CAMBIUM-PTP250-MIB: View SNMP OID List / Download MIB

VENDOR: CAMBIUM NETWORKS LIMITED


 Home MIB: CAMBIUM-PTP250-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cambium 1.3.6.1.4.1.17713
MIB for PTP250
             ptp 1.3.6.1.4.1.17713.1
             ptmp 1.3.6.1.4.1.17713.2
             ptp250 1.3.6.1.4.1.17713.250
                     configuration 1.3.6.1.4.1.17713.250.1
                         iPAddress 1.3.6.1.4.1.17713.250.1.1 ipaddress read-only
Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely identify the unit on a network.
                         subnetMask 1.3.6.1.4.1.17713.250.1.2 ipaddress read-only
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance.
                         gatewayIPAddress 1.3.6.1.4.1.17713.250.1.3 ipaddress read-only
The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to other networks.
                         remoteMACAddress 1.3.6.1.4.1.17713.250.1.4 octet string read-only
MAC address of the PTP wireless unit forming the other end of the PTP link
                         masterSlaveMode 1.3.6.1.4.1.17713.250.1.5 integer read-only
The PTP wireless link operates using a master and slave relationship Enumeration: 'master': 1, 'slave': 0.
                         maximumTransmitPower 1.3.6.1.4.1.17713.250.1.6 integer32 read-only
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link
                         antennaGain 1.3.6.1.4.1.17713.250.1.7 integer32 read-only
Antenna Gain. Expressed in 10ths of dBi. NB: This attribute is ignored for variants with an integral antenna.
                         cableLoss 1.3.6.1.4.1.17713.250.1.8 integer32 read-only
Loss in the cable between the ODU and the antenna. Expressed in 10ths of dB. NB: This attribute is ignored for variants with an integral antenna.
                         channelBandwidth 1.3.6.1.4.1.17713.250.1.9 integer read-only
The selected bandwidth of the transmit and receive radio channels Enumeration: 'bw20MHz': 0, 'bw40MHz': 1.
                         remoteIPAddress 1.3.6.1.4.1.17713.250.1.10 ipaddress read-only
IP Address of the peer wireless unit
                         linkName 1.3.6.1.4.1.17713.250.1.11 displaystring read-only
Name of the PTP link allocated by the System Administrator. Used to establish a connection with the correct PTP wireless unit at the other end of the link. NOTE: The link name MUST be the same at both ends of the PTP link.
                         siteName 1.3.6.1.4.1.17713.250.1.12 displaystring read-only
This field contains a user-provided description of the site name together with any additional notes
                         configuredModulationMode 1.3.6.1.4.1.17713.250.1.13 integer read-only
The fixed modulation mode or maximum adaptive modulation mode to be used by the wireless link Enumeration: 'modQpskThreeQuarters': 2, 'modQpskHalf': 1, 'modBpskHalf': 0, 'mod64QamTwoThirds': 5, 'mod64QamFiveSixths': 7, 'mod64QamThreeQuarters': 6, 'mod16QamThreeQuarters': 4, 'mod16QamHalf': 3.
                         band 1.3.6.1.4.1.17713.250.1.14 integer read-only
The frequency band to be used by the wireless link Enumeration: 'freq5800MHz': 2, 'unset': 0, 'freq5400MHz': 1.
                         configuredRange 1.3.6.1.4.1.17713.250.1.15 integer32 read-only
Configured distance between the two peer wireless units expressed in hundredths of a kilometer.
                         channelSelection 1.3.6.1.4.1.17713.250.1.16 bits read-only
The channels selected for use by the user. The current channel will be selected from this list. Bits: 'channum132': 8, 'channum120': 5, 'channum116': 4, 'channum136': 9, 'channum124': 6, 'channum112': 3, 'channum128': 7, 'channum157': 13, 'channum108': 2, 'channum140': 10, 'channum165': 15, 'channum100': 0, 'channum161': 14, 'channum153': 12, 'channum149': 11, 'channum104': 1.
