CISCO-ATM-QOS-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ATM-QOS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ATM-FORUM-TC-MIB, CISCO-SMI, ATM-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoAtmQosMIB 1.3.6.1.4.1.9.9.279
The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a per-VP basis 3. Per-VC queuing/buffering Although the initial requirements of the MIB are driven to support the GSR TAZ line card, CISCO-ATM-QOS-MIB is designed as a generic MIB to support ATM interfaces across all platforms. Here are the tables defined in this MIB: ciscoAtmQosVccTable - to provide information on traffic shaping on a per-VC basis. ciscoAtmQosVpcTable - to provide information on traffic shaping on a per-VP basis. ciscoAtmQosVcQueuingTable ciscoAtmQosVcQueuingClassTable - to provide information on per-VC queuing/buffering.
         ciscoAtmQosMIBNotifs 1.3.6.1.4.1.9.9.279.0
         ciscoAtmQosMIBObjects 1.3.6.1.4.1.9.9.279.1
             caqVccParams 1.3.6.1.4.1.9.9.279.1.1
                 caqVccParamsTable 1.3.6.1.4.1.9.9.279.1.1.1 no-access
This table is defined to provide QoS information for each active ATM VC existing on the interface.
                     caqVccParamsEntry 1.3.6.1.4.1.9.9.279.1.1.1.1 no-access
This list contains the ATM QoS parameters provided by ciscoAtmQosVccEntry.
                         caqVccParamsType 1.3.6.1.4.1.9.9.279.1.1.1.1.1 atmservicecategory read-write
The service category of this virtual circuit connection.
                         caqVccParamsPcrIn0 1.3.6.1.4.1.9.9.279.1.1.1.1.2 unsigned32 read-write
Input Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
                         caqVccParamsPcrIn01 1.3.6.1.4.1.9.9.279.1.1.1.1.3 unsigned32 read-write
Number of OAM F5 end to end loopback cells sent through the VCC.
                         caqVccParamsPcrOut0 1.3.6.1.4.1.9.9.279.1.1.1.1.4 unsigned32 read-write
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
                         caqVccParamsPcrOut01 1.3.6.1.4.1.9.9.279.1.1.1.1.5 unsigned32 read-write
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 1 (clp01).
                         caqVccParamsScrIn0 1.3.6.1.4.1.9.9.279.1.1.1.1.6 unsigned32 read-write
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
                         caqVccParamsScrIn01 1.3.6.1.4.1.9.9.279.1.1.1.1.7 unsigned32 read-write
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
                         caqVccParamsScrOut0 1.3.6.1.4.1.9.9.279.1.1.1.1.8 unsigned32 read-write
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
                         caqVccParamsScrOut01 1.3.6.1.4.1.9.9.279.1.1.1.1.9 unsigned32 read-write
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
                         caqVccParamsBcsIn0 1.3.6.1.4.1.9.9.279.1.1.1.1.10 unsigned32 read-write
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
                         caqVccParamsBcsIn01 1.3.6.1.4.1.9.9.279.1.1.1.1.11 unsigned32 read-write
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
                         caqVccParamsBcsOut0 1.3.6.1.4.1.9.9.279.1.1.1.1.12 unsigned32 read-write
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
                         caqVccParamsBcsOut01 1.3.6.1.4.1.9.9.279.1.1.1.1.13 unsigned32 read-write
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
                         caqVccParamsInheritLevel 1.3.6.1.4.1.9.9.279.1.1.1.1.14 vcparamconfiglocation read-only
The source of configuration for peak cell rate.
                         caqVccParamsMcrIn 1.3.6.1.4.1.9.9.279.1.1.1.1.15 unsigned32 read-write
Input Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
                         caqVccParamsMcrOut 1.3.6.1.4.1.9.9.279.1.1.1.1.16 unsigned32 read-write
Output Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
                         caqVccParamsInvRdf 1.3.6.1.4.1.9.9.279.1.1.1.1.17 unsigned32 read-write
Inverse of rate decrease factor.
