BROTHER-MIB: View SNMP OID List / Download MIB
VENDOR: BROTHER INDUSTRIES
| Home | MIB: BROTHER-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| brother | 1.3.6.1.4.1.2435 | |||
| nm | 1.3.6.1.4.1.2435.2 | |||
| system | 1.3.6.1.4.1.2435.2.3 | |||
| net_peripheral | 1.3.6.1.4.1.2435.2.3.9 | |||
| net_printer | 1.3.6.1.4.1.2435.2.3.9.1 | |||
| generalDeviceStatus | 1.3.6.1.4.1.2435.2.3.9.1.1 | |||
| status | 1.3.6.1.4.1.2435.2.3.9.1.1.2 | |||
| brJamPlace | 1.3.6.1.4.1.2435.2.3.9.1.1.2.9 | integer | read-only |
Location of JAM. 0:No Jam 1:Jam Trays 2:Jam Inside 3:Jam Rear 4:Jam Duplex unit |
| tonerlow | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10 | |||
| brToner1Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.1 | integer | read-only |
Black Toner status. 0:Toner Full 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| brToner2Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.2 | integer | read-only |
Cyan Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| brToner3Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.3 | integer | read-only |
Magenta Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| brToner4Low | 1.3.6.1.4.1.2435.2.3.9.1.1.2.10.4 | integer | read-only |
Yellow Toner status. 0:Toner Ready 1:Toner Low 2:No Toner Cartridge 3:Toner Empty |
| brieee1284id | 1.3.6.1.4.1.2435.2.3.9.1.1.7 | octet string | read-only |
IEEE1284 device ID |
| brttt1 | 1.3.6.1.4.1.2435.2.3.9.1.1.10 | integer | read-only |
unused |
| net_MFP | 1.3.6.1.4.1.2435.2.3.9.2 | |||
| fax_setup | 1.3.6.1.4.1.2435.2.3.9.2.1 | |||
| autodial | 1.3.6.1.4.1.2435.2.3.9.2.1.1 | |||
| onetouchDial | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1 | |||
| brOneTouchDialCount | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.1 | integer | read-only |
Maximum number of One touch dial. |
| brOneTouchDialTable | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2 | no-access |
This table represents One touch dial. |
|
| 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1 | no-access |
A row in the OneTouchDial table. Rows cannot be created or deleted. |
||
| brOneTouchDialIndex | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.1 | integer | read-only |
The One touch dial number. |
| brOneTouchDialData | 1.3.6.1.4.1.2435.2.3.9.2.1.1.1.2.1.2 | octet string | read-write |
The One Touch dial data. |
| speedDial | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2 | |||
| brSpeedDialCount | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.1 | integer | read-only |
Maximum number of Speed dial. |
| brSpeedDialTable | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2 | no-access |
This table represents Speed dial. |
|
| 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1 | no-access |
A row in the speedDial table. Rows cannot be created or deleted. |
||
| brSpeedDialIndex | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.1 | integer | read-only |
The Speed dial number. |
| brSpeedDialData | 1.3.6.1.4.1.2435.2.3.9.2.1.1.2.2.1.2 | octet string | read-write |
The Speed dial Data. |
| brDialDataAllClear | 1.3.6.1.4.1.2435.2.3.9.2.1.1.3 | integer | read-write |
Clear the all data of Onetouch dial and Speed dial. |
| fax_general | 1.3.6.1.4.1.2435.2.3.9.2.1.2 | |||
| brFaxReceiveMode | 1.3.6.1.4.1.2435.2.3.9.2.1.2.1 | integer | read-write |
Fax Receive Mode 0:Auto 1:Manual 2:FaxTel 3:TAD |
| brRingDelayCount | 1.3.6.1.4.1.2435.2.3.9.2.1.2.2 | integer | read-write |
Ring Delay Count |
| brOwnFaxNumber | 1.3.6.1.4.1.2435.2.3.9.2.1.2.3 | octet string | read-write |
Own Fax Number |
| scanner_setup | 1.3.6.1.4.1.2435.2.3.9.2.11 | |||
| scanToInfo | 1.3.6.1.4.1.2435.2.3.9.2.11.1 | |||
| brRegisterKeyInfo | 1.3.6.1.4.1.2435.2.3.9.2.11.1.1 | octet string | read-write |
Add the ScanTo information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client. |
| brUnRegisterKeyInfo | 1.3.6.1.4.1.2435.2.3.9.2.11.1.2 | octet string | read-write |
Remove the ScanTo information. If device receives GET request, device should reply fix value TRUE (writable), FALSE (not writable) to the client. |
| brNetSKeyReceiverAddress | 1.3.6.1.4.1.2435.2.3.9.2.11.1.5 | octet string | read-write |
IP Address or the name of the S-Key Receiver. |
| mfpCapability | 1.3.6.1.4.1.2435.2.3.9.2.101 | |||
| mcGeneral | 1.3.6.1.4.1.2435.2.3.9.2.101.1 | |||
| mcgRemoteSetup | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11 | |||
| brNetRemoteSetUpSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.1 | integer | read-only |
0 indicates the Net Remote Setup function is not supported. 1 indicates the Net Remote Setup function is implemented by the firmware |
| brNetRemoteSetUpEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.2 | integer | read-write |
0 indicates the Net Remote Setup is not enabled. 1 indicates that the Net Remote Setup is enabled. Writing a non-zero value will enable the Net Remote Setup if it is supported by the firmware. |
| brNetRemoteSetUpFileFormat | 1.3.6.1.4.1.2435.2.3.9.2.101.1.11.3 | integer | read-only |
It is a file format of the Net Remote Setup function. Enumeration: 'rms': 1, 'rmd': 2, 'rmsrmd': 3. |
| mcFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2 | |||
| mcfGeneral | 1.3.6.1.4.1.2435.2.3.9.2.101.2.1 | |||
| brFaxSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.1.1 | integer | read-only |
0 indicates the Fax function is not supported. 1 indicates the Fax function is implemented by the firmware |
| brIFaxSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.1.3 | integer | read-only |
0 indicates the IFax function is not supported. 1 indicates the IFax function is implemented by the firmware |
| mcfNetFaxShare | 1.3.6.1.4.1.2435.2.3.9.2.101.2.11 | |||
| brNetFaxShareSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.11.1 | integer | read-only |
0 indicates the Net Fax Share is not supported. 1 indicates the Net Fax Share is implemented by the firmware |
| brNetFaxShareEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.2.11.2 | integer | read-write |
0 indicates the Net Fax Share is not enabled. 1 indicates that the Net Fax Share is enabled. Writing a non-zero value will enable the Net Fax Share if it is supported by the firmware. |
| mcfNetPcFaxRx | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12 | |||
| brNetPcFaxRxSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.1 | integer | read-only |
0 indicates the Net PC Fax Rx is not supported. 1 indicates the Net PC Fax Rx is implemented by the firmware |
| brNetPcFaxRxEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.2 | integer | read-write |
0 indicates the Net PC Fax Rx is not enabled. 1 indicates that the Net PC Fax Rx is enabled. Writing a non-zero value will enable the Net PC Fax Rx if it is supported by the firmware. |
| brNetRegisterPcFaxInfo | 1.3.6.1.4.1.2435.2.3.9.2.101.2.12.3 | octet string | read-write |
Add the PcFax information. If device receives GET request, device should reply fix value TRUE(writable), FALSE(not writable) to the client. |
| mcfFaxInfomation | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101 | |||
| brPhoneNumberLastFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.1 | octet string | read-only |
Phone Number of Last Fax |
| brPagesSentLastFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.2 | counter | read-only |
Pages Sent in Last Fax |
| brTimestampLastFax | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.3 | dateandtime | read-only |
Timestamp of Last Fax |
| brFaxHeaderInfo | 1.3.6.1.4.1.2435.2.3.9.2.101.2.101.4 | displaystring | read-write |
Fax Header Infomation |
| mcScanner | 1.3.6.1.4.1.2435.2.3.9.2.101.3 | |||
| mcsNetScanner | 1.3.6.1.4.1.2435.2.3.9.2.101.3.11 | |||
| brNetScannerSupported | 1.3.6.1.4.1.2435.2.3.9.2.101.3.11.1 | integer | read-only |
0 indicates the Net Scanner is not supported. 1 indicates the Net Scanner is implemented by the firmware |
| brNetScannerEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.3.11.2 | integer | read-write |
0 indicates the Net Scanner is not enabled. 1 indicates that the Net Scanner is enabled. Writing a non-zero value will enable the Net Scanner if it is supported by the firmware. |
| mcsNetSKy | 1.3.6.1.4.1.2435.2.3.9.2.101.3.12 | |||
| brNetSKeySupported | 1.3.6.1.4.1.2435.2.3.9.2.101.3.12.1 | integer | read-only |
0 indicates the Net S-Key is not supported. 1 indicates the Net S-Key is implemented by the firmware |
| brNetSKeyEnable | 1.3.6.1.4.1.2435.2.3.9.2.101.3.12.2 | integer | read-write |
0 indicates the Net S-Key is not enabled. 1 indicates that the Net S-Key is enabled. Writing a non-zero value will enable the Net S-Key if it is supported by the firmware. |
| mfpgeneral_setup | 1.3.6.1.4.1.2435.2.3.9.2.111 | |||
| brServiceMode | 1.3.6.1.4.1.2435.2.3.9.2.111.1 | octet string | read-write |
Service Mode |
| brLockMode | 1.3.6.1.4.1.2435.2.3.9.2.111.2 | integer | read-write |
Lock Mode 0:normal 1:Customer 2:Lock |
| brActivityReportSetting | 1.3.6.1.4.1.2435.2.3.9.2.111.3 | integer | read-write |
Activity Report Setting 0:off 1:every 1hour 3:every 3hour 6:every 6hour 12:every 12hour 24:every 24hour 48:every 2day 96:every 4day 240:every Sunday 241:every Monday 242:every Tueseday 243:every Wednesday 244:every Thurseday 245:every Friday 246:every Saturday 255:interval 50FAX |
| netPML | 1.3.6.1.4.1.2435.2.3.9.4 | |||
| netPMLmgmt | 1.3.6.1.4.1.2435.2.3.9.4.2 | |||
| device | 1.3.6.1.4.1.2435.2.3.9.4.2.1 | |||
| destination_subsystem1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1 | |||
| sleep | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1 | |||
| brpowerstime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.1.1 | integer | read-write |
PowerSave Timeout value. 1 to 2147483647 (sec) |
| autoc | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2 | |||
| brautocont | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.2.7 | integer | read-write |
Auto Continue. 1:Off 2:On |
| simm | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4 | |||
| specification | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1 | |||
| simmkind0 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1 | |||
| brsimmtype0 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.4 | integer | read-only |
SIMM type on slot0. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| brsimmsize0 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.1.5 | integer | read-only |
SIMM size on slot0 |
| simmkind1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2 | |||
| brsimmtype1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.4 | integer | read-only |
SIMM type on slot1. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| brsimmsize1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.2.5 | integer | read-only |
SIMM size on slot1 |
| simmkind2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3 | |||
| brsimmtype2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.4 | integer | read-only |
SIMM type on slot2. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| brsimmsize2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.3.5 | integer | read-only |
SIMM size on slot2. |
| simmkind3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4 | |||
| brsimmtype3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.4 | integer | read-only |
SIMM type on slot3. 0: unconfirmed : 0 MB 1: empty 2: unconfirmed 3: No Supported : 0 MB 4: Read Only Memory 5: Volatility RAM : size MB 6: Un Volatility RAM : size MB 7: Flash Memory : size MB 8: Disk Drive : 0 MB 9: RAM/ROM : 0MB 10: Loading Paper Device 11: Out Paper Device 12: unconfirmed : 0 MB ato ha onaji |
| brsimmsize3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.1.4.5 | integer | read-only |
SIMM type on slot3. |
| bio1_explanation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3 | |||
| determined | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1 | |||
| brTBD1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.1.4.3.1.4 | integer | read-write |
unused |
| destination_subsystem2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2 | |||
| printerjob | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1 | |||
| jobend | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1 | |||
| brtimeout | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.1 | integer | read-write |
Job Timeout. 1 to 2147483647(sec) |
| brTBD2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.2.1.1.5 | integer | read-write |
unused |
| destination_subsystem3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3 | |||
| prt_setup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3 | |||
| prt_condition | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1 | |||
| brpersonality | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.1 | integer | read-write |
Printer Emulation setting. 1:PCL 2:HPGL 4:PS 5:AUTO 6:IBM 7:EPSON 8:HBP Enumeration: 'ps': 4, 'epson': 7, 'ibm': 6, 'auto': 5, 'hpgl': 2, 'pcl': 1, 'hbp': 8. |
| brorientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.2 | integer | read-write |
Default Paper Orientation. 1:portrait 2:landscape |
| brcopies | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.4 | integer | read-write |
Default Copy Pages. 1-999 pages |
| brTBD3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.6 | integer | read-write |
unused |
| brresolution | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.8 | integer | read-write |
Default Resolution. 300, 600 or 1200dpi |
| brpageprotect | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.10 | integer | read-write |
Page Protect mode 1:Off 3:Auto 4:Letter 5:Legal 6:A4 |
| brlines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.11 | integer | read-write |
lines per page. 5-128 |
| brpaper | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.13 | integer | read-write |
Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16K184x260 927:197x273 999:Other 1000:No Casette 1001:Auto Enumeration: 'a4Letter': 898, 'executive': 1, 'b6JIS': 924, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'prc16k184x260': 926, 'prc16k195x270': 925, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'prc16k197x273': 927, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'auto': 1001, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a5l': 923, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brpapertype | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.22 | integer | read-write |
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType |
| brpapertype2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.23 | integer | read-write |
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 2nd Tray PaperType |
| brpapertypeMP | 1.3.6.1.4.1.2435.2.3.9.4.2.1.3.3.1.26 | integer | read-write |
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType |
| destination_subsystem4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4 | |||
| print_engine | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1 | |||
| prt_density | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1 | |||
| brdensity | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.1.5 | integer | read-write |
Print Density. -15..15 |
| status_prt_eng | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.2 | |||
| tray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3 | |||
| manual | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1 | |||
| brmanualfeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.1.4 | integer | read-write |
Manualfeed mode. 1:Off 2:On |
| traysize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3 | |||
| mp | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1 | |||
| brmpsize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.1.1 | integer | read-write |
MP Tray paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| cassette | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2 | |||
| brtray1size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.2.1 | integer | read-write |
Tray1 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| cassette2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3 | |||
| brtray2size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.3.1 | integer | read-write |
Tray2 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| cassette3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4 | |||
| brtray3size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.4.1 | integer | read-write |
Tray3 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| cassette4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5 | |||
| brtray4size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.3.3.5.1 | integer | read-write |
Tray4 paper size -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| economy | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6 | |||
| brret | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.5 | integer | read-write |
HRC mode. 1:Off 2:Bright 3:Medium 4:Dark |
| breconomode | 1.3.6.1.4.1.2435.2.3.9.4.2.1.4.1.6.7 | integer | read-write |
Toner Save mode. 100:Off 0:On |
| brorg | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5 | |||
| printersetup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1 | |||
| general | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1 | |||
| brPrtGeneralEmulationTimeout | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.1 | integer | read-write |
Emulation Timeout. 1- 99(sec) |
| brPrtGeneralFeeder | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.2 | integer | read-write |
Default Feeder mode. 0:Auto 1:MP Tray 2:Tray1 3:Tray2 4:Tray3 5:Tray4 |
| brPrtGeneralPowerSave | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.3 | integer | read-write |
Power Save mode. 1:Off 2:On |
| brPrtGeneralBuzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.4 | integer | read-write |
Buzzer. 1:Off 2:On |
| brPrtGeneralColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.5 | integer | read-write |
Default Color mode 1:Monochrome 2:Color 3:Auto |
| brPrtGeneralDuplex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.6 | integer | read-write |
Duplex mode 1:Off(Simplex) 2:On(Duplex) |
| brPrtGeneralBinding | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.1.7 | integer | read-write |
Binding type 3:Short Edge 2:Long Edge |
| advanced | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2 | |||
| brPrtAdvancedPriority | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.1 | integer | read-write |
FX/XL Priority. 1:IBM XL 2:EPSON FX |
| brPrtAdvancedUseMPTrayFirst | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.2 | integer | read-write |
MP Tray First 1:No 2:Yes |
| brPrtAdvancedMPTrayFeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.3 | integer | read-write |
MP Tray feed mode. 1:Single 2:Continuous |
| brPrtAdvancedXOffset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.4 | integer | read-write |
X Offset. -500 to +500 pixel(600dpi) |
| brPrtAdvancedYOffset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.5 | integer | read-write |
Y Offset. -500 to +500 pixel(600dpi) |
| brPrtAdvancedImageCompression | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.6 | integer | read-write |
Image Compression mode. 0:Auto 1:Off 2:On |
| autoff | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7 | |||
| brPrtAdvancedAutoFormFeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.1 | integer | read-write |
Auto Formfeed mode. 1:Off 2:On |
| brPrtAdvancedAutoTimeout | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.7.2 | integer | read-write |
Auto Formfeed timeout. 1-99 (sec) |
| brPrtAdvancedFFSuppress | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.8 | integer | read-write |
FF Suppress mode. 1:Off 2:On |
| brPrtAdvancedTonerLowPrint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.9 | integer | read-write |
Print mode on Toner Low. 1:Stop 2:Continue |
| brPrtAdvancedPrintDensity | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.10 | integer | read-write |
Print Density. 1-15 |
| brPrtAdvancedInputBuffer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.11 | integer | read-write |
Input Buffer size. 1-15 blocks |
| brPrtAdvancedLanguage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.12 | integer | read-write |
1:ENGLISH 2:DANISH 3:DUTCH 4:FINNISH 5:FRENCH 6:GERMAN 7:ITALIAN 8:NORWEGIAN 9:PORTUGUESE 10:SWEDISH 11:SPANISH 12:TURKISH 13:POLISH 14:JAPANESE 15:RUSSIAN 16:CZECH 17:HUNGARIAN 18:ROMANIAN 19:BULGARIAN 20:SLOVAKIAN 21:CHINESE 22:BRAZIL Enumeration: 'chinese': 21, 'german': 6, 'japanese': 14, 'spanish': 11, 'polish': 13, 'swedish': 10, 'turkish': 12, 'romanian': 18, 'czech': 16, 'dutch': 3, 'danish': 2, 'bulgarian': 19, 'finish': 4, 'hungarian': 17, 'french': 5, 'norwegian': 8, 'slovakian': 20, 'russian': 15, 'brazil': 22, 'portuguse': 9, 'english': 1, 'italian': 7. |
| brSecurePrintRAMSizeMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.13 | integer | read-only |
The Max of Secure print RAM Size |
| brSecurePrintRAMSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.14 | integer | read-write |
Secure print RAM Size |
| brPrtAdvancedJamRecovery | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.15 | integer | read-write |
Jam recovery setting Enumeration: 'on': 2, 'off': 1. |
| brPrtAdvancedSleepIndication | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.16 | integer | read-write |
By enabling the Dimmed option, the status LED is dimmed while the printer is in sleep mode. Enumeration: 'off': 1, 'dimmed': 2. |
| brPrtAdvancedDestination | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.17 | integer | read-write |
Destination Enumeration: 'oct': 2, 'standardOutputTray': 1, 'octStack': 3. |
| brPrtAdvancedLowerLCD | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.18 | integer | read-write |
Lower LCD Enumeration: 'nonePage': 1, 'jobName': 3, 'counter': 2. |
| brPrtAdvancedAutoOnline | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.19 | integer | read-write |
