CENTILLION-LESBUS-MIB: View SNMP OID List / Download MIB

VENDOR: CENTILLION NETWORKS


 Home MIB: CENTILLION-LESBUS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, LAN-EMULATION-CLIENT-MIB, LAN-EMULATION-LES-MIB, S5-TCS-MIB, LAN-EMULATION-ELAN-MIB, SNMPv2-TC, CENTILLION-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cnLesBusExtnGroup 1.3.6.1.4.1.930.2.2.3.1
     cnLesBusTable 1.3.6.1.4.1.930.2.2.3.1.1 no-access
smart les/bus enable and unique server id.
         cnLesBusEntry 1.3.6.1.4.1.930.2.2.3.1.1.1 no-access
.
             cnLesBusConfIndex 1.3.6.1.4.1.930.2.2.3.1.1.1.1 leslocalindex read-only
A value which uniquely identifies a conceptual row in the lesConfTable.
             cnLesBusSmartLes 1.3.6.1.4.1.930.2.2.3.1.1.1.2 integer read-write
This object is used to turn on/off smart les/bus. Enumeration: 'disabled': 2, 'enabled': 1.
             cnLesBusServerId 1.3.6.1.4.1.930.2.2.3.1.1.1.3 integer read-write
This object specifies the unique server id among all les/bus pairs that serve the same elan.
             cnLesBusBusAddrSpec 1.3.6.1.4.1.930.2.2.3.1.1.1.4 atmlaneaddress read-write
The bus address.
             cnLesBusBusAddrActual 1.3.6.1.4.1.930.2.2.3.1.1.1.5 atmlaneaddress read-only
The bus address.
     cnLesBusPeerTable 1.3.6.1.4.1.930.2.2.3.1.2 no-access
The LES/BUS peer table. This table contains the all LES/BUS pairs of the ELANs managed by the agent. The LES/BUS instantiated by the agent is also included in this table. Other LES/BUS pairs that are not running in the same system being managed by the agent are configured by the user. Note that there is no verification protocol supported for the entries configured by the user.
         cnLesBusPeerEntry 1.3.6.1.4.1.930.2.2.3.1.2.1 no-access
A pair of LES/BUS for the ELAN managed by the agent.
             cnLesBusIndex 1.3.6.1.4.1.930.2.2.3.1.2.1.1 leslocalindex read-only
Index into the ELAN this pair of LES/BUS is servicing.
             cnLesBusPeerIndex 1.3.6.1.4.1.930.2.2.3.1.2.1.2 integer read-only
An arbitrary integer which uniquly identifies a pair of LES/BUS within an ELAN.
             cnLesBusPeerLesAddr 1.3.6.1.4.1.930.2.2.3.1.2.1.3 atmlaneaddress read-write
The ATM address of the LES.
             cnLesBusPeerBusAddr 1.3.6.1.4.1.930.2.2.3.1.2.1.4 atmlaneaddress read-write
The ATM address of the BUS.
             cnLesBusPeerStatus 1.3.6.1.4.1.930.2.2.3.1.2.1.5 integer read-write
This object is used to create or destroy an entry from this table. This object also reflect the current state of the peer LES/BUS. If both peer LES and BUS are connected to this LES/BUS, then active(3) is returned when read, otherwise inactive(4) will be returned. Enumeration: 'active': 3, 'create': 1, 'inactive': 4, 'delete': 2.
     cnLesBusPortTable 1.3.6.1.4.1.930.2.2.3.1.3 no-access
The ATM port a LESBUS uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the LESBUS choose whichever the ATM port is available. Or the user can specify a list of ATM ports the LESBUS will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLesBusPortAtmPort1 is used first, the object cnLesBusPortAtmPort2 second if the first failed and so on.
         cnLesBusPortEntry 1.3.6.1.4.1.930.2.2.3.1.3.1 no-access
Each entry represent a LESBUS maintained by this agent. The entries are indexed by the same index (LesBusIndex) from the LesBusConfigTable defined in the ATM Forum LESBUS MIB.
             cnLesBusPortElanIndex 1.3.6.1.4.1.930.2.2.3.1.3.1.1 integer read-only
An index to the LESBUS pair that will use this table.
             cnLesBusPortIndex 1.3.6.1.4.1.930.2.2.3.1.3.1.2 integer read-only
An index to an entry in the port table
             cnLesBusCardId 1.3.6.1.4.1.930.2.2.3.1.3.1.3 integer read-write
Card ID of the ATM card.
             cnLesBusPortId 1.3.6.1.4.1.930.2.2.3.1.3.1.4 integer read-write
Port ID of the ATM port.
             cnLesBusPortStatus 1.3.6.1.4.1.930.2.2.3.1.3.1.5 integer read-write
The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read. Enumeration: 'active': 3, 'create': 1, 'inactive': 4, 'delete': 2.