                         vlanTagging 1.3.6.1.4.1.17713.250.1.17 integer read-only
Whether or not to use VLAN tagging for management. Enumeration: 'disabled': 0, 'enabled': 1.
                         vlanId 1.3.6.1.4.1.17713.250.1.18 integer32 read-only
VLAN ID for management.
                         vlanPriority 1.3.6.1.4.1.17713.250.1.19 integer32 read-only
VLAN priority for management.
                         fixedModMode 1.3.6.1.4.1.17713.250.1.22 integer read-only
If disabled, allows automatic modulation mode selection. Enumeration: 'disabled': 0, 'enabled': 1.
                         dualPayload 1.3.6.1.4.1.17713.250.1.23 integer read-only
If enabled, allows dual payload modulation modes to be selected. Enumeration: 'disabled': 0, 'enabled': 1.
                     ethernet 1.3.6.1.4.1.17713.250.2
                         dataPortAutoNegotiation 1.3.6.1.4.1.17713.250.2.1 integer read-only
This controls whether the local Ethernet interface configuration is automatically negotiated or forced. Enumeration: 'disabled': 0, 'enabled': 1.
                         dataPortAutoNegAdvertisement 1.3.6.1.4.1.17713.250.2.2 bits read-only
This sets the different Ethernet configurations that will be advertised during auto negotiation. Bits: 'neg10MbpsHalfDuplex': 1, 'neg100MbpsHalfDuplex': 3, 'neg1000MbpsFullDuplex': 5, 'neg10MbpsFullDuplex': 2, 'neg100MbpsFullDuplex': 4, 'negInvalid': 0.
                         dataPortStatus 1.3.6.1.4.1.17713.250.2.3 integer read-only
Current status of the Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert Enumeration: 'down': 0, 'up': 1.
                         dataPortSpeedAndDuplex 1.3.6.1.4.1.17713.250.2.4 integer read-only
The current speed and duplex of the Ethernet link Enumeration: 'speedUnknown6': 5, 'speed1000MbpsFullDuplex': 0, 'speed100MbpsFullDuplex': 1, 'speed10MbpsFullDuplex': 3, 'speed100MbpsHalfDuplex': 2, 'speed10MbpsHalfDuplex': 4.
                     licence 1.3.6.1.4.1.17713.250.3
                         regionCode 1.3.6.1.4.1.17713.250.3.1 displaystring read-only
The region code prohibits the wireless unit from operating outside the regulated limits. NB: a change of state may generate an SNMP trap and/or SMTP email alert
                         productVariant 1.3.6.1.4.1.17713.250.3.2 integer read-only
The product variant Enumeration: 'spare5': 13, 'ptpXX500': 10, 'ptpXX400Deprecated1': 1, 'spare1': 4, 'spare3': 7, 'spare2': 6, 'ptpXX400Deprecated2': 2, 'ptpXX600Full': 12, 'ptpXX600Lite': 11, 'ptpXX400Full': 0, 'ptp250': 16, 'spare6': 14, 'ptpXX400Lite': 3, 'ptpXX500FullDeprecated': 8, 'ptpXX300': 5, 'ptpXX500LiteDeprecated': 9, 'ptp800': 15.
                         productName 1.3.6.1.4.1.17713.250.3.3 displaystring read-only
Name of the product variant
                     management 1.3.6.1.4.1.17713.250.4
                         installArmState 1.3.6.1.4.1.17713.250.4.1 integer read-only
Indicates if the unit is being installed. NB: a change of state may generate an SNMP trap and/or SMTP email alert Enumeration: 'armed': 1, 'disarmed': 0.