Auto Online Enumeration: 'on': 2, 'off': 1. |
| brPrtAdvancedButtonRepeat | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.20 | integer | read-write |
Button Repeat. 0.1-2.0 |
| brPrtAdvancedMessageScroll | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.21 | integer | read-write |
Message Scroll. 1-10 |
| buzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22 | |||
| brPrtAdvancedErrorBuzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.1 | integer | read-write |
Error Buzzer Enumeration: 'off': 1, 'special': 3, 'normal': 2. |
| brPrtAdvancedPanelBuzzer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.2 | integer | read-write |
Panel Buzzer Enumeration: 'on': 2, 'off': 1. |
| brPrtAdvancedBuzzerVolume | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.22.3 | integer | read-write |
Buzzer Volume Enumeration: 'high': 1, 'low': 2. |
| brPrtAdvancedLCDDensity | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.23 | integer | read-write |
LCDDensity |
| smallPaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51 | |||
| brSmallPaperSizeMP | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.1 | integer | read-write |
MP Tray Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'noCasette': 1000, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brSmallPaperSize1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.2 | integer | read-write |
Tray1 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'noCasette': 1000, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brSmallPaperSize2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.3 | integer | read-write |
Tray2 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'noCasette': 1000, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brSmallPaperSize3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.4 | integer | read-write |
Tray3 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'noCasette': 1000, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brSmallPaperSize4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.51.5 | integer | read-write |
Tray4 Small Paper size. 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 1000:No Casette Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'noCasette': 1000, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| trayPriority | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52 | |||
| brPrtAdvancedTrayPriority | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.1 | integer | read-write |
The value of brTrayPriorityIndex corresponding to the default setting. |
| brTrayPriorityCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.2 | integer | read-only |
Maximum number of TrayPriority INDEX. |
| brTrayPriorityTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3 | no-access |
This table represents TrayPriority setting. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1 | no-access |
A row in the TrayPriority table. Rows cannot be created or deleted. |
||
| brTrayPriorityIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.1 | integer | read-only |
The number. |
| brTrayPriorityMember | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.52.3.1.2 | octet string | read-only |
The TrayPriority member data. Format: valulen(1byte), value(valulen byte) |
| carbonCopy | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53 | |||
| brCarbonCopyMode | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.1 | integer | read-write |
Carbon Copy mode setting. Enumeration: 'on': 2, 'off': 1, 'parallel': 4, 'auto': 3. |
| brCarbonCopies | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.2 | integer | read-write |
The copies setting of Carbon Copy function. |
| brCarbonCopyTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10 | no-access |
This table represents CarbonCopy setting. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1 | no-access |
A row in the CarbonCopy table. Rows cannot be created or deleted. |
||
| brCarbonCopyIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.1 | integer | read-only |
The number. |
| brCarbonCopyTray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.2 | integer | read-write |
Copy Tray setting. Enumeration: 'auto': 11, 'tray4': 4, 'mpTray': 10, 'tray1': 1, 'tray3': 3, 'tray2': 2. |
| brCarbonCopyMacro | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.3 | integer | read-write |
Carbon Copy Macro Setting Enumeration: 'on': 2, 'off': 1. |
| brCarbonCopyMacroID | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.53.10.1.4 | integer | read-write |
Carbon Copy Macro ID Setting |
| mediaFix | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54 | |||
| brMediaFixTray1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.1 | integer | read-write |
Media Fix setting for tray1. Enumeration: 'off': 1, 'envelopes': 8, 'recycled': 11, 'regular': 2, 'thin': 6, 'transparency': 5, 'thick': 3, 'envThin': 10, 'envThick': 9, 'thicker': 4, 'bond': 7. |
| brMediaFixTray2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.2 | integer | read-write |
Media Fix setting for tray2. Enumeration: 'off': 1, 'envelopes': 8, 'recycled': 11, 'regular': 2, 'thin': 6, 'transparency': 5, 'thick': 3, 'envThin': 10, 'envThick': 9, 'thicker': 4, 'bond': 7. |
| brMediaFixTray3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.3 | integer | read-write |
Media Fix setting for tray3. Enumeration: 'off': 1, 'envelopes': 8, 'recycled': 11, 'regular': 2, 'thin': 6, 'transparency': 5, 'thick': 3, 'envThin': 10, 'envThick': 9, 'thicker': 4, 'bond': 7. |
| brMediaFixTray4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.4 | integer | read-write |
Media Fix setting for tray4. Enumeration: 'off': 1, 'envelopes': 8, 'recycled': 11, 'regular': 2, 'thin': 6, 'transparency': 5, 'thick': 3, 'envThin': 10, 'envThick': 9, 'thicker': 4, 'bond': 7. |
| brMediaFixMP | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.54.10 | integer | read-write |
Media Fix setting for MPtray. Enumeration: 'off': 1, 'envelopes': 8, 'recycled': 11, 'regular': 2, 'thin': 6, 'transparency': 5, 'thick': 3, 'envThin': 10, 'envThick': 9, 'thicker': 4, 'bond': 7. |
| directprint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60 | |||
| brDirectPrintPaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.1 | integer | read-write |
Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West 923:A5L 924:B6JIS 925:16K195x270 926:16k184x260 927:16k197x273 Enumeration: 'b6jis': 924, 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'prc16k184x260': 926, 'prc16k195x270': 925, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'prc16k197x273': 927, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a5l': 923, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brDirectPrintMediaType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.2 | integer | read-write |
Default Media type. 0:Regular 1:Thick paper 2:Thicker paper 3:Transparency 4:Thin paper 5:Bond paper 6:ENVELOPES 7:ENV. THICK 8:ENV. THIN 9:RECYCLED 10:HAGAKI 11:LABEL 1nd (default) Tray PaperType |
| brDirectPrintMultipulPage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.3 | integer | read-write | |
| brDirectPrintOrientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.4 | integer | read-write | |
| brDirectPrintCollate | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.5 | integer | read-write | |
| brDirectPrintOutputColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.6 | integer | read-write | |
| brDirectPrintPrintQuality | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.7 | integer | read-write | |
| brDirectPrintPdfOption | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.8 | integer | read-write | |
| brDirectPrintSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.9 | integer | read-only | |
| brDirectPrintPdfThumbnailType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.60.10 | integer | read-write |
PDF Thumbnail Type 1:AlternativeImage 2:ReductionImage Enumeration: 'alternativeImage': 1, 'reductionImage': 2. |
| pictbridge | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61 | |||
| brPictBridgePaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.1 | integer | read-write |
Default Paper size. -1:No Casette 1:Executive 2:Letter 3:Legal 24:A6 25:A5 26:A4 27:A3(ISO) 45:B5(JIS) 46:B4(JIS) 80:Monarch 81:COM10 90:DL 91:C5 99:B6 100:B5 890:LEDGER 891:A3PLUS(13x19) 892:Letter Short Edge 893:A4 Short Edge 894:A4LONG 895:Executive Short Edge 896:B5(ISO) Short Edge 897:CUSTOM (ANY) 898:A4/Letter 899:B5/Executive 900:Envelopes 901:DL-L 902:HAGAKI 903:FOLIO 904:ORGANIZER J 905:ORGANIZER K 906:ORGANIZER L 907:ORGANIZER M 908:USER DEFINED 911:Detect Sensor 920:3x5(inches) 921:Envelopes Y4 922:Largest envelopes of the West Enumeration: 'a4Letter': 898, 'executive': 1, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'a4ShortEdge': 893, 'detectsensor': 911. |
| brPictBridgeOrientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.2 | integer | read-write | |
| brPictBridgeDateTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.3 | integer | read-write | |
| brPictBridgeFileName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.4 | integer | read-write | |
| brPictBridgePrintQuality | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.5 | integer | read-write | |
| brPictBridgePrintSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.61.6 | integer | read-only | |
| colorcorrection | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62 | |||
| brColorCalibration | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.1 | integer | read-write | |
| brColorCalibrationReset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.2 | integer | read-write | |
| brAutoRegistRegistrate | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.3 | integer | read-write | |
| brAutoRegistSetInterval | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.4 | integer | read-write | |
| brRegistrationPrintChart | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.5 | integer | read-write | |
| brRegistrationXMagentaLeft | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.6 | integer | read-write | |
| brRegistrationXMagentaRight | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.7 | integer | read-write | |
| brRegistrationXCyanLeft | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.8 | integer | read-write | |
| brRegistrationXCyanRight | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.9 | integer | read-write | |
| brRegistrationXYellowLeft | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.10 | integer | read-write | |
| brRegistrationXYellowRight | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.11 | integer | read-write | |
| brRegistrationYMagenta | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.12 | integer | read-write | |
| brRegistrationYCyan | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.13 | integer | read-write | |
| brRegistrationYYellow | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.62.14 | integer | read-write | |
| funclock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63 | |||
| brFuncLockSettingInit | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.1 | integer | read-write |
Init Function Lock Setting. |
| brFuncLockAdminPassword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.2 | displaystring | read-write |
Get or Set the administrator password of Function Lock. |
| brFuncLock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.3 | integer | read-write |
Get or Set the status of Function Lock. |
| brFuncLockPublicFuncCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.4 | integer | read-only |
Return the number of functions to be locked on the public mode. |
| brFuncLockPublicTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5 | no-access | ||
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1 | no-access | |||
| brFuncLockPublicFuncIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.1 | integer | read-only |
Return the index value of functions to be locked on the public mode. |
| brFuncLockPublicFuncMember | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.2 | integer | read-only |
Return the member of functions to be locked on the public mode. Enumeration: 'scan': 5, 'copybr': 2, 'faxrx': 4, 'print': 6, 'pcc': 7, 'faxtx': 3, 'copycolor': 1. |
| brFuncLockPublicFuncSupported | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.3 | integer | read-only |
Return the status of availableness of functions to be locked on the public mode. |
| brFuncLockPublicFuncEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.5.1.4 | integer | read-write |
Get of Set the status of functions on the public mode. |
| brFuncLockUserCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.6 | integer | read-only |
Return the number of users to be locked on function lock. |
| brFuncLockUserTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7 | no-access | ||
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1 | no-access | |||
| brFuncLockUserIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.1 | integer | read-only |
Return the index value of users to be locked on function lock. |
| brFuncLockUserName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.2 | displaystring | read-write |
Get or Set the user name of function lock. |
| brFuncLockUserPassword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.7.1.3 | displaystring | read-write |
Get or Set the user password of function lock. |
| brFuncLockUserFuncCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.8 | integer | read-only |
Return the number of users to be locked on the function lock. |
| brFuncLockUserFuncTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9 | no-access | ||
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1 | no-access | |||
| brFuncLockUserFuncIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.1 | integer | read-only |
Return the index value of users to be locked on user mode. |
| brFuncLockUserFuncMember | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.2 | integer | read-only |
Return the function numbers to be locked on user mode. Enumeration: 'scan': 5, 'copybr': 2, 'faxrx': 4, 'print': 6, 'pcc': 7, 'faxtx': 3, 'copycolor': 1. |
| brFuncLockUserFuncSupported | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.3 | integer | read-only |
Return the availableness of function to be locked on user mode. |
| brFuncLockUserFuncEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.9.1.4 | integer | read-write |
Get or Set the lock status on the user mode. |
| brFuncLockSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.10 | integer | read-write |
Write the all information of function lock. |
| brFuncLockUserPrintPageCounterReset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.20 | integer | read-write |
Reset all user's counter of Color/Mono print page. |
| brFuncLockPublicPrintLimitEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.21 | integer | read-write |
This MIB represents Enable/Disable of print limit setting for public user. |
| brFuncLockPublicPrintPageMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.22 | integer | read-write |
The Maximum of print limited for public user. |
| brFuncLockPublicPrintPageCountMono | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.23 | integer | read-only |
The counter of monochrome print page. |
| brFuncLockPublicPrintPageCountColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.24 | integer | read-only |
The counter of color print page for public user. |
| brFuncLockUserPrintPageTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25 | no-access | ||
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1 | no-access | |||
| brFuncLockUserPrintPageIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.1 | integer | read-only | |
| brFuncLockUserPrintPageLimitEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.2 | integer | read-write |
The Maximum of Print Page setting for user. |
| brFuncLockUserPrintPageCountMono | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.3 | integer | read-only |
The Counter of Monochrome Print Page for user. |
| brFuncLockUserPrintPageCountColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.4 | integer | read-only |
The counter of color print page for user. |
| brFuncLockUserPrintPageMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.5 | integer | read-write |
The Maximum of print limited for user. |
| brFuncLockUserPrintPageCountMonoLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.6 | integer | read-only | |
| brFuncLockUserPrintPageCountColorLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.25.1.7 | integer | read-only | |
| brFuncLockPcLoginNameAuthEnable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.26 | integer | read-write |
This MIB represents Enable/Disable of PC Login Authentication setting. |
| brFuncLockPcLoginNameAuthCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.27 | integer | read-only |
The number of PC Login Name. |
| brFuncLockPcLoginNameTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28 | no-access | ||
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1 | no-access | |||
| brFuncLockPcLoginNameAuthIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.1 | integer | read-only | |
| brFuncLockPcLoginName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.2 | octet string | read-write |
The PC Login Name. |
| brFuncLockPcLoginNameAuthID | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.28.1.3 | integer | read-write |
PC Login ID for PC Login name. |
| brFuncLockPublicPrintPageCountMonoLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.29 | integer | read-only | |
| brFuncLockPublicPrintPageCountColorLast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.30 | integer | read-only | |
| autocountreset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31 | |||
| brFuncLockAutoCountResetFrequency | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.1 | integer | read-write | |
| brFuncLockAutoCountResetTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.2 | octet string | read-write | |
| brFuncLockAutoCountResetWeek | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.3 | integer | read-write | |
| brFuncLockAutoCountResetDate | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.2.63.31.4 | integer | read-write | |
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3 | ||||
| brPrtMailbox | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.1 | integer | read-write |
Mailbox Installed of not |
| brPrtMailboxProtectTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2 | no-access |
unused |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1 | no-access |
unused |
||
| brPrtMailboxProtectIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.1 | integer | read-write |
unused |
| brPrtMailboxProtect | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.2.1.2 | integer | read-write |
unused |
| brPrtAvoidMailboxFullTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3 | no-access |
unused |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1 | no-access |
unused |
||
| brPrtAvoidMailboxFullIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.1 | integer | read-write |
unused |
| brPrtAvoidMailboxFull | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.3.1.2 | integer | read-write |
unused |
| brPrtMailboxOutbin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.4 | integer | read-write |
Outbin |
| brPrtMailboxProtectGroup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.5 | integer | read-write |
Mailbox Protect |
| brPrtAvoidMailboxFullGroup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.3.6 | integer | read-write |
Avoid Mailbox Full |
| finisher | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4 | |||
| brPrtFinisher | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.4.1 | integer | read-only |
Finisher type 0:no finisher 1:FS5050 2:FS5100 |
| catch_tray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5 | |||
| brPrtCatchTray | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.1.5.1 | integer | read-only |
catch tray Installed or not |
| pagesetup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2 | |||
| pcl | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1 | |||
| margin_p | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1 | |||
| brPagePCLLeftMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.1 | integer | read-write |
PCL LeftMargin 1270N :0-145 2400Ce :0-176 |
| brPagePCLRightMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.2 | integer | read-write |
PCL RightMargin 1270N :10-155 2400Ce :10-186 |
| brPagePCLTopMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.3 | integer | read-write |
PCL TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| brPagePCLBottomMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.4 | integer | read-write |
PCL BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| brPagePCLLines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.1.5 | integer | read-write |
PCL Form Line 5-128 |
| auto_p | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2 | |||
| brPagePCLAutoLF | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.1 | integer | read-write |
PCL AutoLF 1:Off 2:On |
| brPagePCLAutoCR | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.2 | integer | read-write |
PCL AutoCR 1:Off 2:On |
| brPagePCLAutoWrap | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.3 | integer | read-write |
PCL AutoWrap 1:Off 2:On |
| brPagePCLAutoSkip | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.1.2.4 | integer | read-write |
PCL AutoSkip 1:Off 2:On |
| ps | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2 | |||
| brPagePSPrintPSError | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.1 | integer | read-write |
PrintPSError 1:Off 2:On Enumeration: 'on': 2, 'off': 1. |
