CADANT-CMTS-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: CADANT INC.


 Home MIB: CADANT-CMTS-SYSTEM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, DOCS-QOS3-MIB, INET-ADDRESS-MIB, DOCS-IF-MIB, CADANT-PRODUCTS-MIB, SNMPv2-TC, CADANT-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cadSystemMib 1.3.6.1.4.1.4998.1.1.5.1
Arris E6000 system parameters and constants
     cadSysParams 1.3.6.1.4.1.4998.1.1.5.1.1
         cadSysSyncInterval 1.3.6.1.4.1.4998.1.1.5.1.1.1 integer32 read-only
Nominal time between transmission of SYNC messages. (ref 6.3.2)
         cadSysUCDInterval 1.3.6.1.4.1.4998.1.1.5.1.1.2 integer32 read-only
Time between transmission of UCD messages. (ref 6.3.3)
         cadSysMaxMAPPending 1.3.6.1.4.1.4998.1.1.5.1.1.3 integer32 read-only
The number of mini-slots that a CMTS is allowed to map into the future. (ref 6.3.4)
         cadSysRangingInterval 1.3.6.1.4.1.4998.1.1.5.1.1.4 integer32 read-only
Time between transmission of broadcast Ranging requests. (ref 7.3.3)
         cadSysInvitedRangingRetries 1.3.6.1.4.1.4998.1.1.5.1.1.5 integer32 read-only
Number of retries on inviting ranging requests. (ref 9.2.4)
         cadSysRegistrationRequestRetries 1.3.6.1.4.1.4998.1.1.5.1.1.6 integer32 read-only
Number of retries on registration requests/responses.
         cadSysCMMAPProcessingTime 1.3.6.1.4.1.4998.1.1.5.1.1.7 integer32 read-only
Time provided between arrival of the last bit of a MAP at a CM and effectiveness of that MAP. (ref 7.1.1)
         cadSysCMRangingResponseProcessingTime 1.3.6.1.4.1.4998.1.1.5.1.1.8 integer32 read-only
Minimum tile allowed fro a CM following receipt of a rangin response before it is expected to reply to an invited ranging request.
         cadSysCMConfiguration 1.3.6.1.4.1.4998.1.1.5.1.1.9 integer32 read-write
Maximum time allowed for a CM, following receipt of a configuration file, to send a Registration Request to a CMTS.
         cadSysT5Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.10 integer32 read-only
Wait for Upstream CHannel Change response.
         cadSysT6Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.11 integer32 read-only
Wait for REG-RSP and REG-ACK
         cadSysMiniSlotSize 1.3.6.1.4.1.4998.1.1.5.1.1.12 integer32 read-only
Size of mini-slotfor upstream transmission. Must be a power of 2 (in units of the Timebase Tick).
         cadSysDSxRequestRetries 1.3.6.1.4.1.4998.1.1.5.1.1.13 integer32 read-only
Number of Timeout Retries on DSA/DSC/DSD Requests.
         cadSysDSxResponseRetries 1.3.6.1.4.1.4998.1.1.5.1.1.14 integer32 read-only
Number of Timeout Retries on DSA/DSC/DSD Responses.
         cadSysT7Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.15 integer32 read-only
Wait for DSA/DSC/DSD Response timeout.
         cadSysT8Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.16 integer32 read-only
Wait for DSA/DSC/DSD Acknowledge timeout.
         cadSysT9Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.17 integer32 read-only
Registration timeout, the time allowed between the CMTS sending a RNG-RSP(success) to a CM, and receiving a REG-REQ from that same CM.
         cadSysT10Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.18 integer32 read-only
Wait for Transaction End timeout.
         cadSysT11Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.19 integer32 read-only
Wait for a DCC Response on the old channel.
         cadSysT13Timeout 1.3.6.1.4.1.4998.1.1.5.1.1.20 integer32 read-only
Maximum holding time for QOS resources for DCC.
         cadSysDCCREQRetries 1.3.6.1.4.1.4998.1.1.5.1.1.21 integer32 read-only
Number of retries on Dynamic Channel Change Request.
         cadSysMICEnable 1.3.6.1.4.1.4998.1.1.5.1.1.22 truthvalue read-write
Enable MIC checking on the CMTS.
         cadSysMICAuthString 1.3.6.1.4.1.4998.1.1.5.1.1.23 octet string read-write
Encrypted MIC Authentication
         cadSysAutoRecoveryEnable 1.3.6.1.4.1.4998.1.1.5.1.1.24 truthvalue read-write
Enable automatic recovery of card/port/software in case of component failure.
         cadSysActiveIpAddress 1.3.6.1.4.1.4998.1.1.5.1.1.25 ipaddress read-write
Ip Address of the active control complex.
         cadSysSpOperMode 1.3.6.1.4.1.4998.1.1.5.1.1.26 bits read-write
Special operational mode. Value of 1 indicates the mode is enabled. dqossf10cms - Allow 1.0 CMs to be stored in DocsQosServiceFlowEntry adjrxpwrctl - Allow rx power control to be adjusted by mod type usage enbudptcpfltr - Allow combining of Udp and Tcp messages in a single filter upce - Allow Upstream Packet Classifier Enforcement use16ForDSPeakTrafficRate - use the defunct TLV type 16 for DS peak traffic rate cpeNacksForceCmReset - - Force CM reset upon receiving 3 consecutive CPE NACKs loadBalUnbondedVoipOn - Allow load balancing for non-bonded voice calls limitUsRngRspFreqOff - Prevent CM from using an upstream frequency beyond 42 MHz upDownTrapIfDescrOff - Allow linkup or linkdown trap to include ifDescr ofdmSparingCleanupOff - Allow automatically reset any D3.1 CMs in a cable-mac that has an OFDM channel on that DCAM in the CM's RCS after a failover or fallback cmstatusoperational - Support DOCS-IF-MIB draft-05 (cw26)'s change to docsIfCmtsCmStatusValue, such that online modems take on a value of operational(8) at the CMTS. If disabled, operational(8) is not used and online modems take on a value of registrationComplete(6) at the CMTS. docsis20test - Allow running of DOCSIS 2.0 Tests. showCmFormatCVOff - show cable modem is formatted per CableVision's requirements if set to 0. docsis10plusOff - DOCSIS 1.0+ support is enabled if set to 0. downstreamOverrideOn - downstream overrides are disabled if this is set to 0. supressDCDOff - DCDs are suppressed if set to 0. virtualCmOff - support for virtual modems is enabled if set to 0. bpiHybridOff - Allow DOCSIS 1.1 modems to operate in BPI instead of BPI+ if this is set to 0. oneDCmDSMaxTrafBurstOn - Override Max Traffic Burst for DOCSIS 1.1 modems on a 1D CAM with E6000 setting if this is set to 0. docsis30ReqTxPolicyChkOff - Override DOCSIS 3.0 checking for Request/Transmission Policy TLV on upstream flows. Bits: 'limitUsRngRspFreqOff': 9, 'cmstatusoperational': 11, 'oneDCmDSMaxTrafBurstOn': 28, 'bpiHybridOff': 27, 'upDownTrapIfDescrOff': 7, 'cpeNacksForceCmReset': 5, 'upce': 3, 'adjrxpwrctl': 1, 'use16ForDSPeakTrafficRate': 4, 'reserved31': 31, 'docsis20test': 13, 'reserved15': 15, 'reserved14': 14, 'reserved17': 17, 'reserved16': 16, 'reserved10': 10, 'reserved12': 12, 'ofdmSparingCleanupOff': 8, 'reserved19': 19, 'reserved18': 18, 'downstreamOverrideOn': 24, 'docsis30ReqTxPolicyChkOff': 29, 'virtualCmOff': 26, 'supressDCDOff': 25, 'dqossf10cms': 0, 'docsis10plusOff': 23, 'enbudptcpfltr': 2, 'loadBalUnbondedVoipOn': 6, 'bpiDynamicMulticastOff': 22, 'reserved20': 20, 'showCmFormatCVOff': 21, 'reserved30': 30.
