CISCO-HARDWARE-IP-VERIFY-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO

Home	MIB: CISCO-HARDWARE-IP-VERIFY-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
ciscoHardwareIpVerifyMIB	1.3.6.1.4.1.9.9.804			This MIB module defines management objects for configuration and monitoring of the Intrusion Detection System (IDS) that checks for IP packet verification. The following terms are used throughout the MIB: IDS: Intrusion Detection System CRC: Cyclic Redundancy Check DF: Don't Fragment
ciscoHardwareIpVerifyMIBNotifs	1.3.6.1.4.1.9.9.804.0
ciscoHardwareIpVerifyMIBObjects	1.3.6.1.4.1.9.9.804.1
chivIpVerifyTable	1.3.6.1.4.1.9.9.804.1.1		no-access	A list of IDS check configuration and statistical information for each IP type and each IDS check type on the management device.
chivIpVerifyEntry	1.3.6.1.4.1.9.9.804.1.1.1		no-access	An entry contains the IDS packet check configuration information and the associated counters.
chivIpVerifyCheckIpType	1.3.6.1.4.1.9.9.804.1.1.1.1	integer	no-access	This object indicates the IP address type for IDS packet check. Enumeration: 'ipv4': 1, 'ipv6': 2.
chivIpVerifyCheckTypeName	1.3.6.1.4.1.9.9.804.1.1.1.2	integer	no-access	This object indicates the IDS packet check type which can be configured on the device. Each check type is a specific criteria. Those IP packets that matches the certain criteria are dropped. addressSrcBroadcast(1) Drop the IPv4 packet if the source address is a broadcast IPv4 address. addressSrcMulticast(2) Drop the IPv4 packet if the source address is a multicast IPv4 address. addressDestZero(3) Drop the IPv4 packet if the destination address is 0.0.0.0. addressIdentical(4) Drop the IPv4 packet if the source IPv4 address is identical to destination IPv4 address. addressSrcReserved(5) Drop the IPv4 packet if the source address is a reserved IPv4 address. addressClassE(6) Drop the IPv4 packet if either the source address or destination address is a class E IPv4 address. checksum(7) Drops the IPv4 packet if its checksum is invalid. protocol(8) Drop the IPv4 packet if the packet fragment has an invalid IP protocol number fragment(9) Drop the IPv4 packet if the packet fragment has a nonzero offset and the DF bit is active. lengthMinimum(10) Drop the IPv4 packet if the Ethernet frame length is less than the IP packet length plus four octets (the CRC length). lengthConsistent(11) Drop the IPv4 or IPv6 packet where the Ethernet frame size is greater than or equal to the IP packet length plus the Ethernet header. lengthMaximumFragment(12) Drop the IPv4 or IPv6 packet if the maximum fragment offset is greater than 65536. lengthMaximumUdp(13) Drop the IPv4 or IPv6 packet if the IP payload length is less than the UDP packet length. lengthMaximumTcp(14) Drop the IPv4 or IPv6 packet if the TCP length is greater than the IP payload length. tcpFlags(15) Drop the IPv4 packet if verification of TCP packet header fails. tcpTinyFlags(16) Drop the IPv4 or IPv6 packet if the IP fragment offset is 1, or if the IP fragment offset is 0 and the IP payload length is less than 16. version(17) Drop the IPv4 packet if the Ethertype is not set to 4 (IPv4); and drops the IPv6 packet if the Ethertype is not set to 6 (IPv6). Enumeration: 'lengthMaximumUdp': 13, 'addressClassE': 6, 'addressSrcMulticast': 2, 'protocol': 8, 'lengthMinimum': 10, 'tcpTinyFlags': 16, 'fragment': 9, 'addressIdentical': 4, 'addressSrcBroadcast': 1, 'tcpFlags': 15, 'lengthMaximumFragment': 12, 'lengthConsistent': 11, 'version': 17, 'checksum': 7, 'lengthMaximumTcp': 14, 'addressSrcReserved': 5, 'addressDestZero': 3.
chivIpVerifyCheckStatus	1.3.6.1.4.1.9.9.804.1.1.1.3	integer	read-write	This object specifies the IDS packet check configuration status. Enumeration: 'disabled': 1, 'enabled': 2.
chivIpVerifyPacketsDropped	1.3.6.1.4.1.9.9.804.1.1.1.4	counter64	read-only	This object indicates the number of packets which has been dropped.
ciscoHardwareIpVerifyMIBConform	1.3.6.1.4.1.9.9.804.2
ciscoHardwareIpVerifyMIBCompliances	1.3.6.1.4.1.9.9.804.2.1
ciscoHardwareIpVerifyMIBCompliance	1.3.6.1.4.1.9.9.804.2.1.1			The compliance statement for the CISCO-HARDWARE-IP-VERIFY-MIB.
ciscoHardwareIpVerifyMIBGroups	1.3.6.1.4.1.9.9.804.2.2
ciscoHardwareIpVerifyMIBStatisticGroup	1.3.6.1.4.1.9.9.804.2.2.1			A collection of objects that provides configuration and statistical information for IDS packet check.