CENTILLION-LECS-MPOA-MIB: View SNMP OID List / Download MIB

VENDOR: CENTILLION NETWORKS


 Home MIB: CENTILLION-LECS-MPOA-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, MPOA-MIB, SNMPv2-TC-v1, LAN-EMULATION-ELAN-MIB, SNMPv2-TC, CENTILLION-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cnLecsMpoaGroup 1.3.6.1.4.1.930.2.2.3.6
     cnLecsMpoaMpcTable 1.3.6.1.4.1.930.2.2.3.6.1 no-access
The Bay Networks proprietary LECS MPC Table. This table contains configuration information for all LECS Mpoa Mpcs this agent manages.
         cnLecsMpoaMpcEntry 1.3.6.1.4.1.930.2.2.3.6.1.1 no-access
Each entry contains LECS MPC information for all LECS this agent manages.
             cnLecsMpoaMpcIndex 1.3.6.1.4.1.930.2.2.3.6.1.1.1 mpcindex read-write
A value which uniquely identifies this conceptual row in the cnLecsMpoaMpcTable.
             cnLecsMpoaMpcRowStatus 1.3.6.1.4.1.930.2.2.3.6.1.1.2 rowstatus read-write
This object allows creation and deletion of Lecs MPOA Clients. Within each conceptual cnLecsMpoaMpcTable row, writable objects may be modified, regardless of the value of cnLecsMpoaMpcRowStatus.
             cnLecsMpoaMpcCtrlAtmAddr 1.3.6.1.4.1.930.2.2.3.6.1.1.3 atmconfigaddr read-write
The MPC's Control ATM Address. There exists one Control ATM Address per MPC, therefore, the value of this entry is unique within the table. The control ATM Address is the address which is used by the MPC in its requests to the MPS. The value of this object should not change, once created.
             cnLecsMpoaMpcSCSetupFrameCount 1.3.6.1.4.1.930.2.2.3.6.1.1.4 integer32 read-write
This represents the Short-cut setup frame count parameter. This value is frames measured over mpcSCFrameTime seconds. Flow detection is protocol independent. i.e. all network layers lecsMpcProtocolEntries for this MPC share the flow rate specification. A value of 1 causes all flows to initiate resolution/shortcut. process.
             cnLecsMpoaMpcSCSetupFrameTime 1.3.6.1.4.1.930.2.2.3.6.1.1.5 integer32 read-write
Short-cut setup frame time, in seconds.
             cnLecsMpoaMpcInitialRetryTime 1.3.6.1.4.1.930.2.2.3.6.1.1.6 integer32 read-write
This is the initial value for the retry time out period used for timing out MPOA Resolution Requests in seconds. Retry time consists of this initial time-out and a retry muliplier. If a response is not received, then another request is sent with a timeout of retry time * retry time maximum seconds, or until cnLecsMpoaMpcRetryTimeMaximum.
             cnLecsMpoaMpcRetryTimeMaximum 1.3.6.1.4.1.930.2.2.3.6.1.1.7 integer32 read-write
Cumulative max value for Retry Time. Retries are attempted at intervals determined by the algorithm descrived in the definition of cnLecsMpoaMpcInitalRetryTime.
             cnLecsMpoaMpcHoldDownTime 1.3.6.1.4.1.930.2.2.3.6.1.1.8 integer32 read-write
Hold Down Time Minimum time to wait before reinitiating a failed resolution attempt. Default is cnLecsMpoaMpcRetryTimeMaximum * 4.
             cnLecsMpoaMpcDefaultTLV 1.3.6.1.4.1.930.2.2.3.6.1.1.9 truthvalue read-write
Indicates whether this CnLecsMpoaMpcEntry contains the default TLV settings. Only one entry in the table can have the default setttings.
     cnLecsMpoaMpsTable 1.3.6.1.4.1.930.2.2.3.6.2 no-access
The Bay Networks proprietary LECS MPS Table. This table contains configuration information for all LECS Mpoa Mpss this agent manages.
         cnLecsMpoaMpsEntry 1.3.6.1.4.1.930.2.2.3.6.2.1 no-access
Each entry contains LECS MPS information for all LECS this agent manages.
             cnLecsMpoaMpsIndex 1.3.6.1.4.1.930.2.2.3.6.2.1.1 mpsindex read-write
A value which uniquely identifies this conceptual row in the cnLecsMpoaMpsTable.
             cnLecsMpoaMpsRowStatus 1.3.6.1.4.1.930.2.2.3.6.2.1.2 rowstatus read-write
This object allows creation and deletion of Lecs MPOA Clients. Within each conceptual cnLecsMpoaMpsTable row, writable objects may be modified, regardless of the value of cnLecsMpoaMpsRowStatus.