         cadSysCountsCollectionRate 1.3.6.1.4.1.4998.1.1.5.1.1.27 unsigned32 read-write
The period, in minutes, in which every count in the CMTS is to be collected. If this object is set to 0, counts collection will be disabled.
         cadSysMaxQoSActiveTimeout 1.3.6.1.4.1.4998.1.1.5.1.1.28 integer32 read-write
Defines the maximum QoS Active Timeout the E6000 is willing to allow. If a larger value is received in a CM request the E6000 will return this value instead in the response (Reference DOCSIS RFI Section c.2.2.5.6). Note a value of 0 is infinite and is therefore treated as the largest value in the range.
         cadSysMaxQoSAdmittedTimeout 1.3.6.1.4.1.4998.1.1.5.1.1.29 integer32 read-write
Defines the maximum QoS Admitted Timeout the E6000 is willing to allow. If a larger value is received in a CM request the E6000 will return this value instead in the response (Reference DOCSIS RFI Section c.2.2.5.7). Note a value of 0 is infinite and is therefore treated as the largest value in the range.
         cadSysAllow10CmConcatenation 1.3.6.1.4.1.4998.1.1.5.1.1.30 truthvalue read-write
Defines whether or not the E6000 will allow a modem operating in DOCSIS 1.0 mode to utilize concatenation. If this value is false and a modem operating in 1.0 mode sends up a modem capability indicating concatenation the E6000 will respond by turning that capability off. If this value is true the modem will be returned whatever it requests (on or off).
         cadSysAllow10CmFragmentation 1.3.6.1.4.1.4998.1.1.5.1.1.31 truthvalue read-write
Defines whether or not the E6000 will allow a modem operating in DOCSIS 1.0 mode to utilize fragmentation. If this value is false and a modem operating in 1.0 mode sends up a modem capability indicating fragmentation the E6000 will respond by turning that capability off. If this value is true the modem will be returned whatever it requests (on or off).
         cadSysPercentAddtlDsBwAllocated 1.3.6.1.4.1.4998.1.1.5.1.1.32 integer32 read-write
This value of this setting is used to make a percentage increase to a dynamic downstream service flows maximum traffic rate. This is flexiblity actually causes the E6000 to operate outside the DOCSIS 1.1 specification by allocating and allowing more traffic than was actually requested. The initial reason for providing this capability is to mask problems produced in the Voice environment where devices have been seen to violate the traffic rates. Examples of this are MTAs that overuse the QI bit for long durations thus overdriving the downstream burst interval and the Neura IPDT gateway introducing an additional 0.5% inband signaling to the DS voice flow
         cadSysMaxTrafBurstFor11CMs 1.3.6.1.4.1.4998.1.1.5.1.1.33 integer32 read-write
This is the default value that will be used to populate the Maximum Traffic Burst for a 1.1 modem unless the maximum traffic burst TLV is explicitly provided in either the modems Request or in a Service Class Name definition. This value is being made programmable for 2 reasons: 1) So that it can be set to the DOCSIS default of 3044 for CableLabs testing and 2) it can be tuned for real world applications.
         cadSysFanSpeedControlEnable 1.3.6.1.4.1.4998.1.1.5.1.1.34 truthvalue read-write
Enable automatic fan speed control.
         cadSysFlaplistPowerAdjustThreshold 1.3.6.1.4.1.4998.1.1.5.1.1.35 tenthdb read-write
The threshold is used to monitor the power adjust in the flap list. For a range request received that results in a power adjust exceeding the threshold value will cause the counter cadIfCmtsCmCountsPowerAdjExceedsThreshold to be incremented. If the threshold is set to 0, the monitoring of power adjustment in the flap list is disabled.
         cadSysRemoteFSEnable 1.3.6.1.4.1.4998.1.1.5.1.1.36 truthvalue read-write
Indicates whether the active SCM should allow mounting the the filesystems of the standby SCM.
         cadSysRemotePortEnable 1.3.6.1.4.1.4998.1.1.5.1.1.37 truthvalue read-write
Indicates whether the active SCM should allow redirection of the serial console of the standby SCM.
         cadSysTcpSmoothingValue1D8U 1.3.6.1.4.1.4998.1.1.5.1.1.38 unsigned32 read-write
TCP smoothing value to be programmed into hardware on 1D8U CAMs.
         cadSysTcpSmoothingValue2D12U 1.3.6.1.4.1.4998.1.1.5.1.1.39 unsigned32 read-write
TCP smoothing value to be programmed into hardware on 2D12U CAMs.
         cadSysModemLossThreshold 1.3.6.1.4.1.4998.1.1.5.1.1.40 unsigned32 read-write
Minimum modem threshold triggering detection of an upstream channel lockup.
         cadSysPeakTrafRateFor11CMs 1.3.6.1.4.1.4998.1.1.5.1.1.41 bitrate read-write
This is the default value that will be used to populate the Peak Traffic Rate for a 1.1 modem configuration file unless the peak traffic rate is explicitly provided by a Service Class Name definition.
         cadSysCpeHostAuthorization 1.3.6.1.4.1.4998.1.1.5.1.1.44 truthvalue read-write
This variable enables the CPE Host Authorization feature.
         cadSysMaxUcdBurstLength 1.3.6.1.4.1.4998.1.1.5.1.1.46 integer32 read-write
This variable limits the maximum UCD burst length.
         cadSysLO1LeakDetect 1.3.6.1.4.1.4998.1.1.5.1.1.47 truthvalue read-write
This variable controls LO1 leak detection on the DMM.
         cadMtcmConditionalOverride 1.3.6.1.4.1.4998.1.1.5.1.1.48 truthvalue read-write
If set to 'true', for a MAC Domain configured for MTCM enabled operation, the E6000 will set a registering MTCM-capable CM to be MTCM disabled (via REG-RSP message) unless at least one of the config file's service flows was specifically configured to have the Bonded bit set in the Required attribute mask (in which case the CM will be set to MTCM enabled). If set to false, standard DOCSIS 3.0 operation will result.
         cadSysDelayedCpeLearning 1.3.6.1.4.1.4998.1.1.5.1.1.49 truthvalue read-write
This setting only applies to modems that have BPI enabled. When set to false(2), CPE learning is enabled during registration when BPI initialization is initiated for those modems using BPI. When set to true(1), CPE learning is delayed during registration until BPI initialization is complete for those modems using BPI. For modems not using BPI, CPE learning is enabled when registration is complete.
         cadSysModPriDsInRccEnabled 1.3.6.1.4.1.4998.1.1.5.1.1.52 truthvalue read-write
Enable modifying primary Downstream channel in RCC of Reg-Rsp-MP. Refer ECN 690.
