CADANT-CMTS-POLICY-MIB: View SNMP OID List / Download MIB

VENDOR: CADANT INC.


 Home MIB: CADANT-CMTS-POLICY-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, CADANT-TC, CADANT-PRODUCTS-MIB, SNMPv2-TC, DC-RTM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cadPolicyMib 1.3.6.1.4.1.4998.1.1.35.1
Arris Cadant C4 CMTS policy parameters and constants
     cadScmAccessTable 1.3.6.1.4.1.4998.1.1.35.1.1 no-access
A table contains SCM access control list information. Each physical interface is associated with the access list number defined as hjpolAccListNumber in hjpolAccListTable of NETPLANE-POLICY-MIB. With this information, C4 can permit/deny access usnig access list filtering before the packet reach SCM from the specified physical interface.
         cadScmAccessEntry 1.3.6.1.4.1.4998.1.1.35.1.1.1 no-access
A conceptual row containing information about SCM access list for each physical interface.
             cadScmAccIfIndex 1.3.6.1.4.1.4998.1.1.35.1.1.1.1 interfaceindex no-access
The value of this object identifies a physical layer2 interface, such as a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which SCM access control is applied
             cadScmAccListNumber 1.3.6.1.4.1.4998.1.1.35.1.1.1.2 integer32 read-write
The value of this object identifies entry(or entries) in the hjpolAccListTable. The identified entry(or entries) contains SCM access parameters to be used when filtering traffic from individual interface sent to SCM.
             cadScmAccRowStatus 1.3.6.1.4.1.4998.1.1.35.1.1.1.3 rowstatus read-write
Control Object for row creation and deletion.
     cadDistListInTable 1.3.6.1.4.1.4998.1.1.35.1.2 no-access
Distribute List In Table
         cadDistListInEntry 1.3.6.1.4.1.4998.1.1.35.1.2.1 no-access
A row in Distribute List In table
             cadDistListInProtocol 1.3.6.1.4.1.4998.1.1.35.1.2.1.1 cadpolicyprotocol read-only
Protocol for which distribute list is applied.
             cadDistListInProtocolProcess 1.3.6.1.4.1.4998.1.1.35.1.2.1.2 integer32 read-only
VRF for which distribute list is applied.
             cadDistListInIfIndex 1.3.6.1.4.1.4998.1.1.35.1.2.1.3 interfaceindex read-only
Interface for which distribute list is applied. The value will be 1 if the distribute list is applied to all interfaces.
             cadDistListInAccessListNum 1.3.6.1.4.1.4998.1.1.35.1.2.1.4 integer32 read-only
The configured distribute in list refers to the access list specified.
             cadDistListInAccessListName 1.3.6.1.4.1.4998.1.1.35.1.2.1.5 octet string read-only
Name of the access list referred by distribute in list.
             cadDistListInStatus 1.3.6.1.4.1.4998.1.1.35.1.2.1.6 rowstatus read-only
The row status variable, used according to row installation and removal conventions. Once access list specified default row status is active.
     cadPolicyRateLimitTable 1.3.6.1.4.1.4998.1.1.35.1.4 no-access
A table of rate limiting policies applied to a physical interface.
         cadPolicyRateLimitEntry 1.3.6.1.4.1.4998.1.1.35.1.4.1 no-access
An ordered list of the rate limit polices
             cadPolicyRateLimitIfIndex 1.3.6.1.4.1.4998.1.1.35.1.4.1.1 interfaceindex no-access
The value of this object identifies a physical layer2 interface, such as a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which the rate limit policy is applied
             cadPolicyRateLimitDirection 1.3.6.1.4.1.4998.1.1.35.1.4.1.2 cadifdirection no-access
Direction of traffic on interface to apply the rate limit policy
             cadPolicyRateLimitIndex 1.3.6.1.4.1.4998.1.1.35.1.4.1.3 integer no-access
Index of rate limit policy. Policies are applied in the order specified by this index value
             cadPolicyRateLimitStatus 1.3.6.1.4.1.4998.1.1.35.1.4.1.4 rowstatus read-only
Create and delete table row entries.
