CISCO-C8500-REDUNDANCY-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-C8500-REDUNDANCY-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoC8500RedundancyMIB 1.3.6.1.4.1.9.9.105
This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar implementations. The Catalyst 8540 is an ATM switch. It has 13 (or, in some models, 14) slots, of which 2 slots can hold CPU cards, and 3 (or, in some models, 4) slots can hold switch cards. A switch card is one that contains the ATM switching fabric. Two switch cards are combined to operate in 20Gbps switching mode. For CPU cards, 1+1 redundancy is supported. For switch cards, 2+1 redundancy is supported.
         ciscoC8500RedundancyMIBObjects 1.3.6.1.4.1.9.9.105.1
             ccrCpu 1.3.6.1.4.1.9.9.105.1.1
                 ccrCpuTable 1.3.6.1.4.1.9.9.105.1.1.1 no-access
There is an entry in this table for each slot that can hold a CPU card.
                     ccrCpuEntry 1.3.6.1.4.1.9.9.105.1.1.1.1 no-access
Redundancy information for a CPU card.
                         ccrCpuSlotIndex 1.3.6.1.4.1.9.9.105.1.1.1.1.1 redundancyslotindex no-access
Identifies a chassis slot.
                         ccrCpuMode 1.3.6.1.4.1.9.9.105.1.1.1.1.2 redundancymode read-write
The redundancy mode of this CPU card.
                         ccrCpuStatus 1.3.6.1.4.1.9.9.105.1.1.1.1.3 redundancystatus read-only
The operational status of this CPU card.
                 ccrSyncConfigOnSet 1.3.6.1.4.1.9.9.105.1.1.2 bits read-write
The device's running-configuration and startup-configuration both reside on the active CPU card. This object indicates whether these configurations should be copied from the active CPU to the standby CPU whenever they change. It is acceptable to copy either, both, or neither. Bits: 'runningConfig': 0, 'startupConfig': 1.
                 ccrCpuStandbyEnableMode 1.3.6.1.4.1.9.9.105.1.1.3 truthvalue read-write
This object is used to allow or disallow the execution of the enable exec command on the secondary CPU. When set to 'true', the enable exec command can be executed on secondary CPU, and the user may enter enable mode after keying in the password configured. When set to 'false', the enable exec command cannot be executed; thus, no user may enter enabled mode.
                 ccrCpuSwitchoverTime 1.3.6.1.4.1.9.9.105.1.1.4 integer read-only
The time taken for the most recent CPU switchover.
                 ccrForceCounterSync 1.3.6.1.4.1.9.9.105.1.1.5 integer read-write
This object is used to force the synchronization of counters from primary CPU to secondary CPU. It should generally be set just before a controlled Route Processor Switchover. When this object is retrieved, the value 'noop' is returned. When this object is set to 'noop' no operation is performed. Enumeration: 'noop': 2, 'forcesync': 1.
                 ccrIfCounterSyncFreq 1.3.6.1.4.1.9.9.105.1.1.6 integer read-write
This object configures the periodicity of interface counter synchronization from primary CPU to secondary CPU. Setting this object to 0 will disable counter synchronization.
                 ccrVcCounterSyncFreq 1.3.6.1.4.1.9.9.105.1.1.7 integer read-write
This object configures the periodicity of Virtual Circuit (VC) counter synchronization from primary CPU to secondary CPU. Setting this object to 0 will disable counter synchronization.
                 ccrSigCounterSyncEnable 1.3.6.1.4.1.9.9.105.1.1.8 truthvalue read-write
This object configures the synchronization of ATM Signalling Statistics from primary CPU to secondary CPU. When this object is set to 'true', sychronization is enabled. When this object is set to 'false', synchronization is disabled.
             ccrSwitch 1.3.6.1.4.1.9.9.105.1.2
                 ccrSwitchTable 1.3.6.1.4.1.9.9.105.1.2.1 no-access
There is an entry in this table for each slot that can hold a switch card. A 'switch card' is a card that contains the ATM switch fabric.
                     ccrSwitchEntry 1.3.6.1.4.1.9.9.105.1.2.1.1 no-access
Redundancy information for a switch card.