| brPagePSKeepPCLFonts | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.2 | integer | read-write |
KeepPCLFonts 1:Off 2:On Enumeration: 'on': 2, 'off': 1. |
| brPagePSCAPTsetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.2.3 | integer | read-write |
PS CAPT setting 1:Off 2:On Enumeration: 'on': 2, 'off': 1. |
| gl | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3 | |||
| pen1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1 | |||
| brPageGLPen1Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.1 | integer | read-write |
GL PenSize 1-16 |
| brPageGLPen1GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.1.2 | integer | read-write |
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2 | |||
| brPageGLPen2Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.1 | integer | read-write |
GL PenSize 1-16 |
| brPageGLPen2GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.2.2 | integer | read-write |
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3 | |||
| brPageGLPen3Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.1 | integer | read-write |
GL PenSize 1-16 |
| brPageGLPen3GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.3.2 | integer | read-write |
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4 | |||
| brPageGLPen4Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.1 | integer | read-write |
GL PenSize 1-16 |
| brPageGLPen4GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.4.2 | integer | read-write |
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| pen5 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5 | |||
| brPageGLPen5Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.1 | integer | read-write |
GL PenSize 1-16 |
| brPageGLPen5GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.5.2 | integer | read-write | |
| pen6 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6 | |||
| brPageGLPen6Size | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.1 | integer | read-write |
GL PenSize 1-16 |
| brPageGLPen6GrayLevel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.3.6.2 | integer | read-write |
GLPen GrayLevel 0:15% 1:30% 2:45% 3:75% 4:90% 5:100% |
| epson | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4 | |||
| margin_e | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1 | |||
| brPageEPSONLeftMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.1 | integer | read-write |
EPSON LeftMargin 1270N :0-145 2400Ce :0-176 |
| brPageEPSONRightMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.2 | integer | read-write |
EPSON RightMargin 1270N :10-155 2400Ce :10-186 |
| brPageEPSONTopMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.3 | integer | read-write |
EPSON TopMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| brPageEPSONBottomMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.4 | integer | read-write |
EPSON BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| brPageEPSONLines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.1.5 | integer | read-write |
EPSON Form Line 5-128 |
| auto_e | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2 | |||
| brPageEPSONAutoLF | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.1 | integer | read-write |
EPSON AutoLF 1:Off 2:On |
| brPageEPSONAutoMask | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.4.2.5 | integer | read-write |
EPSON AutoMask 1:Off 2:On |
| ibm | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5 | |||
| margin_i | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1 | |||
| brPageIBMLeftMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.1 | integer | read-write |
IBM LeftMargin 1270N :0-145 2400Ce :0-176 |
| brPageIBMRightMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.2 | integer | read-write |
IBM LeftMargin 1270N :10-155 2400Ce :10-186 |
| brPageIBMTopMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.3 | integer | read-write |
IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| brPageIBMBottomMargin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.4 | integer | read-write |
IBM BottomMargin 0:0 33:0.33 50:0.5 100:1.0 150:1.5 200:2.0 |
| brPageIBMLines | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.1.5 | integer | read-write |
IBM Form Line 5-128 |
| auto_i | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2 | |||
| brPageIBMAutoLF | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.1 | integer | read-write |
IBM AutoLF 1:Off 2:On |
| brPageIBMAutoCR | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.2 | integer | read-write |
IBM AutoCR 1:Off 2:On |
| brPageIBMAutoMask | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.2.5.2.5 | integer | read-write |
IBM AutoMask 1:Off 2:On |
| fontsetup | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3 | |||
| brFontName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.1 | integer | read-write |
unused |
| brFontPointSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.2 | integer | read-write |
unused(400-99975) |
| brFontPitch | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.3 | integer | read-write |
unused(44-9999) |
| brFontSymbolSet | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.3.4 | integer | read-write |
unused |
| controlpanel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4 | |||
| reset | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1 | |||
| brPanelResetUser | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.1 | integer | read-write |
User Reset |
| brPanelResetFactory | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.1.2 | integer | read-write |
Factory Reset |
| test | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2 | |||
| brPanelTestConfiguration | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.1 | integer | read-write |
Print Config page |
| brPanelTestFontList | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.2 | integer | read-write |
Print Fonts list |
| brPanelTestTestPage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.3 | integer | read-write |
Print Test page |
| brPanelTestDemoPage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.2.4 | integer | read-write |
Print Demo page 0:Enable Print Demo page 1:Disable Print Demo page |
| panellock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3 | |||
| brPanelLockPasswd | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.1 | integer | read-write |
unused |
| brPanelLock | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.2 | integer | read-only |
The state of panel lock Enumeration: 'on': 2, 'off': 1. |
| brPanelLockOn | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.3 | octet string | read-write |
Panel Lock by setting a password. |
| brPanelLockOff | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.3.4 | octet string | read-write |
Panel Lock is canceled by inputting a password.. |
| key | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4 | |||
| brPanelKeyOnline | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.1 | integer | read-write |
Press Online Key |
| brPanelKeyFormFeed | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.2 | integer | read-write |
Press FormFeed Key |
| brPanelKeyContinue | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.3 | integer | read-write |
Press Countinue Key |
| brPanelKeyMode | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.4 | integer | read-write |
unused |
| brPanelKeyGo | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.5 | integer | read-write |
Press Go Key |
| brPanelKeyJobCancel | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.6 | integer | read-write |
Press JobCancel Key |
| brPanelKeyReprint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.7 | integer | read-write |
Press Reprint Key |
| brPanelKeySecure | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.4.8 | integer | read-write |
Press SecurePrint Key |
| panelinfo | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5 | |||
| brLCDMode1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.1 | integer | read-only |
LCD Display Mode. 1:fix 2:blink 3:scroll Enumeration: 'fix': 1, 'scroll': 3, 'blinkScroll': 4, 'blink': 2. |
| brLCDString1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.2 | octet string | read-only |
LCD Display String of first line. |
| brLCDMode2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.3 | integer | read-only |
LCD Display Mode. 1:fix 2:blink 3:scroll Enumeration: 'fix': 1, 'scroll': 3, 'blink': 2. |
| brLCDString2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.4 | octet string | read-only |
LCD Display String of second line. |
| brLCDString16fix | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.5 | displaystring | read-only |
LCD Display String of 16fix. |
| brBackLightColor | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.6 | integer | read-only |
LCD Display Mode. 0:Off 1:Green 2:Orange 3:Red Enumeration: 'orange': 2, 'green': 1, 'notsupport': 255, 'red': 3. |
| brLCDMode3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.7 | integer | read-only |
LCD Display Mode. 1:fix 2:blink 3:scroll Enumeration: 'fix': 1, 'scroll': 3, 'blinkScroll': 4, 'blink': 2. |
| brLCDString3 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.8 | octet string | read-only |
LCD Display String of first line. |
| brLCDMode4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.9 | integer | read-only |
LCD Display Mode. 1:fix 2:blink 3:scroll Enumeration: 'fix': 1, 'scroll': 3, 'blinkScroll': 4, 'blink': 2. |
| brLCDString4 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.10 | octet string | read-only |
LCD Display String of first line. |
| brLCDMode5 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.11 | integer | read-only |
LCD Display Mode. 1:fix 2:blink 3:scroll Enumeration: 'fix': 1, 'scroll': 3, 'blinkScroll': 4, 'blink': 2. |
| brLCDString5 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.12 | octet string | read-only |
LCD Display String of first line. |
| brLCDContrast | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.4.5.13 | integer | read-write |
This value adjusts the contrast of the LCD Display. |
| printerinfomation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5 | |||
| brInfoSerialNumber | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.1 | octet string | read-only |
Serial number of printer |
| brInfoType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.2 | integer | read-only |
unused |
| version | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3 | |||
| brInfoUpperMIBVer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.1 | integer | read-only |
unused (upper digit of the MIB version) |
| brInfoLowerMIBVer | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.3.2 | integer | read-only |
unused (lower digit of the MIB version) |
| brInfoStatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.4 | integer | read-only |
Status message ID |
| brInfoNetVerUpStatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.5 | integer | read-only |
unused |
| brInfoPrinterUStatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.6 | integer | read-only |
Status ID |
| brInfoPConSupported | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.7 | integer | read-only |
BRPCon support 0:not supported 1:supported |
| brInfoMaintenance | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.8 | octet string | read-only |
Maintenance info. |
| brInfoModelNumber | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.9 | integer | read-only |
Printer Model ID 4:2400Ce 5:3400CN 6:3260 8:2460 9:2600cn 11:3450cn 13:am 14:zlhe 15:zl2 16:jigen 17:aml 18:l4c 19: ALL 20: AL LED 21: AL LCD 22: HL-4040CN 23: ALL China 24: HL-4050CDN/HL-4070CDW 25: ALL2 101:ZL MFC FB type 102:ZL MFC Normal type 103:BH MFC Nornal type 104:BH MFC FB type 105:ZL MFC with HS 106:BH MFC with HS 107: ZL2FB 108: BHL2MFC 109: BHL2FB 110: ZL2MFC 111: Mini2 112: Mini2 ADF 113: BH3FB 114: BH3MFC 115: ALL-MFC 116: ALL-FB 117: SLow4C 118: mini2eColorLCD, 119: mini2eColorLCD ADF 120: AL-FB 121: DCP540 122: DCP750 123: MFC440 124: MFC665 125: MFC850 126: MFC860 127: MFC5460 128: MFC5860 129: DCP6150 130: DCP6260 131: MFC6460 132: MFC6860 133: DCP770 134: MFC480 135: AC-FB CIS 136: AC-FB CCD 137: MFC7440 138: MFC7840 139: MFC5490 140: MFC5890 141: MFC6490 142: DCP6690 143: MFC6890 144: DCP585 145: MFC490 146: MFC790 147: MFC990 148: MFC930 Enumeration: 'zl': 102, 'dcp540': 121, 'all': 19, 'hl3400CN': 5, 'alfb': 120, 'alLcdModel': 21, 'am': 13, 'mini2eColorLCDADF': 119, 'mini2eColorLCD': 118, 'mfc665': 124, 'mfc6890': 143, 'hl4040': 22, 'dcp6260': 130, 'mfc490': 145, 'acfbCCD': 136, 'mfc5490': 139, 'bh3fb': 113, 'allmfc': 115, 'jigen': 16, 'mfc6490': 141, 'zl2fb': 107, 'dcp6860': 132, 'slow4c': 117, 'bhl2mfc': 108, 'zlhe': 14, 'dcp6460': 131, 'l4c': 18, 'hl2460': 8, 'dcp770': 133, 'hl2400ce': 4, 'zl2': 15, 'zlhs': 105, 'mfc5860': 128, 'mfc990': 147, 'bhfb': 104, 'hl2600cn': 9, 'aml': 17, 'zlfb': 101, 'mfc850': 125, 'allfb': 116, 'dcp750': 122, 'bh': 103, 'mfc790': 146, 'mfc440': 123, 'alLedModel': 20, 'hl3450cn': 11, 'hl4050hl4070': 24, 'mfc5890': 140, 'bh3mfc': 114, 'mfc480': 134, 'dcp6150': 129, 'mini2adf': 112, 'mfc7840': 138, 'dcp6690': 142, 'mfc7440': 137, 'acfbCIS': 135, 'mfc930': 148, 'dcp585': 144, 'mfc860': 126, 'mfc5460': 127, 'allchn': 23, 'bhhs': 106, 'all2': 25, 'bhl2fb': 109, 'hl3260': 6, 'mini2': 111, 'zl2mfc': 110. |
| brInfoCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.10 | octet string | read-only |
Page counter |
| brInfoNextCare | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.11 | octet string | read-only |
Remaining life info. |
| brInfoHDDSlot1 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.12 | integer | read-only |
Card Slot1 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format) |
| brInfoHDDSlot2 | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.13 | integer | read-only |
Card Slot2 status 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format) |
| brInfoHDDInternal | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.14 | integer | read-only |
Internal HDD info. 1:complete 2:IO error 3:memory error 4:not found 5:no device 6:no file(format) |
| brInfoHDDSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.15 | octet string | read-only |
unused |
| brInfoSolutionsCenterURL | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.16 | displaystring | read-only |
Brother Solutions Center's URL |
| brInfoDeviceRomVersion | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.17 | displaystring | read-only |
The device rom version |
| brInfoCoverage | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.18 | octet string | read-only |
Coverage info. |
| brInfoEstimatedPagesRemaining | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.19 | counter | read-only |
Estimated pages remaining info. |
| brInfoReplaceCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.20 | octet string | read-only |
Replace count info. |
| brInfoJamCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.21 | octet string | read-only |
Jam count info. |
| brInfoJamCountClear | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.22 | integer | read-write |
Jam count Clear. |
| brInfoReplaceTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.23 | octet string | read-only |
Replace count time info. |
| brInfoDeviceSubRomVersion | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.24 | octet string | read-only |
The PCL/PS ROM Version. |
| brInfoAlertVersion | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.25 | integer | read-only |
It indicates the version that prtAlertLocation is implemented correctly. |
| brInfoBlackPrint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.26 | integer | read-only |
It indicates black only print enable/disable info 0: disable 1: enable |
| errorHistory | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51 | |||
| brErrorHistoryCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.1 | integer | read-only |
Maximum number of Error History. |
| brErrorHistoryTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2 | no-access |
This table represents Error History. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1 | no-access |
A row in the ErrorHistory table. Rows cannot be created or deleted. |
||
| brErrorHistoryIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.1 | integer | read-only |
A unique value for the error history. |
| brErrorHistoryDescription | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.2.1.2 | octet string | read-only |
The ErrorHistory Description. |
| brErrorHistoryAllClear | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.3 | integer | read-write |
All clear Error History. |
| brCommunicationErrorHistoryCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.11 | integer | read-only |
Maximum number of Communication Error History. |
| brCommunicationErrorHistoryTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12 | no-access |
This table represents Communication Error History. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1 | no-access |
A row in the Communication ErrorHistory table. Rows cannot be created or deleted. |
||
| brCommunicationErrorHistoryIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.1 | integer | read-only |
A unique value for the Communication error history. |
| brCommunicationErrorHistoryDescription | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.51.12.1.2 | octet string | read-only |
The Communication Error History Description. |
| printPages | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52 | |||
| brPrintPagesTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1 | no-access |
This table represents Print Pages. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1 | no-access |
A row in the PrintPages table. Rows cannot be created or deleted. |
||
| brPrintPagesIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.1 | integer | read-only |
A unique value for the print pages. |
| brPrintPagesPaperSize | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.2 | integer | read-only |
The paper size of print pages. Enumeration: 'a4Letter': 898, 'executive': 1, 'b6JIS': 924, 'b5': 100, 'b6': 99, 'largestEnvelopesTheWest': 922, 'a4LONG': 894, 'dll': 901, 'b4JIS': 46, 'folio': 903, 'b5Executive': 899, 'ledger': 890, 'legal': 3, 'custom': 897, 'executiveShortEdge': 895, 'letterShortEdge': 892, 'organaizerK': 905, 'monarch': 80, 'organaizerJ': 904, 'organaizerM': 907, 'organaizerL': 906, 'dl': 90, 'envelopes': 900, 'userdefined': 908, 'b5ISOShortEdge': 896, 'envelopesY4': 921, 'a5': 25, 'a4': 26, 'letter': 2, 'a6': 24, 'c5': 91, 'inches3x5': 920, 'a3ISO': 27, 'hagaki': 902, 'b5JIS': 45, 'a3PLUS': 891, 'com10': 81, 'b6A5A6': 910, 'otherPage': 999, 'a4ShortEdge': 893, 'legalA4Long': 909, 'detectsensor': 911. |
| brPrintPages | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.1.1.3 | counter | read-only |
The count of Print pages. |
| brPrintPagesMediaPlaceTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11 | no-access |
This table represents Print Pages of Media Place. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1 | no-access |
A row in the PrintPages Media Place table. Rows cannot be created or deleted. |
||
| brPrintPagesMediaPlaceIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.1 | integer | read-only |
A unique value for the print pages of media place. |
| brPrintPagesMediaPlaceType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.2 | integer | read-only |
The place of media. Enumeration: 'back': 2, 'face': 1. |
| brPrintPagesMediaPlaceCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.11.1.3 | counter | read-only |
The count of Print pages of media place. |
| brPrintPagesFuncTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21 | no-access |
This table represents Print Pages of each function. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1 | no-access |
A row in the PrintPages Func table. Rows cannot be created or deleted. |
||
| brPrintPagesFuncIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.1 | integer | read-only |
A unique value for the print pages of each function. |
| brPrintPagesFuncType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.2 | integer | read-only |
The kind of function. Enumeration: 'pcPrintmono': 7, 'copymono': 9, 'faxmono': 8, 'copytotal': 3, 'pcPrintcolor': 5, 'pcPrinttotal': 1, 'faxtotal': 2, 'copycolor': 4, 'faxcolor': 6. |
| brPrintPagesFuncCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.21.1.3 | counter | read-only |
The count of Print pages of the function. |
| brPrintPagesPaperTypeTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31 | no-access |
This table represents Print Pages of Paper Type. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1 | no-access |
A row in the PrintPages Paper Type table. Rows cannot be created or deleted. |
||
| brPrintPagesPaperTypeIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.1 | integer | read-only |
A unique value for the print pages of paper type. |
| brPrintPagesPaperTypeType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.2 | integer | read-only |
The type of paper. Enumeration: 'thickthickerbond': 13, 'envelopesenvthickenvthin': 14, 'transparency': 3, 'regularthinrecycled': 12. |
| brPrintPagesPaperTypeCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.52.31.1.3 | counter | read-only |
The count of Print pages of paper type. |
| capability | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53 | |||
| copies | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1 | |||
| brCapabilityCopiesMax | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.1 | integer | read-only |
The maximum value of copies |
| brCapabilityCopiesMin | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.1.2 | integer | read-only |
The minimum value of copies |
| orientation | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2 | |||
| brCapabilityOrientationCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.1 | integer | read-only |
The number of support of orientation |
| brCapabilityOrientationTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2 | no-access |
This table represents capability of orientation. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1 | no-access |
A row in the capability of orientation table. Rows cannot be created or deleted. |
||
| brCapabilityOrientationIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.1 | integer | read-only |
A unique value for the capability of orientation. |
| brCapabilityOrientationName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.2.2.1.2 | displaystring | read-only |
The name of orientation currently supported. |
| paper | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3 | |||
| brCapabilityPaperCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.1 | integer | read-only |
The number of kinds of the paper currently supported |
| brCapabilityPaperTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2 | no-access |
This table represents capability of paper. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1 | no-access |
A row in the capability of paper table. Rows cannot be created or deleted. |
||
| brCapabilityPaperIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.1 | integer | read-only |
A unique value for the capability of paper. |
| brCapabilityPaperName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.3.2.1.2 | displaystring | read-only |
The name of paper currently supported. |
| mediatype | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4 | |||
| brCapabilityMediatypeCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.1 | integer | read-only |
The number of kinds of the mediatype currently supported |
| brCapabilityMediatypeTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2 | no-access |
This table represents capability of mediatype. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1 | no-access |
A row in the capability of mediatype table. Rows cannot be created or deleted. |
||
| brCapabilityMediatypeIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.1 | integer | read-only |
A unique value for the capability of mediatype. |
| brCapabilityMediatypeName | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.4.2.1.2 | displaystring | read-only |
The name of mediatype currently supported. |
| resolution | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5 | |||
| brCapabilityResolutionCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.1 | integer | read-only |
The number of kinds of the resolution currently supported |
| brCapabilityResolutionTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2 | no-access |
This table represents capability of resolution. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1 | no-access |
A row in the capability of resolution table. Rows cannot be created or deleted. |
||
| brCapabilityResolutionIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.1 | integer | read-only |
A unique value for the capability of resolution. |
| brCapabilityResolution | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.53.5.2.1.2 | integer | read-only |
The value of resolution currently supported. |
| countinfo | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54 | |||
| pfkit | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1 | |||
| brPfKitIndexCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.1 | integer | read-only |
Maximum number of PF kit. |
| brPfKitTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2 | no-access |
This table represents PF kit. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1 | no-access |
A row in the PfKit table. Rows cannot be created or deleted. |
||
| brPfKitIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.1 | integer | read-only |
A unique value for the PF kit. |
| brPfKitType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.2 | integer | read-only |
The PF kit ID. Enumeration: 'pfkit1': 1, 'pfkit2': 2, 'pfkit3': 3, 'pfkit4': 4, 'pfkitmp': 10, 'pfkitdx': 20. |
| brPfKitCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.1.2.1.3 | counter | read-only |
Counter of the PF kit. |
| scancount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2 | |||
| brScanCountIndexCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.1 | integer | read-only |
Maximum number of Scan place. |
| brScanCountTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2 | no-access |
This table represents scan count. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1 | no-access |
A row in the ScanCount table. Rows cannot be created or deleted. |
||
| brScanCountIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.1 | integer | read-only |
A unique value for the scan count place. |
| brScanCountType | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.2 | integer | read-only |
The scan place ID. Enumeration: 'adf': 1, 'fb': 2, 'adfdx': 3. |
| brScanCountCounter | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.54.2.2.1.3 | counter | read-only |
Counter of the scan. |
| firmwareupdatekeyword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55 | |||
| brFirmwareUpdateKeywordCount | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.1 | integer | read-only |
The number of Firmware for update the device. |
| brFirmwareUpdateKeywordTable | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2 | no-access |
The table represents the number of Firmware for Update. |
|
| 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1 | no-access |
A row in the FirmwareUpdateKeyword table. Rows cannot be created or deleted. |
||
| brFirmwareUpdateKeywordIndex | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.1 | integer | read-only | |
| brFirmwareUpdateKeyword | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.5.55.2.1.2 | octet string | read-only |
The keyword for firemware update the device. |
| printerstatus | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6 | |||
| brStatusSleep | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.6.1 | integer | read-only |
Sleeping status 0:ready 1:sleep |
| secret | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7 | |||
| brSecretMPRetry | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.1 | integer | read-write |
unused |
| brSecretReprint | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.2 | integer | read-write |
Secret Reprint mode 0:Off 111:On 222:Job |
| brFontSetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.3 | integer | read-only |
Font Setting 0:Brother Font 1:Agfa Font |
| brFontSwitchOn | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.4 | integer | read-write |
Switch of Agfa Font On |
| brFontSwitchOff | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.7.5 | integer | read-write |
Switch of Agfa Font Off |
| adminsetting | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8 | |||
| clockfunction | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1 | |||
| brClockFuncTimeStyle | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.1 | integer | read-write |
Time format 0:YMD 1:MDY 2:DMY |
| brClockFuncSummerTime | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.2 | integer | read-write |
Summer time 1:Off 2:On |
| brClockFuncTimeZone | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.3 | integer | read-write |
TimeZone |
| brClockFuncZoneSet | 1.3.6.1.4.1.2435.2.3.9.4.2.1.5.8.1.4 | integer | read-write |
TimeZone enable 1:Off 2:On |
| interface | 1.3.6.1.4.1.2435.2.4 | |||
| npCard | 1.3.6.1.4.1.2435.2.4.3 | |||
| npSys | 1.3.6.1.4.1.2435.2.4.3.1 | |||
| npConfig | 1.3.6.1.4.1.2435.2.4.3.1.1 | |||
| brBasicSettingConfigured | 1.3.6.1.4.1.2435.2.4.3.1.1.1 | integer | read-only |
This value indicates that the basic setting is configured or not. The condition entry of this value is model dependent. Enumeration: 'configured': 2, 'unconfigured': 1. |
| adminCapa | 1.3.6.1.4.1.2435.2.4.3.1.99 | |||
| brAdminCapability | 1.3.6.1.4.1.2435.2.4.3.1.99.1 | octet string | read-only |
AdminCapability |
| userSetting | 1.3.6.1.4.1.2435.2.4.3.1.100 | |||
| brUserPasswordVerify | 1.3.6.1.4.1.2435.2.4.3.1.100.1 | displaystring | read-write |
Submit the print server's user password for verification. An error will be returned if the password is incorrect. |
| brUserPassword | 1.3.6.1.4.1.2435.2.4.3.1.100.2 | displaystring | read-write |
Set the print server's user password value. |
| verify | 1.3.6.1.4.1.2435.2.4.3.1.101 | |||
| brpsVerifyPhysAddress | 1.3.6.1.4.1.2435.2.4.3.1.101.1 | octet string | read-write |
For verify physical address. |
| npTcp | 1.3.6.1.4.1.2435.2.4.3.6 | |||
| lpd | 1.3.6.1.4.1.2435.2.4.3.6.99 | |||
| banner | 1.3.6.1.4.1.2435.2.4.3.6.99.1 | |||
| brLPDBannerPage | 1.3.6.1.4.1.2435.2.4.3.6.99.1.1 | integer | read-write |
LPR banner page 0: disabled. 1: enabled. 2: force to print. |
| npCtl | 1.3.6.1.4.1.2435.2.4.3.7 | |||
| etherN | 1.3.6.1.4.1.2435.2.4.3.7.99 | |||
| eNet | 1.3.6.1.4.1.2435.2.4.3.7.99.1 | |||
| brENetModeSupported | 1.3.6.1.4.1.2435.2.4.3.7.99.1.1 | integer | read-only |
ENet Mode 0:not supported 1:supported |
| brENetMode | 1.3.6.1.4.1.2435.2.4.3.7.99.1.2 | integer | read-write |
ENet Mode 0:Auto 1:FD100B 2:100Base 3:FD10B 4:10BASE |
| npPort | 1.3.6.1.4.1.2435.2.4.3.13 | |||
| funa | 1.3.6.1.4.1.2435.2.4.3.13.10 | |||
| brFindPort | 1.3.6.1.4.1.2435.2.4.3.13.10.1 | integer | read-write | |
| brFindTime | 1.3.6.1.4.1.2435.2.4.3.13.10.2 | integer | read-write | |
| npSet | 1.3.6.1.4.1.2435.2.4.3.99 | |||
| dns | 1.3.6.1.4.1.2435.2.4.3.99.1 | |||
| brDNSSupported | 1.3.6.1.4.1.2435.2.4.3.99.1.1 | integer | read-only |
DNS resolver 0:not supported 1:supported This is the obsolete MIB that is not currently used. |
| brPrimaryDNSIP | 1.3.6.1.4.1.2435.2.4.3.99.1.2 | octet string | read-write |
Primary DNS IP Address. This is the obsolete MIB that is not currently used. |
| brSecondaryDNSIP | 1.3.6.1.4.1.2435.2.4.3.99.1.3 | octet string | read-write |
Secondary DNS IP Address This is the obsolete MIB that is not currently used. |
| brDNSIPSetup | 1.3.6.1.4.1.2435.2.4.3.99.1.4 | integer | read-write |
DNS mode 1:static 2:auto Enumeration: 'auto': 2, 'static': 1. |
| brTCPIPConnectTime | 1.3.6.1.4.1.2435.2.4.3.99.1.5 | integer | read-write |
TCP/IP connect time. |
| brAdvancedDNSSupported | 1.3.6.1.4.1.2435.2.4.3.99.1.6 | integer | read-only |
DNS resolver 0:not supported 1:supported |
| brPrimaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.3.99.1.7 | ipaddress | read-write |
Primary DNS IP Address |
| brSecondaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.3.99.1.8 | ipaddress | read-write |
Secondary DNS IP Address |
| brPOP3ServerName | 1.3.6.1.4.1.2435.2.4.3.99.1.9 | octet string | read-write |
The FQDN name of the POP3 server. |
| brSMTPServerName | 1.3.6.1.4.1.2435.2.4.3.99.1.10 | octet string | read-write |
The FQDN name of the SMTP server. |
| pushstatus | 1.3.6.1.4.1.2435.2.4.3.99.2 | |||
| brPushStatusSupported | 1.3.6.1.4.1.2435.2.4.3.99.2.1 | integer | read-only |
Notification 0:not supported 1:supported |
| priadmin | 1.3.6.1.4.1.2435.2.4.3.99.2.2 | |||
| brPriMailAddress | 1.3.6.1.4.1.2435.2.4.3.99.2.2.1 | octet string | read-write |
Primary Mail Address |
| brPriError | 1.3.6.1.4.1.2435.2.4.3.99.2.2.2 | integer | read-write |
Primary Error |
| secadmin | 1.3.6.1.4.1.2435.2.4.3.99.2.3 | |||
| brSecMailAddress | 1.3.6.1.4.1.2435.2.4.3.99.2.3.1 | octet string | read-write |
Secondary Mail Address |
| brSecError | 1.3.6.1.4.1.2435.2.4.3.99.2.3.2 | integer | read-write |
Secondary Error |
| brNotificationCount | 1.3.6.1.4.1.2435.2.4.3.99.2.4 | integer | read-only |
Maximum number of Notification Method. |
| brNotificationTable | 1.3.6.1.4.1.2435.2.4.3.99.2.5 | no-access |
This table represents Notification Method. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.2.5.1 | no-access |
A row in the Notification table. Rows cannot be created or deleted. |
||
| brNotificationIndex | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.1 | integer | read-only |
The number. |
| brNotificationAddress | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.2 | octet string | read-write |
The Notification Address. |
| brNotificationStatusGroup | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.3 | integer | read-write |
The Notification Status group |
| brNotificationShowURLInfo | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.4 | integer | read-write |
The setting of show URL infomation at Notification mail. |
| brNotificationErrorRule | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.5 | octet string | read-write |
The setting of sending requirements for Notification. |
| brNotificationRestoration | 1.3.6.1.4.1.2435.2.4.3.99.2.5.1.6 | integer | read-write |
The setting of Restoration Notification mail Enumeration: 'on': 2, 'off': 1. |
| brPrintersEmailaddress | 1.3.6.1.4.1.2435.2.4.3.99.2.6 | octet string | read-write |
The Printers Email Address. |
| brNotificationVersion | 1.3.6.1.4.1.2435.2.4.3.99.2.7 | octet string | read-only |
The version of Notification |
| brShowIPAddressInfo | 1.3.6.1.4.1.2435.2.4.3.99.2.8 | integer | read-write |
The setting of show IP address infomation at Notification mail. Enumeration: 'on': 2, 'off': 1. |
| brNotificationRuleTable | 1.3.6.1.4.1.2435.2.4.3.99.2.50 | no-access |
This table represents Notification Method. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.2.50.1 | no-access |
A row in the Notification rule table. Rows cannot be created or deleted. |
||
| brNotificationRuleIndex | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.1 | integer | read-only |
The number. |
| brNotificationStatusID | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.2 | integer | read-write |
The Notification Status group ID Enumeration: 'changeDrum': 9, 'tonerEmpty': 4, 'coverOpen': 1, 'userConsumableWarning': 5, 'outputFull': 12, 'servicemanConsumableWarning': 7, 'notInstalled': 13, 'otherErrors': 15, 'servicemanConsumableError': 8, 'memoryFull': 10, 'jam': 2, 'inputMediaError': 11, 'machineError': 14, 'tonerLow': 3, 'userConsumableError': 6. |
| brNotificationMainRule | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.3 | integer | read-write |
The main rule of Notification setting. Enumeration: 'minutes': 4, 'times': 3, 'off': 1, 'everytime': 2. |
| brNotificationRuleValue | 1.3.6.1.4.1.2435.2.4.3.99.2.50.1.4 | integer | read-write |
The value of Notification setting. |
| pjl | 1.3.6.1.4.1.2435.2.4.3.99.3 | |||
| pjlinfo | 1.3.6.1.4.1.2435.2.4.3.99.3.1 | |||
| brPJLInfoOptionsTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1 | no-access |
This table represents PJLInfoOptions. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1 | no-access |
A row in the PJLInfoOptions table. Rows cannot be created or deleted. |
||
| brPJLInfoOptionsIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.1 | integer | read-only |
The number. |
| brPJLInfoOptions | 1.3.6.1.4.1.2435.2.4.3.99.3.1.1.1.2 | octet string | read-only |
The PJLInfoOptions. |
| brPJLInfoIntrayconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2 | no-access |
This table represents PJLInfoIntrayconfig. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1 | no-access |
A row in the PJLInfoIntrayconfig table. Rows cannot be created or deleted. |
||
| brPJLInfoIntrayconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.1 | integer | read-only |
The number. |
| brPJLInfoIntrayconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.2.1.2 | octet string | read-only |
The PJLInfoIntrayconfig. |
| brPJLInfoOuttrayconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3 | no-access |
This table represents PJLInfoOuttrayconfig. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1 | no-access |
A row in the PJLInfoOuttrayconfig table. Rows cannot be created or deleted. |
||
| brPJLInfoOuttrayconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.1 | integer | read-only |
The number. |
| brPJLInfoOuttrayconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.3.1.2 | octet string | read-only |
The PJLInfoOuttrayconfig. |
| brPJLInfoDXconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4 | no-access |
This table represents PJLInfoDXconfig. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1 | no-access |
A row in the PJLInfoDXconfig table. Rows cannot be created or deleted. |
||
| brPJLInfoDXconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.1 | integer | read-only |
The number. |
| brPJLInfoDXconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.4.1.2 | octet string | read-only |
The PJLInfoDXconfig. |
| brPJLInfoStorageconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5 | no-access |
This table represents PJLInfoStorageconfig. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1 | no-access |
A row in the PJLInfoStorageconfig table. Rows cannot be created or deleted. |
||
| brPJLInfoStorageconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.1 | integer | read-only |
The number. |
| brPJLInfoStorageconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.5.1.2 | octet string | read-only |
The PJLInfoStorageconfig. |
| brPJLInfoFirmwareUpdateconfigTable | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6 | no-access |
This table represents PJLInfoFirmwareUpdateconfig. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1 | no-access |
A row in the PJLInfoFirmwareUpdateconfig table. Rows cannot be created or deleted. |
||
| brPJLInfoFirmwareUpdateconfigIndex | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.1 | integer | read-only |
The number. |
| brPJLInfoFirmwareUpdateconfig | 1.3.6.1.4.1.2435.2.4.3.99.3.1.6.1.2 | octet string | read-only |
The PJLInfoFirmwareUpdateconfig. |
| eMailReports | 1.3.6.1.4.1.2435.2.4.3.99.4 | |||
| brEmailReportsSupported | 1.3.6.1.4.1.2435.2.4.3.99.4.1 | integer | read-only |
E-mail reports 0:not supported 1:supported |
| brEmailReportsCount | 1.3.6.1.4.1.2435.2.4.3.99.4.2 | integer | read-only |
The number of Administrator for E-mail reports. |
| brEmailReportsTable | 1.3.6.1.4.1.2435.2.4.3.99.4.11 | no-access |
This table represents E-mail reports. |
|
| 1.3.6.1.4.1.2435.2.4.3.99.4.11.1 | no-access |
A row in the BrEmailReportsEntry table. Rows cannot be created or deleted. |
||
| brEmailReportsIndex | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.1 | integer | read-only |
The number. |
| brEmailReportsAddress | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.2 | octet string | read-write |
The E-mail address of Administrator for E-mail reports. |
| brEmailReportsFrequency | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.3 | integer | read-write |
The frequency of sending E-mail reports. Enumeration: 'monthly': 3, 'daily': 1, 'weekly': 2. |
| brEmailReportsTime | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.4 | octet string | read-write |
The time setting for E-mail reports. |
| brEmailReportsWeek | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.5 | integer | read-write |
The setting of day of the week for E-mail reports. Enumeration: 'monday': 2, 'tuesday': 3, 'friday': 6, 'wednesday': 4, 'thursday': 5, 'sunday': 1, 'saturday': 7. |
| brEmailReportsDate | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.6 | integer | read-write |
The setting of day for E-mail reports when real time clock exists. |
| brEmailReportsSendReportNow | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.7 | integer | read-write |
The setting of Send Report Now function for E-mail reports. Enumeration: 'on': 2, 'off': 1. |
| brEmailReportsSendReportatPowerOn | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.8 | integer | read-write |
The setting of Send Report at PowerOn for E-mail reports. Enumeration: 'on': 2, 'off': 1. |
| brEmailReportsNoRTCFrequency | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.9 | integer | read-write |
The setting of day for E-mail reports when real time clock does not exists. |
| brEmailReportsReportFormat | 1.3.6.1.4.1.2435.2.4.3.99.4.11.1.10 | integer | read-write |
The setting of ReportFormat for E-mail reports. Enumeration: 'plaintext': 1, 'xml': 2. |
| wireless | 1.3.6.1.4.1.2435.2.4.3.100 | |||
| wlInfo | 1.3.6.1.4.1.2435.2.4.3.100.1 | |||
| wlCapability | 1.3.6.1.4.1.2435.2.4.3.100.1.1 | |||
| brpsWLanDot11Supported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.1 | integer | read-only |
Flags per bit. 802.11a bit1=1 802.11b bit2=1 802.11g bit3=1 |
| brpsWLanAvailableChannel | 1.3.6.1.4.1.2435.2.4.3.100.1.1.2 | octet string | read-only |
The available channel list. |
| brpsWLanCapabilityEncryptModeCount | 1.3.6.1.4.1.2435.2.4.3.100.1.1.3 | integer | read-only |
index |
| brpsWLanCapabilityEncryptModeTable | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1 | no-access | |||
| brpsWLanCapabilityEncryptModeIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.1 | integer | read-only |
index |
| brpsWLanCapabilityEncryptModeType | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.2 | integer | read-only |
Encrypt Mode Type Enumeration: 'tkip': 3, 'ckip': 5, 'none': 1, 'wep': 2, 'aes': 4. |
| brpsWLanCapabilityEncryptModeDescription | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.3 | octet string | read-only |
Encrypt Mode description |
| brpsWLanCapabilityEncryptModeSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.4.1.4 | integer | read-only |
0: Not Supported 1: Supported |
| brpsWLanCapabilityAuthModeCount | 1.3.6.1.4.1.2435.2.4.3.100.1.1.5 | integer | read-only |
index |
| brpsWLanCapabilityAuthModeTable | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1 | no-access | |||
| brpsWLanCapabilitAuthModeIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.1 | integer | read-only |
index |
| brpsWLanCapabilityAuthModeType | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.2 | integer | read-only |