 cnLecExtnGroup 1.3.6.1.4.1.930.2.2.3.2
     cnLecServerTable 1.3.6.1.4.1.930.2.2.3.2.1 no-access
The LE Client's user configured server list. The LEC can use any pf the servers defined in this table. The search order matches the order of the entries in the table.
         cnLecServerEntry 1.3.6.1.4.1.930.2.2.3.2.1.1 no-access
A LE server that the LEC can use.
             cnLecServerIndex 1.3.6.1.4.1.930.2.2.3.2.1.1.1 integer read-only
An index to the lec server table.
             cnLecServerType 1.3.6.1.4.1.930.2.2.3.2.1.1.2 integer read-write
The field specifies how the the LEC can get to the server and the server type (LES or LECS). The LEC can connect to either the LECS via ILMI/PVC/ATM address or the LES via ATm address. Enumeration: 'lecsAtmForum': 1, 'directLes': 4, 'directLecs': 3, 'lecsFromIlmi': 2, 'lecsFromPvc': 5.
             cnLecServerAddress 1.3.6.1.4.1.930.2.2.3.2.1.1.3 atmlaneaddress read-write
The field specifies the ATM address (20 octets) of the server when an ATM address is needed. If an ATM address is not needed, zero will be returned when read.
             cnLecServerStatus 1.3.6.1.4.1.930.2.2.3.2.1.1.4 integer read-write
The object is used to create or destroy an entry from this table. The entry is always in active state once created. Enumeration: 'active': 3, 'create': 1, 'delete': 2.
     cnLecPortTable 1.3.6.1.4.1.930.2.2.3.2.2 no-access
The ATM port a LEC uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the LEC choose whichever the ATM port is available. Or the user can specify a list of ATM ports the LEC will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLecPortAtmPort1 is used first, the object cnlecPortAtmPort2 second if the first failed and so on.
         cnLecPortEntry 1.3.6.1.4.1.930.2.2.3.2.2.1 no-access
Each entry represent a LEC maintained by this agent. The entries are indexed by the same index (lecIndex) from the lecConfigTable defined in the ATM Forum LEC MIB.
             cnLecPortlecIndex 1.3.6.1.4.1.930.2.2.3.2.2.1.1 integer read-only
An index to the LEC that will use this table.
             cnLecPortIndex 1.3.6.1.4.1.930.2.2.3.2.2.1.2 integer read-only
An index to an entry in the port table
             cnLecCardId 1.3.6.1.4.1.930.2.2.3.2.2.1.3 integer read-write
Card ID of the ATM card.
             cnLecPortId 1.3.6.1.4.1.930.2.2.3.2.2.1.4 integer read-write
Port ID of the ATM port.
             cnLecPortStatus 1.3.6.1.4.1.930.2.2.3.2.2.1.5 integer read-write
The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read. Enumeration: 'active': 3, 'create': 1, 'inactive': 4, 'delete': 2.
     cnLecConfigExtnTable 1.3.6.1.4.1.930.2.2.3.2.3 no-access
This the extension table of lecConfigTable.
         cnLecConfigExtnEntry 1.3.6.1.4.1.930.2.2.3.2.3.1 no-access
Each table entry contains configuration information for one LAN Emulation Client.
             cnLecTargetlessArp 1.3.6.1.4.1.930.2.2.3.2.3.1.1 enableindicator read-write
This object is used to enable or disable the targetless LE_ARP.
 cnLecsExtnGroup 1.3.6.1.4.1.930.2.2.3.3
     cnLecsPortTable 1.3.6.1.4.1.930.2.2.3.3.1 no-access
The ATM port a Lecs uses to establish virtual circuits(VCC). A User can choose to either select the any-port capability, which let the Lecs choose whichever the ATM port is available. Or the user can specify a list of ATM ports the Lecs will request the VCCs. When a list of ATM ports are specified, There are four objects used for specifying the ATM port numbers. The object cnLecsPortAtmPort1 is used first, the object cnLecsPortAtmPort2 second if the first failed and so on.
         cnLecsPortEntry 1.3.6.1.4.1.930.2.2.3.3.1.1 no-access
Each entry represent a Lecs maintained by this agent. The entries are indexed by the same index (LecsIndex) from the LecsConfigTable defined in the ATM Forum Lecs MIB.
             cnLecsIndex 1.3.6.1.4.1.930.2.2.3.3.1.1.1 integer read-only
An index to the Lecs pair that will use this table.
             cnLecsPortIndex 1.3.6.1.4.1.930.2.2.3.3.1.1.2 integer read-only
An index to an entry in the port table
             cnLecsCardId 1.3.6.1.4.1.930.2.2.3.3.1.1.3 integer read-write
Card ID of the ATM card.
