CADANT-CMTS-PACKETCABLE-MIB: View SNMP OID List / Download MIB

VENDOR: CADANT INC.


 Home MIB: CADANT-CMTS-PACKETCABLE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CADANT-CMTS-DOWNCHANNEL-MIB, DOCS-QOS3-MIB, CADANT-CMTS-PROCESS-MIB, CADANT-PRODUCTS-MIB, SNMPv2-TC, CADANT-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cadPCMIB 1.3.6.1.4.1.4998.1.1.115
PacketCable general-purpose management MIB. This MIB contains objects which are specific to PacketCable but not covered in any of the more-specialized MIBS.
         cadPCMibObjects 1.3.6.1.4.1.4998.1.1.115.1
             cadPCMibBase 1.3.6.1.4.1.4998.1.1.115.1.1
                 cadPCPreemptionAllowed 1.3.6.1.4.1.4998.1.1.115.1.1.3 truthvalue read-write
Indicates whether the system will preempt another session for an emergency call.
                 cadPCUpNormAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.4 integer read-write
Maximum percentage of upstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources non-exclusively allocated to sessions of this type
                 cadPCUpNormResUsage 1.3.6.1.4.1.4998.1.1.115.1.1.5 integer read-write
Minimum percentage of upstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources exclusively allocated to sessions of this type. If the value of this object is non-zero, then a portion of the upstream bandwidth will be set aside for normal telephony use only - reducing the bandwidth that is available for normal data.
                 cadPCUpEmerAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.6 integer read-write
Maximum percentage of upstream resources that may be used by emergency telephony services.
                 cadPCUpEmerResUsage 1.3.6.1.4.1.4998.1.1.115.1.1.7 integer read-write
Minimum percentage of upstream resources that may be used by emergency telephony services. If the value of this object is non-zero, then a portion of the upstream bandwidth will be set aside for emercency telephony use only - reducing the bandwidth that is available for normal data.
                 cadPCDownNormAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.8 integer read-write
Maximum percentage of downstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources non-exclusively allocated to sessions of this type
                 cadPCDownNormResUsage 1.3.6.1.4.1.4998.1.1.115.1.1.9 integer read-write
Minimum percentage of downstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources exclusively allocated to sessions of this type. If the value of this object is non-zero, then a portion of the upstream bandwidth will be set aside for normal telephony use only - reducing the bandwidth that is available for normal data.
                 cadPCDownEmerAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.10 integer read-write
Maximum percentage of downstream resources that may be used by emergency telephony services.
                 cadPCDownEmerResUsage 1.3.6.1.4.1.4998.1.1.115.1.1.11 integer read-write
Minimum percentage of downstream resources that may be used by emergency telephony services. If the value of this object is non-zero, then a portion of the upstream bandwidth will be set aside for normal telephony use only - reducing the bandwidth that is available for normal data.
                 cadPCCAMTable 1.3.6.1.4.1.4998.1.1.115.1.1.12 no-access
Table of Per-CAM PacketCable Data for 2D12U only
                       cadPCCAMEntry 1.3.6.1.4.1.4998.1.1.115.1.1.12.1 no-access
This entry contains all of the PacketCable data that is to be managed on a per-CAM basis.
                           cadFreeDSxAllowed 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.1 truthvalue read-write
Indicates whether the authorization module will allow a DOCSIS MAC Messaging Dynamic Services request (DSx) without a gate-ID in an authorization block.
                           cadPCMaxOverloadDSaCalls 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.2 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a normal condition, i.e. no overload.
                           cadPCMaxYellowOverloadDSaCalls 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.3 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a yellow overload condition.
                           cadPCMaxRedOverloadDSaCalls 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.4 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a red overload condition.