         cadSysSendTccRefIdPerFragment 1.3.6.1.4.1.4998.1.1.5.1.1.53 truthvalue read-write
Settings for sending the Transmit Channel Configuration (TCC) Reference sub-type 46.1 for type 46 TCC fragmentation. If 'true', sends 46.1 Ref ID in every type 46 TCC fragment; If 'false', only sends 46.1 Ref ID in the first TCC fragment (DOCSIS Compliant).
         cadSysPeakTrRateUpstream 1.3.6.1.4.1.4998.1.1.5.1.1.54 truthvalue read-write
This object enables support for Peak Traffic Rate in the upstream direction.
         cadSysAllowAmbiguityOverride 1.3.6.1.4.1.4998.1.1.5.1.1.55 truthvalue read-write
This object enables ambiguity resolution channel-override actions.
         cadSysUnicastNpUsAcquisition 1.3.6.1.4.1.4998.1.1.5.1.1.56 truthvalue read-write
This object enables unicast non-primary upstream channel acquisition.
         cadSysMacMoveBlockedOnRcptDhcpPkt 1.3.6.1.4.1.4998.1.1.5.1.1.57 truthvalue read-write
MAC movement is blocked on receipt of DHCP packets
         cadSysTftpProxy 1.3.6.1.4.1.4998.1.1.5.1.1.58 integer read-write
This parameter provides a global enable for the TFTP Enforce and Dynamic Shared Secret features. In order for the cadIfMacDomainTftpEnforce and cadIfMacDomainDynamicSecret parameters to take effect, this parameter must also be enabled. This parameter can also limit those features to only IPv4 transfers or IPv6 transfers. Enumeration: 'ipv6only': 3, 'enable': 1, 'disable': 0, 'ipv4only': 2.
         cadSysFanSpeedLevel 1.3.6.1.4.1.4998.1.1.5.1.1.59 integer32 read-write
Set the fan speed for the chassis.
         cadSys1x1onCmAcPwrLossEnabled 1.3.6.1.4.1.4998.1.1.5.1.1.60 truthvalue read-write
This object enables/disables the CMTS reaction to a AC Power Loss CM-STATUS. If true, the CMTS will wait until cadSys1x1onCmAcPwrLossHoldoff expires, and then the CMTS will place the CM into a 1x1 (US/DS) channel mode to conserve CM battery power. If false, the CMTS will not place a CM that reports an AC Power Loss into 1x1 mode.
         cadSysFlapListInsertionThreshold 1.3.6.1.4.1.4998.1.1.5.1.1.61 integer32 read-write
This object shows the number of seconds between successive ranging attempts that must pass before the modem is counted as flapped. The modem must have also been in a provisioning or registered state before the ranging request.
         cadSysAES128Enable 1.3.6.1.4.1.4998.1.1.5.1.1.62 truthvalue read-write
Enables AES-128 Cryptography Suite for BPI+ when true.
     cadSysSystem 1.3.6.1.4.1.4998.1.1.5.1.2
         cadSysContact 1.3.6.1.4.1.4998.1.1.5.1.2.1 displaystring read-only
The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
         cadSysName 1.3.6.1.4.1.4998.1.1.5.1.2.2 displaystring read-only
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.
         cadSysLocation 1.3.6.1.4.1.4998.1.1.5.1.2.3 displaystring read-only
The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
     cadSysControl 1.3.6.1.4.1.4998.1.1.5.1.3
         cadSysWriteMem 1.3.6.1.4.1.4998.1.1.5.1.3.1 truthvalue read-write
This variable always returns FALSE upon reading. When set to TRUE, the configuration data currently resident in volatile memory (RAM) is written to persistent memory (NVRAM).
         cadSysEraseMem 1.3.6.1.4.1.4998.1.1.5.1.3.2 truthvalue read-write
This variable always returns FALSE upon reading. When set to TRUE, the configuration data currently resident in persistent memory (NVRAM) is erased.
     cadSysSnmp 1.3.6.1.4.1.4998.1.1.5.1.4
         cadSysEnableAuthenTraps 1.3.6.1.4.1.4998.1.1.5.1.4.1 integer read-write
Indicates whether the SNMP entity is permitted to generate authentication traps. Enumeration: 'disabled': 2, 'enable': 1.
         cadSysSnmpReadAheadMax 1.3.6.1.4.1.4998.1.1.5.1.4.2 unsigned32 read-write
This value is the maximum number of records to read ahead
         cadSysSnmpRefreshTime 1.3.6.1.4.1.4998.1.1.5.1.4.3 unsigned32 read-write
This value represents how old a database record can be to be used.
         cadSnmpRemoteEngineTable 1.3.6.1.4.1.4998.1.1.5.1.4.4 no-access
Table containing information of remote SNMP engines.
             cadSnmpRemoteEngineEntry 1.3.6.1.4.1.4998.1.1.5.1.4.4.1 no-access
Entry containing information of remote SNMP engines.
                 cadSnmpRemoteEngineIpAddress 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.1 ipaddress no-access
The IP address of a remote SNMP engine with which this user can communicate.
                 cadSnmpRemoteEnginePortNumber 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.2 integer32 no-access
The UDP port of a remote SNMP engine with which this user can communicate.
                 cadSnmpRemoteEngineID 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.3 snmpengineid read-only
An SNMP engine's administratively-unique identifier of a remote SNMP engine with which this user can communicate.
                 cadSnmpRemoteUserName 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.4 snmpadminstring read-only
A human readable string representing the name of the user of a remote SNMP engine.
                 cadSnmpRemoteEngineType 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.5 integer read-only
The type to indicate the remote engineID is manually configured or internally detected via SNMP V3 Informs probe response. Enumeration: 'auto': 2, 'manual': 1.
                 cadSnmpRemoteEngineStatus 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.6 rowstatus read-only
The status of this conceptual row.
     cadSysBootParams 1.3.6.1.4.1.4998.1.1.5.1.5
         cadSysBootMacAddress 1.3.6.1.4.1.4998.1.1.5.1.5.1 macaddress read-only
Mac address of system controller
         cadSysBootFpIpAddress 1.3.6.1.4.1.4998.1.1.5.1.5.2 ipaddress read-write
Ip address of E6000 front panel ethernet port
         cadSysBootFpSubnetMask 1.3.6.1.4.1.4998.1.1.5.1.5.3 ipaddress read-write
E6000 front port interface subnet mask
         cadSysBootDefaultGateway 1.3.6.1.4.1.4998.1.1.5.1.5.6 ipaddress read-write
Default gateway
         cadSysBootTimeOffset 1.3.6.1.4.1.4998.1.1.5.1.5.7 integer32 read-only
Time offset (seconds) from UTC
         cadSysBootTimeServer 1.3.6.1.4.1.4998.1.1.5.1.5.8 ipaddress read-only
Ip address of TOD server
         cadSysBootTimeServerConnType 1.3.6.1.4.1.4998.1.1.5.1.5.9 integer read-only
Protocol (tcp/udp) used to connect to TOD server Enumeration: 'udp': 2, 'none': 3, 'tcp': 1.
         cadSysBootStartupApplication 1.3.6.1.4.1.4998.1.1.5.1.5.10 integer read-only
Startup mode of the E6000 Enumeration: 'bootapplication': 4, 'bootprobe': 1.