                         tFTPServerIPAddress 1.3.6.1.4.1.17713.250.4.2 ipaddress read-only
IP address of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved
                         tFTPServerPortNumber 1.3.6.1.4.1.17713.250.4.3 integer32 read-only
The port number of the TFTP Server from which the TFTP Software Upgrade File Name will be retrieved
                         tFTPSoftwareUpgradeFileName 1.3.6.1.4.1.17713.250.4.4 displaystring read-only
Filename of the Software Upgrade to be loaded from the TFTP Server
                         tFTPSoftwareUpgradeStatus 1.3.6.1.4.1.17713.250.4.5 integer read-only
The current status of the TFTP Software upgrade process Enumeration: 'upgradesuccessfulreboottorunthenewsoftwareimage': 3, 'idle': 0, 'uploadsuccessfulprogrammingFLASH': 2, 'upgradefailed': 4, 'uploadinprogress': 1.
                         tFTPSoftwareUpgradeStatusText 1.3.6.1.4.1.17713.250.4.6 displaystring read-only
Descriptive text describing the status of the TFTP Software upgrade process, including any error details
                         tFTPSoftwareUpgradeStatusAdditionalText 1.3.6.1.4.1.17713.250.4.7 displaystring read-only
Any additional text describing the status of the TFTP Software upgrade process, including any error details
                     phyStatus 1.3.6.1.4.1.17713.250.5
                         receivePower 1.3.6.1.4.1.17713.250.5.1 integer32 read-only
Receive power expressed in tenths of a dBm
                         vectorError 1.3.6.1.4.1.17713.250.5.2 integer32 read-only
The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude. The value represented by this attribute is the average vector error over the previous second expressed in tenths of a dB
                         transmitPower 1.3.6.1.4.1.17713.250.5.3 integer32 read-only
Transmit power expressed in tenths of a dBm
                         linkLoss 1.3.6.1.4.1.17713.250.5.5 integer32 read-only
The wireless link loss expressed in tenths of a dB
                         currentChannel 1.3.6.1.4.1.17713.250.5.6 integer32 read-only
Current active channel
                         extendedChannel 1.3.6.1.4.1.17713.250.5.7 integer32 read-only
Current extended channel in 40MHz mode
                         receiveModulationMode 1.3.6.1.4.1.17713.250.5.8 integer read-only
Current active receive modulation mode Enumeration: 'mod16QamThreeQuartersSingle': 5, 'mod64QamThreeQuartersDual': 15, 'mod64QamFiveSixthsSingle': 8, 'mod64QamTwoThirdsDual': 14, 'mod16QamHalfDual': 12, 'modQpskHalfDual': 10, 'mod16QamHalfSingle': 4, 'mod64QamThreeQuartersSingle': 7, 'modBpskHalfSingle': 1, 'mod16QamThreeQuartersDual': 13, 'acquisition': 0, 'mod64QamFiveSixthsDual': 16, 'modBpskHalfDual': 9, 'modQpskHalfSingle': 2, 'mod64QamTwoThirdsSingle': 6, 'modQpskThreeQuartersDual': 11, 'modQpskThreeQuartersSingle': 3.
                         transmitModulationMode 1.3.6.1.4.1.17713.250.5.9 integer read-only
Current active transmit modulation mode Enumeration: 'mod16QamThreeQuartersSingle': 5, 'mod64QamThreeQuartersDual': 15, 'mod64QamFiveSixthsSingle': 8, 'mod64QamTwoThirdsDual': 14, 'mod16QamHalfDual': 12, 'modQpskHalfDual': 10, 'mod16QamHalfSingle': 4, 'mod64QamThreeQuartersSingle': 7, 'modBpskHalfSingle': 1, 'mod16QamThreeQuartersDual': 13, 'acquisition': 0, 'mod64QamFiveSixthsDual': 16, 'modBpskHalfDual': 9, 'modQpskHalfSingle': 2, 'mod64QamTwoThirdsSingle': 6, 'modQpskThreeQuartersDual': 11, 'modQpskThreeQuartersSingle': 3.