             cadPolicyRateLimitAclType 1.3.6.1.4.1.4998.1.1.35.1.4.1.5 cadacltype read-only
Type of ACL associated with rate limit policy
             cadPolicyRateLimitAclNum 1.3.6.1.4.1.4998.1.1.35.1.4.1.6 integer32 read-only
ACL number. If the ACL does not exist, then this is treated as if the ACL type is none, i.e. all IP traffic matches the policy.
             cadPolicyRateLimitBps 1.3.6.1.4.1.4998.1.1.35.1.4.1.7 integer32 read-only
Average rate, in bits per second (bps).
             cadPolicyRateLimitBurstNormal 1.3.6.1.4.1.4998.1.1.35.1.4.1.8 integer32 read-only
Normal burst size, in bytes. The minimum value is bps divided by 2000.
             cadPolicyRateLimitBurstMax 1.3.6.1.4.1.4998.1.1.35.1.4.1.9 integer32 read-only
Excess burst size, in bytes. Must be equal to or larger than cadPolicyRateLimitBurstNormal
             cadPolicyRateLimitConformAction 1.3.6.1.4.1.4998.1.1.35.1.4.1.10 cadpolicyratelimitaction read-only
Action to take on packets that conform to the specified rate limit.
             cadPolicyRateLimitConformValue 1.3.6.1.4.1.4998.1.1.35.1.4.1.11 integer read-only
Value to set if action is set-prec-transmit, set-dscp-transmit or set-priority-transmit. For set-priority-transmit,the valid value range is 0-7.
             cadPolicyRateLimitExceedAction 1.3.6.1.4.1.4998.1.1.35.1.4.1.12 cadpolicyratelimitaction read-only
Action to take on packets that exceed to the specified rate limit.
             cadPolicyRateLimitExceedValue 1.3.6.1.4.1.4998.1.1.35.1.4.1.13 integer read-only
Value to set if action is set-prec-transmit, set-dscp-transmit or set-priority-transmit. For set-priority-transmit,the valid value range is 0-7.
             cadPolicyRateLimitClearCounts 1.3.6.1.4.1.4998.1.1.35.1.4.1.14 truthvalue read-only
If set to true, clear the counts in the CadPolicyRateLimitStatusEntry. When read, this field always returns false. The correct way to clear the counts is to first read them, then set ClearCounts to true.
     cadPolicyRateLimitStatusTable 1.3.6.1.4.1.4998.1.1.35.1.5 no-access
A table of counts of rate limiting policies applied to a physical interface.
         cadPolicyRateLimitStatusEntry 1.3.6.1.4.1.4998.1.1.35.1.5.1 no-access
Dyanmic status associated with a rate limit policy
             cadPolicyRateLimitConformPackets 1.3.6.1.4.1.4998.1.1.35.1.5.1.1 counter64 read-only
Number of packets conforming to the policy rate
             cadPolicyRateLimitConformBytes 1.3.6.1.4.1.4998.1.1.35.1.5.1.2 counter64 read-only
Number of bytes conforming to the policy rate
             cadPolicyRateLimitExceedPackets 1.3.6.1.4.1.4998.1.1.35.1.5.1.3 counter64 read-only
Number of packets exceeding to the policy rate
             cadPolicyRateLimitExceedBytes 1.3.6.1.4.1.4998.1.1.35.1.5.1.4 counter64 read-only
Number of bytes exceeding to the policy rate
             cadPolicyRateLimitCurrentBurst 1.3.6.1.4.1.4998.1.1.35.1.5.1.5 integer32 read-only
The current number of bytes in the burst exceeding the average bps rate
             cadPolicyRateLimitLastCleared 1.3.6.1.4.1.4998.1.1.35.1.5.1.6 timestamp read-only
The value of SysUptime when the rate limit counters were last cleared.
     cadPolicyAclTable 1.3.6.1.4.1.4998.1.1.35.1.6 no-access
A table contains access control list (ACL) information. Each row corresponds to an access control entry (ACE), and each ACL may have multiple ACEs that are applied in order to the packet being inspected.
         cadPolicyAclEntry 1.3.6.1.4.1.4998.1.1.35.1.6.1 no-access
A conceptual row containing information about SCM access list for each physical interface.
             cadAclNumber 1.3.6.1.4.1.4998.1.1.35.1.6.1.1 integer32 no-access
IPv6 ACL number. IPv6 ACLs are in the range 200-399. Extended ACL number. Extended ACLs are in the range 100-199. Standard ACLs are in the range 1-99.
