CISCO-ATM-IF-PHYS-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ATM-IF-PHYS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoAtmIfPhysMIB 1.3.6.1.4.1.9.9.45
A minimal set of managed objects for tracking the status of DS3/E3/DS1/E1 and SONET interfaces.
       ciscoAtmIfPhysMIBObjects 1.3.6.1.4.1.9.9.45.1
           ciscoAtmIfPhysTable 1.3.6.1.4.1.9.9.45.1.1 no-access
A table containing basic status and statistics for the physical layer of ATM interfaces.
               ciscoAtmIfPhysEntry 1.3.6.1.4.1.9.9.45.1.1.1 no-access
Basic status and statistics for the physical layer of an ATM interface.
                   ciscoAtmIfPhysStatus 1.3.6.1.4.1.9.9.45.1.1.1.1 integer read-only
The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer. Enumeration: 'loc': 4, 'plcpLOF': 11, 'lof': 3, 'normal': 1, 'maFERF': 13, 'yellowAlarm': 10, 'idle': 9, 'ais': 5, 'ocd': 15, 'los': 2, 'lop': 8, 'plcpYellow': 12, 'pathAis': 14, 'yellowLine': 6, 'yellowPath': 7.
                   ciscoAtmIfPhysSectionParityErrors 1.3.6.1.4.1.9.9.45.1.1.1.2 counter32 read-only
The number of B1 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
                   ciscoAtmIfPhysLineParityErrors 1.3.6.1.4.1.9.9.45.1.1.1.3 counter32 read-only
The number of B2 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
                   ciscoAtmIfPhysPathParityErrors 1.3.6.1.4.1.9.9.45.1.1.1.4 counter32 read-only
The number of B3 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
                   ciscoAtmIfPhysLcvErrors 1.3.6.1.4.1.9.9.45.1.1.1.5 counter32 read-only
The number of Line Code Violation errors on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
                   ciscoAtmIfPhysCBitParityErrors 1.3.6.1.4.1.9.9.45.1.1.1.6 counter32 read-only
The number of C-bit parity violations on the physical interface. This object is only present for DS3 interfaces.
                   ciscoAtmIfPhysPBitParityErrors 1.3.6.1.4.1.9.9.45.1.1.1.7 counter32 read-only
The number of P-bit parity violations or E3 G.832 BIP-8 errors on the physical interface. This object is present only for DS3/E3 interfaces.
                   ciscoAtmIfPhysPlcpBipViolations 1.3.6.1.4.1.9.9.45.1.1.1.8 counter32 read-only
The number of PLCP BIP violations on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
                   ciscoAtmIfPhysLineFebeErrors 1.3.6.1.4.1.9.9.45.1.1.1.9 counter32 read-only
The number of Z2 (Line FEBE) errors on the physical interface. This object is only present for SONET interfaces.
                   ciscoAtmIfPhysPathFebeErrors 1.3.6.1.4.1.9.9.45.1.1.1.10 counter32 read-only
The number of G1 (Path FEBE) errors on the physical interface. This object is only present for SONET interfaces.
                   ciscoAtmIfPhysCellPayloadScrambling 1.3.6.1.4.1.9.9.45.1.1.1.11 integer read-write
The status of whether cell payload scrambling is enabled or disabled on the physical interface. Enumeration: 'on': 2, 'off': 1.
                   ciscoAtmIfPhysStsStreamScrambling 1.3.6.1.4.1.9.9.45.1.1.1.12 integer read-write
The status of whether STS-stream scrambling is enabled or disabled on the physical interface. Enumeration: 'on': 2, 'off': 1.
