.9.10.90.1.1.2.1 no-access
Each entry contains attributes to configure QoS for an IEEE 802.11 interface.
                       cid11QosExtOptionEnabled 1.3.6.1.4.1.9.10.90.1.1.2.1.1 truthvalue read-only
This object indicates if QoS is enabled on this IEEE 802.11 network interface. If it is 'true', QoS queueing is on and traffic is prioritized according to traffic categories. It it is 'false', there is no QoS queueing and traffic is not prioritized.
               cid11QosExtVlanTable 1.3.6.1.4.1.9.10.90.1.1.3 no-access
This table contains attributes for traffic classification of VLANs. This table has a one-to-one dependent relationship to the cwvlWlanVlanTable in the CISCO-WLAN-VLAN-MIB.
                   cid11QosExtVlanEntry 1.3.6.1.4.1.9.10.90.1.1.3.1 no-access
Each entry includes parameters determining the class of service (category) of the traffic and QoS configuration on the VLAN.
                       cid11QosExtVlanClassOfService 1.3.6.1.4.1.9.10.90.1.1.3.1.1 cid11qostrafficcategory read-only
This is the class of service classification to the traffic transmitting on this VLAN. The class of service determines the priority of the traffic. The default VLAN for voice traffic is '4095', and the default service classification is 'interactiveVoice'. The classification on the VLAN '4095' cannot be modified by the network management system. The service classification on all other VLANs are 'bestEffort'.
           cid11QosExtQueue 1.3.6.1.4.1.9.10.90.1.2
               cid11QosExtQueueTable 1.3.6.1.4.1.9.10.90.1.2.1 no-access
This table contains the priority queue configuration attributes for IEEE 802.11 radio interface. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
                   cid11QosExtQueueEntry 1.3.6.1.4.1.9.10.90.1.2.1.1 no-access
A collection of attributes to configure the priority queues for each traffic category on an IEEE 802.11 interface.
                       cid11QosExtQueueQuota 1.3.6.1.4.1.9.10.90.1.2.1.1.1 unsigned32 read-only
This is the current QoS priority queue packet quota for the traffic category on the overall bandwidth. The total quota is 12 and is shared among 8 transmitting queues. The queue with the largest quota value has the largest share of the overall bandwidth of the radio. The quota is allocated by the radio driver dynamically.
           cid11QosExtNotifControl 1.3.6.1.4.1.9.10.90.1.3
               cid11QosExtNotifEnabled 1.3.6.1.4.1.9.10.90.1.3.1 truthvalue read-write
Indicates whether ciscoIetfDot11QosExtChangeNotif notifications will or will not be sent by the agent when the QoS configuration in the cid11QosExtIfConfigTable and cid11QosConfigTable defined in the CISCO-IETF-DOT11-QOS-MIB are changed.
       ciscoIetfDot11QosExtMIBConform 1.3.6.1.4.1.9.10.90.2
           ciscoIetfD11QosExtMIBCompliances 1.3.6.1.4.1.9.10.90.2.1
               ciscoIetfD11QosExtMIBCompliance 1.3.6.1.4.1.9.10.90.2.1.1
The compliance statement for the configuration and status groups.
           ciscoIetfD11QosExtMIBGroups 1.3.6.1.4.1.9.10.90.2.2
               ciscoIetfD11QosExtConfigGroup 1.3.6.1.4.1.9.10.90.2.2.1
Configurations for IEEE 802.11 QoS.
               ciscoIetfD11QosExtQueueGroup 1.3.6.1.4.1.9.10.90.2.2.2
Configurations for IEEE 802.11 QoS queue.
               ciscoIetfD11QosExtNotifConGroup 1.3.6.1.4.1.9.10.90.2.2.3
Notification control for IEEE 802.11 QoS.
               ciscoIetfD11QosExtNotifGroup 1.3.6.1.4.1.9.10.90.2.2.4
This is the notification group for the CISCO-IETF-DOT11-QOS-EXT-MIB.