CENTRECOM-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: CENTRECOM-SYSTEM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atiSwitchSystem 1.3.6.1.4.1.207.8.12.2.3
Atkk Switch System objects
     atiSaveConfiguration 1.3.6.1.4.1.207.8.12.2.3.3 integer read-write
When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the atiSaveStatus object to determine when the asynchronous save operation has completed. Enumeration: 'saveToPrimary': 1, 'saveToSecondary': 2.
     atiSaveStatus 1.3.6.1.4.1.207.8.12.2.3.4 integer read-only
This object will return the status of a save operation invoked by setting the atiSaveConfiguration object. A network management application can read this object to determine that a save operation has completed. Enumeration: 'saveNotInProgress': 2, 'saveInProgress': 1.
     atiCurrentConfigInUse 1.3.6.1.4.1.207.8.12.2.3.5 integer read-only
Shows which NVRAM configuration store was used at last boot Enumeration: 'primary': 1, 'secondary': 2.
     atiConfigToUseOnReboot 1.3.6.1.4.1.207.8.12.2.3.6 integer read-write
Controls which NVRAM configuration store will be used on next reboot. Enumeration: 'primary': 1, 'secondary': 2.
     atiOverTemperatureAlarm 1.3.6.1.4.1.207.8.12.2.3.7 truthvalue read-only
Alarm status of overtemperature sensor in device enclosure.
     atiCurrentTemperature 1.3.6.1.4.1.207.8.12.2.3.8 integer read-only
Current temperature in degrees celcius measured inside device enclosure.
     atiFanStatusTable 1.3.6.1.4.1.207.8.12.2.3.9 no-access
Table of operational status of all internal cooling fans.
         atiFanStatusEntry 1.3.6.1.4.1.207.8.12.2.3.9.1 no-access
Entry in table of all internal cooling fans.
             atiFanNumber 1.3.6.1.4.1.207.8.12.2.3.9.1.1 integer read-only
Identifier of cooling fan, numbered from the front and/or left side of device.
             atiFanOperational 1.3.6.1.4.1.207.8.12.2.3.9.1.2 truthvalue read-only
Operational status of a cooling fan.
     atiPrimaryPowerOperational 1.3.6.1.4.1.207.8.12.2.3.10 truthvalue read-only
Operational status of internal power supply of a device.
     atiRedundantPowerStatus 1.3.6.1.4.1.207.8.12.2.3.11 integer read-only
Operational status of an external redundant power supply to a device. Enumeration: 'notPresent': 1, 'presentOK': 2, 'presentNotOK': 3.
     atiRedundantPowerAlarm 1.3.6.1.4.1.207.8.12.2.3.12 truthvalue read-only
Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
     atiPrimarySoftwareRev 1.3.6.1.4.1.207.8.12.2.3.13 displaystring read-only
The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
     atiSecondarySoftwareRev 1.3.6.1.4.1.207.8.12.2.3.14 displaystring read-only
The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
     atiImageToUseOnReboot 1.3.6.1.4.1.207.8.12.2.3.15 integer read-write
Controls which image will be used on next reboot. Enumeration: 'primary': 1, 'secondary': 2.
     atiSystemID 1.3.6.1.4.1.207.8.12.2.3.16 displaystring read-only
This represents the System ID of the Switch.
     atiSystemBoardID 1.3.6.1.4.1.207.8.12.2.3.17 displaystring read-only
This represents the Board ID of the Switch.
     atiSystemLeftBoardID 1.3.6.1.4.1.207.8.12.2.3.18 displaystring read-only
This represents the Left Board ID of the Summit Switch.
     atiSystemRightBoardID 1.3.6.1.4.1.207.8.12.2.3.19 displaystring read-only
This represents the Right Board ID of the Summit Switch.