         cadSysBootStartupDelay 1.3.6.1.4.1.4998.1.1.5.1.5.11 integer32 read-only
Delay (in seconds) allowing changes before booting application
         cadSysBootSelection 1.3.6.1.4.1.4998.1.1.5.1.5.12 integer32 read-only
Bootloader to use (1 or 2)
         cadSysBootBaud 1.3.6.1.4.1.4998.1.1.5.1.5.13 integer32 read-only
Baud rate of front panel serial port
         cadSysBootFpBIpAddress 1.3.6.1.4.1.4998.1.1.5.1.5.15 ipaddress read-write
Ip address of E6000 side B front panel ethernet port
         cadSysBootParity 1.3.6.1.4.1.4998.1.1.5.1.5.16 octet string read-only
Serial parity of console port. Valid values are N (no parity), E (even parity), and O (odd parity).
     cadSysReload 1.3.6.1.4.1.4998.1.1.5.1.6
         cadSysReloadOperation 1.3.6.1.4.1.4998.1.1.5.1.6.1 integer read-write
Control object for E6000 reload, reading this object always returns none(99) Enumeration: 'reloadWritemem': 5, 'reloadPatchRemove': 8, 'reloadErasemem': 6, 'reloadPatchApply': 9, 'reloadPatchInstall': 7, 'reloadHitless': 4, 'none': 99, 'reloadImage': 1, 'reloadCommit': 2, 'reloadActive': 3.
         cadSysReloadImageName 1.3.6.1.4.1.4998.1.1.5.1.6.2 displaystring read-write
Image name to use in reloadImage operation
         cadSysReloadStatus 1.3.6.1.4.1.4998.1.1.5.1.6.3 bits read-only
Status object for E6000 reload Bits: 'patchRemove': 9, 'unbundling': 16, 'bundling': 15, 'remotePatchInstall': 13, 'abort': 18, 'firmwareUpdate': 11, 'remoteFirmwareUpdateRsm': 30, 'patchApplyCheck': 31, 'copyImage': 29, 'remotePatchRemove': 19, 'waitCamsReset': 34, 'remoteCommitRsm': 28, 'remoteCopyImage': 5, 'remoteWriteMem': 20, 'localInstallImage': 24, 'waitStandby': 12, 'waitSoftswitch': 32, 'remoteCommit': 4, 'remotePreloadRsm': 27, 'complete': 17, 'remoteFirmwareUpdate': 10, 'remoteInstallImage': 25, 'remoteEraseMem': 22, 'writeMem': 14, 'localPreloadRsm': 26, 'localReboot': 8, 'remoteCheckImage': 6, 'patchInstall': 7, 'localCommit': 3, 'idle': 0, 'preloadCams': 23, 'localCheckImage': 2, 'inProgress': 1, 'waitSpareCamsReset': 33, 'eraseMem': 21.
         cadSysReloadStatusDescription 1.3.6.1.4.1.4998.1.1.5.1.6.4 displaystring read-write
Textual description of reload status
         cadSysReloadPatchName 1.3.6.1.4.1.4998.1.1.5.1.6.5 displaystring read-write
Patch image name to use in patch operations
     cadSysImage 1.3.6.1.4.1.4998.1.1.5.1.7
         cadSysImageFile 1.3.6.1.4.1.4998.1.1.5.1.7.1 displaystring read-only
Image filename for current E6000 image
         cadSysImageId 1.3.6.1.4.1.4998.1.1.5.1.7.2 integer32 read-only
Image identifier for current E6000 image
         cadSysImageName 1.3.6.1.4.1.4998.1.1.5.1.7.3 displaystring read-only
Image name for current E6000 image
         cadSysImageComponentCount 1.3.6.1.4.1.4998.1.1.5.1.7.4 integer32 read-only
Image component count for current E6000 image
     cadSysDictionary 1.3.6.1.4.1.4998.1.1.5.1.8
         cadSysDictionaryTable 1.3.6.1.4.1.4998.1.1.5.1.8.1 no-access
Table describing internal state of database.
             cadSysDictionaryEntry 1.3.6.1.4.1.4998.1.1.5.1.8.1.1 no-access
Describes the internal state of an individual table.
                 cadSysDictionaryTableId 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.1 unsigned32 no-access
Internal identifier for this MIB data.
                 cadSysDictionaryName 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.2 displaystring read-only
Internal name for this MIB data.
                 cadSysDictionaryDynamic 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.3 truthvalue read-only
Indicates whether table is persistent or volatile only.
                 cadSysDictionaryNumberEntries 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.4 integer32 read-only
Current number of rows contained in the MIB table.
                 cadSysDictionaryCurrentVer 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.5 unsigned32 read-only
Current internal dynamic version number of the MIB table.
                 cadSysDictionaryPersistentVer 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.6 unsigned32 read-only
Current internal version number of the MIB table on flash.
                 cadSysDictionaryModuleVer 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.7 unsigned32 read-only
Current internal version number of the schema of the MIB table.
     cadSysConfiguration 1.3.6.1.4.1.4998.1.1.5.1.9
         cadSysConfigSaveTime 1.3.6.1.4.1.4998.1.1.5.1.9.1 dateandtime read-only
The date and time of the last write of the configuration to nvram.
     cadCosToQosMapping 1.3.6.1.4.1.4998.1.1.5.1.10
           cadCosToQosMappingTable 1.3.6.1.4.1.4998.1.1.5.1.10.9 no-access
Table of COS to QOS Mapping data
               cadCosToQosMappingEntry 1.3.6.1.4.1.4998.1.1.5.1.10.9.1 no-access
This entry contains all of the data to map 1.0 COS to 1.1 QOS parameters.
                   cadCosToQosMappingIndex 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.1 integer32 no-access
The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst
                   cadCosUpMaxTrafficBurst 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.2 unsigned32 read-write
The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst
                   cadCosDnMaxTrafficBurst 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.3 unsigned32 read-write
The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst
                   cadCosDnMinReservedRate 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.4 bitrate read-write
The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedRate
                   cadCosUpMinReservedPkt 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.5 integer32 read-write
The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedPkt
                   cadCosDnMinReservedPkt 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.6 integer32 read-write
The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedPkt
                   cadCosUpTosAndMask 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.7 octet string read-write
The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetTosAndMask
                   cadCosUpTosOrMask 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.8 octet string read-write
The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetTosOrMask
                   cadCosDnMaxLatency 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.9 unsigned32 read-write
The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxLatency
                   cadCosDnPriority 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.10 integer32 read-write
The downstream channel priority to use. A -1 indicates that the current method of using the upstream channel priority should be used.
                   cadCosDnPeakTrafficRate 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.11 bitrate read-write
Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, then the traffic will be shaped to the peak rate until the traffic is non-conforming to the policing parameters, and then the traffic will be shaped to the Tmax rate. If the peak rate is less than the Tmax for a flow, then all traffic for that flow will shaped to the Tmax rate. Setting the peak rate to a value of 0 will result in all flows being limited to Tmax at all times. Setting the peak rate to a value of 0xffffffff will result in flows having virtually unlimited bandwidth until their burst size is used up. This parameter only has meaning for flows on downstreams that are shaped.