                         caqVccParamsInvRif 1.3.6.1.4.1.9.9.279.1.1.1.1.18 unsigned32 read-write
Inverse of rate increase factor.
                         caqVccParamsRfl 1.3.6.1.4.1.9.9.279.1.1.1.1.19 vcparamconfiglocation read-only
The source of configuration for rate factor.
                         caqVccParamsCdv 1.3.6.1.4.1.9.9.279.1.1.1.1.20 unsigned32 read-only
Cell delay variation.
                         caqVccParamsCdvt 1.3.6.1.4.1.9.9.279.1.1.1.1.21 unsigned32 read-write
Cell delay variation tolerance.
                         caqVccParamsIcr 1.3.6.1.4.1.9.9.279.1.1.1.1.22 unsigned32 read-write
Initial cell rate.
                         caqVccParamsTbe 1.3.6.1.4.1.9.9.279.1.1.1.1.23 unsigned32 read-write
Transient buffer exposure.
                         caqVccParamsFrtt 1.3.6.1.4.1.9.9.279.1.1.1.1.24 unsigned32 read-write
Fixed round-trip time.
                         caqVccParamsNrm 1.3.6.1.4.1.9.9.279.1.1.1.1.25 unsigned32 read-write
Maximum number of tx cells for each forward rm cell.
                         caqVccParamsInvTrm 1.3.6.1.4.1.9.9.279.1.1.1.1.26 unsigned32 read-write
Maximum time between forward rm cells.
                         caqVccParamsInvCdf 1.3.6.1.4.1.9.9.279.1.1.1.1.27 unsigned32 read-write
Inverse of cutoff decrease factor.
                         caqVccParamsAdtf 1.3.6.1.4.1.9.9.279.1.1.1.1.28 unsigned32 read-write
Allowed cell rate decrease time factor.
             caqVpcParams 1.3.6.1.4.1.9.9.279.1.2
                 caqVpcParamsTable 1.3.6.1.4.1.9.9.279.1.2.1 no-access
This table is defined to provide QoS information for each active ATM VP existing on the interface.
                     caqVpcParamsEntry 1.3.6.1.4.1.9.9.279.1.2.1.1 no-access
This list contains the ATM QoS parameters provided by ciscoAtmQosVpcEntry.
                         caqVpcParamsVpState 1.3.6.1.4.1.9.9.279.1.2.1.1.1 vpstate read-only
VP state of the current permanent virtual path.
                         caqVpcParamsPeakRate 1.3.6.1.4.1.9.9.279.1.2.1.1.2 unsigned32 read-only
Maximum rate in kbps at which the associated permanent virtual path can transmit data.
                         caqVpcParamsCesRate 1.3.6.1.4.1.9.9.279.1.2.1.1.3 unsigned32 read-only
Maximum rate in kbps at which CES VCs can transmit data with the associated permanent virtual path.
                         caqVpcParamsDataVcCount 1.3.6.1.4.1.9.9.279.1.2.1.1.4 integer32 read-only
Number of data VCs currently associated with the permanent virtual path.
                         caqVpcParamsCesVcCount 1.3.6.1.4.1.9.9.279.1.2.1.1.5 integer32 read-only
Number of CES VCs currently associated with the permanent virtual path.
                         caqVpcParamsVcdF4Seg 1.3.6.1.4.1.9.9.279.1.2.1.1.6 integer32 read-only
Vcd for F4 OAM segment processing.
                         caqVpcParamsVcdF4Ete 1.3.6.1.4.1.9.9.279.1.2.1.1.7 integer32 read-only
Vcd for F4 OAM end to end processing.
                         caqVpcParamsScr 1.3.6.1.4.1.9.9.279.1.2.1.1.8 unsigned32 read-only
Sustained cell rate associated with the PVP.
                         caqVpcParamsMbs 1.3.6.1.4.1.9.9.279.1.2.1.1.9 unsigned32 read-only
Maximum burst size associated with the PVP.