                         currentFreqMHz 1.3.6.1.4.1.17713.250.5.11 integer32 read-only
Current channel frequency expressed in integer MHz
                         extendedFreqMHz 1.3.6.1.4.1.17713.250.5.12 integer32 read-only
Extended channel frequency expressed in integer MHz
                         signalStrengthRatio 1.3.6.1.4.1.17713.250.5.13 integer32 read-only
Signal strength ratio (Vertical / Horizontal) : the number of dB larger the Vertical antenna input is than the Horizontal antenna input expressed in tenths of a dB
                         searchState 1.3.6.1.4.1.17713.250.5.14 integer read-only
Search status of the wireless unit. 'Registering' means that the unit has locked to an OFDM signal, and the wireless link is up. 'Searching' means that no wireless signal has been detected. 'Acquiring' means that a wireless signal has been detected, but the unit has not locked to an OFDM signal. Enumeration: 'acquiring': 2, 'registering': 1, 'noChannels': 6, 'up': 0, 'searching': 3, 'initialising': 5, 'radarCAC': 4.
                         noiseFloor 1.3.6.1.4.1.17713.250.5.15 integer32 read-only
Noise floor expressed in tenths of a dBm
                         radarDetectChannel 1.3.6.1.4.1.17713.250.5.16 integer32 no-access
Channel on which Radar has been detected. (Note that this variable is accessible-for-notify only).
                         measuredRange 1.3.6.1.4.1.17713.250.5.17 integer32 read-only
Measured distance between the two peer wireless units expressed in tenths of Km.
                     alarms 1.3.6.1.4.1.17713.250.6
                         noWirelessChannelAvailable 1.3.6.1.4.1.17713.250.6.1 integer read-only
Spectrum Management was unable to locate a suitable wireless channel to operate on Enumeration: 'noWirelessChannelAvailable': 1, 'ok': 0.
                     smtp 1.3.6.1.4.1.17713.250.7
                         sMTPServerIPAddress 1.3.6.1.4.1.17713.250.7.1 ipaddress read-only
IP address of the SMTP server
                         sMTPServerPortNumber 1.3.6.1.4.1.17713.250.7.2 integer32 read-only
Port number of the SMTP server
                         sMTPSourceEmailAddress 1.3.6.1.4.1.17713.250.7.3 displaystring read-only
The 'from' email address used when constructing the automatically generated e-mail message
                         sMTPDestinationEmailAddress 1.3.6.1.4.1.17713.250.7.4 displaystring read-only
The 'to' email address used when constructing the automatically generated e-mail message
                         sMTPEnabledMessages 1.3.6.1.4.1.17713.250.7.5 bits read-only
This controls which SMTP messages the unit will send Bits: 'noChannelAvailable': 5, 'installArmState': 4, 'dataPortUpDown': 0, 'radarDetect': 3, 'coldStart': 2, 'wirelessLinkUpDown': 1.
                     snmpControl 1.3.6.1.4.1.17713.250.8
                         sNMPCommunityTableNumber 1.3.6.1.4.1.17713.250.8.1 integer32 read-only
Number of entries in the sNMPCommunityTable.
                         sNMPCommunityTable 1.3.6.1.4.1.17713.250.8.2 no-access
SNMP community string configuration table.
                             sNMPCommunityTableEntry 1.3.6.1.4.1.17713.250.8.2.1 no-access
Table SNMPCommunityTable
                                 sNMPCommunityTableIndex 1.3.6.1.4.1.17713.250.8.2.1.1 integer32 no-access
SNMP community value, used to index the SNMPCommunityTable.
                                 sNMPCommunityString 1.3.6.1.4.1.17713.250.8.2.1.2 octet string read-only
The community string for this entry
                                 sNMPCommunityAccess 1.3.6.1.4.1.17713.250.8.2.1.3 integer read-only
Whether this community allows read-only or read-write access Enumeration: 'readWrite': 1, 'readOnly': 0.
                                 sNMPCommunityOid 1.3.6.1.4.1.17713.250.8.2.1.4 object identifier read-only
The OID at which the root of this community's subtree starts
                         sNMPTrapTableNumber 1.3.6.1.4.1.17713.250.8.3 integer32 read-only
Number of entries in the sNMPTrapTable.