             cnLecsMpoaMpsCtrlAtmAddr 1.3.6.1.4.1.930.2.2.3.6.2.1.3 atmconfigaddr read-write
The MPS's Control ATM Address. There exists one Control ATM Address per MPS, therefore, the value of this entry is unique within the table.
             cnLecsMpoaMpsKeepAliveTime 1.3.6.1.4.1.930.2.2.3.6.2.1.4 integer32 read-write
Keep-alive time is max interval between the MPS sending MPOA Keep-Alives in seconds.
             cnLecsMpoaMpsKeepAliveLifeTime 1.3.6.1.4.1.930.2.2.3.6.2.1.5 integer32 read-write
Keep-Alive Lifetime The length of time an MPC may consider a Keep-Alive valid in seconds. This value must be at least three times the cnLecsMpoaMpsKeepAliveTime.
             cnLecsMpoaMpsInitialRetryTime 1.3.6.1.4.1.930.2.2.3.6.2.1.6 integer32 read-write
Initial value in seconds for the MPOA retry mechanism.
             cnLecsMpoaMpsRetryTimeMaximum 1.3.6.1.4.1.930.2.2.3.6.2.1.7 integer32 read-write
Cumulative max value in seconds for Retry Time.
             cnLecsMpoaMpsGiveupTime 1.3.6.1.4.1.930.2.2.3.6.2.1.8 integer32 read-write
Give Up Time. Minimum time in seconds to wait before giving up on a pending resolution request.
             cnLecsMpoaMpsDefaultHoldingTime 1.3.6.1.4.1.930.2.2.3.6.2.1.9 integer32 read-write
Default Holding Time in minutes. The default Holding Time used in NHRP Resolution Replies. An egress MPS may use local information to determine a more appropriate Holding Time.
             cnLecsMpoaMpsDefaultTLV 1.3.6.1.4.1.930.2.2.3.6.2.1.10 truthvalue read-write
Indicates whether this CnLecsMpoaMpsEntry contains the default TLV settings. Only one entry in the table can have the default settings.
     cnLecsMpoaMpcProtocolTable 1.3.6.1.4.1.930.2.2.3.6.3 no-access
The Bay Networks proprietary Protocol LECS MPS Table. This table contains the protocal configuration information for all LECS this agent manages.
         cnLecsMpoaMpcProtocolEntry 1.3.6.1.4.1.930.2.2.3.6.3.1 no-access
Each entry contains Protocol LECS MPC information for all LECS this agent manages.
             cnLecsMpoaMpcProtocolIndex 1.3.6.1.4.1.930.2.2.3.6.3.1.1 mpcindex read-only
A value which uniquely identifies this conceptual row in the cnLecsMpoaMpcProtocolTable.
             cnLecsMpoaMpcFlowDetectProtocol 1.3.6.1.4.1.930.2.2.3.6.3.1.2 internetworkaddrtype read-only
The protocol on which flow detection is performed. This value is an index into the Protocol Table.
             cnLecsMpoaMpcProtocolRowStatus 1.3.6.1.4.1.930.2.2.3.6.3.1.3 rowstatus read-write
This object allows creation and deletion of Lecs MPOA Protocol.
             cnLecsMpoaMpcProtocolEnable 1.3.6.1.4.1.930.2.2.3.6.3.1.4 truthvalue read-write
This object enables or disables mpoa for a particular protocol for this entry in the table.
     cnLecsMpoaMpsProtocolTable 1.3.6.1.4.1.930.2.2.3.6.4 no-access
The Bay Networks proprietary Protocol LECS MPS Table. This table contains the protocal configuration information for all LECS this agent manages.
         cnLecsMpoaMpsProtocolEntry 1.3.6.1.4.1.930.2.2.3.6.4.1 no-access
Each entry contains Protocol LECS MPs information for all LECS this agent manages.
             cnLecsMpoaMpsProtocolIndex 1.3.6.1.4.1.930.2.2.3.6.4.1.1 mpsindex read-only
A value which uniquely identifies this conceptual row in the cnLecsMpoaMpsProtocolTable.
             cnLecsMpoaMpsInternetworkLayerProtocol 1.3.6.1.4.1.930.2.2.3.6.4.1.2 internetworkaddrtype read-only
The protocol on which flow detection is performed. This value is an index into the Protocol Table.
             cnLecsMpoaMpsProtocolRowStatus 1.3.6.1.4.1.930.2.2.3.6.4.1.3 rowstatus read-write
This object allows creation and deletion of Lecs MPOA Protocol.
             cnLecsMpoaMpsProtocolEnable 1.3.6.1.4.1.930.2.2.3.6.4.1.4 truthvalue read-write
This object enables or disables mpoa for a particular protocol for this entry in the table.