Auth Mode Type Enumeration: 'wpa-none': 4, 'eapfast-none': 8, 'shardkey': 2, 'wpa-psk': 3, 'opensystem': 1, 'eapfast-tls': 11, 'wpa2': 6, 'leap': 7, 'eapfast-mschapv2': 9, 'eapfast-gtc': 10, 'wpa2-psk': 12, 'wpa': 5. |
| brpsWLanCapabilityAuthModeDescription | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.3 | octet string | read-only |
Auth Mode description |
| brpsWLanCapabilityAuthModeSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.6.1.4 | integer | read-only |
0: Not Supported 1: Supported |
| brpsWLanCapabilityAuthEAPCount | 1.3.6.1.4.1.2435.2.4.3.100.1.1.7 | integer | read-only |
index |
| brpsWLanCapabilityAuthEAPTable | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1 | no-access | |||
| brpsWLanCapabilityAuthEAPIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.1 | integer | read-only |
index |
| brpsWLanCapabilityAuthEAPType | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.2 | integer | read-only |
Auth EAP Type Enumeration: 'eapfast-none': 6, 'eap-tls': 2, 'eap-md5': 1, 'eapfast-tls': 9, 'peap': 4, 'leap': 5, 'eap-ttls': 3, 'eapfast-mschapv2': 7, 'eapfast-gtc': 8. |
| brpsWLanCapabilityAuthEAPDescription | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.3 | octet string | read-only |
Auth EAP description |
| brpsWLanCapabilityAuthEAPSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.4 | integer | read-only |
0: Not Supported 1: Supported |
| brpsWLanCapabilityAuthEAPSupportAuthentication | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.5 | integer | read-only |
put supported authentication protocol as bit. 1bit:802.1X 2bit:WPA 3bit:WPA2 4bit:CCKM |
| brpsWLanCapabilityAuthEAPSupportEncryption | 1.3.6.1.4.1.2435.2.4.3.100.1.1.8.1.6 | integer | read-only |
put supported encryption as bit. 1bit:WEP 2bit:CKIP 3bit:TKIP 4bit:AES |
| wlGeneralInfo | 1.3.6.1.4.1.2435.2.4.3.100.1.2 | |||
| brpsWLanDestination | 1.3.6.1.4.1.2435.2.4.3.100.1.2.1 | integer | read-only |
The destination of this NIC. |
| brpsWLanTransmitLevel | 1.3.6.1.4.1.2435.2.4.3.100.1.2.2 | integer | read-only |
The level of the transmitting power. |
| brpsPit3WLanTestStatus | 1.3.6.1.4.1.2435.2.4.3.100.1.2.3 | integer | read-only |
The test status of pit3 for WLAN. |
| wlNetSearch | 1.3.6.1.4.1.2435.2.4.3.100.1.11 | |||
| brpsWLanNetSearchSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.11.1 | integer | read-only |
0 indicates the Wireless network serch function is not supported. 1 indicates the Wireless network serch function is implemented by the firmware |
| brpsAvailableWLanScan | 1.3.6.1.4.1.2435.2.4.3.100.1.11.2 | octet string | read-write |
Read: unsupported(1), supported(2) Set: |
| brpsAvailableWLanScanWaitTime | 1.3.6.1.4.1.2435.2.4.3.100.1.11.3 | integer | read-only |
Scan Wait Time |
| brpsAvailableWLanCount | 1.3.6.1.4.1.2435.2.4.3.100.1.11.10 | integer | read-only |
Available wireless LAN count. |
| brpsAvailableWLanTable | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11 | no-access |
This table represents Available Wireless LAN Info. |
|
| 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1 | no-access |
A row in the brpsAvailableWLanTable table. Rows cannot be created or deleted. |
||
| brpsAvailableWLanIndex | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.1 | integer | read-only |
The number. |
| brpsAvailableWLanName | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.2 | octet string | read-only |
The available wireless LAN name. |
| brpsAvailableWLanMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.3 | integer | read-only |
The available wireless LAN mode. Enumeration: 'dot11g': 3, 'dot11b-gAuto': 1, 'dot11b': 2. |
| brpsAvailableWLanCommMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.4 | integer | read-only |
The available wireless LAN communication mode. Enumeration: 'accesPoint': 1, 'adhoc-Wi-Fi': 2. |
| brpsAvailableWLanChannel | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.5 | integer | read-only |
The available wireless LAN channel. |
| brpsAvailableWLanPowerLevel | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.6 | integer | read-only |
The available wireless LAN power level. |
| brpsAvailableWLanAuthMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.7 | integer | read-only |
The available wireless LAN authentication mode. Enumeration: 'active': 2, 'none': 1. |
| brpsAvailableWLanEncryptMode | 1.3.6.1.4.1.2435.2.4.3.100.1.11.11.1.8 | integer | read-only |
The available wireless LAN encryption mode. Enumeration: 'active': 2, 'tkip': 4, 'none': 1, 'wep': 3. |
| wlAOSS | 1.3.6.1.4.1.2435.2.4.3.100.1.12 | |||
| brpsWLanAOSSSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.12.1 | integer | read-only |
0 indicates AOSS is not supported. 1 indicates AOSS is supported. |
| brpsWLanAOSSIsRunnning | 1.3.6.1.4.1.2435.2.4.3.100.1.12.2 | integer | read-only |
|
| wlSES | 1.3.6.1.4.1.2435.2.4.3.100.1.13 | |||
| brpsWLanSESSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.13.1 | integer | read-only |
0 indicates SES is not supported. 1 indicates SES is supported. |
| wlWPS | 1.3.6.1.4.1.2435.2.4.3.100.1.14 | |||
| brpsWLanWPSSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.14.1 | integer | read-only |
0 indicates WPS is not supported. 1 indicates WPS is supported. |
| brpsWLanWPSResult | 1.3.6.1.4.1.2435.2.4.3.100.1.14.2 | integer | read-only |
0 indicates WPS is successful. 1 indicates WPS is not successful. -1 indicates WPS is being set up. |
| wlSimpleWizard | 1.3.6.1.4.1.2435.2.4.3.100.1.15 | |||
| brWlanSimpleWizardSupported | 1.3.6.1.4.1.2435.2.4.3.100.1.15.1 | integer | read-only |
WLAN Simple Wizard support information. 0 indicates Simple Wizard is not supported. 1 indicates Simple Wizard is supported. |
| brWlanSimpleWizardPassword | 1.3.6.1.4.1.2435.2.4.3.100.1.15.2 | octet string | read-write |
Simple Wizard Password. Max size 64 |
| wlSetup | 1.3.6.1.4.1.2435.2.4.3.100.11 | |||
| wlGeneral | 1.3.6.1.4.1.2435.2.4.3.100.11.1 | |||
| brpsWLanAPSetupMode | 1.3.6.1.4.1.2435.2.4.3.100.11.1.1 | integer | read-only |
AP setup mode status. Enumeration: 'true': 2, 'false': 1. |
| brpsWLanMode | 1.3.6.1.4.1.2435.2.4.3.100.11.1.2 | integer | read-write |
Wireless LAN mode. Enumeration: 'dot11g': 3, 'dot11b-gAuto': 1, 'dot11b': 2, 'dot11g-turbo': 4. |
| brpsWLanName | 1.3.6.1.4.1.2435.2.4.3.100.11.1.3 | octet string | read-write |
The SSID setting. |
| brpsWLanCommMode | 1.3.6.1.4.1.2435.2.4.3.100.11.1.4 | integer | read-write |
Wireless LAN communication mode. Enumeration: 'ad-Hoc': 3, 'infrastructure': 1, 'ad-Hoc-WiFi': 2. |
| brpsWLanChannel | 1.3.6.1.4.1.2435.2.4.3.100.11.1.5 | integer | read-write |
Wireless LAN channel setting. |
| wlAdvanced | 1.3.6.1.4.1.2435.2.4.3.100.11.5 | |||
| brpsWLanCtsMode | 1.3.6.1.4.1.2435.2.4.3.100.11.5.1 | integer | read-write |
Wireless LAN CTS mode setting. Enumeration: 'auto': 1, 'none': 3, 'always': 2. |
| brpsWLanCtsRate | 1.3.6.1.4.1.2435.2.4.3.100.11.5.2 | integer | read-write |
Wireless LAN CTS rate setting. However, the unit is 1/10. |
| brpsWLanCtsType | 1.3.6.1.4.1.2435.2.4.3.100.11.5.3 | integer | read-write |
Wireless LAN CTS type setting. Enumeration: 'only': 1, 'rts-cts': 2. |
| brpsWLanRtsCtsThreshold | 1.3.6.1.4.1.2435.2.4.3.100.11.5.4 | integer | read-write |
Wireless LAN RTS/CTS threshold setting. |
| brpsWLanLengthThreshold | 1.3.6.1.4.1.2435.2.4.3.100.11.5.5 | integer | read-write |
Wireless LAN length threshold setting. |
| brpsWLanDataRetry | 1.3.6.1.4.1.2435.2.4.3.100.11.5.6 | integer | read-write |
Wireless LAN DATA retyr setting. |
| brpsWLanTransmitPowerSetting | 1.3.6.1.4.1.2435.2.4.3.100.11.5.7 | integer | read-write |
Wireless LAN transmit power setting. Enumeration: 'full': 1, 'one-eighth': 4, 'minimum': 5, 'half': 2, 'off': 6, 'quarter': 3. |
| brpsWLanDeviceType | 1.3.6.1.4.1.2435.2.4.3.100.11.5.8 | integer | read-write |
Wireless LAN operation mode setting. Enumeration: 'accessPointMode': 2, 'stationMode': 1. |
| wlAssociate | 1.3.6.1.4.1.2435.2.4.3.100.11.11 | |||
| brpsWLanEncryptMode | 1.3.6.1.4.1.2435.2.4.3.100.11.11.1 | integer | read-write |
Wireless LAN encrypt mode. Enumeration: 'tkip': 3, 'none': 1, 'wep': 2, 'aes': 4. |
| brpsWLanAuthMode | 1.3.6.1.4.1.2435.2.4.3.100.11.11.11 | integer | read-write |
Wireless LAN authenticate mode. Enumeration: 'wpa-none': 4, 'eapfast-none': 8, 'sharedKey': 2, 'wpa-psk': 3, 'openSystem': 1, 'eapfast-tls': 11, 'wpa2': 6, 'leap': 7, 'eapfast-mschapv2': 9, 'eapfast-gtc': 10, 'wpa2-psk': 12, 'wpa': 5. |
| brpsWLanAuthEAP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.12 | integer | read-write |
Wireless LAN authenticate EAP. Enumeration: 'eapfast-none': 6, 'eapfast-tls': 9, 'leap': 5, 'peap': 4, 'eapTTLS': 3, 'eapTLS': 2, 'eapMD5': 1, 'eapfast-mschapv2': 7, 'eapfast-gtc': 8. |
| brpsWLanAuthUserID | 1.3.6.1.4.1.2435.2.4.3.100.11.11.13 | octet string | read-write |
Wireless LAN authenticate user ID. |
| brpsWLanAuthUserPass | 1.3.6.1.4.1.2435.2.4.3.100.11.11.14 | octet string | read-write |
Wireless LAN authenticate user password. |
| brpsWLanAssociate | 1.3.6.1.4.1.2435.2.4.3.100.11.11.21 | integer | read-write |
Wireless LAN associate. Enumeration: 'print': 2, 'test': 3, 'applyonly': 4, 'update': 1, 'simplewizard': 5. |
| brpsWLanAssociateTestResult | 1.3.6.1.4.1.2435.2.4.3.100.11.11.22 | integer | read-only |
Wireless LAN associate test result. 0 indicates cleared. Enumeration: 'linkOK': 1, 'noSuchWLan': 2, 'invalidAuthUserID': 4, 'invalidWLanNetKey': 3, 'invalidAuthUserPass': 5. |
| brpsWLanAssociateResult | 1.3.6.1.4.1.2435.2.4.3.100.11.11.23 | integer | read-only |
Wireless LAN associate result. 0 indicates cleared. Enumeration: 'linkOK': 1, 'noSuchWLan': 2, 'invalidAuthUserID': 4, 'invalidWLanNetKey': 3, 'invalidAuthUserPass': 5. |
| brpsWLanAssociateTestSupported | 1.3.6.1.4.1.2435.2.4.3.100.11.11.24 | integer | read-only |
0 indicates the Wireless network Associate Test function is not supported. 1 indicates the Wireless network Associate Test function is implemented by the firmware |
| wlWEP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101 | |||
| brpsWLanWepKeyDefaultIndex | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.1 | integer | read-write |
The value of brpsWLanWepKeyIndex corresponding to the default setting. |
| brpsWLanWepKeyTable | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11 | no-access |
This table represents WEP KEY Info. |
|
| 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1 | no-access |
A row in the brpsWLanWepKeyTable table. Rows cannot be created or deleted. |
||
| brpsWLanWepKeyIndex | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.1 | integer | read-only |
The number. |
| brpsWLanWepKeySize | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.2 | integer | read-write |
The WEP KEY size. Enumeration: 'size40': 1, 'size104': 2. |
| brpsWLanWepKeyType | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.3 | integer | read-write |
The WEP KEY type. Enumeration: 'ascii': 2, 'hex': 1. |
| brpsWLanWepKey | 1.3.6.1.4.1.2435.2.4.3.100.11.11.101.11.1.4 | octet string | read-write |
The WEP KEY. |
| wlWPA | 1.3.6.1.4.1.2435.2.4.3.100.11.11.102 | |||
| brpsWLanNetworkKey | 1.3.6.1.4.1.2435.2.4.3.100.11.11.102.1 | octet string | read-write |
The WPA-PSK. |
| wlTKIP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.103 | |||
| brpsWLanTKIPChangeInterval | 1.3.6.1.4.1.2435.2.4.3.100.11.11.103.1 | integer | read-write |
TKIP Interval (s) |
| wlLEAP | 1.3.6.1.4.1.2435.2.4.3.100.11.11.104 | |||
| brpsWLanLEAPTimeout | 1.3.6.1.4.1.2435.2.4.3.100.11.11.104.1 | integer | read-write |
Leap timeout (s) |
| wlStatus | 1.3.6.1.4.1.2435.2.4.3.100.21 | |||
| wlGeneralStatus | 1.3.6.1.4.1.2435.2.4.3.100.21.1 | |||
| brpsWLanOperatingMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.1 | integer | read-only |
The mode which is actually operating. off(0), dot11a(1), dot11b(2), dot11g(3) |
| brpsWLanRSSLevel | 1.3.6.1.4.1.2435.2.4.3.100.21.1.2 | integer | read-only |
Wireless LAN RSS Level. |
| brpsWLanCommSpeed | 1.3.6.1.4.1.2435.2.4.3.100.21.1.3 | integer | read-only |
Wireless LAN communication speed. However, the unit is 1/10. |
| brpsWLanOperatingChannel | 1.3.6.1.4.1.2435.2.4.3.100.21.1.4 | integer | read-only |
Wireless LAN operating channel. |
| brpsWLanOperatingName | 1.3.6.1.4.1.2435.2.4.3.100.21.1.5 | octet string | read-only |
Wireless LAN operating SSID Name. |
| brpsWLanOperatingCommMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.6 | integer | read-only |
Wireless LAN operating communication mode. off(0), infrastructure(1), ad-Hoc-WiFi(2), ad-Hoc(3) |
| brpsWLanOperatingEncryptMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.7 | integer | read-only |
Wireless LAN operating encrypt mode. off(0), none(1), wep(2), tkip(3), aes(4), ckip(5) |
| brpsWLanOperatingAuthMode | 1.3.6.1.4.1.2435.2.4.3.100.21.1.8 | integer | read-only |
Wireless LAN operating authenticate mode. off(0), openSystem(1), sharedKey(2), wpa-psk(3), wpa-none(4), wpa(5), wpa2(6), leap(7), eapfast-none(8), eapfast-mschapv2(9), eapfast-gtc(10), eapfast-tls(11), wpa2-psk(12) |
| brpsWLanOperatingWepKeyDefaultIndex | 1.3.6.1.4.1.2435.2.4.3.100.21.1.9 | integer | read-only |
Wireless LAN operating WepKeyDefaultIndex. |
| brnetConfig | 1.3.6.1.4.1.2435.2.4.3.1240 | |||
| brconfig | 1.3.6.1.4.1.2435.2.4.3.1240.1 | |||
| brpsNodeName | 1.3.6.1.4.1.2435.2.4.3.1240.1.1 | displaystring | read-write |
The node name of this print server. |
| brpsSerialNumber | 1.3.6.1.4.1.2435.2.4.3.1240.1.2 | displaystring | read-only |
The serial number of this print server. |
| brpsHardwareType | 1.3.6.1.4.1.2435.2.4.3.1240.1.3 | integer | read-only |
Hardware type of the print server. |
| brpsMainRevision | 1.3.6.1.4.1.2435.2.4.3.1240.1.4 | displaystring | read-only |
Revision level of the Print Server firmware suitable for display. This object may be read but not written. |
| brpsBootRevision | 1.3.6.1.4.1.2435.2.4.3.1240.1.5 | displaystring | read-only |
Revision level of the boot firmware (if applicable) suitable for display. This object may be read but not written. |
| brpsPasswordVerify | 1.3.6.1.4.1.2435.2.4.3.1240.1.6 | displaystring | read-write |
Submit the print server's password for verification. An error will be returned if the password is incorrect. |
| brpsPassword | 1.3.6.1.4.1.2435.2.4.3.1240.1.7 | displaystring | read-write |
Set the print server's password value. |
| brpsMIBVersion | 1.3.6.1.4.1.2435.2.4.3.1240.1.8 | displaystring | read-only |
Revision level of the private MIB implemented by the device. For example: 1.0 This object may be read but not written. |
| brpsOEMString | 1.3.6.1.4.1.2435.2.4.3.1240.1.9 | displaystring | read-only |
OEM string setting for the print server. This object may be read but not written. |
| brpsMIBMajor | 1.3.6.1.4.1.2435.2.4.3.1240.1.10 | integer | read-only |
MIB major version number. |
| brpsMIBMinor | 1.3.6.1.4.1.2435.2.4.3.1240.1.11 | integer | read-only |
MIB minor version number. |
| brpsServerDescription | 1.3.6.1.4.1.2435.2.4.3.1240.1.12 | displaystring | read-write |
Product name of print server. For example: NC-3100h This object may be read but not written. |
| brpsEnetMode | 1.3.6.1.4.1.2435.2.4.3.1240.1.13 | integer | read-write |
Ethernet type. |
| brpsFlashROMSize | 1.3.6.1.4.1.2435.2.4.3.1240.1.14 | integer | read-only |
Flash ROM Size of print server (MBytes). |
| brpsSNMPGetCommunity | 1.3.6.1.4.1.2435.2.4.3.1240.1.15 | displaystring | read-only |
SNMP Get Community Name. |
| brpsSNMPJetAdmin | 1.3.6.1.4.1.2435.2.4.3.1240.1.16 | integer | read-only |
0 indicates the JetAdmin compatibility mode is not enabled. 1 indicates JetAdmin compatibility mode is enabled. |
| brpsSNMPSetCommunity1 | 1.3.6.1.4.1.2435.2.4.3.1240.1.17 | displaystring | read-only |
SNMP Set Community Name #1. |
| brpsSNMPSetCommunity2 | 1.3.6.1.4.1.2435.2.4.3.1240.1.18 | displaystring | read-only |
SNMP Set Community Name #2. |
| brSupportedInfo | 1.3.6.1.4.1.2435.2.4.3.1240.1.200 | octet string | read-only | |
| brcontrol | 1.3.6.1.4.1.2435.2.4.3.1240.2 | |||
| brpsTestPage | 1.3.6.1.4.1.2435.2.4.3.1240.2.1 | integer | read-write |
Setting any value generates a test page on all ports. |
| brpsSetDefault | 1.3.6.1.4.1.2435.2.4.3.1240.2.2 | integer | read-write |
Setting the value 5AA5h (23205) resets all parameters to their factory default value. |
| brpsReset | 1.3.6.1.4.1.2435.2.4.3.1240.2.3 | integer | read-write |
Setting the value 55AAh (21930) causes the print server to perform a soft reset. |
| brpsProtectModeEnable | 1.3.6.1.4.1.2435.2.4.3.1240.2.4 | integer | read-only |
0 indicates the protect mode is not enabled. 1 indicates protect mode is enabled. |
| brpsProtectPassword | 1.3.6.1.4.1.2435.2.4.3.1240.2.5 | displaystring | read-only |
protect password. |
| brport | 1.3.6.1.4.1.2435.2.4.3.1240.3 | |||
| brpsPortCount | 1.3.6.1.4.1.2435.2.4.3.1240.3.1 | integer | read-only |
Number of ports on this print server. |
| brpsPortInfoTable | 1.3.6.1.4.1.2435.2.4.3.1240.3.2 | no-access |
This table represents the attributes of a port. |
|
| 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1 | no-access |
A row in the port table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brpsPortIndex | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.1 | integer | read-only |
The port number. |
| brpsPortName | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.2 | displaystring | read-write |
The port name. |
| brpsPortType | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.3 | integer | read-only |
Type of port. Enumeration: 'serial': 2, 'parallel': 1. |
| brpsPortStatus | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.4 | integer | read-only |
The port status as a 32 bit integer. |
| brpsPortStatusString | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.5 | displaystring | read-only |
The port status description. Reflects the printer's front panel display on internal print server interfaces. |
| brpsPortProtocol | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.6 | integer | read-only |
Protocol currently printing on this port. |
| brpsPortQueueSize | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.7 | integer | read-only |
Number of protocols waiting to print on this port. |
| brpsPortDescriptionString | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.8 | displaystring | read-only |
The port description. Reflects the device ID of the printer connected to the port. |
| brpsPortInfoString | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.9 | displaystring | read-only |
The port status information. More information about the port status. |
| brpsPortHTTPExtensions | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.10 | integer | read-only |
0 indicates the printer on this port does not support HTTP, 1 indicates that the printer does support HTTP. |
| brpsPortSNMPExtensions | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.11 | integer | read-only |
0 indicates the printer on this port does not support SNMP, 1 indicates that the printer does support SNMP. |
| brpsPortAttribute | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.12 | displaystring | read-write |
Port attribute. |
| brpsPortBinaryMode | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.13 | integer | read-write |
Port binary mode. |
| brpsPortInhibitDatagramSupport | 1.3.6.1.4.1.2435.2.4.3.1240.3.2.1.14 | integer | read-write |
0 indicates the inhibit datagram is not supported. 1 indicates the inhibit datagram is supported. |
| brservice | 1.3.6.1.4.1.2435.2.4.3.1240.4 | |||
| brpsServiceCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.1 | integer | read-only |
Number of services on this print server. |
| brpsServiceInfoTable | 1.3.6.1.4.1.2435.2.4.3.1240.4.2 | no-access |
This table represents the attributes of a service. |
|
| 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1 | no-access |
A row in the services table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brpsServiceIndex | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.1 | integer | read-only |
The service number. |
| brpsServiceName | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.2 | displaystring | read-write |
The service name. |
| brpsServicePort | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.3 | integer | read-write |
The port number assigned to this service. |
| brpsServiceFilter | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.4 | integer | read-write |
Filter number assigned to this service. |
| brpsServiceBOT | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.5 | integer | read-write |
Beginning of text string number assigned to this service. |
| brpsServiceEOT | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.6 | integer | read-write |
End of text string number assigned to this service. |
| brpsServiceMatch | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.7 | integer | read-write |
Match string number assigned to this service. |
| brpsServiceReplace | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.8 | integer | read-write |
Replace string number assigned to this service. |
| brpsServiceTCPPort | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.9 | integer | read-write |
TCP Port number assigned to this service. |
| brpsServiceNDSTree | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.10 | displaystring | read-write |
The NDS Tree. |
| brpsServiceNDSContext | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.11 | octet string | read-write |
The NDS Context in Unicode. |
| brpsServiceVines | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.12 | displaystring | read-write |
The Vines StreetTalk name for this service. |
| brpsServiceObsolete | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.13 | integer | read-write |
Obsolete parameter that is no longer used |
| brpsServiceNetwareServerCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.14 | integer | read-write |
The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged. |
| brpsServiceReceiveOnly | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.15 | integer | read-write |