             cadAclIndex 1.3.6.1.4.1.4998.1.1.35.1.6.1.2 integer32 no-access
Order in which this ACE is used in the ACL.
             cadAclType 1.3.6.1.4.1.4998.1.1.35.1.6.1.3 cadacltype read-only
Indicates whether this EACE is used as a standard, extended, or remark ACL. The rate-limiting type is not valid for this table. Remark is the only valid type that can be set, standard and extended are set by the agent when the ACE is created.
             cadAclStatus 1.3.6.1.4.1.4998.1.1.35.1.6.1.4 rowstatus read-only
RowStatus used to add and remove ACEs. ACEs that contain only remarks should have their status set to notInService and should be created with createAndWait.
             cadAclPermit 1.3.6.1.4.1.4998.1.1.35.1.6.1.5 truthvalue read-only
Permit or Deny the packet when matched.
             cadAclProtocol 1.3.6.1.4.1.4998.1.1.35.1.6.1.6 cadprotocoltype read-only
Protocol number to match
             cadAclSrcIp 1.3.6.1.4.1.4998.1.1.35.1.6.1.7 inetaddressipv4or6 read-only
Source IP address to match
             cadAclSrcIpMask 1.3.6.1.4.1.4998.1.1.35.1.6.1.8 inetaddressipv4or6 read-only
Source IP wildcard mask to match. Default to match anything
             cadAclSrcPortOp 1.3.6.1.4.1.4998.1.1.35.1.6.1.9 cadextaclcondition read-only
Source port condition (lt,gt,eq,ne) to match.
             cadAclSrcPortLo 1.3.6.1.4.1.4998.1.1.35.1.6.1.10 integer32 read-only
First Source port number to match. -1 indicates that this field is not used.
             cadAclSrcPortHi 1.3.6.1.4.1.4998.1.1.35.1.6.1.11 integer32 read-only
Second Source port number to match. -1 indicates that this field is not used.
             cadAclDstIp 1.3.6.1.4.1.4998.1.1.35.1.6.1.12 inetaddressipv4or6 read-only
Destination IP address to match
             cadAclDstIpMask 1.3.6.1.4.1.4998.1.1.35.1.6.1.13 inetaddressipv4or6 read-only
Destination IP wildcard (inverse) mask to match. Default to match anything.
             cadAclDstPortOp 1.3.6.1.4.1.4998.1.1.35.1.6.1.14 cadextaclcondition read-only
Destination port condition (lt,gt,eq,ne) to match.
             cadAclDstPortLo 1.3.6.1.4.1.4998.1.1.35.1.6.1.15 integer32 read-only
First Destination port number to match. -1 indicates that this field is not used.
             cadAclDstPortHi 1.3.6.1.4.1.4998.1.1.35.1.6.1.16 integer32 read-only
Second Destination port number to match. -1 indicates that this field is not used
             cadAclLogging 1.3.6.1.4.1.4998.1.1.35.1.6.1.17 truthvalue read-only
Turn on or off the ACE matching log
             cadAclProtoType 1.3.6.1.4.1.4998.1.1.35.1.6.1.18 integer32 read-only
Sub-protocol qualifiers. For protocol type ICMP, this value matches the ICMP message type (0 - 255). For IGMP, this value matches the IGMP message type (0-15). A value of -1 means that this field is not used.
             cadAclProtoCode 1.3.6.1.4.1.4998.1.1.35.1.6.1.19 integer32 read-only
Sub-protocol qualifiers. For protocol type ICMP, this value matches the ICMP message type code (0 - 255). A value of -1 indicates this value is not used.
             cadAclIpTos 1.3.6.1.4.1.4998.1.1.35.1.6.1.20 cadiptos read-only
Matches the TOS field of the IP header.
             cadAclIpTosMask 1.3.6.1.4.1.4998.1.1.35.1.6.1.21 cadiptosmask read-only
Mask to apply to the IpTos object when finding a mactch on the TOS field of the IP header. A value of 0 is used to indicate that the TOS is not used.
             cadAclTcpFlags 1.3.6.1.4.1.4998.1.1.35.1.6.1.22 cadtcpflags read-only
Matches the flags field of the TCP header.
