CISCO-DLC-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-DLC-SWITCH-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoDlcSwitchMIB 1.3.6.1.4.1.9.9.76
This is the MIB module for objects used to manage FRAS sessions to the endstation. These objects are specific to downstream or enduster sessions only. It does not contain objects supported by the FRAS-HOST MIB which are specific to upstream or host-end sessions.
       ciscoDlcSwitchMIBObjects 1.3.6.1.4.1.9.9.76.1
           frasBnnSdlc 1.3.6.1.4.1.9.9.76.1.1
               frasBnnSdlcConTable 1.3.6.1.4.1.9.9.76.1.1.1 no-access
This table contains mapping information for each SDLC Link Station in a FRAS-BNN to SDLC connection. All entries are derived entirely from the router configuration.
                   frasBnnSdlcConEntry 1.3.6.1.4.1.9.9.76.1.1.1.1 no-access
This table contains the entries defined for a specific SDLC Link Station in a BNN-SDLC configuration.
                       bnnSdlcConAddress 1.3.6.1.4.1.9.9.76.1.1.1.1.1 sdlcaddress no-access
This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
                       bnnSdlcConState 1.3.6.1.4.1.9.9.76.1.1.1.1.2 integer read-only
Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state Enumeration: 'reset': 1, 'xidexchg': 3, 'contacted': 8, 'testSent': 2, 'connrspsent': 7, 'connrqsent': 4, 'connrspwait': 6, 'discwait': 9, 'sigstnwait': 5.
                       bnnSdlcConDlci 1.3.6.1.4.1.9.9.76.1.1.1.1.3 integer32 read-only
The Data Link Connection Identifier used for this particular connection.
                       bnnSdlcConFRInterface 1.3.6.1.4.1.9.9.76.1.1.1.1.4 interfaceindexorzero read-only
This is the Frame-Relay interface which the SDLC Link Station is using to connect to the Host.
                       bnnSdlcConLocalSap 1.3.6.1.4.1.9.9.76.1.1.1.1.5 sap read-only
The Local SAP for this SDLC station's corresponding LLC session to the host.
                       bnnSdlcConRemoteSap 1.3.6.1.4.1.9.9.76.1.1.1.1.6 sap read-only
The Remote SAP for this SDLC station's corresponding LLC session to the host.
           frasBnnLlc 1.3.6.1.4.1.9.9.76.1.2
               frasBnnLlcConTable 1.3.6.1.4.1.9.9.76.1.2.1 no-access
This table contains information for each End Station in a FRAS-BNN to LLC connection. The entries are derived entirely from the router configuration.
                   frasBnnLlcConEntry 1.3.6.1.4.1.9.9.76.1.2.1.1 no-access
This table contains information for a specific End Station's connection state in a BNN-LLC connection.
                       bnnLlcConDeviceMacAddress 1.3.6.1.4.1.9.9.76.1.2.1.1.1 macaddress no-access
This value is the End Station's Local Mac-Address.
                       bnnLlcConLanLocalSap 1.3.6.1.4.1.9.9.76.1.2.1.1.2 sap no-access
The End Station's Local SAP.
                       bnnLlcConLanRemoteSap 1.3.6.1.4.1.9.9.76.1.2.1.1.3 sap no-access
The End Station's Remote SAP.
                       bnnLlcConLanInterface 1.3.6.1.4.1.9.9.76.1.2.1.1.4 interfaceindexorzero read-only
This is the physical interace which the End Station is attached to.
                       bnnLlcConDlci 1.3.6.1.4.1.9.9.76.1.2.1.1.5 integer32 read-only
The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.
                       bnnLlcConState 1.3.6.1.4.1.9.9.76.1.2.1.1.6 integer read-only
Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state Enumeration: 'reset': 1, 'xidexchg': 3, 'contacted': 8, 'testSent': 2, 'connrspsent': 7, 'connrqsent': 4, 'connrspwait': 6, 'discwait': 9, 'sigstnwait': 5.
                       bnnLlcConLocalMacAddress 1.3.6.1.4.1.9.9.76.1.2.1.1.7 macaddress read-only
The Mac-Address configured as the End Station's target or Remote address.
                       bnnLlcConFrLocalSap 1.3.6.1.4.1.9.9.76.1.2.1.1.8 sap read-only
The FRAS router's Local SAP.
                       bnnLlcConFrRemoteSap 1.3.6.1.4.1.9.9.76.1.2.1.1.9 sap read-only
The FRAS router's Remote SAP.
           frasBanSdlc 1.3.6.1.4.1.9.9.76.1.3
               frasBanSdlcConTable 1.3.6.1.4.1.9.9.76.1.3.1 no-access
This table contains information for each SDLC Link Station in a FRAS-BAN to SDLC connection. The entries are derived entirely from the router configuration.
                   frasBanSdlcConEntry 1.3.6.1.4.1.9.9.76.1.3.1.1 no-access
This table contains information for a specific SDLC Link Station in a configured for a BAN connection.
                       banSdlcConLocalInterface 1.3.6.1.4.1.9.9.76.1.3.1.1.1 interfaceindexorzero read-only
This is the physical interface the SDLC Link Stations are connected to.