When enabled, the service will only receive data, any printer responses will be discarded. |
| brpsServiceTCPQueued | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.16 | integer | read-write |
When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available |
| brpsServiceProtocolLAT | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.17 | integer | read-write |
When enabled, the LAT protocol will be available on this service. |
| brpsServiceProtocolTCPIP | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.18 | integer | read-write |
When enabled, the TCP/IP protocol will be available on this service. |
| brpsServiceProtocolNetware | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.19 | integer | read-write |
When enabled, the Netware protocol will be available on this service. |
| brpsServiceProtocolAppleTalk | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.20 | integer | read-write |
When enabled, the AppleTalk protocol will be available on this service. |
| brpsServiceProtocolBanyan | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.21 | integer | read-write |
When enabled, the Banyan protocol will be available on this service. |
| brpsServiceProtocolDLC | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.22 | integer | read-write |
When enabled, the DLC protocol will be available on this service. |
| brpsServiceProtocolNetBEUI | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.23 | integer | read-write |
When enabled, the NetBEUI protocol will be available on this service. |
| brpsServiceNetwareServerMode | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.24 | integer | read-write |
Netware mode for this service. 0 = Queue Server, 1 = Remote Printer |
| brpsServiceNetwareRemotePrinterNum | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.25 | integer | read-write |
Remote Printer Number for this service |
| brpsServiceProtocolIPP | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.26 | integer | read-write |
When enabled, the IPP protocol will be available on this service. |
| brpsServiceAppleTalkType | 1.3.6.1.4.1.2435.2.4.3.1240.4.2.1.27 | displaystring | read-write |
AppleTalk type. |
| brpsServiceStringLimit | 1.3.6.1.4.1.2435.2.4.3.1240.4.3 | integer | read-only |
Maximum number of service strings supported by the print server. |
| brpsServiceStringInfoTable | 1.3.6.1.4.1.2435.2.4.3.1240.4.4 | no-access |
This table represents the service BOT/EOT/MATCH/REPLACE strings defined. |
|
| 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1 | no-access |
A row in the service string table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brpsServiceStringIndex | 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.1 | integer | read-only |
The string number. |
| brpsServiceString | 1.3.6.1.4.1.2435.2.4.3.1240.4.4.1.2 | displaystring | read-write |
The character string definition suitable for displaying. |
| brpsServiceStringCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.5 | integer | read-only |
Number of service strings currently defined on the print server. |
| brpsServiceFilterCount | 1.3.6.1.4.1.2435.2.4.3.1240.4.6 | integer | read-only |
Number of service filters implemented by the device. |
| brprotocol | 1.3.6.1.4.1.2435.2.4.3.1240.5 | |||
| brlat | 1.3.6.1.4.1.2435.2.4.3.1240.5.1 | |||
| brpsLATSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.1 | integer | read-only |
0 indicates the LAT protocol is not supported. 1 indicates LAT support is implemented by the firmware |
| brpsLATEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.2 | integer | read-write |
0 indicates the LAT protocol is not enabled. 1 indicates that the LAT protocol is enabled. Writing a non-zero value will enable the LAT protocol if it is supported by the firmware. |
| brpsLATCircuitTimer | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.3 | integer | read-write |
Minimum time (in milliseconds) between transmissions to the host. The default of 10 normally provides the best performance. |
| brpsLATKeepAliveTimer | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.4 | integer | read-write |
How often in seconds a packet is transmitted to keep a connection alive. |
| brpsLATReceiveBufferMax | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.5 | integer | read-write |
LAT receive buffer max size. |
| brpsLATTransmitBufferMax | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.6 | integer | read-write |
LAT transmit buffer max size. |
| brpsLATTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.7 | integer | read-write |
LAT inactivity timeout (sec). |
| brpsLATGroup | 1.3.6.1.4.1.2435.2.4.3.1240.5.1.8 | displaystring | read-write |
LAT group membership (mm-[nn]). |
| brtcpip | 1.3.6.1.4.1.2435.2.4.3.1240.5.2 | |||
| brpsTCPIPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.1 | integer | read-only |
0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP support is implemented by the firmware |
| brpsTCPIPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.2 | integer | read-write |
0 indicates the TCP/IP protocol is not enabled. 1 indicates that the TCP/IP protocol is enabled. Writing a non-zero value will enable the TCP/IP protocol if it is supported by the firmware. |
| brpsTCPIPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.3 | ipaddress | read-write |
IP Address assigned to the print server. |
| brpsTCPIPSubnetMask | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.4 | ipaddress | read-write |
Subnet mask assigned to the print server. |
| brpsTCPIPGateway | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.5 | ipaddress | read-write |
Gateway/Router address assigned to the print server. |
| brpsTCPIPMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.6 | integer | read-write |
Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol. |
| brpsTCPIPTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.7 | integer | read-write |
Timeout used for LPD connections. |
| brpsTCPIPBootTries | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.8 | integer | read-write |
Number of attempts to use BOOTP, RARP, and DHCP. |
| brpsTCPIPMaxWindow | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.9 | integer | read-write |
Maximum window size for TCP connections. Due to resource limitations setting the window to values greater than 10240 is not recommended. |
| brpsTCPIPRARPNoSubnet | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.10 | integer | read-write |
If enabled, do not set the subnet mask based on the RARP response. |
| brpsTCPIPRARPNoGateway | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.11 | integer | read-write |
If enabled, do not set the gateway/router address based on the RARP response. |
| brpsTCPIPUpdate | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.12 | octet string | read-write |
Hardware MAC address to be updated. This value is write only. Will read back as zeros. |
| brpsTCPIPBanner | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.13 | integer | read-write |
0 indicates the LPR banner print is not enabled. 1 indicates that the LPR banner print is enabled. |
| brpsTCPIPFastTimeoutEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.14 | integer | read-write |
0 indicates the fast timeout is not enabled. 1 indicates that the fast timeout is enabled. |
| brpsTCPIPLPRRetryEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.15 | integer | read-write |
0 indicates the LPR print retry is not enabled. 1 indicates that the LPR print retry is enabled. |
| brpsTCPIPUseMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.16 | integer | read-write |
Method type that used set up TCP/IP configuration. |
| brpsTCPIPMethodServer | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.17 | ipaddress | read-write |
If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| brpsTCPIPAccessTable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18 | no-access |
This table represents the list of IP address of node that has parmittion for access.Up to 16 Netware addresses can be enabled. |
|
| 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1 | no-access |
A row in the TCP/IP access table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brpsTCPIPAccessIndex | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.1 | integer | read-only |
The TCP/IP access table's index. |
| brpsTCPIPAccessNodeAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.2 | ipaddress | read-write |
IP address of node that has parmittion for access. |
| brpsTCPIPAccessSubnetMask | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.18.1.3 | ipaddress | read-write |
Subnet mask of node that has parmittion for access. |
| brpsAdvancedTCPIPAccessSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.19 | integer | read-only |
0 indicates the Advanced TCP/IP Access is not supported. 1 indicates Advanced TCP/IP Access support is implemented by the firmware |
| brpsAdvancedTCPIPAccessEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.20 | integer | read-write |
0 indicates the Advanced TCP/IP Access is not enabled. 1 indicates that the Advanced TCP/IP Access is enabled. |
| brpsAdvancedTCPIPAccessAdministratorIPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.21 | ipaddress | read-write |
Administrator IPAddress. |
| brpsAdvancedTCPIPAccessSetting | 1.3.6.1.4.1.2435.2.4.3.1240.5.2.22 | integer | read-write |
0 indicates the Advanced TCP/IP Access is reject. 1 indicates that the Advanced TCP/IP Access is Accept. |
| brnetware | 1.3.6.1.4.1.2435.2.4.3.1240.5.3 | |||
| brpsNetwareSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.1 | integer | read-only |
0 indicates the Netware protocol is not supported. 1 indicates Netware support is implemented by the firmware. 2 indicates that Netware NEST NDS support is implemented by the firmware. |
| brpsNetwareEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.2 | integer | read-write |
0 indicates the Netware protocol is not enabled. 1 indicates that the Netware protocol is enabled. Writing a non-zero value will enable the Netware protocol if it is supported by the firmware. |
| brpsNetwareFrameType | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.3 | integer | read-write |
The frame type to be used as follows: 0 = Automatic, 1 = Ethernet 802.3, 2 = Ethernet II, 3 = Ethernet 802.2, 4 = Ethernet SNAP. |
| brpsNetwarePollFreq | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.4 | integer | read-write |
File server polling frequency in seconds. |
| brpsNetwareAdvFreq | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.5 | integer | read-write |
Print server advertising frequency in seconds. |
| brpsNetwarePassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.6 | displaystring | read-write |
The Netware login password. |
| brpsNetwareRestart | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.7 | integer | read-write |
Setting any value will restart the Netware protocol. |
| brpsNetwareServerTable | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8 | no-access |
This table represents the list of enabled Netware servers. Up to 16 Netware servers can be enabled. If the service is configured for remote printer mode, then only the first enabled server is used and it should specify a print server. |
|
| 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1 | no-access |
A row in the Netware server table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brpsNetwareServerIndex | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.1 | integer | read-only |
The Netware server number. |
| brpsNetwareServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.8.1.2 | displaystring | read-write |
The Netware server name. Specifies a print server if the service is in remote printer mode, or a file server if the service is in queue server mode |
| brpsNetwarePasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.9 | integer | read-only |
Returns 1 if the Netware login password is set, 0 if not set. |
| brpsNDSSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.10 | integer | read-only |
0 indicates NDS is not supported. 1 indicates NDS is implemented by the firmware |
| brpsNetwareEtherIINetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.11 | displaystring | read-only |
Ethernet II network information. |
| brpsNetwareEtherIICount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.12 | integer | read-only |
Ethernet II network counter |
| brpsNetware8022NetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.13 | displaystring | read-only |
IEEE 802.2 network information. |
| brpsNetware8022Count | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.14 | integer | read-only |
IEEE 802.2 network counter. |
| brpsNetware8023NetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.15 | displaystring | read-only |
IEEE 802.3 network information. |
| brpsNetware8023Count | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.16 | integer | read-only |
IEEE 802.3 network information. |
| brpsNetwareSNAPNetInfo | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.17 | displaystring | read-only |
SNAP network information. |
| brpsNetwareSNAPCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.18 | integer | read-only |
SNAP network count. |
| brpsNetwareServicingServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.19 | displaystring | read-only |
Netware server name. |
| brpsNetwareServicingQueueName | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.20 | displaystring | read-only |
Netware queue name. |
| brpsNetwareServicingServerCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.21 | integer | read-only |
Number of netware servers. |
| brpsNetwareServicingQueueCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.22 | integer | read-only |
Number of netware queues. |
| brpsNetwarePrintJob | 1.3.6.1.4.1.2435.2.4.3.1240.5.3.23 | integer | read-only |
Number of netware print job. |
| brappletalk | 1.3.6.1.4.1.2435.2.4.3.1240.5.4 | |||
| brpsAppleTalkSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.1 | integer | read-only |
0 indicates the AppleTalk protocol is not supported. 1 indicates AppleTalk support is implemented by the firmware |
| brpsAppleTalkEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.2 | integer | read-write |
0 indicates the AppleTalk protocol is not enabled. 1 indicates that the AppleTalk protocol is enabled. Writing a non-zero value will enable the AppleTalk protocol if it is supported by the firmware. |
| brpsAppleTalkZone | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.3 | displaystring | read-write |
The AppleTalk zone the print server belongs to. |
| brpsAppleTalkPrintJob | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.4 | integer | read-only |
Counter of AppleTalk print job. |
| brpsAppleTalkReadByte | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.5 | integer | read-only |
Counter of read bytes. |
| brpsAppleTalkWriteByte | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.6 | integer | read-only |
Counter of write bytes. |
| brpsAppleTalkReadError | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.7 | integer | read-only |
Counter of read error. |
| brpsAppleTalkWriteError | 1.3.6.1.4.1.2435.2.4.3.1240.5.4.8 | integer | read-only |
Counter of write error. |
| brbanyan | 1.3.6.1.4.1.2435.2.4.3.1240.5.5 | |||
| brpsBanyanSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.1 | integer | read-only |
0 indicates the Banyan protocol is not supported. 1 indicates Banyan support is implemented by the firmware |
| brpsBanyanEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.2 | integer | read-write |
0 indicates the Banyan protocol is not enabled. 1 indicates that the Banyan protocol is enabled. Writing a non-zero value will enable the Banyan protocol if is is supported by the firmware. |
| brpsBanyanLoginName | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.3 | displaystring | read-write |
The Banyan login name. |
| brpsBanyanPassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.4 | displaystring | read-write |
The Banyan login password. |
| brpsBanyanHopCount | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.5 | integer | read-write |
Number of hops between the print server and the Banyan file server. |
| brpsBanyanTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.6 | integer | read-write |
Timeout in seconds for a Banyan print job. |
| brpsBanyanPasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.7 | integer | read-only |
Returns 1 if the Banyan login password is set, 0 if not set. |
| brpsBanyanIPNetworkID1 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.8 | octet string | read-only |
IP Network ID. |
| brpsBanyanIPNetworkID2 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.9 | octet string | read-only |
IP Network ID. |
| brpsBanyanRouter1 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.10 | octet string | read-only |
Router ID. |
| brpsBanyanRouter2 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.11 | octet string | read-only |
Router ID. |
| brpsBanyanIPPacket | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.12 | integer | read-only |
Counter of IP Packet. |
| brpsBanyanErrorCS | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.13 | integer | read-only |
Counter of CS error. |
| brpsBanyanErrorPT | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.14 | integer | read-only |
Counter of PT error. |
| brpsBanyanErrorLE | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.15 | integer | read-only |
Counter of LE error. |
| brpsBanyanPrintServerStatus | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.16 | displaystring | read-only |
Banyan print server status. |
| brpsBanyanServerAddress1 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.17 | octet string | read-only |
Banyan server address. |
| brpsBanyanServerAddress2 | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.18 | octet string | read-only |
Banyan server address. |
| brpsBanyanIPCConnectionInformation | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.19 | displaystring | read-only |
IPC connection information. |
| brpsBanyanIPCSequenceError | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.20 | integer | read-only |
IPC sequence error. |
| brpsBanyanIPCListen | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.21 | displaystring | read-only |
IPC listen. |
| brpsBanyanSPPConnectionInformation | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.22 | displaystring | read-only |
SPP connection information. |
| brpsBanyanSPPSequenceError | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.23 | integer | read-only |
SPP sequence error. |
| brpsBanyanSPPListen | 1.3.6.1.4.1.2435.2.4.3.1240.5.5.24 | displaystring | read-only |
SPP listen. |
| bremail | 1.3.6.1.4.1.2435.2.4.3.1240.5.6 | |||
| brpsEmailSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.1 | integer | read-only |
0 indicates the POP3/SMTP email protocols are not supported. 1 indicates email support is implemented by the firmware |
| brpsEmailEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.2 | integer | read-write |
0 indicates the POP3/SMTP email protocols are not enabled. 1 indicates that the email protocols are enabled. Writing a non-zero value will enable the email protocols if they are supported by the firmware. |
| brpsPOP3Address | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.3 | ipaddress | read-write |
The IP Address of the POP3 server. |
| brpsSMTPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.4 | ipaddress | read-write |
The IP Address of the SMTP server. |
| brpsPOP3Name | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.5 | displaystring | read-write |
The POP3 mailbox name. |
| brpsPOP3Password | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.6 | displaystring | read-write |
The POP3 mailbox password. |
| brpsPOP3PollFreq | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.7 | integer | read-write |
The POP3 polling frequency in seconds. |
| brpsPOP3Timeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.8 | integer | read-write |
The POP3 timeout in minutes. |
| brpsPOP3PasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.9 | integer | read-only |
Returns 1 if the POP3 password is set, 0 if not set. |
| brpsPOP3TotalMessage | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.10 | integer | read-only |
Counter of POP3 message. |
| brpsPOP3TotalConnect | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.11 | integer | read-only |
Counter of POP3 connect. |
| brpsPOP3TotalConnectFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.12 | integer | read-only |
Counter of POP3 connect error. |
| brpsPOP3TotalConnectionLost | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.13 | integer | read-only |
Counter of POP3 connection lost. |
| brpsPOP3TotalUserFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.14 | integer | read-only |
Counter of POP3 user error. |
| brpsPOP3TotalPasswordFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.15 | integer | read-only |
Counter of POP3 pass error. |
| brpsPOP3TotalIOError | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.16 | integer | read-only |
Counter of POP3 I/O error. |
| brpsSMTPTotalMessage | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.17 | integer | read-only |
Counter of SMTP message. |
| brpsSMTPTotalConnect | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.18 | integer | read-only |
Counter of SMTP connect. |
| brpsSMTPTotalConnectFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.19 | integer | read-only |
Counter of SMTP connect error. |
| brpsSMTPTotalRecvFromFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.20 | integer | read-only |
Counter of SMTP recvfrom error. |
| brpsSMTPTotalSendToFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.21 | integer | read-only |
Counter of SMTP recvfrom error. |