                   ciscoAtmIfPhysFramingMode 1.3.6.1.4.1.9.9.45.1.1.1.13 integer read-write
The framing format present on the physical interface. 'sonet' indicates sts-3c or sts-12c format and applies only to OC-3 and OC-12 type interfaces, respectively. 'sdh' indicates stm1 or stm4 format and applies only to OC-3 and OC-12 type interfaces, respectively. 'ds3m23adm' indicates M23 ADM mode and applies only to DS3 type interfaces. 'ds3m23plcp' indicates M23 PLCP mode and applies only to DS3 type interfaces. 'ds3cbitadm' indicates C-BIT ADM mode and applies only to DS3 type interfaces. 'ds3cbitplcp' indicates C-BIT PLCP mode and applies only to DS3 type interfaces. 'e3g832adm' indicates G.832 ADM mode and applies only to E3 type interfaces. 'e3g751adm' indicates G.751 ADM mode and applies only to E3 type interfaces. 'e3g751plcp' indicates G.751 PLCP mode and applies only to E3 type interfaces. 'ds1sfadm' indicates DS1 SF ADM mode and applies only to DS1 type interfaces. 'ds1esfadm' indicates DS1 ESF ADM mode and applies only to DS1 type interfaces. 'ds1sfplcp' indicates DS1 SF PLCP mode and applies only to DS1 type interfaces. 'ds1esfplcp' indicates DS1 ESF PLCP mode and applies only to DS1 type interfaces. 'e1adm' indicates E1 ADM mode and applies only to E1 type interfaces. 'e1plcp' indicates E1 PLCP mode and applies only to E1 type interfaces. 'e1crcadm' indicates E1 CRC-4 ADM mode and applies only to E1 type interfaces. 'e1crcplcp' indicates E1 CRC-4 PLCP mode and applies only to E1 type interfaces. Enumeration: 'e3g751plcp': 9, 'ds3cbitadm': 5, 'e3g751adm': 8, 'e1crcadm': 16, 'e1plcp': 15, 'e1adm': 14, 'ds3m23plcp': 4, 'ds3cbitplcp': 6, 'ds1sfadm': 10, 'sonet': 1, 'ds3m23adm': 3, 'e3g832adm': 7, 'e1crcplcp': 17, 'ds1esfadm': 11, 'ds1sfplcp': 12, 'sdh': 2, 'ds1esfplcp': 13.
                   ciscoAtmIfPhysLoopbackConfig 1.3.6.1.4.1.9.9.45.1.1.1.14 integer read-write
The loopback configured on the physical interface: 'noLoop' indicates no loopback is present. 'diagnosticLoop' indicates transmit data stream is looped to the receive direction. 'lineLoop' indicates receive data stream is looped to the transmit direction. 'otherLoop' indicates loopbacks that are not defined here. Enumeration: 'lineLoop': 3, 'noLoop': 1, 'otherLoop': 4, 'diagnosticLoop': 2.
                   ciscoAtmIfPhysLineBuildOut 1.3.6.1.4.1.9.9.45.1.1.1.15 integer read-write
The line buildout configured on the transmit signal: 'e3AllCables' applies to all cables of E3 physical interfaces. 'ds3CablesUnder225' applies to cables under 225 feet of DS3 physical interfaces. 'ds3CablesOver225' applies to cables over 225 feet of DS3 physical interfaces. 'ds1Cables0To110' applies to cables 0 to 110 feet of DS1 physical interfaces. 'ds1Cables110To220' applies to cables 110 to 220 feet of DS1 physical interfaces. 'ds1Cables220To330' applies to cables 220 to 330 feet of DS1 physical interfaces. 'ds1Cables330To440' applies to cables 330 to 440 feet of DS1 physical interfaces. 'ds1Cables440To550' applies to cables 440 to 550 feet of DS1 physical interfaces. 'ds1Cables550To660' applies to cables 550 to 660 feet of DS1 physical interfaces. 'ds1CablesOver600' applies to cables over 600 feet of DS1 physical interfaces. 'e1AllCables' applies to all cables of E1 physical interfaces. Enumeration: 'ds1Cables550To660': 9, 'ds1Cables0To110': 4, 'e3AllCables': 1, 'ds1Cables440To550': 8, 'ds1Cables110To220': 5, 'e1AllCables': 11, 'ds1CablesOver600': 10, 'ds3CablesOver225': 3, 'ds1Cables330To440': 7, 'ds3CablesUnder225': 2, 'ds1Cables220To330': 6.
                   ciscoAtmIfPhysTransmitClockSource 1.3.6.1.4.1.9.9.45.1.1.1.16 integer read-write
The source of the tranmit clock: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'freeRunning' indicates that a local clock source is used. 'networkDerived' indicates that recovered receive clock from another interface is used as the transmit clock source. Enumeration: 'loopTiming': 1, 'freeRunning': 2, 'networkDerived': 3.