                       banSdlcConAddress 1.3.6.1.4.1.9.9.76.1.3.1.1.2 sdlcaddress read-only
This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
                       banSdlcConBanDlciMac 1.3.6.1.4.1.9.9.76.1.3.1.1.3 macaddress read-only
The End Station's target or Remote mac-address.
                       banSdlcConDlci 1.3.6.1.4.1.9.9.76.1.3.1.1.4 integer32 read-only
The Data Link Connection Identifier for the corresponding LLC2 session over Frame-Relay to the host.
                       banSdlcConState 1.3.6.1.4.1.9.9.76.1.3.1.1.5 integer read-only
Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state Enumeration: 'reset': 1, 'xidexchg': 3, 'contacted': 8, 'testSent': 2, 'connrspsent': 7, 'connrqsent': 4, 'connrspwait': 6, 'discwait': 9, 'sigstnwait': 5.
                       banSdlcConVmac 1.3.6.1.4.1.9.9.76.1.3.1.1.6 macaddress read-only
The End Station's virtual Mac-Address which is comprised of a TR formatted template and the SDLC Link Station address appended on the last nibble.
                       banSdlcConBniAddress 1.3.6.1.4.1.9.9.76.1.3.1.1.7 macaddress read-only
BNI is Boundary Node Identifier which is the FRAS-BAN connection's Remote address in TR-format. It is by default 4fff.0000.0000
                       banSdlcConFrLocalSap 1.3.6.1.4.1.9.9.76.1.3.1.1.8 sap read-only
The FRAS router's Local SAP.
                       banSdlcConFrRemoteSap 1.3.6.1.4.1.9.9.76.1.3.1.1.9 sap read-only
The FRAS router's Remote SAP.
           frasBanLlc 1.3.6.1.4.1.9.9.76.1.4
               frasBanLlcConTable 1.3.6.1.4.1.9.9.76.1.4.1 no-access
This table contains information for each LAN attached End Station in a FRAS-BAN to LAN connection. The entries are from endstations which have their destination mac-addresses as the BAN-DLCI-MAC address.
                   frasBanLlcConEntry 1.3.6.1.4.1.9.9.76.1.4.1.1 no-access
This table contains information for a specific LAN attached End Station.
                       banLlcEndstnLocalMac 1.3.6.1.4.1.9.9.76.1.4.1.1.1 macaddress read-only
This value is the End Station's Local Mac-Address.
                       banLlcBanDlciMac 1.3.6.1.4.1.9.9.76.1.4.1.1.2 macaddress read-only
This value is the End Station's Remote Mac-Address. It is also the FRAS-BAN connection's Local Mac-Address.
                       banLlcConLocalSap 1.3.6.1.4.1.9.9.76.1.4.1.1.3 sap read-only
The endstation's Local SAP.
                       banLlcConRemoteSap 1.3.6.1.4.1.9.9.76.1.4.1.1.4 sap read-only
The endstation's Remote SAP.
                       banLlcConDlci 1.3.6.1.4.1.9.9.76.1.4.1.1.5 integer32 read-only
The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.
                       banLlcConState 1.3.6.1.4.1.9.9.76.1.4.1.1.6 integer read-only
Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state Enumeration: 'reset': 1, 'xidexchg': 3, 'contacted': 8, 'testSent': 2, 'connrspsent': 7, 'connrqsent': 4, 'connrspwait': 6, 'discwait': 9, 'sigstnwait': 5.
                       banLlcConFrInterface 1.3.6.1.4.1.9.9.76.1.4.1.1.7 interfaceindexorzero read-only
This is the Frame-Relay interface for this particular session.
                       banLlcBniAddress 1.3.6.1.4.1.9.9.76.1.4.1.1.8 macaddress read-only
This value is the FRAS-BAN connection's Target Mac-Address. It is by default 4fff.0000.0000
                       banLlcConFrLocalSap 1.3.6.1.4.1.9.9.76.1.4.1.1.9 sap read-only
The Local SAP of the corresponding LLC2 session over Frame-Relay to the host.
                       banLlcConFrRemoteSap 1.3.6.1.4.1.9.9.76.1.4.1.1.10 sap read-only
The Remote SAP of the corresponding LLC2 session over Frame-Relay to the host.
       ciscoDlcSwitchConformance 1.3.6.1.4.1.9.9.76.2
           ciscoDlcSwitchCompliances 1.3.6.1.4.1.9.9.76.2.1
               ciscoDlcSwitchCoreCompliance 1.3.6.1.4.1.9.9.76.2.1.1
The core compliance statement for all FRAS connections.
           ciscoDlcSwitchGroups 1.3.6.1.4.1.9.9.76.2.2
               frasBnnSdlcGroup 1.3.6.1.4.1.9.9.76.2.2.1
The frasBnnSdlcGroup defines objects which are common to the BNN SDLC of all compliant connections.
               frasBnnLlcGroup 1.3.6.1.4.1.9.9.76.2.2.2
The frasBnnLlcGroup defines objects which are common to the BNN LLC of all compliant connections.
               frasBanSdlcGroup 1.3.6.1.4.1.9.9.76.2.2.3
The frasBanSdlcGroup defines objects which are common to the BAN SDLC of all compliant connections.
               frasBanLlcGroup 1.3.6.1.4.1.9.9.76.2.2.4
The frasBanLlcGroup defines objects which are common to the BAN LLC of all compliant connections.