CHANNEL-CHANGE-MIB: View SNMP OID List / Download MIB

VENDOR: NXNETWORKS


 Home MIB: CHANNEL-CHANGE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fsan 1.3.6.1.4.1.1
     fsVdsl 1.3.6.1.4.1.1.1
         channelChangeMib 1.3.6.1.4.1.1.1.1
This module defines a MIB for managing the Channel Change Control Function within an OLT/ONU.
             channelChangeMibObjects 1.3.6.1.4.1.1.1.1.1
                 channelTable 1.3.6.1.4.1.1.1.1.1.1 no-access
This defines the channels and associated ATM replication points (ATM VCCs) within the OLT/ONU. Note that the channel table supports both IP multicast addresses and DSM-CC program IDs as a means of channel lookup.
                     channelEntry 1.3.6.1.4.1.1.1.1.1.1.1 no-access
An entry in the channelTable represents a single channel.
                         channelId 1.3.6.1.4.1.1.1.1.1.1.1.1 ipaddress no-access
The channelId shall be a Class D IP address allocated to the multicast channel regardless of whether the channel is delivering video over UDP/IP multicast or AAL5. Where DSM-CC is used as the channel change protocol, this is also the DSM-CC Broadcast Program ID (BPID). This facilitates transparent mapping between the IGMP and DSM-CC channel change protocols.
                         entitlementIndex 1.3.6.1.4.1.1.1.1.1.1.1.2 integer32 read-only
The value of this object is the key for performing conditional access. The value zero (0) is reserved and is allocated to a channel which is free and does not require conditional access to be performed. Note that a maximum of 4095 channels can be supported by this MIB.
                         networkPortId 1.3.6.1.4.1.1.1.1.1.1.1.3 interfaceindex read-only
The value of this object shall be equal to the ifIndex of the network interface in the OLT/ONU carrying the multicast channels. This is so that this object along with the vpi and vci objects below can be used as an index into the OLT's/ONU's ifTable to gather more information about the replication point(ATM VCC) such as peak bandwidth.
                         vpi 1.3.6.1.4.1.1.1.1.1.1.1.4 integer32 read-only
The value of this object is equal to the VPI allocated to the replication point (ATM VCC) in the OLT/ONU for this channel.
                         vci 1.3.6.1.4.1.1.1.1.1.1.1.5 integer32 read-only
The value of this object is equal to the VCI allocated to the replication point (ATM VCC) in the OLT/ONU for this channel.
                         channelAdminStatus 1.3.6.1.4.1.1.1.1.1.1.1.7 integer read-only
This object is used to control the management state of this channel. When this object is set to locked(1) all existing customers connected to this channel shall be immediately disconnected and further join requests to this channel should be rejected. If this object is set to shuttingDown(3), no further join requests should be accepted for this channel; when all existing customers have disconnected from this channel the value of this object moves to locked(1). Enumeration: 'locked': 1, 'shuttingDown': 3, 'unlocked': 2.
                         channelRowStatus 1.3.6.1.4.1.1.1.1.1.1.1.8 rowstatus read-only
This object is used to manage row creation and deletion. When the channelAdminStatus is locked(1) the value of this object should be notInService(2). When the channelAdminStatus is unlocked(2) the value of this objects should be active(1) or notReady (3). When the value of channelAdminStatus is shuttingDown(3), the value of this object should be active(1). Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                 customerTable 1.3.6.1.4.1.1.1.1.1.2 no-access
This defines the customers for broadcast entertainment services.
                     customerEntry 1.3.6.1.4.1.1.1.1.1.2.1 no-access
An entry in the customerTable represents a single customer.
                         onuId 1.3.6.1.4.1.1.1.1.1.2.1.1 interfaceindexorzero no-access
Describes uniquely the ONU to which the customer is attached. The value of this object shall be the ifIndex of the interface in the OLT that connects to the associated ONU. If the OLT/ONU are integrated then the value of this object shall be zero (0).
                         customerPortId 1.3.6.1.4.1.1.1.1.1.2.1.2 interfaceindex no-access
Describes uniquely the port within the ONU/OLT to which the customer is attached. The value of this object shall be the ifIndex of the port to which the customer is attached.
                         maxMulticastTraffic 1.3.6.1.4.1.1.1.1.1.2.1.3 integer32 read-only
This object defines the maximum amount of bandwidth in kilobit/s allocated to broadcast entertainment services. The value shall be an integer multiple of 10kbps and shall not exceed the DSL line rate.