                         caqVpcParamsAvailBw 1.3.6.1.4.1.9.9.279.1.2.1.1.10 unsigned32 read-only
Bandwidth in Kbps currently currently available on this PVP.
             caqQueuingParams 1.3.6.1.4.1.9.9.279.1.3
                 caqQueuingParamsTable 1.3.6.1.4.1.9.9.279.1.3.1 no-access
This table provides queuing related information for a VC existing on an ATM interface.
                     caqQueuingParamsEntry 1.3.6.1.4.1.9.9.279.1.3.1.1 no-access
This is defined as an entry in caqQueuingParamsTable.
                         caqQueuingParamsMeanQDepth 1.3.6.1.4.1.9.9.279.1.3.1.1.1 unsigned32 read-only
Mean Queue Depth associated with the vc. This value is calculated based on the actual queue depth on the interface and the exponential weighting constant.
                 caqQueuingParamsClassTable 1.3.6.1.4.1.9.9.279.1.3.2 no-access
This table provides queuing information for all queuing classes associating with a VC.
                     caqQueuingParamsClassEntry 1.3.6.1.4.1.9.9.279.1.3.2.1 no-access
This is defined as an entry in ciscoAtmQosVcQueuingClassTable to provide queuing information of a specific class.
                         caqQueuingParamsClassIndex 1.3.6.1.4.1.9.9.279.1.3.2.1.1 integer32 no-access
A class index, which associates with an IP precedence (0 to 8), is defined to reference individual caqQueuingParamsClassEntry.
                         caqQueuingParamsClassRandDrp 1.3.6.1.4.1.9.9.279.1.3.2.1.2 unsigned32 read-only
Number of packets dropped when Mean Queue Length is between Minimum Threshold and Maximum Threshold range.
                         caqQueuingParamsClassTailDrp 1.3.6.1.4.1.9.9.279.1.3.2.1.3 unsigned32 read-only
Number of packets dropped because the Mean Queue Depth exceeds the Maximum Threshold value.
                         caqQueuingParamsClassMinThre 1.3.6.1.4.1.9.9.279.1.3.2.1.4 unsigned32 read-only
Minimum Threshold value in kbps.
                         caqQueuingParamsClassMaxThre 1.3.6.1.4.1.9.9.279.1.3.2.1.5 unsigned32 read-only
Maximum Threshold value in kbps.
                         caqQueuingParamsClassMrkProb 1.3.6.1.4.1.9.9.279.1.3.2.1.6 unsigned32 read-only
Mark probability denominator. This is the value used in the calculation of a packet being dropped when the average queue size is between the minimum threshold and the maximum threshold.
         ciscoAtmQosMIBConform 1.3.6.1.4.1.9.9.279.2
             ciscoAtmQosMIBCompliances 1.3.6.1.4.1.9.9.279.2.1
                 ciscoAtmQosMIBCompliance 1.3.6.1.4.1.9.9.279.2.1.1
The compliance statement for entities which implement this Cisco ATM QoS MIB.
             ciscoAtmQosMIBGroups 1.3.6.1.4.1.9.9.279.2.2
                 ciscoAtmQosVccGroup 1.3.6.1.4.1.9.9.279.2.2.1
A collection of objects providing per-VC ATM QoS related info.
                 ciscoAtmQosVccAddon1Group 1.3.6.1.4.1.9.9.279.2.2.2
Add-on objects providing per-VC ATM QoS related info.
                 ciscoAtmQosVpcGroup 1.3.6.1.4.1.9.9.279.2.2.3
A collection of objects providing per-VP ATM QoS related info.
                 ciscoAtmQosVpcAddon1Group 1.3.6.1.4.1.9.9.279.2.2.4
Add-on objects providing per-VP ATM QoS related info.
                 ciscoAtmQosVcQueuingGroup 1.3.6.1.4.1.9.9.279.2.2.5
A collection of objects providing per-VC queuing/buffering related info.