                         ccrSwitchSlotIndex 1.3.6.1.4.1.9.9.105.1.2.1.1.1 redundancyslotindex no-access
Identifies a chassis slot.
                         ccrSwitchMode 1.3.6.1.4.1.9.9.105.1.2.1.1.2 redundancymode read-write
The redundancy mode of this switch card.
                         ccrSwitchStatus 1.3.6.1.4.1.9.9.105.1.2.1.1.3 redundancystatus read-only
The operational status of this switch card.
                 ccrSwitchLastSwitchoverTime 1.3.6.1.4.1.9.9.105.1.2.2 timestamp read-only
The value of sysUpTime at the last switchover of the switch cards. The value is zero if there was no switchover since agent initialization.
                 ccrSwitchLastSwitchoverReason 1.3.6.1.4.1.9.9.105.1.2.3 integer read-only
The reason for the last switch card switchover. The value is none(1) if there was no switchover since agent initialization. Enumeration: 'none': 1, 'notKnown': 2, 'cardRecovered': 5, 'cardRemoved': 6, 'cardInserted': 7, 'userInitiated': 3, 'cardFailed': 4.
                 ccrSwitchBw 1.3.6.1.4.1.9.9.105.1.2.4 integer read-only
The switching capacity (i.e., bandwidth) of the switch fabric. tenGbps(1) - 10 Gigabits/sec twentyGbps(2) - 20 Gigabits/sec. Enumeration: 'twentyGbps': 2, 'tenGbps': 1.
                 ccrDesiredSwitchBw 1.3.6.1.4.1.9.9.105.1.2.5 integer read-write
The desired switching capacity (i.e., bandwidth) of the switch fabric. tenGbps(1) - 10 Gigabits/sec twentyGbps(2) - 20 Gigabits/sec If the value configured by writing to this object is supported by the device, it will be applied at the next reboot. The speed at which the switch fabric is currently operating is reflected by the value of ccrSwitchBw. Enumeration: 'twentyGbps': 2, 'tenGbps': 1.
         ciscoC8500RedundancyMIBNotificationPrefix 1.3.6.1.4.1.9.9.105.2
             ccrMIBNotifications 1.3.6.1.4.1.9.9.105.2.0
                 ccrCpuStatusChange 1.3.6.1.4.1.9.9.105.2.0.1
This notification is generated when the value of ccrCpuStatus changes for a CPU card. The varbind indicates the current status of the affected card.
                 ccrSwitchStatusChange 1.3.6.1.4.1.9.9.105.2.0.2
This notification is generated when the value of ccrSwitchStatus changes for a switch card. The varbind indicates the current status of the affected card.
                 ccrSwitchModeChange 1.3.6.1.4.1.9.9.105.2.0.3
This notification is generated when the value of ccrSwitchMode changes from active(1) to either standby(2) or unused(3) or notPresent(4). The varbind indicates the current mode of the affected card.
         ciscoC8500RedundancyMIBConformance 1.3.6.1.4.1.9.9.105.3
             ciscoC8500RedundancyMIBCompliances 1.3.6.1.4.1.9.9.105.3.1
                 ciscoC8500RedundancyMIBCompliance 1.3.6.1.4.1.9.9.105.3.1.1
The compliance statement for Cisco agents which implement the CISCO-C8500-REDUNDANCY-MIB.
                 ciscoC8500RedundancyMIBComplianceRev1 1.3.6.1.4.1.9.9.105.3.1.2
The compliance statement to include objects related to the redundancy features like enable password on secondary, switchover duration and counter.
             ciscoC8500RedundancyMIBGroups 1.3.6.1.4.1.9.9.105.3.2
                 ccrCpuMibGroup 1.3.6.1.4.1.9.9.105.3.2.1
A collection of objects providing the ability to manage CPU card redundancy.
                 ccrSwitchMibGroup 1.3.6.1.4.1.9.9.105.3.2.2
A collection of objects providing the ability to manage Switch Fabric card redundancy.
                 ccrNotificationsGroup 1.3.6.1.4.1.9.9.105.3.2.3
A collection of notifications related to redundancy.
                 ccrCpuMibGroup1 1.3.6.1.4.1.9.9.105.3.2.4
A collection of objects providing the ability to manage CPU card redundancy and redundancy feature for counter, enable password on secondary and switchover duration.