CISCO-ATM-SERVICE-REGISTRY-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ATM-SERVICE-REGISTRY-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoAtmServiceRegistryMIB 1.3.6.1.4.1.9.9.50
A MIB module to allow an NMS to monitor and configure the information which an ATM switch makes available via the ILMI's Service Registry Table.
       ciscoAtmServiceRegistryMIBObjects 1.3.6.1.4.1.9.9.50.1
           asrSrvcRegTable 1.3.6.1.4.1.9.9.50.1.1 no-access
The table implemented by an ATM switch to allow monitoring and control of the ATM addresses of registered services which it makes avaiable to ATM end-systems via the ILMI across its UNIs.
               asrSrvcRegEntry 1.3.6.1.4.1.9.9.50.1.1.1 no-access
Information about a single service provider that is to be made available to the user-side of one or more ATM UNIs. An entry, for which asrSrvcRegPort has a non-zero value, is a specific assignment to that UNI; an entry for which asrSrvcRegPort is zero applies to all UNIs for which this table contains no specific assignments.
                   asrSrvcRegPort 1.3.6.1.4.1.9.9.50.1.1.1.1 interfaceindexorzero no-access
Either the value 0, or the ifIndex value of an the ATM Interface. A row for which this object has a non-zero value is a specific assignment to that UNI; a row for which this object is zero applies to all UNIs for which this table contains no specific assignments. Some switches may only support this object with the value of zero.
                   asrSrvcRegServiceID 1.3.6.1.4.1.9.9.50.1.1.1.2 object identifier no-access
The service identifier which uniquely identifies the type of service at the address given by the corresponding value of asrSrvcRegATMAddress. Specific values for this identifier are defined in the ILMI specification (e.g., asrSrvcRegLecs) or elsewhere.
                   asrSrvcRegATMAddress 1.3.6.1.4.1.9.9.50.1.1.1.3 atmaddr read-only
An ATM address to which the ATM end-system on this UNI can attempt to establish a connection for the service.
                   asrSrvcRegAddressIndex 1.3.6.1.4.1.9.9.50.1.1.1.4 integer32 no-access
An arbitrary integer to differentiate multiple rows containing different ATM addresses for the same service on the same UNI.
                   asrSrvcRegParm1 1.3.6.1.4.1.9.9.50.1.1.1.5 octet string read-only
An octet string used according to the value of asrSrvcRegServiceID.
                   asrSrvcRegRowStatus 1.3.6.1.4.1.9.9.50.1.1.1.6 rowstatus read-only
The status of this row. No object in the row can be modified while the value of this object is 'active'.
       asrSrvcRegMIBConformance 1.3.6.1.4.1.9.9.50.3
           asrSrvcRegMIBCompliances 1.3.6.1.4.1.9.9.50.3.1
               asrSrvcRegMIBCompliance 1.3.6.1.4.1.9.9.50.3.1.1
The compliance statement for ATM switches which implement the Cisco Service Registry MIB
           asrSrvcRegMIBGroups 1.3.6.1.4.1.9.9.50.3.2
               asrSrvcRegMIBGroup 1.3.6.1.4.1.9.9.50.3.2.1
A collection of objects providing monitoring and control of ATM addresses of services which an ATM switch is to make available via the ILMI.