             cadAclTcpFlagsMask 1.3.6.1.4.1.4998.1.1.35.1.6.1.23 cadtcpflags read-only
Mask to apply to the TcpFlags object when finding a mactch on the flags field of the TCP header.
             cadAclFragments 1.3.6.1.4.1.4998.1.1.35.1.6.1.24 truthvalue read-only
Indicates whether this EACE applies to noninitial fragments of packets. The default is disabled.
             cadAclRemark 1.3.6.1.4.1.4998.1.1.35.1.6.1.26 cadaclstring read-only
The comment associated with the access control entry. This is only valid for ACEs of type remark.
             cadAclIpAddrType 1.3.6.1.4.1.4998.1.1.35.1.6.1.27 inetaddresstype read-only
IP Address type
     cadSnmpCommAccessTable 1.3.6.1.4.1.4998.1.1.35.1.7 no-access
A table contains the access list information associated with the community string. Each community string defined in snmpCommunithTable can be configured with one access list number. C4 can permit/deny access usnig access list filtering. Filtering will occur in software, after the SNMP traffic passed through the OSE protocol stack and received by the agent. Standard ACLs will be used to enforce the access restrictions
         cadSnmpCommAccessEntry 1.3.6.1.4.1.4998.1.1.35.1.7.1 no-access
A conceptual row containing information about access list filtering associated with community string.
             cadSnmpCommAccessName 1.3.6.1.4.1.4998.1.1.35.1.7.1.1 snmpadminstring no-access
The index value that uniquely identifies an entry in snmpCommunityTable.
             cadSnmpCommAccessList 1.3.6.1.4.1.4998.1.1.35.1.7.1.2 integer32 read-only
The value of this object identifies entry (or entries) in the cadPolicyAclTable. The identified entry (or entries) contains access parameters to be used when filtering traffic sent to SNMP agent.
             cadSnmpCommAccessStatus 1.3.6.1.4.1.4998.1.1.35.1.7.1.3 rowstatus read-only
Control Object for row creation and deletion.
     cadPolicyAccessGroupTable 1.3.6.1.4.1.4998.1.1.35.1.8 no-access
A table of access group policies applied to a physical interface.
         cadPolicyAccessGroupEntry 1.3.6.1.4.1.4998.1.1.35.1.8.1 no-access
An ordered list of the access group polices
             cadPolicyAccessGroupIfIndex 1.3.6.1.4.1.4998.1.1.35.1.8.1.1 interfaceindex no-access
The value of this object identifies a physical layer2 interface, such as a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which the access group policy is applied
             cadPolicyAccessGroupDirection 1.3.6.1.4.1.4998.1.1.35.1.8.1.2 cadifdirection no-access
Direction of traffic on interface to apply the access group policy
             cadPolicyAccessGroupStatus 1.3.6.1.4.1.4998.1.1.35.1.8.1.3 rowstatus read-only
This table supports sets of createAndGo(4) and destroy(6)
             cadPolicyAccessGroupIpv4AclNum 1.3.6.1.4.1.4998.1.1.35.1.8.1.4 integer32 read-only
ACL number. If the ACL does not exist, then this is treated as if the ACL type is none, i.e. all IPv4 traffic matches the policy.
             cadPolicyAccessGroupClearCounts 1.3.6.1.4.1.4998.1.1.35.1.8.1.5 truthvalue read-only
If set to true, clear the counts in the CadPolicyAccessGroupStatusEntry. When read, this field always returns false. The correct way to clear the counts is to first read them, then set ClearCounts to true.
             cadPolicyAccessGroupIpv6AclNum 1.3.6.1.4.1.4998.1.1.35.1.8.1.6 integer32 read-only
ACL number. If the ACL does not exist, then this is treated as if the ACL type is none, i.e. all IPv6 traffic matches the policy.
             cadPolicyAccessGroupIpv6AclName 1.3.6.1.4.1.4998.1.1.35.1.8.1.7 snmpadminstring read-only
ACL name.
     cadPolicyAccessGroupStatusTable 1.3.6.1.4.1.4998.1.1.35.1.9 no-access
A table of counts of rate limiting policies applied to a physical interface.