| brpsPOP3Supported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.101 | integer | read-only |
0 indicates the POP3 protocol is not supported. 1 indicates the POP3 protocol is implemented by the firmware |
| brpsSMTPServerAuthMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.102 | integer | read-write |
0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP. |
| brpsSMTPAUTHUsername | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.103 | octet string | read-write |
The username of SMTP server's account. |
| brpsSMTPAUTHPassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.104 | octet string | read-write |
The password of SMTP server's account. |
| brpsSMTPAUTHPasswordSet | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.105 | integer | read-only |
Returns 1 if the SMTP server login password is set, 0 if not set. |
| brpsSmtpAUTHTimeout | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.106 | integer | read-write |
The SMTP-AUTH timeout in seconds. |
| brpsPOPbeforeSMTPWait | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.107 | integer | read-write |
The wait time in mili seconds between POP logging in and SMTP sending. |
| brpsAPOPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.108 | integer | read-write |
0 indicates the APOP is not enabled. 1 indicates the APOP is enabled. |
| brpsSMTPEnhancedAuthSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.150 | integer | read-only |
Bit0 indicates 'no authentication'. Bit1 indicates 'SMTP-AUTH'. Bit2 indicates 'POP before SMTP'. |
| brpsAPOPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.151 | integer | read-only |
0 indicates the APOP is not supported. 1 indicates the APOP is supported. |
| brpsEmailSendTestSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.152 | integer | read-only |
0 indicates the Email Sending Test is not supported. 1 indicates the Email Sending Test is supported. |
| brpsEmailRecvTestSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.153 | integer | read-only |
0 indicates the Email Receiving Test is not supported. 1 indicates the Email Receiving Test is supported. |
| brpsChangeSMTPPortSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.154 | integer | read-only |
0 indicates to change the SMTP port number is not supported. 1 indicates to change the SMTP port number is supported. |
| brpsSMTPPortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.155 | integer | read-write |
The port number of connection to SMTP server. |
| brpsChangePOP3PortSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.156 | integer | read-only |
0 indicates to change the POP3 port number is not supported. 1 indicates to change the POP3 port number is supported. |
| brpsPOP3PortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.157 | integer | read-write |
The port number of connection to POP3 server. |
| brpsTmpSMTPServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.170 | octet string | read-write |
Temporary Setting for Email Sending Test. The FQDN name of the SMTP server. |
| brpsTmpSMTPServerAuthMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.171 | integer | read-write |
Temporary Setting for Email Sending Test. 0 indicates the user is not authenticated to the SMTP Server. 1 indicates the user is authenticated to the SMTP Server using SMTP-AUTH. 2 indicates the user is authenticated to the SMTP Server using POP before SMTP. |
| brpsTmpSMTPAUTHUsername | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.172 | octet string | read-write |
Temporary Setting for Email Sending Test. The username of SMTP server's account. |
| brpsTmpSMTPAUTHPassword | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.173 | octet string | read-write |
Temporary Setting for Email Sending Test. The password of SMTP server's account. |
| brpsTmpPOP3ServerName | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.174 | octet string | read-write |
Temporary Setting for Email Sending/Receiving Test. The FQDN name of the POP3 server. |
| brpsTmpPOP3Name | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.175 | displaystring | read-write |
Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox name. |
| brpsTmpPOP3Password | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.176 | displaystring | read-write |
Temporary Setting for Email Sending/Receiving Test. The POP3 mailbox password. |
| brpsTmpPrintersEmailaddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.177 | octet string | read-write |
Temporary Setting for Email Sending Test. The Printers Email Address |
| brpsTmpAPOPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.178 | integer | read-write |
Temporary Setting for Email Sending/Receiving Test. 0 indicates the APOP is not enabled. 1 indicates the APOP is enabled. |
| brpsTmpSMTPAUTHPasswordModified | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.179 | integer | read-write |
0 indicates the SMTP server password is not modified. 1 indicates the SMTP server password is modified. |
| brpsTmpPOP3PasswordModified | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.180 | integer | read-write |
0 indicates the POP3 server password is not modified. 1 indicates the POP3 server password is modified. |
| brpsTmpSMTPPortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.181 | integer | read-write |
Temporary Setting for Email Sending Test. The port number of connection to SMTP server. |
| brpsTmpPOP3PortNumber | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.182 | integer | read-write |
Temporary Setting for Email Sending/Receiving Test. The port number of connection to POP3 server. |
| brpsEmailSendTestMail | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.200 | integer | read-write |
0 indicates the testmail is not sended at Email Sending Test. 1 indicates the testmail is sended at Email Sending Test. |
| brpsEmailTestDestinationAddress | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.201 | displaystring | read-write |
The destination Email Address of Email Sending Test. |
| brpsEmailSendTestCall | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.210 | integer | read-write |
0 indicates the Email Sending Test is not called on. ('READY') 1 indicates the Email Sending Test is called on. ('START') 2 indicates the Email Sending Test is canceled. ('CANCEL') |
| brpsEmailRecvTestCall | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.211 | integer | read-write |
0 indicates the Email Receiving Test is not called on. ('READY') 1 indicates the Email Receiving Test is called. ('START') 2 indicates the Email Receiving Test is canceled. ('CANCEL') |
| brpsEmailSendRecvTestCall | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.212 | integer | read-write |
0 indicates the Email Sending and Receiving Test is not called on. ('READY') 1 indicates the Email Sending and Receiving Test is called. ('START') 2 indicates the Email Sending and Receiving Test is canceled. ('CANCEL') |
| brpsEmailTestResult | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.220 | integer | read-write |
This Value is divided into 15-8bit and 7-0bit. 15-8bit indicates Email Sending Test's Result. 7-0bit indicates Email Receiving Test's Result. (However, the value from 0x00 to 0x04 is only set to 7-0bit.) 0x00 indicates the Email Test is not running. 0x01 indicates the Email Test is running. ('BUSY') 0x02 indicates the Email Test is canceled.('CANCELED') 0x03 indicates the Email Test is Locked by another Email Test process.(LOCKED) 0x04 indicates the Email Test is not executed. -- unused 0x10 indicates the Status 'Fatal Error is occurred during Email Testing'. 0x20 indicates the Status 'Invalid value is set in SMTP Server Address'. 0x21 indicates the Status 'Invalid value is set in SMTP-AUTH Account Name'. 0x22 indicates the Status 'Invalid value is set in SMTP-AUTH Password'. 0x30 indicates the Status 'Invalid value is set in POP3 Server Address'. 0x31 indicates the Status 'Invalid value is set in POP3 Account Name'. 0x32 indicates the Status 'Invalid value is set in POP3 Account Password'. 0x40 indicates the Status 'Invalid value is set in POP3 Printer E-mail Address'. 0x41 indicates the Status 'Invalid value is set in Destination E-mail Address'. 0x50 indicates the Status 'Sending OK'. 0x51 indicates the Status 'Cannot locate SMTP server'. 0x52 indicates the Status 'Cannot connect to SMTP server'. 0x53 indicates the Status 'Cannot authenticate with SMTP server by using method'. 0x54 indicates the Status 'Authentication failure in SMTP server'. 0x55 indicates the Status 'Email Sending Timeout' -- unused 0x60 indicates the Status 'Receiving OK'. 0x61 indicates the Status 'Cannot locate POP3 server'. 0x62 indicates the Status 'Cannot connect to POP3 server'. 0x63 indicates the Status 'Authentication failure in POP3 server'. 0x64 indicates the Status 'Cannot authenticate with POP3 server by using method'. 0x65 indicates the Status 'Email Receiving Timeout' -- unused 0x66 indicates the Email Test is Locked by another Email process. 0x70 indicates the Status 'Cannot resolve the host name (DNS Error)'. |
| brpsPOP3TotalAPOPFailure | 1.3.6.1.4.1.2435.2.4.3.1240.5.6.221 | integer | read-only |
Counter of POP3 APOP error. |
| brdlc | 1.3.6.1.4.1.2435.2.4.3.1240.5.7 | |||
| brpsDLCSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.1 | integer | read-only |
0 indicates the DLC protocol is not supported. 1 indicates DLC support is implemented by the firmware |
| brpsDLCEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.2 | integer | read-write |
0 indicates the DLC protocol is not enabled. 1 indicates that the DLC protocol is enabled. Writing a non-zero value will enable the DLC protocol if is is supported by the firmware. |
| brpsDLCPrintStatus | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.3 | displaystring | read-only |
DLC print status. |
| brpsDLCLLCState | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.4 | integer | read-only |
LLC status. |
| brpsDLCLLCConnectHost | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.5 | displaystring | read-only |
LLC connected host name. |
| brpsDLCLLCLastIFrame | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.6 | integer | read-only |
LLC last valid I-frame. |
| brpsDLCLLCRecvPacket | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.7 | integer | read-only |
Counter of LLC receive packets. |
| brpsDLCLLCPortStatus | 1.3.6.1.4.1.2435.2.4.3.1240.5.7.8 | displaystring | read-only |
Port status. |
| brnetbeui | 1.3.6.1.4.1.2435.2.4.3.1240.5.8 | |||
| brpsNetBEUISupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.1 | integer | read-only |
0 indicates the NetBEUI protocol is not supported. 1 indicates NetBEUI support is implemented by the firmware |
| brpsNetBEUIEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.2 | integer | read-write |
0 indicates the NetBEUI protocol is not enabled. 1 indicates that the NetBEUI protocol is enabled. Writing a non-zero value will enable the NetBEUI protocol if is is supported by the firmware. |
| brpsNetBEUIDomain | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.3 | displaystring | read-write |
The NetBEUI domain name. |
| brpsNetBIOSIPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.4 | integer | read-only |
0 indicates the NetBIOS IP protocol is not supported. 1 indicates NetBIOS IP support is implemented by the firmware |
| brpsNetBIOSIPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.5 | integer | read-write |
0 indicates the NetBIOS IP protocol is not enabled. 1 indicates that the NetBIOS IP protocol is enabled. Writing a non-zero value will enable the NetBIOS IP protocol if is is supported by the firmware. |
| brpsNetBIOSIPMethod | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.6 | integer | read-write |
Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address. |
| brpsNetBIOSPrimaryWINSAddr | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.7 | ipaddress | read-write |
The IP Address of the primary WINS server. |
| brpsNetBIOSSecondaryWINSAddr | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.8 | ipaddress | read-write |
The IP Address of the secondary WINS server. |
| brpsNetBIOSPrintingSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.8.101 | integer | read-only |
0 indicates the NetBIOS IP protocol printing is not supported. 1 indicates the NetBIOS IP protocol printing is supported. |
| bripp | 1.3.6.1.4.1.2435.2.4.3.1240.5.9 | |||
| brpsIPPSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.1 | integer | read-only |
0 indicates the IPP protocol is not supported. 1 indicates IPP support is implemented by the firmware |
| brpsIPPEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.2 | integer | read-write |
0 indicates the IPP protocol is not enabled. 1 indicates that the IPP protocol is enabled. Writing a non-zero value will enable the IPP protocol if it is supported by the firmware. |
| brIPPRegularPortEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.3 | integer | read-write |
0 indicates that the IPP regular port is not enabled. 1 indicates that the IPP regular port is enabled. |
| brIPPSSLPortEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.4 | integer | read-write |
0 indicates that the IPP SSL port is not enabled. 1 indicates that the IPP SSL port is enabled. |
| brIPPOriginalPortEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.9.5 | integer | read-write |
0 indicates that the IPP original port is not enableed. 1 indicates that the IPP original port is enabled. |
| brntsend | 1.3.6.1.4.1.2435.2.4.3.1240.5.10 | |||
| brpsNtSendSupported | 1.3.6.1.4.1.2435.2.4.3.1240.5.10.1 | integer | read-only |
0 indicates the NtSend protocol is not supported. 1 indicates NtSend support is implemented by the firmware |
| brpsNtSendEnable | 1.3.6.1.4.1.2435.2.4.3.1240.5.10.2 | integer | read-write |
0 indicates the NtSend protocol is not enabled. 1 indicates that the NtSend protocol is enabled. Writing a non-zero value will enable the NtSend protocol if it is supported by the firmware. |
| brfirmware | 1.3.6.1.4.1.2435.2.4.3.1240.6 | |||
| brpsFirmwareIPAddress | 1.3.6.1.4.1.2435.2.4.3.1240.6.1 | ipaddress | read-write |
The IP address of the host from which to TFTP GET the firmware. |
| brpsFirmwareHost | 1.3.6.1.4.1.2435.2.4.3.1240.6.2 | displaystring | read-write |
The Netware server name from which to fetch the firmware. |
| brpsFirmwareFile | 1.3.6.1.4.1.2435.2.4.3.1240.6.3 | displaystring | read-write |
The firmware file to be reloaded. |
| brpsFirmwareReload | 1.3.6.1.4.1.2435.2.4.3.1240.6.4 | integer | read-write |
Setting a value of 0x5A will cause the print server to begin attempts to reload the firmware within 5 seconds. Further attempts to read or modify the configuration are not recommended until after the firmware has been reloaded. |
| brpsFirmwareDescription | 1.3.6.1.4.1.2435.2.4.3.1240.6.5 | displaystring | read-only |
Firmware version and date. |
| brpsFirmwareXModem | 1.3.6.1.4.1.2435.2.4.3.1240.6.6 | integer | read-write |
Set 1 execute XMODEM mode. |
| brpsFirmwareAdvancedAddressSupported | 1.3.6.1.4.1.2435.2.4.3.1240.6.7 | integer | read-only |
0 indicates the Firmware Advanced Address is not supported. 1 indicates Firmware Advanced Address support is implemented by the firmware |
| brpsFirmwareAdvancedAddress | 1.3.6.1.4.1.2435.2.4.3.1240.6.8 | displaystring | read-write |
The address of the host from which to TFTP GET the firmware. |
| brnetConfigOpt | 1.3.6.1.4.1.2435.2.4.3.2435 | |||
| broriginalprotocol | 1.3.6.1.4.1.2435.2.4.3.2435.5 | |||
| broriginaltcpip | 1.3.6.1.4.1.2435.2.4.3.2435.5.2 | |||
| brLPDType | 1.3.6.1.4.1.2435.2.4.3.2435.5.2.1 | integer | read-write | |
| broriginalftp | 1.3.6.1.4.1.2435.2.4.3.2435.5.10 | |||
| brFTPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.10.1 | integer | read-only |
0 indicates the FTP protocol is not supported. 1 indicates FTP support is implemented by the firmware |
| brFTPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.10.2 | integer | read-write |
0 indicates the FTP protocol is not enabled. 1 indicates that the FTP protocol is enabled. Writing a non-zero value will enable the FTP protocol if it is supported by the firmware. |
| broriginalupnp | 1.3.6.1.4.1.2435.2.4.3.2435.5.11 | |||
| brUPnPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.11.1 | integer | read-only |
0 indicates the UPnP protocol is not supported. 1 indicates UPnP support is implemented by the firmware |
| brUPnPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.11.2 | integer | read-write |
0 indicates the UPnP protocol is not enabled. 1 indicates that the UPnP protocol is enabled. Writing a non-zero value will enable the UPnP protocol if it is supported by the firmware. |
| broriginalapipa | 1.3.6.1.4.1.2435.2.4.3.2435.5.12 | |||
| brAPIPASupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.12.1 | integer | read-only |
0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware |
| brAPIPAEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.12.2 | integer | read-write |
0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware. |
| broriginalmdns | 1.3.6.1.4.1.2435.2.4.3.2435.5.13 | |||
| brmDNSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.13.1 | integer | read-only |
0 indicates the mDNS protocol is not supported. 1 indicates mDNS support is implemented by the firmware |
| brmDNSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.13.2 | integer | read-write |
0 indicates the mDNS protocol is not enabled. 1 indicates that the mDNS protocol is enabled. Writing a non-zero value will enable the mDNS protocol if it is supported by the firmware. |
| brmDNSPrinterName | 1.3.6.1.4.1.2435.2.4.3.2435.5.13.3 | displaystring | read-write |
mDNS Service Name |
| broriginalLAA | 1.3.6.1.4.1.2435.2.4.3.2435.5.14 | |||
| brLAASupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.14.1 | integer | read-only |
This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported |
| brLAAMacAddress | 1.3.6.1.4.1.2435.2.4.3.2435.5.14.2 | octet string | read-write |
A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F. |
| broriginalIPv6 | 1.3.6.1.4.1.2435.2.4.3.2435.5.15 | |||
| brIPv6Supported | 1.3.6.1.4.1.2435.2.4.3.2435.5.15.1 | integer | read-only |
0 indicates the IPv6 protocol is not supported. 1 indicates IPv6 support is implemented by the firmware |
| brIPv6Enable | 1.3.6.1.4.1.2435.2.4.3.2435.5.15.2 | integer | read-write |
0 indicates the IPv6 protocol is not enabled. 1 indicates that the IPv6 protocol is enabled. Writing a non-zero value will enable the IPv6 protocol if it is supported by the firmware. |
| brIPv6Priority | 1.3.6.1.4.1.2435.2.4.3.2435.5.15.3 | integer | read-write |
0 indicates the IPv6 protocol is low priority. 1 indicates that the IPv6 protocol is high priority. |
| broriginaltelnet | 1.3.6.1.4.1.2435.2.4.3.2435.5.16 | |||
| brtelnetSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.16.1 | integer | read-only |
0 indicates the telnet protocol is not supported. 1 indicates telnet support is implemented by the firmware |
| brtelnetEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.16.2 | integer | read-write |
0 indicates the telnet protocol is not enabled. 1 indicates that the telnet protocol is enabled. Writing a non-zero value will enable the telnet protocol if it is supported by the firmware. |
| broriginalEWS | 1.3.6.1.4.1.2435.2.4.3.2435.5.17 | |||
| brEWSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.1 | integer | read-only |
0 indicates the EWS protocol is not supported. 1 indicates EWS support is implemented by the firmware |
| brEWSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.2 | integer | read-write |
0 indicates the EWS protocol is not enabled. 1 indicates that the EWS protocol is enabled. Writing a non-zero value will enable the EWS protocol if it is supported by the firmware. |
| brEWSRegularPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.3 | integer | read-write |
0 indicates that the EWS regular port is not enabled. 1 indicates that the EWS regular port is enabled. |
| brEWSSSLPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.17.4 | integer | read-write |
0 indicates that the EWS SSL port is not enabled. 1 indicates that the EWS SSL port is enabled. |
| broriginalSNMP | 1.3.6.1.4.1.2435.2.4.3.2435.5.18 | |||
| brSNMPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.1 | integer | read-only |
0 indicates the SNMP protocol is not supported. 1 indicates SNMP support is implemented by the firmware |
| brSNMPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.2 | integer | read-write |
0 indicates the SNMP protocol is not enabled. 1 indicates that the SNMP protocol is enabled. Writing a non-zero value will enable the SNMP protocol if it is supported by the firmware. |
| brSNMPV3Supported | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.10 | integer | read-only |
0 indicates SNMPv3 is not supported. 1 indicates SNMPv3 is supported. |
| brSNMPCommMode | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.11 | integer | read-write |
1 indicates v1/v2c read-write access is enable. 2 indicates v3 read-write access is enable. 3 indicates v1/v2c read-only access and v3 read-write access is enable. |
| brSNMPV3UserName | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.12 | displaystring | read-write |
The username of SNMPv3. |
| brSNMPV3KeyType | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.13 | integer | read-write |
1 indicates that the key type of SNMPv3 is ASCII. 2 indicates that the key type of SNMPv3 is HEX |
| brSNMPV3AuthKey | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.14 | octet string | read-write |
The authentication key of SNMPv3. |
| brSNMPV3AuthPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.15 | displaystring | read-write |
The authentication password of SNMPv3. |
| brSNMPV3PrivKey | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.16 | octet string | read-write |
