C-PRODUCT-MCPU-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: C-PRODUCT-MCPU-MIB
Download as:   
C-PRODUCT-BASE-MIB, SNMPv2-CONF, SNMPv2-SMI, C-PRODUCT-GROUP-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mcpuVc 1.3.6.1.4.1.43.1.12.1.1.18.1
 mcpuNewVc 1.3.6.1.4.1.43.1.12.1.1.18.2
     mcpuNewVcTable 1.3.6.1.4.1.43.1.12.1.1.18.2.1 no-access
The mcpu VC information table.
         mcpuNewVcEntry 1.3.6.1.4.1.43.1.12.1.1.18.2.1.1 no-access
Information about a MCPU VC. The slot number (vcPortSlot) of the MCPU card should be 1. The port number (vcPortPort) should be 1.
             mcpuNewVcShaper 1.3.6.1.4.1.43.1.12.1.1.18.2.1.1.1 integer read-write
Data rate supported by the MCPU VC. Enumeration: 'dr-238M': 10, 'dr-673K': 5, 'dr-149M': 7, 'dr-17M': 15, 'dr-448K': 4, 'dr-1536M': 8, 'dr-6M': 12, 'dr-112K': 2, 'dr-10M': 14, 'dr-224K': 3, 'dr-4M': 11, 'dr-8M': 13, 'dr-192M': 9, 'dr-1344K': 6, 'dr-56K': 1.
             mcpuNewVcIpAddress 1.3.6.1.4.1.43.1.12.1.1.18.2.1.1.2 ipaddress read-write
Management VC IP address.
             mcpuNewVcSubnetMask 1.3.6.1.4.1.43.1.12.1.1.18.2.1.1.3 ipaddress read-write
Management VC IP subnet mask.
 shaper 1.3.6.1.4.1.43.1.12.1.1.18.3
     shaperTable 1.3.6.1.4.1.43.1.12.1.1.18.3.1 no-access
The shaper Table contains up to 15 shapers rate. This table uses cardSlot and Shaper number as an index which is uniquely assoicate to entry of each shaper.
         shaperEntry 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1 no-access
Each entry in the table contains the information of a shaper.
             shaperNumber 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.1 integer no-access
Shaper Number of a frame based card
             shaperSustainableCellRateInbps 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.2 integer read-write
Sustainable Cell Rate (SCR), in bits per second, is an upper bound on the conforming average rate of an ATM connection over time scales.
             shaperSustainableCellRateIncps 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.3 integer read-only
Sustainable Cell Rate (SCR), in cells per second, is an upper bound on the conforming average rate of an ATM connection over time scales. The value is calculated based on the input from SCR in bps.
             shaperPeakCellRateInbps 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.4 integer read-write
Peak Cell Rate (PCR), in bits per second, is the rate at which ATM source end system can send to a referenced physical service access point that is equal to the inverse of the minimum cell interarrival time. The value of Peak Rate Cell Rate (PCR) cannot be lower than Sustainable Cell Rate (SCR).
             shaperPeakCellRateIncps 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.5 integer read-only
Peak Cell Rate (PCR), in cells per second, is the rate at which ATM source end system can send to a referenced physical service access point that is equal to the inverse of the minimum cell interarrival time. The value of Peak Rate Cell Rate (PCR) is calculated based on the input from PCR in bps.
             shaperMaximumBurstSizeInBits 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.6 integer read-only
Maximum Burst Size in bits. This value is read only and is calculated again when MBS (in cells) is changed
             shaperMaximumBurstSizeInCells 1.3.6.1.4.1.43.1.12.1.1.18.3.1.1.7 integer read-write
Maximum Burst Size in cells. Minimum value is 1 cell and maximum value is 255 cells.