         cadPolicyAccessGroupStatusEntry 1.3.6.1.4.1.4998.1.1.35.1.9.1 no-access
Dyanmic status associated with a rate limit policy
             cadPolicyAccessGroupPermitPackets 1.3.6.1.4.1.4998.1.1.35.1.9.1.1 counter64 read-only
Number of packets conforming to the access group policy permit ACL
             cadPolicyAccessGroupDenyPackets 1.3.6.1.4.1.4998.1.1.35.1.9.1.2 counter64 read-only
Number of packets conforming to the access group policy deny ACL
             cadPolicyAccessGroupLastCleared 1.3.6.1.4.1.4998.1.1.35.1.9.1.3 timestamp read-only
The value of SysUptime when the access group policy counters were last cleared.
     cadPolicyPfxListTable 1.3.6.1.4.1.4998.1.1.35.1.11 no-access
Prefix List Table
           cadPolicyPfxListEntry 1.3.6.1.4.1.4998.1.1.35.1.11.1 no-access
A row in Prefix list table
               cadPolicyPfxListNumber 1.3.6.1.4.1.4998.1.1.35.1.11.1.1 integer32 read-only
Prefix list is identified by number value of 0 should be passed for this object if prefix list is configured by name
               cadPolicyPfxListName 1.3.6.1.4.1.4998.1.1.35.1.11.1.2 octet string read-only
Name of prefix list.Null value is assigned to this Object if the prefix list is identified by number
               cadPolicyPfxListSeqNumber 1.3.6.1.4.1.4998.1.1.35.1.11.1.3 integer32 read-only
A sequence in the prefix list is identified by sequence number. If no sequence is specified defalut sequence of 5 is assumend. IF one more sequence is configured sequence number 10 is assigned (multiples of 5)
               cadPolicyPfxListIpAddress 1.3.6.1.4.1.4998.1.1.35.1.11.1.4 inetaddress read-only
This is the source ipv4 or ipv6 address on which the filtering needs to be applied
               cadPolicyPfxListIpAddMaskLen 1.3.6.1.4.1.4998.1.1.35.1.11.1.5 integer32 read-only
Mask length of the Source IP address
               cadPolicyPfxListMaskGeValue 1.3.6.1.4.1.4998.1.1.35.1.11.1.6 integer32 read-only
If the received route matches the source address and the mask length is greater than the value specified, apply the specified action to the route
               cadPolicyPfxListMaskLeValue 1.3.6.1.4.1.4998.1.1.35.1.11.1.7 integer32 read-only
This value specifies if the received route mask length is less the value specified here do the action specified (permit/deny)
               cadPolicyPfxListAction 1.3.6.1.4.1.4998.1.1.35.1.11.1.8 cadpolicyaction read-only
specifies the action to be taken. Possible actions include permit(1) and deny(2)
               cadPolicyPfxListStatus 1.3.6.1.4.1.4998.1.1.35.1.11.1.9 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
               cadPolicyPfxListAfi 1.3.6.1.4.1.4998.1.1.35.1.11.1.10 inetaddresstype no-access
This is the Address Family Identifier (AFI) of the prefix that will follow. Only IPv4 or IPv6 prefix-list will be supported.
               cadPolicyPfxListSafi 1.3.6.1.4.1.4998.1.1.35.1.11.1.11 integer no-access
This is the Subsequent Address Family Identifier (SAFI) of the prefix that will follow. Enumeration: 'unicast': 1, 'both': 3, 'multicast': 2, 'mplsBgpVpn': 128.
     cadPolicyDistListOutTable 1.3.6.1.4.1.4998.1.1.35.1.12 no-access
Distribute List Out Table
           cadPolicyDistListOutEntry 1.3.6.1.4.1.4998.1.1.35.1.12.1 no-access
A row in Distribute List Out table
               cadPolicyDistListOutSrcProtocol 1.3.6.1.4.1.4998.1.1.35.1.12.1.1 cadpolicyprotocol read-only
Source Protocol under which distribute list is configured.
               cadPolicyDistListOutSrcProtocolProcess 1.3.6.1.4.1.4998.1.1.35.1.12.1.2 integer32 read-only
Source VRF ID under which distribute list is configured.
               cadPolicyDistListOutRoutingProtocol 1.3.6.1.4.1.4998.1.1.35.1.12.1.3 cadpolicyprotocol read-only
Destination Protocol to which routes need to be sent.