                           cadPCCardId 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.5 cardid no-access
The unique id of this card within the shelf.
                 cadPCAdminState 1.3.6.1.4.1.4998.1.1.115.1.1.13 adminstate read-write
The administrative state of PacketCable services on the CMTS.
                 cadPCMaxOverloadCalls 1.3.6.1.4.1.4998.1.1.115.1.1.14 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a normal condition, i.e. no overload.
                 cadPCMaxYellowOverloadCalls 1.3.6.1.4.1.4998.1.1.115.1.1.15 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a yellow overload condition.
                 cadPCMaxRedOverloadCalls 1.3.6.1.4.1.4998.1.1.115.1.1.16 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a red overload condition.
                 cadPCDownTotalAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.17 integer read-write
Maximum percentage of downstream resources that may be used by both normal and emergency telephony services.
                 cadPCUpTotalAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.18 integer read-write
Maximum percentage of upstream resources that may be used by both normal and emergency telephony services.
                 cadPCMaxOverloadGateMsgs 1.3.6.1.4.1.4998.1.1.115.1.1.19 unsigned32 read-write
the max number of gate messages that the system will process per 10 second interval when the system cpu is in a normal condition, i.e. no overload.
                 cadPCMaxYellowOverloadGateMsgs 1.3.6.1.4.1.4998.1.1.115.1.1.20 unsigned32 read-write
the max number of gate messages that the system will process per 10 second interval when the system cpu is in a yellow overload condition.
                 cadPCMaxRedOverloadGateMsgs 1.3.6.1.4.1.4998.1.1.115.1.1.21 unsigned32 read-write
the max number of gate messages that the system will process per 10 second interval when the system cpu is in a red overload condition.
                 cadPCClearGateCounts 1.3.6.1.4.1.4998.1.1.115.1.1.25 truthvalue read-write
set to true to clear the gate counts, always false when read
                 cadPCClearAnomalyCounts 1.3.6.1.4.1.4998.1.1.115.1.1.26 truthvalue read-write
set to true to clear the anomaly counts, always false when read
                 cadPCClearConnRateOverloadCounts 1.3.6.1.4.1.4998.1.1.115.1.1.27 truthvalue read-write
set to true to clear the connection rate overload counts, always false when read
                 cadPCClearEvMsgCounts 1.3.6.1.4.1.4998.1.1.115.1.1.28 truthvalue read-write
set to true to clear the event messaging counts, always false when read
                 cadPCClearCopsCounts 1.3.6.1.4.1.4998.1.1.115.1.1.29 truthvalue read-write
set to true to clear the COPS counts, always false when read
                 cadPCClearGateCtlCounts 1.3.6.1.4.1.4998.1.1.115.1.1.30 truthvalue read-write
set to true to clear the gate control counts, always false when read
                 cadPCMibGateCounts 1.3.6.1.4.1.4998.1.1.115.1.1.40
                       cadPCTotalGateCount 1.3.6.1.4.1.4998.1.1.115.1.1.40.1 counter32 read-only
Total number of gates that have been created since the last reboot of the system or since the last time that this counter was manually reset.
                       cadPCGateAllocatedStateCount 1.3.6.1.4.1.4998.1.1.115.1.1.40.2 counter32 read-only
Total number of gates that are currently in the ALLOCATED state
                       cadPCGateAuthorizedStateCount 1.3.6.1.4.1.4998.1.1.115.1.1.40.3 counter32 read-only
Total number of gates that are currently in the AUTHORIZED state
                       cadPCGateReservedStateCount 1.3.6.1.4.1.4998.1.1.115.1.1.40.4 counter32 read-only
Total number of gates that are currently in the RESERVED state
                       cadPCGateCommittedStateCount 1.3.6.1.4.1.4998.1.1.115.1.1.40.5 counter32 read-only
Total number of gates that are currently in the COMMITTED state
                       cadPCGateLastCleared 1.3.6.1.4.1.4998.1.1.115.1.1.40.6 timestamp read-only
The value of sysUptime when the gate counts were last cleared.