                         sNMPTrapTable 1.3.6.1.4.1.17713.250.8.4 no-access
SNMP trap configuration table.
                             sNMPTrapTableEntry 1.3.6.1.4.1.17713.250.8.4.1 no-access
Table SNMPTrapTable
                                 sNMPTrapTableIndex 1.3.6.1.4.1.17713.250.8.4.1.1 integer32 no-access
SNMP trap value, used to index the SNMPTrapTable.
                                 sNMPTrapIPAddress 1.3.6.1.4.1.17713.250.8.4.1.2 ipaddress read-only
The IP address to which all SNMP Traps are sent.
                                 sNMPTrapPortNumber 1.3.6.1.4.1.17713.250.8.4.1.3 integer32 read-only
Destination port for SNMP Traps (default=162). A value of 0 will disable the trap receiver.
                                 sNMPTrapCommunity 1.3.6.1.4.1.17713.250.8.4.1.4 octet string read-only
The community string for this trap entry
                                 sNMPTrapVersion 1.3.6.1.4.1.17713.250.8.4.1.5 integer read-only
The SNMP protocol version for this trap entry Enumeration: 'v2c': 1, 'v1': 0.
                         sNMPEnabledTraps 1.3.6.1.4.1.17713.250.8.6 bits read-only
This controls which SNMP Traps the unit will send Bits: 'noChannelAvailable': 5, 'installArmState': 4, 'dataPortUpDown': 0, 'radarDetect': 3, 'coldStart': 2, 'wirelessLinkUpDown': 1.
                     ntp 1.3.6.1.4.1.17713.250.9
                         nTPState 1.3.6.1.4.1.17713.250.9.1 integer read-only
NTP control state Enumeration: 'disabled': 0, 'enabled': 1.
                         nTPPollInterval 1.3.6.1.4.1.17713.250.9.2 integer32 read-only
The NTP server polling interval
                         nTPSync 1.3.6.1.4.1.17713.250.9.3 integer read-only
If NTP Sync fails then check the server settings in the Remote Management page, or disable NTP Enumeration: 'inSync': 1, 'noSync': 0.
                         nTPLastSync 1.3.6.1.4.1.17713.250.9.4 integer32 read-only
Last NTP sync time
                         systemClock 1.3.6.1.4.1.17713.250.9.5 integer32 read-only
System clock presented as local time
                         timeZone 1.3.6.1.4.1.17713.250.9.6 integer read-only
Time zone offsets from Greenwich Mean Time (GMT) Enumeration: 'gmtPlus1030': 45, 'gmtMinus0900': 6, 'gmtPlus0300': 30, 'gmtPlus1130': 47, 'gmtMinus0800': 8, 'gmtMinus0100': 22, 'gmtZero': 24, 'gmtPlus1300': 50, 'gmtPlus0430': 33, 'gmtPlus0800': 40, 'gmtPlus0030': 25, 'gmtMinus0330': 17, 'gmtMinus1000': 4, 'gmtPlus0900': 42, 'gmtMinus0700': 10, 'gmtPlus0700': 38, 'gmtPlus0630': 37, 'gmtMinus1100': 2, 'gmtMinus0600': 12, 'gmtMinus0230': 19, 'gmtPlus0930': 43, 'gmtMinus0500': 14, 'gmtPlus0530': 35, 'gmtMinus0400': 16, 'gmtPlus0600': 36, 'gmtPlus0330': 31, 'gmtMinus0830': 7, 'gmtPlus1000': 44, 'gmtPlus1230': 49, 'gmtMinus0930': 5, 'gmtMinus1200': 0, 'gmtPlus0100': 26, 'gmtPlus0400': 32, 'gmtPlus1100': 46, 'gmtMinus0130': 21, 'gmtPlus0500': 34, 'gmtMinus1030': 3, 'gmtPlus0230': 29, 'gmtMinus0730': 9, 'gmtMinus0300': 18, 'gmtPlus0830': 41, 'gmtMinus0030': 23, 'gmtMinus0200': 20, 'gmtPlus0130': 27, 'gmtPlus0730': 39, 'gmtMinus1130': 1, 'gmtMinus0630': 11, 'gmtPlus1200': 48, 'gmtMinus0430': 15, 'gmtMinus0530': 13, 'gmtPlus0200': 28.
