CISCO-CABLE-IRON-BUS-STAT-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-CABLE-IRON-BUS-STAT-MIB
Download as:   
CISCO-CABLE-ADMISSION-CTRL-MIB, SNMPv2-CONF, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoCableIronBusStatMIB 1.3.6.1.4.1.9.9.821
This is the MIB module for Cable Iron Bus Statistics for DOCSIS-compliant Cable Modem Termination Systems (CMTS). The Statistics of Iron Bus is a software/hardware feature provided in the CMTS so that the CMTS can count statistics of bandwidth usage of Iron Bus when traffic through it. The purpose of cable Iron Bus statistics is to monitor the bandwidth usage of Iron Bus , which CMTS can report warning message when the traffic throughput on Iron Bus overlap the threshold configured. The statistics of Iron Bus also monitor the traffic throughput statistics both ingress and outband Iron Bus with units bytes and packets per second. The statistics of Iron Bus can also configure the threshold and message interval to CMTS.
         ciscoCableIronBusStatMIBNotifs 1.3.6.1.4.1.9.9.821.0
         ciscoCableIronBusStatMIBObjects 1.3.6.1.4.1.9.9.821.1
             ciscoCableIronBusStatTable 1.3.6.1.4.1.9.9.821.1.1 no-access
This table abstracts a sparse matrix of Bandwidth resource utilization thresholds to be monitored by Iron Bus Statistics. The ciscoCableIronBusStatIndex uniquely identifies the physical entity with a set of Iron Bus bandwidth resource utilization thresholds being associated.The physical entities is for Jacket Card slot Number.The agent creates/destroys/modifies an entry whenever the local console affects this configuration.The management application may create/destroy/modify an entry. This entry will exist by default since the Iron Bus Statistics has 90% and 2 minutes configuration by default.
                 ciscoCableIronBusStatEntry 1.3.6.1.4.1.9.9.821.1.1.1 no-access
An entry (conceptual row) in the cableIronBusStatTable.
                     ciscoCableIronBusStatIndex 1.3.6.1.4.1.9.9.821.1.1.1.1 integer32 no-access
This object defines the index of this entry , which should be the slot number of SIP card in CMTS, only support 1,3 currently.
                     ciscoCableIronBusStatFibBandwidth 1.3.6.1.4.1.9.9.821.1.1.1.2 nonzeropercent read-only
This object specifies Iron Bus Fib bandwidth(From Iron Bus) thresholds currently in CMTS being monitored.
                     ciscoCableIronBusStatTibBandwidth 1.3.6.1.4.1.9.9.821.1.1.1.3 nonzeropercent read-only
This object specifies Iron Bus Tib bandwidth(To Iron Bus) thresholds currently in CMTS being monitored.
                     ciscoCableIronBusStatMessageIntervalCurrent 1.3.6.1.4.1.9.9.821.1.1.1.4 integer32 read-write
This object specifies Iron Bus warning message interval currently in CMTS being monitored. which from 0 to 60 minutes. Setting the object to 2 will remove the configuration. Setting the object to 0 will not log any warning message.
                     ciscoCableIronBusStatBandwidthCurrent 1.3.6.1.4.1.9.9.821.1.1.1.5 nonzeropercent read-write
This object specifies Iron Bus bandwidth usage thresholds currently in CMTS being monitored. The following values range from 50 to 100. Setting the object to 90 is remove the configuration and set it to default configuration.
                     ciscoCableIronBusStatMessageIntervalDefault 1.3.6.1.4.1.9.9.821.1.1.1.6 integer32 read-only
This object specifies Iron Bus warning message interval by default. The default value of this object is 2.
                     ciscoCableIronBusStatBandwidthDefault 1.3.6.1.4.1.9.9.821.1.1.1.7 nonzeropercent read-only
This object specifies the default Iron Bus bandwidth usage thresholds in CMTS being monitored. The default value is 90.
                     ciscoCableIronBusStatFibPktsRcv 1.3.6.1.4.1.9.9.821.1.1.1.8 counter64 read-only
This object specifies the Fib received packets per second.
                     ciscoCableIronBusStatFibBytesRcv 1.3.6.1.4.1.9.9.821.1.1.1.9 counter64 read-only
This object specifies the Fib received bytes per second.
                     ciscoCableIronBusStatTibPktsSent 1.3.6.1.4.1.9.9.821.1.1.1.10 counter64 read-only
This object specifies the Fib sent packets per second.
                     ciscoCableIronBusStatTibByteSent 1.3.6.1.4.1.9.9.821.1.1.1.11 counter64 read-only
This object specifies the Fib sent Bytes per second.
                     ciscoCableIronBusStatFibPktsPerSec 1.3.6.1.4.1.9.9.821.1.1.1.12 counter64 read-only
This object specifies the Fib throughput Bytes per second.
                     ciscoCableIronBusStatTibPktPerSec 1.3.6.1.4.1.9.9.821.1.1.1.13 counter64 read-only
This object specifies the Tib throughput Bytes per second.
         ciscoCableIronBusStatMIBConform 1.3.6.1.4.1.9.9.821.2
             ciscoCableIronBusStatMIBCompliances 1.3.6.1.4.1.9.9.821.2.1
                 ciscoCableIronBusStatMIBCompliance 1.3.6.1.4.1.9.9.821.2.1.1
The compliance statement for entities which implement the Cisco Cable Iron Bus Statistics MIB
             ciscoCableIronBusStatMIBGroups 1.3.6.1.4.1.9.9.821.2.2
                 ciscoCableIronBusStatObjectGroup 1.3.6.1.4.1.9.9.821.2.2.1
A collection of objects providing CMTS Iron Bus Statistics being monitored.