                 cadPCAnomalyCountTable 1.3.6.1.4.1.4998.1.1.115.1.1.45 no-access
Table of anomaly counts
                       cadPCAnomalyCountEntry 1.3.6.1.4.1.4998.1.1.115.1.1.45.1 no-access
Entry of anomaly counts
                           cadPCAnomalyCode 1.3.6.1.4.1.4998.1.1.115.1.1.45.1.1 cadpcanomalycode no-access
PacketCable anomaly code
                           cadPCAnomalyCount 1.3.6.1.4.1.4998.1.1.115.1.1.45.1.2 counter32 read-only
Count of anomalies of the corresponding type that have occurred since boot or since the last manual reset of this count.
                 cadPCAnomalyLastCleared 1.3.6.1.4.1.4998.1.1.115.1.1.46 timestamp read-only
The value of sysUptime when the anomaly counts were last cleared.
                 cadPCSendSubId 1.3.6.1.4.1.4998.1.1.115.1.1.47 truthvalue read-write
Indicates whether the C4 will send a subscriber ID in every DQoS gate-open and gate-close message. This is provisioned per-CMTS. ECN DQOS1.5-N-06.0339-4
                 cadPCConnRateReqHistoryTable 1.3.6.1.4.1.4998.1.1.115.1.1.50 no-access
Table of connection request rate history
                       cadPCConnRateReqHistoryEntry 1.3.6.1.4.1.4998.1.1.115.1.1.50.1 no-access
Entry of connection request rate
                           cadPCConnRateReqHistoryTimeStamp 1.3.6.1.4.1.4998.1.1.115.1.1.50.1.1 timestamp no-access
Value of sysUpTime (rounded down to the nearest second) when this entry was created
                           cadPCConnRateReqHistoryCount 1.3.6.1.4.1.4998.1.1.115.1.1.50.1.2 counter32 read-only
Count of connection requests (gates) made during the second
                 cadPCConnReqMaxHistRate 1.3.6.1.4.1.4998.1.1.115.1.1.51 counter32 read-only
Maximum value of any cadPCConnReqRateCount since system boot or reset of this value.
                 cadPCConnRateOverloadRejTable 1.3.6.1.4.1.4998.1.1.115.1.1.55 no-access
Table of Per-card rate overload reject connection counts
                       cadPCConnRateOverloadRejEntry 1.3.6.1.4.1.4998.1.1.115.1.1.55.1 no-access
This entry contains the connection rate overload rejection counts.
                           cadPCConnRateOverloadRejCount 1.3.6.1.4.1.4998.1.1.115.1.1.55.1.1 counter32 read-only
Number of connections that have been rejected as a result of rate overload protection while the system is in the corresponding system-wide overload state since the last system reboot or since the last time that this counter was reset.
                           cadPCConnRateOverloadRejCardId 1.3.6.1.4.1.4998.1.1.115.1.1.55.1.2 cardid no-access
The unique id of this card within the shelf.
                 cadPCConnRateOverloadLastCleared 1.3.6.1.4.1.4998.1.1.115.1.1.56 timestamp read-only
The value of sysUptime when the connection rate overload counts were last cleared.
                 cadPCEvMsgCountTable 1.3.6.1.4.1.4998.1.1.115.1.1.60 no-access
Table of counts of event messages that have been transmitted to each RKS or DF (for Electronic Surveillance Call Data) server
                       cadPCEvMsgCountEntry 1.3.6.1.4.1.4998.1.1.115.1.1.60.1 no-access
This entry contains counts of event messages that have been transmitted
                           cadPCEvMsgCountServer 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.1 ipaddress no-access
IP address of RKS or DF server
                           cadPCEvMsgServerIsDF 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.2 truthvalue no-access
Indicator of type of server. Set to true(1) if server is a delivery function server.
                           cadPCEvMsgType 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.3 integer read-only
Type of message being counted. These map directly to the event message opcodes in the Event Messaging reference Enumeration: 'total-packets': 9999, 'qos-reserve': 7, 'qos-release': 8, 'qos-commit': 19, 'time-change': 17.