                         maxMulticastStreams 1.3.6.1.4.1.1.1.1.1.2.1.4 integer32 read-only
This object defines the maximum number of multicast streams that can be active simultaneously across a DSL UNI. A value of zero (0) is used to indicate that this object shall not be used as part of any decision making process for a channel change request.
                         untimedEntitlements1 1.3.6.1.4.1.1.1.1.1.2.1.5 octet string read-only
This object is used as a bitmap to store untimed entitlements to premium channels. Note that the first bit of the first octet is reserved. Bits 1 to 2047 correspond to entitlements for channels with entitlementIndex between 1 and 2047, respectively. In order to entitlement channel with entitlementIndex x, the value of bit x in this bitmap shall be 1. In order to revoke entitlement to channel with entitlementIndex y, the value of bit y in this bitmap shall be 0.
                         untimedEntitlements2 1.3.6.1.4.1.1.1.1.1.2.1.6 octet string read-only
In order to support a greater number of channels this object is used in the same way as untimedEntitlements1 but bits 0 to 2048 correspond to entitlements for channels with entitlementIndex between 2048 and 4095, respectively. The index into this bitmap is entitlementIndex - 2048.
                         grantEntitlement 1.3.6.1.4.1.1.1.1.1.2.1.7 ipaddress read-only
When granting entitlements to a single channel for many customers SNMP Setting the untimedEntitlement1/2 object leads to lots of management traffic due to the size of the untimedEntitlement1/2 object. In this situation it is much more bandwidth efficient to use this object. To grant an entitlement, the value of this object is SET to the channelId of the Channel for which entitlement is being granted to this customer. When this object is SET, the OLT/ONU shall automatically update the associated bit in the untimedEntitlement1/2 object to 1.
                         revokeEntitlement 1.3.6.1.4.1.1.1.1.1.2.1.8 ipaddress read-only
When revoking entitlements to a single channel for many customers SNMP Setting the untimedEntitlement1/2 object leads to lots of management traffic due to the size of the untimedEntitlement1/2 object. In this situation it is much more bandwidth efficient to use this object. To revoke an entitlement, the value of this object is SET to the channelId of the Channel for which entitlement is being revoked for this customer. When this object is SET, the OLT/ONU shall automatically update the associated bit in the untimedEntitlement1/2 object to zero (0).
                         customerAdminStatus 1.3.6.1.4.1.1.1.1.1.2.1.9 integer read-only
This object is used to control the management state of this customer. When this object is set to locked(1) all existing channels being delivered to this customer shall be immediately disconnected and further join requests from this customer shall be rejected. If this object is set to shuttingDown(3), no further join requests should be accepted from this customer; when all existing channels have been disconnected from this customer the value of this object moves to locked(1). Enumeration: 'locked': 1, 'shuttingDown': 3, 'unlocked': 2.
                         customerRowStatus 1.3.6.1.4.1.1.1.1.1.2.1.10 rowstatus read-only
This object is used to manage row creation and deletion. When the channelAdminStatus is locked(1) the value of this object should be notInService(2). When the channelAdminStatus is unlocked(2) the value of this objects should be active(1) or notReady (3). When the value of channelAdminStatus is shuttingDown(3), the value of this object should be active(1). Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                 timedEntitlementTable 1.3.6.1.4.1.1.1.1.1.3 no-access
This table is used to store entitlements to channels that have a relatively short duration, such as PPV channels.
                     timedEntitlementEntry 1.3.6.1.4.1.1.1.1.1.3.1 no-access
An entry corresponds to timed entitlement for a single channel identified by the channelId. The same entry may be applicable to one or more customers as defined by the customerTimeEntitlementTable.
                         timedEntitlementId 1.3.6.1.4.1.1.1.1.1.3.1.1 integer32 read-only
Describes uniquely a timed entitlement.
                         timedEntitlementChannelId 1.3.6.1.4.1.1.1.1.1.3.1.2 ipaddress read-only
This has the value of the channelId of the channelEntry for which this timedEntitlementEntry is for.
                         startTime 1.3.6.1.4.1.1.1.1.1.3.1.3 octet string read-only
This is the time, expressed in UTC, from which time the channel is allowed to be viewed. When this time is less than or equal to the current time, the bit in the untimedEntitlement1/2 object corresponding to the channel for which this timedEntitlementEntry relates is set to 1.