             cnLecsPortId 1.3.6.1.4.1.930.2.2.3.3.1.1.4 integer read-write
Port ID of the ATM port.
             cnLecsPortStatus 1.3.6.1.4.1.930.2.2.3.3.1.1.5 integer read-write
The object is used to create or destroy an entry from this table. This object also reflect the current state of the port entry. If the client uses this port to join the ELAN, then active(3) is returned when read. Enumeration: 'active': 3, 'create': 1, 'inactive': 4, 'delete': 2.
     cnLecsExtnTable 1.3.6.1.4.1.930.2.2.3.3.2 no-access
LECS LANE extension table
         cnLecsExtnEntry 1.3.6.1.4.1.930.2.2.3.3.2.1 no-access
An extension to the lecsConfEntry which contains objects associated to a LECS.
             cnLecsExtnAtmAddressSelect 1.3.6.1.4.1.930.2.2.3.3.2.1.1 integer read-write
LECS ATM Address selection. atmForum(1) - ATM Forum well known ATM Address. userDefined(2) - User defined ATM Address. Enumeration: 'atmForum': 1, 'userDefined': 2.
 atmCallRoutingConfig 1.3.6.1.4.1.930.2.2.3.4
     atmCallRoutingConfigTable 1.3.6.1.4.1.930.2.2.3.4.1 no-access
ATM call routing config table
         atmCallRoutingConfigEntry 1.3.6.1.4.1.930.2.2.3.4.1.1 no-access
Objects atmCallRoutingId, and atmCallRoutingRowStatus are required during row creation. And object elanLesRowStatus is required during row deletion.
             atmCallRoutingId 1.3.6.1.4.1.930.2.2.3.4.1.1.1 integer read-only
Route id
             atmCallRoutingAtmAddress 1.3.6.1.4.1.930.2.2.3.4.1.1.2 atmlaneaddress read-write
             atmCallRoutingType 1.3.6.1.4.1.930.2.2.3.4.1.1.3 integer read-write
Enumeration: 'linkGroup': 3, 'host': 1, 'network': 2.
             atmCallRoutingCard 1.3.6.1.4.1.930.2.2.3.4.1.1.4 integer read-write
This field indicates the ATM card id.
             atmCallRoutingPort 1.3.6.1.4.1.930.2.2.3.4.1.1.5 integer read-write
This field indicates ATM port id.
             atmCallRoutingCost 1.3.6.1.4.1.930.2.2.3.4.1.1.6 integer read-write
The cost of the route. range from 0 to 255 with 0 the least cost. This is the link group id if atmCallRoutingType is linkGroup.
             atmCallRoutingEnable 1.3.6.1.4.1.930.2.2.3.4.1.1.7 integer read-write
Enable bit of the call routing. 1 = enable routing 2 = disable routing Enumeration: 'enable': 1, 'disable': 2.
             atmCallRoutingRowStatus 1.3.6.1.4.1.930.2.2.3.4.1.1.8 integer read-write
The current status of the entry. Entries may be added by specifying a value of valid, and removed by setting the status to invalid. Enumeration: 'add': 1, 'delete': 2.
             atmCallRoutingScope 1.3.6.1.4.1.930.2.2.3.4.1.1.9 integer read-write
PNNI scope value
             atmCallRoutingVpi 1.3.6.1.4.1.930.2.2.3.4.1.1.10 integer read-write
The VPI of the route.
 cnLaneGlobalConf 1.3.6.1.4.1.930.2.2.3.5
     cnLaneSig 1.3.6.1.4.1.930.2.2.3.5.1 integer read-write
Global parameter to enable or disable signalling in the box. Enumeration: 'disabled': 2, 'enabled': 1.
     cnLaneEdge 1.3.6.1.4.1.930.2.2.3.5.2 integer read-write
Global configuration of the box edge: configured as LEC only services edgeAndswitch: configured as full LANE services switchOnly: configured as switch only services. Enumeration: 'switchOnly': 3, 'edgeOnly': 1, 'edgeAndSwitch': 2.
     cnLaneNetPrefix 1.3.6.1.4.1.930.2.2.3.5.3 octet string read-write
Useful if the box is configured as edgeAndswitch.
     cnLaneStatusEnquiryEnable 1.3.6.1.4.1.930.2.2.3.5.4 enableindicator read-write
This object is used to enable or disable the Status enquiry. Note that this parametwer is used only if the ATM signalling is enabled.
     cnLaneStatusEnquiryInterval 1.3.6.1.4.1.930.2.2.3.5.5 timeintervalsec read-write
The Status Enquiry requests for each call are sent periodically at this interval (in secs). Note that this parametwer is used only if the ATM signalling and atmSysStatusEnquiryEnable are enabled.