               cadPolicyDistListOutRoutingProcess 1.3.6.1.4.1.4998.1.1.35.1.12.1.4 integer32 read-only
Destination VRF ID under which distribute list is configured.
               cadPolicyDistListOutAutonomousSystemNum 1.3.6.1.4.1.4998.1.1.35.1.12.1.5 integer32 read-only
Autonomous system number of BGP to which routes need to be redistributed. If destination protocol is BGP appropriate AS number needs to be filled for this object. Otherwise set a value of 1 for this object.
               cadPolicyDistListOutAccessListNum 1.3.6.1.4.1.4998.1.1.35.1.12.1.6 integer32 read-only
The configured distribute out list refers to the access list specified. The access list number must be in the range of 1 - 99
               cadPolicyDistListOutAccessListName 1.3.6.1.4.1.4998.1.1.35.1.12.1.7 octet string read-only
Name of the access list referred by distribute list. The access list name must be less than 32 characters
               cadPolicyDistListOutStatus 1.3.6.1.4.1.4998.1.1.35.1.12.1.8 rowstatus read-only
The row status variable, used according to row installation and removal conventions. Once access list specified default row status is UP.
               cadPolicyDistListOutIfIndex 1.3.6.1.4.1.4998.1.1.35.1.12.1.9 interfaceindex read-only
Interface for which distribute list is applied. The value will be 1 if the distribute list is applied to all interfaces.
     cadDistListOutTable 1.3.6.1.4.1.4998.1.1.35.1.13 no-access
Distribute List Out Table
           cadDistListOutEntry 1.3.6.1.4.1.4998.1.1.35.1.13.1 no-access
A row in Distribute List Out table
               cadDistListOutVrIndex 1.3.6.1.4.1.4998.1.1.35.1.13.1.1 integer32 read-only
virtual router index
               cadDistListOutDestProtocol 1.3.6.1.4.1.4998.1.1.35.1.13.1.2 infosourcedest read-only
Destination protocol for which distribute list is applied.
               cadDistListOutSrcProtocol 1.3.6.1.4.1.4998.1.1.35.1.13.1.3 infosourcedest read-only
Source protocol for which distribute list is applied.
               cadDistListOutAccessListNum 1.3.6.1.4.1.4998.1.1.35.1.13.1.4 integer32 read-only
Access List Number
               cadDistListOutStatus 1.3.6.1.4.1.4998.1.1.35.1.13.1.5 rowstatus read-only
The row status variable, used according to row installation and removal conventions. Once access list specified default row status is active.
               cadDistListOutAccessListName 1.3.6.1.4.1.4998.1.1.35.1.13.1.6 snmpadminstring read-only
Access List Name
     cadAclNameTable 1.3.6.1.4.1.4998.1.1.35.1.14 no-access
This table maps names to ACL entries. Each row associates a name with the indexed ACL.
           cadAclNameEntry 1.3.6.1.4.1.4998.1.1.35.1.14.1 no-access
A conceptual row containing name information about an ACL.
               cadNameAclName 1.3.6.1.4.1.4998.1.1.35.1.14.1.1 snmpadminstring no-access
The name of the access control list.
               cadNameAclNumber 1.3.6.1.4.1.4998.1.1.35.1.14.1.2 integer32 no-access
Extended ACL number. Extended ACLs are in the range 100-199. Standard ACLs are in the range 1-99.
               cadNameAclStatus 1.3.6.1.4.1.4998.1.1.35.1.14.1.3 rowstatus read-only
RowStatus used to add and remove names for ACLs. When an ACL is removed, the associated name is also removed.
     cadAclControl 1.3.6.1.4.1.4998.1.1.35.1.15
           cadAclOrderAcl 1.3.6.1.4.1.4998.1.1.35.1.15.1 truthvalue read-write
This variable always returns false(2) upon reading. When set to true(1), the ACL identified in cadAclOrderAclIndex is renumbered with interval cadAclOrderAclInterval.
           cadAclOrderAclIndex 1.3.6.1.4.1.4998.1.1.35.1.15.2 integer read-write
This variable identifies the ACL that should be renumbered.