                   cadCosUpPeakTrafficRate 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.12 bitrate read-write
Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, then the traffic will be shaped to the peak rate until the traffic is non-conforming to the policing parameters, and then the traffic will be shaped to the Tmax rate. If the peak rate is less than the Tmax for a flow, then all traffic for that flow will shaped to the Tmax rate. Setting the peak rate to a value of 0 will result in all flows being limited to Tmax at all times. Setting the peak rate to a value of 0xffffffff will result in flows having virtually unlimited bandwidth until their burst size is used up. This parameter only has meaning for upstream flows.
     cadSysKeyChain 1.3.6.1.4.1.4998.1.1.5.1.11
           cadSysKeyChainKeyTable 1.3.6.1.4.1.4998.1.1.5.1.11.1 no-access
Table describing key-chain key provisioned data.
               cadSysKeyChainKeyEntry 1.3.6.1.4.1.4998.1.1.5.1.11.1.1 no-access
Describes the provisioned data for a key in a key-chain.
                   cadSysKeyChainName 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.1 octet string no-access
The key-chain name.
                   cadSysKeyChainKeySequenceId 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.2 unsigned32 no-access
The sequence id of the key.
                   cadSysKeyChainKey 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.3 octet string read-only
The key string.
                   cadSysKeyChainKeyAcceptStartTime 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.4 dateandtime read-only
The start time when this key is valid for received packets.
                   cadSysKeyChainKeyAcceptStopTime 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.5 dateandtime read-only
The stop time when this key is no longer valid for received packets.
                   cadSysKeyChainKeyAcceptInfiniteLifetime 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.6 truthvalue read-only
If this value is set to true, the key has an infinite lifetime for received packets. Otherwise use the accept start and stop time to determine the lifetime.
                   cadSysKeyChainKeySendStartTime 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.7 dateandtime read-only
The start time when this key is valid for sending packets.
                   cadSysKeyChainKeySendStopTime 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.8 dateandtime read-only
The stop time when this key is no longer valid for sending packets.
                   cadSysKeyChainKeySendInfiniteLifetime 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.9 truthvalue read-only
If this value is set to true, the key has an infinite lifetime for sending packets. Otherwise use the send start and stop time to determine the lifetime.
                   cadSysKeyChainKeyRowStatus 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.10 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
     cadSystemMibConformance 1.3.6.1.4.1.4998.1.1.5.1.12
           cadSystemCompliances 1.3.6.1.4.1.4998.1.1.5.1.12.1
               cadSystemCompliance 1.3.6.1.4.1.4998.1.1.5.1.12.1.1
Compliance statement for entities implementing the Cadant System Mib.
           cadSystemGroups 1.3.6.1.4.1.4998.1.1.5.1.12.2
               cadSysParamsGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.1
System parameter objects
               cadSysSystemGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.2
System description objects
               cadSysControlGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.3
System control objects
               cadSysSnmpGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.4
System snmp control object
               cadSysBootParamsGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.5
System boot parameters objects
               cadSysReloadGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.6
System reload control objects
               cadSysImageGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.7
System image status objects
               cadSysConfigurationGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.8
Configuration objects
               cadSysDataServerGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.9
Configuration objects
               cadSysSourceAddressGroup 1.3.6.1.4.1.4998.1.1.5.1.12.2.10
Source Interface objects.
     cadSysProcPolicingConfig 1.3.6.1.4.1.4998.1.1.5.1.13
           cadSysProcRouterControlGlobalPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.1 unsigned32 read-write
The maximum permitted global protocol packet throttle rate to the Router Control processor.
           cadSysProcArpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.2 unsigned32 read-write
The maximum permitted ARP packet rate to the Router Control processor.
           cadSysProcDhcpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.3 unsigned32 read-write
The maxmimu permitted DHCP packet rate to the Router Control processor.
           cadSysProcIcmpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.4 unsigned32 read-write
The maximum permitted ICMP(IPv4) packet rate to the Router Control processor.
           cadSysProcOspfPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.5 unsigned32 read-write
The maximum permitted OSPFv2 packet rate to the Router Control processor.
           cadSysProcRipPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.6 unsigned32 read-write
The maximum permitted RIP packet rate to the Router Control processor.
           cadSysProcIgmpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.7 unsigned32 read-write
The maximum permitted IGMP packet rate to the Router Control processor.
           cadSysProcRouterControlOtherPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.8 unsigned32 read-write
The other protocol packet rate to the Router Control processor.
           cadSysProcSnmpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.10 unsigned32 read-write
The SNMP packet rate to the System Control processor.
           cadSysProcTftpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.11 unsigned32 read-write
The TFTP packet rate to the processor.
           cadSysProcIsisPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.12 unsigned32 read-write
The IS-IS packet rate to the processor.
           cadSysProcNdPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.13 unsigned32 read-write
The maximum permitted Neighbor Discover (ND) packet throttle rate to the Router Control processor. This includes IPv6 Router Solicitation, Router Advertise, Neighbor Solicitation, Neighbor Advertise, and Redirect messages.
           cadSysProcDhcpIpv6PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.14 unsigned32 read-write
The maximum permitted DHCP (Ipv6) packet throttle rate to the Router Control processor.
           cadSysProcIcmpIpv6PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.15 unsigned32 read-write
The maximum permitted ICMP (Ipv6 other than Neighbor Discover and MLD) packet throttle rate to the Router Control processor.
           cadSysProcMldPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.16 unsigned32 read-write
The maximum permitted MLD (version 1 and version 2) packet throttle rate to the Router Control processor.
           cadSysProcBgpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.17 unsigned32 read-write
The maximum permitted BGP packet throttle rate to the Router Control processor.
           cadSysProcPimPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.18 unsigned32 read-write
The maximum permitted PIM packet throttle rate to the Router Control processor.
           cadSysProcSnmpCmPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.19 unsigned32 read-write
The maximum permitted SNMP (from CMs) packet throttle rate to the Router Control processor.
           cadSysProcCopsPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.20 unsigned32 read-write
The maximum permitted Cops packet throttle rate to the Router Control processor.
           cadSysProcTelnetPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.21 unsigned32 read-write
The maximum permitted Telnet packet throttle rate to the Router Control processor.
           cadSysProcOspfv3PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.22 unsigned32 read-write
The maximum permitted OSPFv3 packet rate to the Router Control processor.
           cadSysProcTftpIpv6PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.23 unsigned32 read-write
The TFTP (IPv6) packet rate to the processor.
           cadSysProcEventIcmpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.24 unsigned32 read-write
The maximum permitted ICMP event packet rate to the Router Control processor.
           cadSysProcEventNoRoutePacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.25 unsigned32 read-write
The maximum permitted No Route event packet rate to the Router Control processor.
           cadSysProcEventIcmpIpv6PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.26 unsigned32 read-write
The maximum permitted ICMP (IPv6) event packet rate to the Router Control processor.
           cadSysProcEventNoRouteIpv6PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.27 unsigned32 read-write
The maximum permitted No Route (IPv6) event packet rate to the Router Control processor.
           cadSysProcEventArpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.28 unsigned32 read-write
The maximum permitted ARP event packet rate to the Router Control processor.
           cadSysProcEventNdPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.29 unsigned32 read-write
The maximum permitted ND event packet rate to the Router Control processor.
           cadSysProcEventTtlPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.30 unsigned32 read-write
The maximum permitted TTL event packet rate to the Router Control processor.
           cadSysProcEventTtlIpv6PacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.31 unsigned32 read-write
The maximum permitted TTL (IPv6) event packet rate to the Router Control processor.
           cadSysProcEventDadPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.32 unsigned32 read-write
The maximum permitted DAD event packet rate to the Router Control processor.
           cadSysProcEventDefaultPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.33 unsigned32 read-write
The maximum permitted Default event packet rate to the Router Control processor.
           cadSysProcLdpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.34 unsigned32 read-write
The LDP (UDP and TCP) packet rate to the processor.
           cadSysProcClearPolicingCounts 1.3.6.1.4.1.4998.1.1.5.1.13.35 truthvalue read-write
This variable always returns false(2) upon reading. When set to true(1), all objects under cadSysProcPolicingCounts are cleared.
           cadSysProcLacpPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.36 unsigned32 read-write
The total LACP packet rate to the processor.
           cadSysProcVrepPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.37 unsigned32 read-write
The maximum permitted D6/VREP packet rate to the processor.
           cadSysProcVpmePacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.38 unsigned32 read-write
The maximum permitted VPME packet rate to the processor.
           cadSysProcErmRpcPacketRate 1.3.6.1.4.1.4998.1.1.5.1.13.39 unsigned32 read-write
The maximum permitted RPC packet rate from an RPC ERM processor.
     cadSysProcPolicingCounts 1.3.6.1.4.1.4998.1.1.5.1.14
           cadSysProcRouterControlGlobalPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.1 counter32 read-only
The number of packets received passed to the Router Control processor.
           cadSysProcRouterControlGlobalPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.2 counter32 read-only
The number of packets received that are dropped by the Router Control processor.
           cadSysProcArpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.4 counter32 read-only
The number of ARP packets received passed to the processor.
           cadSysProcArpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.5 counter32 read-only
The number of ARP packets received that are dropped.
           cadSysProcDhcpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.7 counter32 read-only
The number of DHCP packets received passed to the processor.
           cadSysProcDhcpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.8 counter32 read-only
The number of DHCP packets received that are dropped.
           cadSysProcIcmpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.10 counter32 read-only
The number of ICMP packets received passed to the processor.
           cadSysProcIcmpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.11 counter32 read-only
The number of ICMP packets received that are dropped.
           cadSysProcOspfPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.13 counter32 read-only
The number of OSPFv2 packets received passed to the processor.
           cadSysProcOspfPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.14 counter32 read-only
The number of OSPFv2 packets received that are dropped.
           cadSysProcRipPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.16 counter32 read-only
The number of RIP packets received passed to the processor.
           cadSysProcRipPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.17 counter32 read-only
The number of RIP packets received that are dropped.
           cadSysProcIgmpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.19 counter32 read-only
The number of IGMP packets received passed to the processor.
           cadSysProcIgmpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.20 counter32 read-only
The number of IGMP packets received that are dropped.
           cadSysProcRouterControlOtherPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.22 counter32 read-only
The number of other packets received passed to the Router Control processor.
           cadSysProcRouterControlOtherPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.23 counter32 read-only
The number of other packets received that are dropped by the Router Control processor.
           cadSysProcSnmpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.25 counter32 read-only
The number of SNMP packets received passed to the System Control processor.
           cadSysProcSnmpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.26 counter32 read-only
The number of SNMP packets received that are dropped.
           cadSysProcTftpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.28 counter32 read-only
The number of TFTP packets received passed to the processor.
           cadSysProcTftpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.29 counter32 read-only
The number of TFTP packets received that are dropped.
           cadSysProcIsisPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.31 counter32 read-only
The number of IS-IS packets received passed to the processor.
           cadSysProcIsisPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.32 counter32 read-only
The number of IS-IS packets received that are dropped.
           cadSysProcNdPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.37 counter32 read-only
The number of Neighbor Discover packets received passed to the processor.
           cadSysProcNdPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.38 counter32 read-only
The number of Neighbor Discover packets received that are dropped.
           cadSysProcDhcpIpv6PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.40 counter32 read-only
The number of DHCP(Ipv6) packets received passed to the processor.
           cadSysProcDhcpIpv6PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.41 counter32 read-only
The number of DHCP(IPv6) packets received that are dropped.
           cadSysProcIcmpIpv6PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.43 counter32 read-only
The number of ICMP(Ipv6) packets received passed to the processor.
           cadSysProcIcmpIpv6PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.44 counter32 read-only
The number of ICMP(IPv6) packets received that are dropped.
           cadSysProcMldPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.46 counter32 read-only
The number of MLD packets received passed to the processor.
           cadSysProcMldPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.47 counter32 read-only
The number of MLD packets received that are dropped.
           cadSysProcBgpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.49 counter32 read-only
The number of BGP packets received passed to the processor.
           cadSysProcBgpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.50 counter32 read-only
The number of BGP packets received that are dropped.
           cadSysProcPimPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.52 counter32 read-only
The number of PIM packets received passed to the processor.
           cadSysProcPimPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.53 counter32 read-only
The number of PIM packets received that are dropped.
           cadSysProcSnmpCmPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.55 counter32 read-only
The number of SNMP (from CMs) packets received passed to the processor.
           cadSysProcSnmpCmPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.56 counter32 read-only
The number of SNMP (from CMs) packets received that are dropped.
           cadSysProcCopsPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.58 counter32 read-only
The number of COPS packets received passed to the System Control processor.
           cadSysProcCopsPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.59 counter32 read-only
The number of COPS packets received that are dropped.
           cadSysProcTelnetPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.61 counter32 read-only
The number of TELNET packets received passed to the System Control processor.
           cadSysProcTelnetPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.62 counter32 read-only
The number of TELNET packets received that are dropped.
           cadSysProcOspfv3PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.64 counter32 read-only
The number of OSPFv3 packets received passed to the processor.
           cadSysProcOspfv3PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.65 counter32 read-only
The number of OSPFv3 packets received that are dropped.
           cadSysProcTftpIpv6PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.67 counter32 read-only
The number of TFTP (IPv6) packets received passed to the processor.
           cadSysProcTftpIpv6PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.68 counter32 read-only
The number of TFTP (IPv6) packets received that are dropped.
           cadSysProcLdpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.70 counter32 read-only
The number of LDP (UDP and TCP) packets received passed to the processor.
           cadSysProcLdpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.71 counter32 read-only
The number of LDP (UDP and TCP) packets received that are dropped.
           cadSysProcEventIcmpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.73 counter32 read-only
The number of ICMP event packets received passed to the processor.
           cadSysProcEventIcmpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.74 counter32 read-only
The number of ICMP event packets received that are dropped.
           cadSysProcEventNoRoutePacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.75 counter32 read-only
The number of No Route event packets received passed to the processor.
           cadSysProcEventNoRoutePacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.76 counter32 read-only
The number of No Route event packets received that are dropped.
           cadSysProcEventIcmpIpv6PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.77 counter32 read-only
The number of ICMP (IPv6) event packets received passed to the processor.
           cadSysProcEventIcmpIpv6PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.78 counter32 read-only
The number of ICMP (IPv6) event packets received that are dropped.
           cadSysProcEventNoRouteIpv6PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.79 counter32 read-only
The number of No Route (IPv6) event packets received passed to the processor.
           cadSysProcEventNoRouteIpv6PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.80 counter32 read-only
The number of No Route (IPv6) event packets received that are dropped.
           cadSysProcEventArpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.81 counter32 read-only
The number of ARP event packets received passed to the processor.
           cadSysProcEventArpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.82 counter32 read-only
The number of ARP event packets received that are dropped.
           cadSysProcEventNdPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.83 counter32 read-only
The number of ND event packets received passed to the processor.
           cadSysProcEventNdPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.84 counter32 read-only
The number of ND event packets received that are dropped.
           cadSysProcEventTtlPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.85 counter32 read-only
The number of TTL event packets received passed to the processor.
           cadSysProcEventTtlPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.86 counter32 read-only
The number of TTL event packets received that are dropped.
           cadSysProcEventTtlIpv6PacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.87 counter32 read-only
The number of TTL (IPv6) event packets received passed to the processor.
           cadSysProcEventTtlIpv6PacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.88 counter32 read-only
The number of TTL (IPv6) event packets received that are dropped.
           cadSysProcEventDadPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.89 counter32 read-only
The number of DAD event packets received passed to the processor.
           cadSysProcEventDadPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.90 counter32 read-only
The number of DAD event packets received that are dropped.
           cadSysProcEventDefaultPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.91 counter32 read-only
The number of Default event packets received passed to the processor.
           cadSysProcEventDefaultPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.92 counter32 read-only
The number of Default event packets received that are dropped.
           cadSysProcLacpPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.93 counter32 read-only
The number of LACP packets received passed to the processor.
           cadSysProcLacpPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.94 counter32 read-only
The number of LACP packets received that are dropped.
           cadSysProcVrepPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.95 counter32 read-only
The number of D6/VREP packets received passed to the processor.
           cadSysProcVrepPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.96 counter32 read-only
The number of D6/VREP packets received that are dropped.
           cadSysProcVpmePacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.97 counter32 read-only
The number of VPME packets received passed to the processor.
           cadSysProcVpmePacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.98 counter32 read-only
The number of VPME packets received that are dropped.
           cadSysProcErmRpcPacketsReceivedPassed 1.3.6.1.4.1.4998.1.1.5.1.14.99 counter32 read-only
The number of ERM RPC packets received passed to the processor.
           cadSysProcErmRpcPacketsReceivedDropped 1.3.6.1.4.1.4998.1.1.5.1.14.100 counter32 read-only
The number of ERM RPC packets received that are dropped.
     cadSysBanner 1.3.6.1.4.1.4998.1.1.5.1.15
           cadSysBannerMotdTable 1.3.6.1.4.1.4998.1.1.5.1.15.1 no-access
Table describing the MOTD banner that is displayed before the login: prompt
               cadSysBannerMotdEntry 1.3.6.1.4.1.4998.1.1.5.1.15.1.1 no-access
Describes a line in the MOTD banner
                   cadSysBannerMotdLine 1.3.6.1.4.1.4998.1.1.5.1.15.1.1.1 integer32 no-access
The line number
                   cadSysBannerMotdText 1.3.6.1.4.1.4998.1.1.5.1.15.1.1.2 displaystring read-only
The MOTD banner text
                   cadSysBannerMotdRowStatus 1.3.6.1.4.1.4998.1.1.5.1.15.1.1.3 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
           cadSysBannerLoginTable 1.3.6.1.4.1.4998.1.1.5.1.15.2 no-access
Table describing the login banner that is displayed after the MOTD banner and before the login: prompt
               cadSysBannerLoginEntry 1.3.6.1.4.1.4998.1.1.5.1.15.2.1 no-access
Describes a line in the login banner
                   cadSysBannerLoginLine 1.3.6.1.4.1.4998.1.1.5.1.15.2.1.1 integer32 no-access
The line number
                   cadSysBannerLoginText 1.3.6.1.4.1.4998.1.1.5.1.15.2.1.2 displaystring read-only
The login banner text
                   cadSysBannerLoginRowStatus 1.3.6.1.4.1.4998.1.1.5.1.15.2.1.3 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
           cadSysBannerExecTable 1.3.6.1.4.1.4998.1.1.5.1.15.3 no-access
               cadSysBannerExecEntry 1.3.6.1.4.1.4998.1.1.5.1.15.3.1 no-access
                   cadSysBannerExecLine 1.3.6.1.4.1.4998.1.1.5.1.15.3.1.1 integer32 no-access
Index of this banner line.
                   cadSysBannerExecText 1.3.6.1.4.1.4998.1.1.5.1.15.3.1.2 displaystring read-only
Ascii text of this banner line.
                   cadSysBannerExecRowStatus 1.3.6.1.4.1.4998.1.1.5.1.15.3.1.3 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
           cadSysBannerIncomingTable 1.3.6.1.4.1.4998.1.1.5.1.15.4 no-access
               cadSysBannerIncomingEntry 1.3.6.1.4.1.4998.1.1.5.1.15.4.1 no-access
                   cadSysBannerIncomingLine 1.3.6.1.4.1.4998.1.1.5.1.15.4.1.1 integer32 no-access
                   cadSysBannerIncomingText 1.3.6.1.4.1.4998.1.1.5.1.15.4.1.2 displaystring read-only
                   cadSysBannerIncomingRowStatus 1.3.6.1.4.1.4998.1.1.5.1.15.4.1.3 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
     cadSysServer 1.3.6.1.4.1.4998.1.1.5.1.16
           cadSysServerTable 1.3.6.1.4.1.4998.1.1.5.1.16.1 no-access
Table describing the (INET) services that should run on the SCM.
               cadSysServerEntry 1.3.6.1.4.1.4998.1.1.5.1.16.1.1 no-access
Describes an INET service and whether it is enabled
                   cadSysServerType 1.3.6.1.4.1.4998.1.1.5.1.16.1.1.1 servertype no-access
The service type
                   cadSysServerAdminState 1.3.6.1.4.1.4998.1.1.5.1.16.1.1.2 adminstate read-only
The administrative state of the server.
     cadSysPatchParams 1.3.6.1.4.1.4998.1.1.5.1.17
           cadSysPatchParamTable 1.3.6.1.4.1.4998.1.1.5.1.17.1 no-access
Table of patch parameters.
               cadSysPatchParamEntry 1.3.6.1.4.1.4998.1.1.5.1.17.1.1 no-access
Entry of an individual patch parameter.
                   cadSysPatchParamIndex 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.1 integer32 no-access
The patch parameter index.
                   cadSysPatchParamName 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.2 displaystring read-only
The patch parameter name.
                   cadSysPatchParamValue 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.3 displaystring read-only
The patch parameter value.
                   cadSysPatchParamDescription 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.4 displaystring read-only
The patch parameter description.
                   cadSysPatchParamRowStatus 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.5 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
     cadSysMtceParams 1.3.6.1.4.1.4998.1.1.5.1.19
           cadSysMtceStatusCloneMonitorThreshold 1.3.6.1.4.1.4998.1.1.5.1.19.8 unsigned32 read-write
Timeout during normal operation.
           cadSysMtceStatusCloneInitThreshold 1.3.6.1.4.1.4998.1.1.5.1.19.9 unsigned32 read-write
Timeout on initialization for first status message.
           cadSysMtceStatusCloneRcvyThreshold 1.3.6.1.4.1.4998.1.1.5.1.19.10 unsigned32 read-write
Timeout following clone side recovery.
           cadSysMtceBasePingRate 1.3.6.1.4.1.4998.1.1.5.1.19.11 unsigned32 read-write
Interval between system maintenance polling of monitored threads.