                   ciscoAtmIfPhysClockSourcePriority 1.3.6.1.4.1.9.9.45.1.1.1.17 integer read-write
The priority of this interface if configured as a network clock source. 'notConfigured' indicates this is not configured as a network clock source. Enumeration: 'priority1': 2, 'priority3': 4, 'priority2': 3, 'priority4': 5, 'notConfigured': 1.
                   ciscoAtmIfPhysClockSourceStatus 1.3.6.1.4.1.9.9.45.1.1.1.18 integer read-only
The network clock source status of this interface: 'notSelected' indicates this is not selected as the network clock source. 'selected' indicates this is selected as the network clock source. Enumeration: 'notSelected': 1, 'selected': 2.
                   ciscoAtmIfPhysDS1BitErrors 1.3.6.1.4.1.9.9.45.1.1.1.19 counter32 read-only
The number of bit errors (CRC-6 error in ESF mode and framing bit error in SF mode) on the physical interface. This object is only present for DS1 interfaces.
                   ciscoAtmIfPhysE1CrcErrors 1.3.6.1.4.1.9.9.45.1.1.1.20 counter32 read-only
The number of CRC errors (in CRC-4 mode) on the physical interface. This object is only present for E1 interfaces.
                   ciscoAtmIfPhysLineCode 1.3.6.1.4.1.9.9.45.1.1.1.21 integer read-write
The line coding present on the physical interface This object is only present for DS1/E1 interfaces. 'ami' indicates alternate mark inversion (AMI) line code on the DS1/E1 interface. 'b8zs' indicates B8ZS line code on the physical interface and applies only to DS1 interfaces. 'hdb3' indicates HDB3 line code on the physical interface and applies only to E1 interfaces. Enumeration: 'ami': 1, 'hdb3': 3, 'b8zs': 2.
       ciscoAtmIfPhysMIBConformance 1.3.6.1.4.1.9.9.45.3
           ciscoAtmIfPhysMIBCompliances 1.3.6.1.4.1.9.9.45.3.1
               ciscoAtmIfPhysMIBCompliance 1.3.6.1.4.1.9.9.45.3.1.1
The compliance statement for entities which implement the Cisco ATM Interface Physical MIB.
               ciscoAtmIfPhysMIBCompliance2 1.3.6.1.4.1.9.9.45.3.1.2
The compliance statement for entities which implement the Cisco ATM Interface Physical MIB.
               ciscoAtmIfPhysMIBCompliance3 1.3.6.1.4.1.9.9.45.3.1.3
The compliance statement for entities which implement the Cisco ATM Interface Physical MIB.
           ciscoAtmIfPhysMIBGroups 1.3.6.1.4.1.9.9.45.3.2
               ciscoAtmIfPhysMIBCommonGroup 1.3.6.1.4.1.9.9.45.3.2.1
A collection of objects common to all ATM physical layer interfaces.
               ciscoAtmIfPhysMIBSonetGroup 1.3.6.1.4.1.9.9.45.3.2.2
A collection of objects for ATM SONET interfaces.
               ciscoAtmIfPhysMIBDs3E3Group 1.3.6.1.4.1.9.9.45.3.2.3
A collection of objects for ATM DS3/E3 interfaces.
               ciscoAtmIfPhysMIBCommonGroup2 1.3.6.1.4.1.9.9.45.3.2.4
Additional collection of objects common to all ATM physical layer interfaces.
               ciscoAtmIfPhysMIBSonetGroup2 1.3.6.1.4.1.9.9.45.3.2.5
Additional collection of objects for ATM SONET interfaces.
               ciscoAtmIfPhysMIBDs3Group 1.3.6.1.4.1.9.9.45.3.2.6
Collection of objects for ATM DS3 interfaces.
               ciscoAtmIfPhysMIBDs1E1Group 1.3.6.1.4.1.9.9.45.3.2.7
A collection of objects for ATM DS1/E1 interfaces.
               ciscoAtmIfPhysMIBDs1Group 1.3.6.1.4.1.9.9.45.3.2.8
A collection of objects for ATM DS1 interfaces.
               ciscoAtmIfPhysMIBE1Group 1.3.6.1.4.1.9.9.45.3.2.9
A collection of objects for ATM E1 interfaces.