           cadAclOrderAclInterval 1.3.6.1.4.1.4998.1.1.35.1.15.3 integer read-write
This variable specifies the numbering interval used between each ACE when reordering an ACL.
           cadAclOrderAclStart 1.3.6.1.4.1.4998.1.1.35.1.15.4 integer read-write
This variable specifies the index that ACL reordering will use as the base for the first ACE.
           cadAclClearIpv4AclCounts 1.3.6.1.4.1.4998.1.1.35.1.15.5 integer32 read-write
This variable specifies the access list number for which all IPv4 per-entry counts will be cleared. This number may correspond to an individual access list (1..199). Setting to '0' will cause the per-entry counts to be cleared for ALL IPv4 configured access lists. This variable always returns '0' upon reading
           cadAclClearIpv6AclCounts 1.3.6.1.4.1.4998.1.1.35.1.15.6 integer32 read-write
This variable specifies the access list number for which all IPv6 per-entry counts will be cleared. This number may correspond to an individual access list (200..399). Setting to '0' will cause the per-entry counts to be cleared for ALL IPv6 configured access lists. This variable always returns '0' upon reading
     cadPolicyAclExtTable 1.3.6.1.4.1.4998.1.1.35.1.16 no-access
The cadPolicyAclExtTable augments the cadPolicyAclTable with a count for total number of times the access list entry has been matched by all referencing applications.
           cadPolicyAclExtEntry 1.3.6.1.4.1.4998.1.1.35.1.16.1 no-access
Information about the policy access list entry.
               cadAclEntryCount 1.3.6.1.4.1.4998.1.1.35.1.16.1.1 counter64 read-only
Total number of times the access list entry has been matched by all referencing applications.
     cadPolicyRouting 1.3.6.1.4.1.4998.1.1.35.1.30
           cadRouteMapTagTable 1.3.6.1.4.1.4998.1.1.35.1.30.1 no-access
This table maps policy route map names to route map entries. Each row associates a name with the indexed policy route map.
               cadRouteMapTagEntry 1.3.6.1.4.1.4998.1.1.35.1.30.1.1 no-access
A conceptual row containing name information for a policy route map.
                   cadRouteMapTagName 1.3.6.1.4.1.4998.1.1.35.1.30.1.1.1 snmpadminstring no-access
Name to used for this policy route map
                   cadRouteMapTagId 1.3.6.1.4.1.4998.1.1.35.1.30.1.1.2 integer32 read-only
Id used to associate entries in the policy route map table to this name.
                   cadRouteMapTagRowStatus 1.3.6.1.4.1.4998.1.1.35.1.30.1.1.3 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
           cadRouteMapTable 1.3.6.1.4.1.4998.1.1.35.1.30.2 no-access
This table contains policy route map data where each row contains information about the ACL being used and what set operations should be applied to the IP packet on a match.
               cadRouteMapEntry 1.3.6.1.4.1.4998.1.1.35.1.30.2.1 no-access
A conceptual row containing information for a policy route map entry.
                   cadRouteMapId 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.1 integer32 no-access
Id used to associate entries in the policy route map table.
                   cadRouteMapSeqNum 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.2 integer32 no-access
Sequence number used to order the match statements.
                   cadRouteMapMatchType 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.3 integer read-only
Type of match to used for this entry. Permit matches on the provided ACL and then applies the defined set operations before destination routing. Deny matches on the provided ACL and then directly routes to the destination without applying any of the set critera to the packet. Enumeration: 'deny': 2, 'permit': 1.
                   cadRouteMapMatchAcl 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.4 integer32 read-only
ACL used to match the incoming packet. Since IPv4 is the only supported address type, the ACL number must be an extended or standard ACL. A value 0 implies that no ACL is used and all packets will match this entry.
                   cadRouteMapSetIpPrec 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.5 truthvalue read-only
Indicates whether the IP Precedence should be changed on the packet if it matches the ACL and this is a permit type of match.
                   cadRouteMapIpPrec 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.6 integer read-only
The IP precedence value that should be used to replace the existing IP precedence of the matching packet. Enumeration: 'flash-override': 4, 'network': 7, 'flash': 3, 'internet': 6, 'immediate': 2, 'priority': 1, 'critical': 5, 'routine': 0.