           cadSysMtceOvSensitivity 1.3.6.1.4.1.4998.1.1.5.1.19.12 overloadthreshold read-write
Defines the sensitivity of user overload to changes in internal work load. Higher sensitivity results in more rapid change of user overload in response to a change in the internal work load.
           cadSysMtceOvThreshold 1.3.6.1.4.1.4998.1.1.5.1.19.13 overloadthreshold read-write
Defines the overall threshold of user overload transitions. Higher thresholds require a longer time in an internal overload state before user overload transitions occur.
           cadSysMtceDULPacketInterval 1.3.6.1.4.1.4998.1.1.5.1.19.14 unsigned32 read-write
Interval between maintenance polling of monitored BroadCom devices. Setting the value to zero will disable BroadCom device monitoring.
     cadSysDataServer 1.3.6.1.4.1.4998.1.1.5.1.21
           cadSysDataServerDataTimeout 1.3.6.1.4.1.4998.1.1.5.1.21.1 unsigned32 read-write
Time allowed for Data Query/Update to be processed.
           cadSysDataServerDataEventsPerCycle 1.3.6.1.4.1.4998.1.1.5.1.21.2 unsigned32 read-write
Number of data events allowed per cycle.
           cadSysDataServerDataSyncTimeout 1.3.6.1.4.1.4998.1.1.5.1.21.3 unsigned32 read-write
Number of data events allowed per cycle.
           cadSysDataServerSnmpReadAheadEnable 1.3.6.1.4.1.4998.1.1.5.1.21.4 truthvalue read-write
When this value is set to true Snmp read ahead is performed.
           cadSysDataServerSnmpReadAheadMax 1.3.6.1.4.1.4998.1.1.5.1.21.5 unsigned32 read-write
This value is the maximum number of records to read ahead
           cadSysDataServerSnmpRefreshTime 1.3.6.1.4.1.4998.1.1.5.1.21.6 unsigned32 read-write
This value represents how old a database record can be to be used.
           cadSysDataServerSyncDataEventsPerCycle 1.3.6.1.4.1.4998.1.1.5.1.21.7 unsigned32 read-write
This value is the maximum number of Sync events that will be processed per cycle.
           cadSysDataServerLoPriDataEventsPerCycle 1.3.6.1.4.1.4998.1.1.5.1.21.8 unsigned32 read-write
This value is the maximum number of Low Priority Sync events to be processed per cycle.
     cadSysSourceAddress 1.3.6.1.4.1.4998.1.1.5.1.22
           cadSysSourceAddressTable 1.3.6.1.4.1.4998.1.1.5.1.22.1 no-access
Table of source interface addresses for administrative services
               cadSysSourceAddressEntry 1.3.6.1.4.1.4998.1.1.5.1.22.1.1 no-access
This entry contains the configured source IPv4 and/or IPv6 address for each administrative service. If configured, it also contains the global default address.
                   cadSysSourceAddressIndex 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.1 adminsrcaddrtype no-access
The type of administrative service.
                   cadSysSourceInterfaceIpv4IfIndex 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.2 interfaceindexorzero read-write
The ifIndex of the interface from which all IPv4 packets are sourced. For a server service, it is also the only DIP allowed for incoming requests. A value of 0 indicates no source interface override.
                   cadSysSourceAddressIpv4Address 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.3 inetaddressipv4 read-only
The IPv4 address of the IPv4 interface at the time the row ipv4 ifIndex was populated. Used as the source address for the service if the state is in-service. For a server service, it is also the only DIP allowed for incoming requests. A value of null indicates no source address has been assigned.
                   cadSysSourceInterfaceIpv6IfIndex 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.4 interfaceindexorzero read-write
The ifIndex of the interface from which all IPv6 packets are sourced (not currently supported). For a server service, it is also the only DIP allowed for incoming requests. A value of 0 indicates no source interface override.
                   cadSysSourceAddressIpv6Address 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.5 inetaddressipv6 read-only
The IPv6 address of the IPv6 interface at the time the ipv6 ifIndex was populated. Used as the source address for the service if the state is in-service. For a server service, it is also the only DIP allowed for incoming requests. A value of null indicates no source address has been assigned.
     cadSysLicenseControl 1.3.6.1.4.1.4998.1.1.5.1.23
           cadSysLicenseCardId 1.3.6.1.4.1.4998.1.1.5.1.23.1 cardid no-access
CAM to be licensed.
           cadSysLicenseKey 1.3.6.1.4.1.4998.1.1.5.1.23.2 octet string no-access
License key to apply to the CAM.
           cadSysLicensePorts 1.3.6.1.4.1.4998.1.1.5.1.23.3 integer32 no-access
Number of CAM ports associated with the license.
           cadSysLicenseAnnex 1.3.6.1.4.1.4998.1.1.5.1.23.4 integer no-access
This attribute defines the ITU-J-83 Annex being used for this E6000 CMTS License. Enumeration: 'unknown': 1, 'annexB': 4, 'other': 2, 'annexC': 5, 'annexA': 3.
           cadSysLicenseStatus 1.3.6.1.4.1.4998.1.1.5.1.23.5 integer read-only
Current status of licensing operation. Enumeration: 'fail': 2, 'none': 4, 'pending': 3, 'success': 1.
     cadLaesMdTimestampMode 1.3.6.1.4.1.4998.1.1.5.1.24
           cadLaesMdTimestampModeTable 1.3.6.1.4.1.4998.1.1.5.1.24.1 no-access
Table of LAES Mediation Device Timestamp mode table
               cadLaesMdTimestampModeEntry 1.3.6.1.4.1.4998.1.1.5.1.24.1.1 no-access
This entry contains the configured MD IPv4. If configured, then all encapsulated tap packets going to that MD will contain a timestamp in the tap header.
                   cadLaesMdTimestampModeInetAddrType 1.3.6.1.4.1.4998.1.1.5.1.24.1.1.1 inetaddresstype no-access
The IP Address type of Mediation Device
                   cadLaesMdTimestampModeInetAddr 1.3.6.1.4.1.4998.1.1.5.1.24.1.1.2 inetaddress no-access
The IP Address of the Mediation Device.
                   cadLaesMdTimestampModRowStatus 1.3.6.1.4.1.4998.1.1.5.1.24.1.1.3 rowstatus read-only
The row status of this entry
     cadSysSharedSecret 1.3.6.1.4.1.4998.1.1.5.1.25
           cadSysMICSecondarySecretTable 1.3.6.1.4.1.4998.1.1.5.1.25.1 no-access
Table containing secondary shared secret strings for cable modem configuration file authentication. This table is not used unless cadSysMICEnable is set to true.
               cadSysMICSecondarySecretEntry 1.3.6.1.4.1.4998.1.1.5.1.25.1.1 no-access
Entry containing secondary shared secret strings for cable modem configuration file authentication.
                   cadSysMICSecondarySecretIndex 1.3.6.1.4.1.4998.1.1.5.1.25.1.1.1 integer no-access
Internal index for this MIB row.
                   cadSysMICSecondarySecretString 1.3.6.1.4.1.4998.1.1.5.1.25.1.1.2 octet string read-only
Encrypted MIC Authentication shared secret string.
                   cadSysMICSecondarySecretStatus 1.3.6.1.4.1.4998.1.1.5.1.25.1.1.3 rowstatus read-only
The status of this conceptual row.