                         stopTime 1.3.6.1.4.1.1.1.1.1.3.1.4 octet string read-only
This is the time, expressed in UTC, after which time the channel is not allowed to be viewed. When this time is less than the current time, the bit in the untimedEntitlement1/2 object corresponding to the channel for which this timedEntitlementEntry relates is set to zero (0). Once this is done this timedEntitlementEntry shall also be removed from this table in order to stop this table growing indefinitely. Note that the information may be archived by the management system for audit purposes.
                         entitlementRowStatus 1.3.6.1.4.1.1.1.1.1.3.1.5 rowstatus read-only
This object is used to manage row creation and deletion. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                 customerTimedEntitlementTable 1.3.6.1.4.1.1.1.1.1.4 no-access
This table defines the timed entitlements used by a customer as defined by the associated timedEntitlementEntry.
                     customerTimedEntitlementEntry 1.3.6.1.4.1.1.1.1.1.4.1 no-access
An entry corresponds to a timed entitlement for a customer.
                         custOnuId 1.3.6.1.4.1.1.1.1.1.4.1.1 interfaceindexorzero no-access
Describes uniquely the ONU to which the customer is attached. The value of this object shall be the ifIndex of the interface in the OLT that connects to the associated ONU. If the OLT/ONU are integrated then the value of this object shall be zero (0).
                         custPortId 1.3.6.1.4.1.1.1.1.1.4.1.2 interfaceindex no-access
Describes uniquely the port within the ONU/OLT to which the customer is attached. The value of this object shall be the ifIndex of the port to which the customer is attached.
                         custTimedEntitlementId 1.3.6.1.4.1.1.1.1.1.4.1.3 integer32 read-only
This has the value of the timedEntitlementId for the timedEntitlementEntry that defined the timed entitlement to a channel for this customer.
                         custTimedEntitlementRowStatus 1.3.6.1.4.1.1.1.1.1.4.1.4 rowstatus read-only
This object is used to manage row creation and deletion. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
                 rejectedOnuId 1.3.6.1.4.1.1.1.1.1.5 interfaceindexorzero read-write
Identifies the ONU from which the rejected channel change request originated.
                 rejectedCustomerPortId 1.3.6.1.4.1.1.1.1.1.6 interfaceindex read-write
Identifies the DSL portfrom which the rejected channel change request originated.
                 caFailedNotificationStatus 1.3.6.1.4.1.1.1.1.1.7 integer read-write
This object is used to enable and disable the sending of the channelChangeCAFailed trap. Enumeration: 'disabled': 2, 'enabled': 1.
             channelChangeMibNotifications 1.3.6.1.4.1.1.1.1.2
                 channelChangeMibNotificationPrefix 1.3.6.1.4.1.1.1.1.2.0
                     channelChangeCAFailed 1.3.6.1.4.1.1.1.1.2.0.1
This trap is generated when conditional access fails for a requested channel change. The trap identifies the customer that issued the request.
             channelChangeMibConformance 1.3.6.1.4.1.1.1.1.3
                 channelChangeMibCompliances 1.3.6.1.4.1.1.1.1.3.1
                     channelChangeMibCompliance 1.3.6.1.4.1.1.1.1.3.1.1
The compliance statement for SNMP entities that support the channel change function as specified in FS-VDSL SA specification. For a system to conform to this MIB it shall also implement: - ifTable from RFC 2863 to define the physical interfaces.
                 channelChangeMibGroups 1.3.6.1.4.1.1.1.1.3.2
                     channelChangeBasicGroup 1.3.6.1.4.1.1.1.1.3.2.1
A collection of objects required as a minimum to manage the Channel Change Control function.
                     channelChangeCACGroup 1.3.6.1.4.1.1.1.1.3.2.2
A collection of objects required to support CAC.
                     channelChangeBasicCAGroup 1.3.6.1.4.1.1.1.1.3.2.3
A collection of objects required to support CA with only untimed entitlements. This group is sufficient to support conditional access for up to 2047 channels.
                     channelChangeCA4095ChannelsGroup 1.3.6.1.4.1.1.1.1.3.2.4
This group is required in addition to the channelChangeBasicCAGroup to support CA for up to 4095 channels.
                     channelChangeCATimedEntitlementsGroup 1.3.6.1.4.1.1.1.1.3.2.5
This group is required in addition to the channelChangeBasicCAGroup, and if applicable the channelChangeCA4095ChannelsGroup, to support timed entitlements.
                     channelChangeCANotificationsGroup 1.3.6.1.4.1.1.1.1.3.2.6
This group contains the notification used to inform management that a conditional access request failed. This group is optional if CA is implemented by the Channel Change Function.