                   cadRouteMapSetIpTos 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.7 truthvalue read-only
Indicates whether the IP TOS should be changed on the packet if it matches the ACL and this is a permit type of match.
                   cadRouteMapIpTos 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.8 integer read-only
The IP TOS value that should be used to replace the existing IP TOS of the matching packet. Enumeration: 'min-delay': 8, 'max-reliability': 2, 'min-monetary-cost': 1, 'max-throughput': 4, 'normal': 0.
                   cadRouteMapSetNextHop 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.9 truthvalue read-only
Indicates whether the next hop setting should be used to specify the adjacent next hop router when forwarding the matching packet.
                   cadRouteMapNextHopAddrType 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.10 inetaddresstype read-only
The address type of the next hop and backup next hop addresses. Currently IPv4 is the only supported address type.
                   cadRouteMapNextHop 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.11 inetaddress read-only
The address of the adjacent next hop router to use in forwading the matching packet. The next hop router address must be the address of an ajacent router, and the routing table (VRF?) is used to verify that the address can be directly reached. Only IPv4 addresses are currently supported.
                   cadRouteMapSetBackupNextHop 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.12 truthvalue read-only
Indicates whether the backup next hop setting should be used to specify the adjacent next hop router when forwarding the matching packet. This only would be done if the primary next hop was not set or was unreachable.
                   cadRouteMapBackupNextHop 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.13 inetaddress read-only
The address type of a second next hop, that can be used only if the primary next hop address can not be reached. Only Ipv4 addresses are currently supported.
                   cadRouteMapSetNullInterface 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.14 truthvalue read-only
If set to true and the packet matches the ACL, it will be dropped.
                   cadRouteMapRowStatus 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.15 rowstatus read-only
The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
                   cadRouteMapSetIpDscp 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.16 truthvalue read-only
Indicates whether the IP DSCP should be changed on the packet if it matches the ACL and this is a permit type of match.
                   cadRouteMapIpDscp 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.17 integer read-only
The IP DSCP value that should be used to replace the existing IP DSCP of the matching packet.
                   cadRouteMapSetRecursiveNextHop 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.18 truthvalue read-only
Indicates whether the recursive next hop setting should be used to specify the next hop for the remote router when forwarding the matching packet.
                   cadRouteMapRecursiveNextHop 1.3.6.1.4.1.4998.1.1.35.1.30.2.1.19 inetaddress read-only
The address type of a remote router next hop, that is used to perform a recursive route lookup. Only Ipv4 addresses are currently supported.
           cadRouteMapStatsTable 1.3.6.1.4.1.4998.1.1.35.1.30.3 no-access
This table contains policy route map counts where each row contains information about the number of packets that match the specified ACL and were successfully changed with the defined set operations, as well as those that matched the ACL but failed the set operations.
               cadRouteMapStatsEntry 1.3.6.1.4.1.4998.1.1.35.1.30.3.1 no-access
A conceptual row containing counts information for a policy route map entry.
                   cadRouteMapPktMatched 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.1 counter32 read-only
The number of packets that match the ACL defined in the route map entry and where the action was also successful. For matches of type deny, the packet is routed by destination, and for packets of type match, the packet is successfully modified and sent.
                   cadRouteMapByteMatched 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.2 counter64 read-only
The number of bytes that match the ACL defined in the route map entry and where the action was also successful. For matches of type deny, the packet is routed by destination, and for packets of type match, the packet is successfully modified and sent.
                   cadRouteMapPktFailed 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.3 counter32 read-only
The number of packets that match the ACL defined in the route map entry and where the action failed. For route map entries of type match, the set operation failed.
                   cadRouteMapByteFailed 1.3.6.1.4.1.4998.1.1.35.1.30.3.1.4 counter64 read-only
The number of packets that match the ACL defined in the route map entry and where the action failed. For route map entries of type match, the set operation failed.
           cadRouteMapClearStats 1.3.6.1.4.1.4998.1.1.35.1.30.4 integer32 read-write
Setting this value will reset all the byte and packet counts for a route map. A value of 0 indicates no reset is performed.
           cadLocalPolicyRouteMap 1.3.6.1.4.1.4998.1.1.35.1.30.5 integer32 read-write
This value contains the mapId of the policy route map to be used for local policy based routing. A value of 0 indicates no local policy routing is performed.