                         nTPServerIp 1.3.6.1.4.1.17713.250.9.7 ipaddress read-only
Specifies the NTP server IP address.
                         nTPServerPortNumber 1.3.6.1.4.1.17713.250.9.8 integer32 read-only
Port number of the NTP server
                     versions 1.3.6.1.4.1.17713.250.10
                           softwareVersion 1.3.6.1.4.1.17713.250.10.1 displaystring read-only
Current software version
                           hardwareVersion 1.3.6.1.4.1.17713.250.10.2 displaystring read-only
Hardware platform version
                           bootVersion 1.3.6.1.4.1.17713.250.10.3 displaystring read-only
Boot code software version
                     pubStats 1.3.6.1.4.1.17713.250.11
                           receiveDataRate 1.3.6.1.4.1.17713.250.11.1 integer32 read-only
Average data rate over the last one second interval (tenths of Mbps)
                           transmitDataRate 1.3.6.1.4.1.17713.250.11.2 integer32 read-only
Average data rate over the last one second interval (tenths of Mbps)
                           aggregateDataRate 1.3.6.1.4.1.17713.250.11.3 integer32 read-only
Average data rate over the last one second interval (tenths of Mbps)
                           wirelessLinkStatus 1.3.6.1.4.1.17713.250.11.4 integer read-only
Current status of the wireless link Enumeration: 'down': 0, 'up': 1.
                     ptpCompliance 1.3.6.1.4.1.17713.250.97
The compliance statement for the Cambium Networks PTP MIB
                     ptpGroups 1.3.6.1.4.1.17713.250.98
                           configurationGroup 1.3.6.1.4.1.17713.250.98.5
The configuration object group.
                           ethernetGroup 1.3.6.1.4.1.17713.250.98.6
The ethernet object group.
                           licenceGroup 1.3.6.1.4.1.17713.250.98.8
The licence object group.
                           managementGroup 1.3.6.1.4.1.17713.250.98.9
The management object group.
                           phyStatusGroup 1.3.6.1.4.1.17713.250.98.12
The phyStatus object group.
                           alarmsGroup 1.3.6.1.4.1.17713.250.98.13
The alarms object group.
                           smtpGroup 1.3.6.1.4.1.17713.250.98.15
The smtp object group.
                           snmpControlGroup 1.3.6.1.4.1.17713.250.98.16
The snmpControl object group.
                           ntpGroup 1.3.6.1.4.1.17713.250.98.17
The ntp object group.
                           versionsGroup 1.3.6.1.4.1.17713.250.98.19
The versions object group.
                           pubStatsGroup 1.3.6.1.4.1.17713.250.98.20
The pubStats object group.
                           notificationsGroup 1.3.6.1.4.1.17713.250.98.99
The notifications group.
                     ptpTraps 1.3.6.1.4.1.17713.250.99
                           ptpTrapPrefix 1.3.6.1.4.1.17713.250.99.0
                               dataPortStatusTrap 1.3.6.1.4.1.17713.250.99.0.1
Status of the Ethernet link has changed.
                               installArmStateTrap 1.3.6.1.4.1.17713.250.99.0.2
Unit install arm state has changed
                               noWirelessChannelAvailableTrap 1.3.6.1.4.1.17713.250.99.0.3
Wireless channel availability has changed
                               linkStatusTrap 1.3.6.1.4.1.17713.250.99.0.4
Wireless link status has changed
                               radarDetectTrap 1.3.6.1.4.1.17713.250.99.0.5
Radar has been detected on one or more channels