                           cadPCEvMsgCount 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.4 counter32 read-only
Count of rejected connections due to channel bandwidth congestion since boot or since the last manual reset of this count.
                 cadPCEvMsgCountLastCleared 1.3.6.1.4.1.4998.1.1.115.1.1.61 timestamp read-only
The value of sysUptime when the event messaging counts were last cleared.
                 cadPCCopsCountTable 1.3.6.1.4.1.4998.1.1.115.1.1.65 no-access
Table of counts of event messages that have been sent to or received from each server.
                       cadPCCopsCountEntry 1.3.6.1.4.1.4998.1.1.115.1.1.65.1 no-access
This entry contains counts of COPS messages.
                           cadPCCopsServer 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.1 ipaddress no-access
IP address of CMS or PS server
                           cadPCCopsDirection 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.2 integer no-access
direction of message flow from viewpoint of the CMTS Enumeration: 'receive': 1, 'transmit': 2.
                           cadPCCopsOpcode 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.3 integer no-access
Type of message being counted. These map directly to the COPS opcodes in RFC 2748. Enumeration: 'copsSsc': 10, 'copsOpn': 6, 'copsCat': 7, 'tcpCxt': 0, 'copsReq': 1, 'copsCC': 8, 'copsSsq': 5, 'copsRpt': 3, 'copsDec': 2, 'copsKa': 9, 'copsDrq': 4.
                           cadPCCopsCount 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.4 counter32 read-only
Count of COPS messages
                 cadPCCopsCountLastCleared 1.3.6.1.4.1.4998.1.1.115.1.1.66 timestamp read-only
The value of sysUptime when the COPS counts were last cleared.
                 cadPCGateCtlCountTable 1.3.6.1.4.1.4998.1.1.115.1.1.70 no-access
Table of counts of event messages that have been sent to or received from each server.
                       cadPCGateCtlCountEntry 1.3.6.1.4.1.4998.1.1.115.1.1.70.1 no-access
This entry contains counts of gate control messages.
                           cadPCGateCtlOpcode 1.3.6.1.4.1.4998.1.1.115.1.1.70.1.1 integer no-access
Type of message being counted. These map directly to the gate command type opcodes in the DQoS spec. Enumeration: 'gateOpen': 13, 'gateClose': 14, 'gateSetErr': 6, 'gateReportState': 15, 'gateInfoAck': 8, 'gateAllocReq': 1, 'gateDeleteAck': 11, 'gateSetReq': 4, 'gateSetAck': 5, 'gateAllocErr': 3, 'gateDeleteReq': 10, 'gateInfoReq': 7, 'gateInfoErr': 9, 'gateAllocAck': 2, 'gateDeleteErr': 12.
                           cadPCGateCtlCount 1.3.6.1.4.1.4998.1.1.115.1.1.70.1.2 counter32 read-only
Count of messages since boot or since the last manual reset of this count.
                 cadPCGateCtlCountLastCleared 1.3.6.1.4.1.4998.1.1.115.1.1.71 timestamp read-only
The value of sysUptime when the gate control counts were last cleared.
                 cadPCDefAdmCtlTable 1.3.6.1.4.1.4998.1.1.115.1.1.75 no-access
Table of Per-Priority PacketCable admission control policies
                       cadPCDefAdmCtlEntry 1.3.6.1.4.1.4998.1.1.115.1.1.75.1 no-access
This entry contains all of the default PacketCable admission policy data.
                           cadPCDefAdmCtlDirection 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.1 ifdirection no-access
Direction for this default policy data.
                           cadPCDefAdmCtlPriority 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.2 cadpcadmctlpriority no-access
Priority value assigned to this row.
                           cadPCDefAdmCtlAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.3 integer read-write
Maximum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources non-exclusively allocated to sessions of this type
                           cadPCDefAdmCtlReservedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.4 integer read-write
Minimum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources exclusively allocated to sessions of this type. If the value of this object is non-zero, then a portion of the bandwidth will be set aside for this priority only - reducing the bandwidth that is available for normal data.
                 cadPC1xAdmCtlMapTable 1.3.6.1.4.1.4998.1.1.115.1.1.80 no-access
Table of mappings of PacketCable 1.x to PacketCable Multimedia admission control policies
                       cadPC1xAdmCtlMapEntry 1.3.6.1.4.1.4998.1.1.115.1.1.80.1 no-access
This entry contains mapping of one PacketCable 1.x admission policy to a PacketCable Multimedia policy.
                           cadPC1xAdmCtlMapPriority 1.3.6.1.4.1.4998.1.1.115.1.1.80.1.1 integer no-access
PacketCable 1.x session class priority value Enumeration: 'undefined': 1, 'emergency': 3, 'normal': 2.
                           cadPCAdmCtlMapPriority 1.3.6.1.4.1.4998.1.1.115.1.1.80.1.2 cadpcadmctlpriority read-only
PacketCable Multimedia Priority value assigned to this row.
                 cadPCInterfaceAdmCtlTable 1.3.6.1.4.1.4998.1.1.115.1.1.85 no-access
Table of Per-Priority PacketCable admission control policies. There exists a row per cable downstream and per cable upstream for each of the CadPCAdmCtlPriorities. For 1D:8U CAMs, the ifTypes populated are 128(downstream) and 129(upstream). For DOCSIS 2.0 CAMs (2D:12U), the ifTypes covered are 128(downstream) and 205(logical upstream).
                       cadPCInterfaceAdmCtlEntry 1.3.6.1.4.1.4998.1.1.115.1.1.85.1 no-access
This entry contains all of the default PacketCable admission policy data.
                           cadPCInterfaceAdmCtlPriority 1.3.6.1.4.1.4998.1.1.115.1.1.85.1.1 cadpcadmctlpriority no-access
Priority value assigned to this row.
                           cadPCInterfaceAdmCtlAllowedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.85.1.2 integer read-write
Maximum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources non-exclusively allocated to sessions of this type
                           cadPCInterfaceAdmCtlReservedUsage 1.3.6.1.4.1.4998.1.1.115.1.1.85.1.3 integer read-write
Minimum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources exclusively allocated to sessions of this type. If the value of this object is non-zero, then a portion of the bandwidth will be set aside for this priority only - reducing the bandwidth that is available for normal data.
                 cadPCCAMCblMacTable 1.3.6.1.4.1.4998.1.1.115.1.1.86 no-access
Table of Per-CAM PacketCable Data
                       cadPCCAMCblMacEntry 1.3.6.1.4.1.4998.1.1.115.1.1.86.1 no-access
This entry contains all of the PacketCable data that is to be managed on a per-mac domain basis.
                           cadPCCAMCblMacIfIndex 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.1 interfaceindex no-access
Indicates whether the authorization module will allow a DOCSIS MAC Messaging Dynamic Services request (DSx) without a gate-ID in an authorization block.
                           cadPCCAMCblMacFreeDSxAllowed 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.2 truthvalue read-write
Indicates whether the authorization module will allow a DOCSIS MAC Messaging Dynamic Services request (DSx) without a gate-ID in an authorization block.
                           cadPCCblMacMaxOverloadDSaCalls 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.3 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a normal condition, i.e. no overload.
                           cadPCCblMacMaxYellowOverloadDSaCalls 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.4 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a yellow overload condition.
                           cadPCCblMacMaxRedOverloadDSaCalls 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.5 unsigned32 read-write
the max number of connections we will allow per 10 second interval when the system cpu is in a red overload condition.
                 cadPCPEPIDHostname 1.3.6.1.4.1.4998.1.1.115.1.1.90 truthvalue read-write
If set to true, the PEP-ID on the COPS connection will set to the currently configured hostname of the CMTS. If false, the PEP-ID will will be set to the local IP address of the COPS connection.