The privacy key of SNMPv3. |
| brSNMPV3PrivPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.17 | displaystring | read-write |
The privacy password of SNMPv3. |
| brSNMPV3ContextName | 1.3.6.1.4.1.2435.2.4.3.2435.5.18.18 | displaystring | read-write |
The contextname of SNMPv3. |
| broriginalldap | 1.3.6.1.4.1.2435.2.4.3.2435.5.19 | |||
| brLdapSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.1 | integer | read-only |
0 indicates the LDAP client is not supported. 1 indicates the LDAP client is implemented by the firmware |
| brLdapEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.2 | integer | read-write |
0 indicates the LDAP client is not enabled. 1 indicates that the LDAP client is enabled. Writing a non-zero value will enable the Ldap if it is supported by the firmware. |
| brLdapTimeout | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.3 | integer | read-write |
timeout value (sec) for LDAP server. |
| brLdapTimeoutSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.4 | integer | read-only |
0 indicates the LDAP timeout is not supported. 1 indicates the LDAP timeout is implemented by the firmware |
| brLdapServerCount | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.11 | integer | read-only |
Maximum number of LDAP Server INDEX. |
| brLdapServerInfoTable | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12 | no-access |
This table represents LDAP Server Info. |
|
| 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1 | no-access |
A row in the LdapServerInfo table. Rows cannot be created or deleted. |
||
| brLdapServerInfoIndex | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.1 | integer | read-only |
The number. |
| brLdapServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.2 | displaystring | read-write |
The LDAP server name. |
| brLdapServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.3 | integer | read-write |
The LDAP server port number. |
| brLdapServerAuth | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.4 | integer | read-write |
The LDAP server authentication method. Enumeration: 'simple': 2, 'kerberos': 3, 'anonymous': 1. |
| brLdapServerUserDN | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.5 | octet string | read-write |
The LDAP server user DN. |
| brLdapServerPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.6 | octet string | read-write |
The LDAP server password. |
| brLdapServerPasswordSet | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.7 | integer | read-only |
Returns 1 if the LDAP server password is set, 0 if not set. |
| brLdapServerBaseDN | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.8 | octet string | read-write |
The LDAP server base DN. |
| brLdapServerAttrEMail | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.10 | displaystring | read-write |
The LDAP server attribute or e-mail. |
| brLdapServerAttrFAXNumber | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.11 | displaystring | read-write |
The LDAP server attribute or facsimile telephone number. |
| brLdapServerAttrDetail1 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.12 | displaystring | read-write |
The LDAP server attribute or detail 1. |
| brLdapServerAttrDetail2 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.13 | displaystring | read-write |
The LDAP server attribute or detail 2. |
| brLdapServerAttrDetail3 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.14 | displaystring | read-write |
The LDAP server attribute or detail 3. |
| brLdapServerAttrDetail4 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.15 | displaystring | read-write |
The LDAP server attribute or detail 4. |
| brLdapServerAttrDetailEnable1 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.16 | integer | read-write |
Enable flag of the LDAP server attribute of detail 1. |
| brLdapServerAttrDetailEnable2 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.17 | integer | read-write |
Enable flag of the LDAP server attribute of detail 2. |
| brLdapServerAttrDetailEnable3 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.18 | integer | read-write |
Enable flag of the LDAP server attribute of detail 3. |
| brLdapServerAttrDetailEnable4 | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.19 | integer | read-write |
Enable flag of the LDAP server attribute of detail 4. |
| brLdapKerberosServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.20 | displaystring | read-write |
The Kerberos server name for LDAP. |
| brLdapKerberosServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.12.1.21 | integer | read-write |
The Kerberos server port number for LDAP. |
| brLdapServerAttrNameCount | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.21 | integer | read-only |
Maximum number of LDAP Server Attribute of name INDEX. |
| brLdapServerAttrNameTable | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22 | no-access |
This table represents LDAP Server Attribute of name. |
|
| 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1 | no-access |
A row in the LdapServerAttributeName table. Rows cannot be created or deleted. |
||
| brLdapServerAttrNameIndex | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.1 | integer | read-only |
The number. |
| brLdapServerAttrName | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.22.1.2 | displaystring | read-write |
The LDAP server attribute of name. |
| brLdapSetDefault | 1.3.6.1.4.1.2435.2.4.3.2435.5.19.99 | integer | read-write |
Setting the value resets all LDAP parameters to their factory default value. |
| broriginalTFTP | 1.3.6.1.4.1.2435.2.4.3.2435.5.20 | |||
| brTFTPSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.20.1 | integer | read-only |
0 indicates the TFTP protocol is not supported. 1 indicates TFTP support is implemented by the firmware |
| brTFTPEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.20.2 | integer | read-write |
0 indicates the TFTP protocol is not enabled. 1 indicates that the TFTP protocol is enabled. Writing a non-zero value will enable the TFTP protocol if it is supported by the firmware. |
| broriginalHTTPS | 1.3.6.1.4.1.2435.2.4.3.2435.5.21 | |||
| brHTTPSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.21.1 | integer | read-only |
0 indicates the HTTPS/IPPS protocol is not supported. 1 indicates HTTPS/IPPS support is implemented by the firmware |
| brHTTPSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.21.2 | integer | read-write |
0 indicates the HTTPS/IPPS protocol is not enabled. 1 indicates that the HTTPS/IPPS protocol is enabled. Writing a non-zero value will enable the HTTPS/IPPS protocol if it is supported by the firmware. |
| broriginalLPD | 1.3.6.1.4.1.2435.2.4.3.2435.5.22 | |||
| brLPDSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.22.1 | integer | read-only |
0 indicates the LPD protocol is not supported. 1 indicates LPD support is implemented by the firmware |
| brLPDEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.22.2 | integer | read-write |
0 indicates the LPD protocol is not enabled. 1 indicates that the LPD protocol is enabled. Writing a non-zero value will enable the LPD protocol if it is supported by the firmware. |
| broriginalRawPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.23 | |||
| brRawPortSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.23.1 | integer | read-only |
0 indicates the RawPort protocol is not supported. 1 indicates RawPort support is implemented by the firmware |
| brRawPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.23.2 | integer | read-write |
0 indicates the RawPort protocol is not enabled. 1 indicates that the RawPort protocol is enabled. Writing a non-zero value will enable the RawPort protocol if it is supported by the firmware. |
| broriginalLLTD | 1.3.6.1.4.1.2435.2.4.3.2435.5.24 | |||
| brLLTDSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.24.1 | integer | read-only |
0 indicates the LLTD protocol is not supported. 1 indicates LLTD support is implemented by the firmware |
| brLLTDEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.24.2 | integer | read-write |
0 indicates the LLTD protocol is not enabled. 1 indicates that the LLTD protocol is enabled. Writing a non-zero value will enable the LLTD protocol if it is supported by the firmware. |
| broriginalWebServices | 1.3.6.1.4.1.2435.2.4.3.2435.5.25 | |||
| brWebServicesSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.1 | integer | read-only |
0 indicates the WebServices protocol is not supported. 1 indicates WebServices support is implemented by the firmware |
| brWebServicesEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.2 | integer | read-write |
0 indicates the WebServices protocol is not enabled. 1 indicates that the WebServices protocol is enabled. Writing a non-zero value will enable the WebServices protocol if it is supported by the firmware. |
| brWebServicesRegularPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.3 | integer | read-write |
0 indicates that the WebServices regular port is not enabled. 1 indicates that the WebServices regular port is enabled. |
| brWebServicesSSLPortEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.25.4 | integer | read-write |
0 indicates that the WebServices SSL port is not enabled. 1 indicates that the WebServices SSL port is enabled. |
| broriginalLLMNR | 1.3.6.1.4.1.2435.2.4.3.2435.5.26 | |||
| brLLMNREnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.26.1 | integer | read-write |
0 indicates the LLMNR protocol is not enabled. 1 indicates that the LLMNR protocol is enabled. |
| broriginalKerberos | 1.3.6.1.4.1.2435.2.4.3.2435.5.27 | |||
| brKerberosSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.27.1 | integer | read-only |
0 indicates the Kerberos protocol is not supported. 1 indicates Kerberos support is implemented by the firmware |
| broriginalCIFS | 1.3.6.1.4.1.2435.2.4.3.2435.5.28 | |||
| brCIFSSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.28.1 | integer | read-only |
0 indicates the CIFS protocol is not supported. 1 indicates CIFS support is implemented by the firmware |
| brCIFSEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.28.2 | integer | read-write |
0 indicates the CIFS protocol is not enabled. 1 indicates that the CIFS protocol is enabled. Writing a non-zero value will enable the CIFS protocol if it is supported by the firmware. |
| broriginalSNTP | 1.3.6.1.4.1.2435.2.4.3.2435.5.29 | |||
| brSNTPCSupported | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.1 | integer | read-only |
0 indicates the SNTP is not supported. 1 indicates SNTP is supported. |
| brSNTPCEnable | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.2 | integer | read-write |
0 indicates the SNTP is not disabled. 1 indicates that the SNTP is enabled. |
| brSNTPCServerMethod | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.3 | integer | read-write |
1 indicates SNTP Server Method is AUTO. 2 indicates SNTP Server Method is STATIC. 3 indicates SNTP Server Method is PRESET. |
| brSNTPCSyncMethod | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.4 | integer | read-write |
1 indicates Synchronous Method is AUTO. 2 indicates Synchronous Method is STATIC. |
| brSNTPCIntervalMin | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.5 | integer | read-write |
The minimum value of synchronous interval. |
| brSNTPCInterval | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.6 | integer | read-write |
The synchronous interval is used for synchronous method INTERVAL. |
| brSNTPCSyncResult | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.7 | integer | read-only |
The result of the last checking time. 1: Success 2: Synchronizing 3: Failed 4: Not yet checking |
| brSNTPCPrimaryServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.8 | displaystring | read-write |
The primary server name of SNTP. |
| brSNTPCPrimaryServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.9 | integer | read-write |
The port number of primary SNTP server. |
| brSNTPCSecondaryServerName | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.10 | displaystring | read-write |
The secondary server name of SNTP. |
| brSNTPCSecondaryServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.5.29.11 | integer | read-write |
The port number of secondary SNTP server. |
| broriginalSecurity | 1.3.6.1.4.1.2435.2.4.3.2435.5.100 | |||
| brSecurityGeneralStatus | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1 | |||
| brDeviceNegotiationEncryptVer | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.1 | integer | read-only | |
| brpsServerCertificateNum | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.1.2 | integer | read-only | |
| brSecurityGeneralSetup | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.2 | |||
| brSecurityDeviceNegotiation | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10 | |||
| brDeviceNegotiationGetChallenge | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.1 | octet string | read-only | |
| brDeviceNegotiationConfirmPassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.2 | octet string | read-write | |
| brDeviceNegotiationChangePassword | 1.3.6.1.4.1.2435.2.4.3.2435.5.100.10.3 | octet string | read-write | |
| broriginalinternetsetting | 1.3.6.1.4.1.2435.2.4.3.2435.10 | |||
| broriginalproxy | 1.3.6.1.4.1.2435.2.4.3.2435.10.1 | |||
| brProxySupported | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.1 | integer | read-only |
0 indicates the Proxy is not supported. 1 indicates Proxy is implemented by the firmware |
| brProxyEnable | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.2 | integer | read-write |
0 indicates the Proxy is not enabled. 1 indicates that the Proxy is enabled. Writing a non-zero value will enable the Proxy if it is supported by the firmware. |
| brProxyBypassServer | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.3 | integer | read-write |
on(2) indicates the bypass proxy server for local addresses. Enumeration: 'on': 2, 'off': 1. |
| brProxyServerCount | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.11 | integer | read-only |
Maximum number of Proxy Server INDEX. |
| brProxyServerInfoTable | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12 | no-access |
This table represents Proxy Server Info. |
|
| 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1 | no-access |
A row in the ProxyServerInfo table. Rows cannot be created or deleted. |
||
| brProxyServerInfoIndex | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.1 | integer | read-only |
The number. |
| brProxyServerType | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.2 | integer | read-write |
The Proxy server ID. Enumeration: 'ftp': 3, 'http': 1, 'secure': 2, 'socks': 5, 'gopher': 4. |
| brProxyServerName | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.3 | octet string | read-write |
The Proxy server name. |
| brProxyServerPort | 1.3.6.1.4.1.2435.2.4.3.2435.10.1.12.1.4 | integer | read-write |
The Proxy server port number. |
| broriginalOtherSetting | 1.3.6.1.4.1.2435.2.4.3.2435.20 | |||
| broriginalJobTermination | 1.3.6.1.4.1.2435.2.4.3.2435.20.1 | |||
| brJobTerminationSupported | 1.3.6.1.4.1.2435.2.4.3.2435.20.1.1 | integer | read-only |
0 indicates the Job termination setting is not supported. 1 indicates the Job termination setting is implemented by the firmware |
| brJobTerminationEnable | 1.3.6.1.4.1.2435.2.4.3.2435.20.1.2 | integer | read-write |
0 indicates the Job termination setting is not enabled. 1 indicates the Job termination setting is enabled. |
| broriginalSNMPTrap | 1.3.6.1.4.1.2435.2.4.3.2435.20.2 | |||
| brSNMPTrapTable | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1 | no-access | |||
| brSNMPTrapIndex | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.1 | integer | read-only |
The number. |
| brTCPIPServerAddress | 1.3.6.1.4.1.2435.2.4.3.2435.20.2.1.1.2 | ipaddress | read-write |
The Destination IP Address for SNMP Trap. |
| broriginalLegacy | 1.3.6.1.4.1.2435.2.4.3.2435.20.3 | |||
| brLegacyCompatible | 1.3.6.1.4.1.2435.2.4.3.2435.20.3.1 | integer | read-write | |
| npMultiCards | 1.3.6.1.4.1.2435.2.4.4 | |||
| npMultiIFSet | 1.3.6.1.4.1.2435.2.4.4.99 | |||
| brMultiIFdns | 1.3.6.1.4.1.2435.2.4.4.99.1 | |||
| brMultiIFDNSTable | 1.3.6.1.4.1.2435.2.4.4.99.1.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.99.1.1.1 | no-access | |||
| brMultiIFTCPIPDNSIPSetup | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.1 | integer | read-write |
DNS mode 1:static 2:auto Enumeration: 'auto': 2, 'static': 1. |
| brMultiIFPrimaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.2 | ipaddress | read-write |
Primary DNS IP Address |
| brMultiIFSecondaryDNSIPAddress | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.3 | ipaddress | read-write |
Secondary DNS IP Address |
| brMultiIFTCPIPConnectTime | 1.3.6.1.4.1.2435.2.4.4.99.1.1.1.4 | integer | read-write |
TCP/IP connect time. |
| brnetMultiIFConfig | 1.3.6.1.4.1.2435.2.4.4.1240 | |||
| brMultiIFconfig | 1.3.6.1.4.1.2435.2.4.4.1240.1 | |||
| brMultiIFSupported | 1.3.6.1.4.1.2435.2.4.4.1240.1.1 | integer | read-only |
0 indicates the Multi Interface is not supported. 1 indicates Multi Interface is supported. |
| brMultiIFActiveIF | 1.3.6.1.4.1.2435.2.4.4.1240.1.2 | integer | read-only |
1 LAN 2 Wireless LAN 3 Both Enumeration: 'both': 3, 'lan': 1, 'wirelesslan': 2. |
| brMultiIFAllSetDefault | 1.3.6.1.4.1.2435.2.4.4.1240.1.3 | integer | read-write |
Setting the value resets all parameters to their factory default value. |
| brMultiIFCount | 1.3.6.1.4.1.2435.2.4.4.1240.1.4 | integer | read-only |
MultiIF Count |
| brMultiIFConfigureTable | 1.3.6.1.4.1.2435.2.4.4.1240.1.5 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1 | no-access | |||
| brMultiIFConfigureIndex | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.1 | integer | read-only |
The number. |
| brMultiIFType | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.2 | integer | read-only |
Interface Type Enumeration: 'lan': 1, 'wirelesslan': 2. |
| brMultiIFDescription | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.3 | displaystring | read-only |
Interface Description |
| brMultiIFNodeName | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.4 | octet string | read-write |
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| brMultiIFInterfaceEnable | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.5 | integer | read-write |
0 indicates the Interfase is not enabled. 1 indicates the Interfase is enabled. |
| brMultiIFEnetMode | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.6 | integer | read-write |
Ethernet type. |
| brMultiIFHardwareType | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.7 | integer | read-only |
Hardware type of the print server. |
| brMultiIFNodeType | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.8 | octet string | read-only |
A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters. |
| brMultiIFInterfaceEnableImmediate | 1.3.6.1.4.1.2435.2.4.4.1240.1.5.1.9 | integer | read-write |
|
| brMultiIFPrimaryInterface | 1.3.6.1.4.1.2435.2.4.4.1240.1.6 | integer | read-write |
Primary Interface |
| brMultiIFInterfaceInformation | 1.3.6.1.4.1.2435.2.4.4.1240.1.7 | integer | read-only |
0bit Auto 1bit manual 2bit enable both 3bit disable both |
| brMultiIFcontrol | 1.3.6.1.4.1.2435.2.4.4.1240.2 | |||
| brMultiIFControlTable | 1.3.6.1.4.1.2435.2.4.4.1240.2.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.2.1.1 | no-access | |||
| brMultiIFSetDefault | 1.3.6.1.4.1.2435.2.4.4.1240.2.1.1.1 | integer | read-write |
Setting the value resets all parameters to their factory default value. |
| brMultiIFservice | 1.3.6.1.4.1.2435.2.4.4.1240.4 | |||
| brMultiIFServiceTable | 1.3.6.1.4.1.2435.2.4.4.1240.4.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1 | no-access | |||
| brMultiIFServiceCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.1 | integer | read-only |
Number of services on this print server. |
| brMultiIFServiceStringLimit | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.2 | integer | read-only |
Maximum number of service strings supported by the print server. |
| brMultiIFServiceStringCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.3 | integer | read-only |
Number of service strings currently defined on the print server. |
| brMultiIFServiceFilterCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.1.1.4 | integer | read-only |
Number of service filters implemented by the device. |
| brMultiIFServiceInfoTable | 1.3.6.1.4.1.2435.2.4.4.1240.4.2 | no-access |
This table represents the attributes of a service. |
|
| 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1 | no-access |
A row in the services table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brMultiIFServiceIndex | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.1 | integer | read-only |
The service number. |
| brMultiIFServiceName | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.2 | displaystring | read-write |
The service name. |
| brMultiIFServicePort | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.3 | integer | read-write |
The port number assigned to this service. |
| brMultiIFServiceFilter | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.4 | integer | read-write |
Filter number assigned to this service. |
| brMultiIFServiceBOT | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.5 | integer | read-write |
Beginning of text string number assigned to this service. |
| brMultiIFServiceEOT | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.6 | integer | read-write |
End of text string number assigned to this service. |
| brMultiIFServiceMatch | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.7 | integer | read-write |
Match string number assigned to this service. |
| brMultiIFServiceReplace | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.8 | integer | read-write |
Replace string number assigned to this service. |
| brMultiIFServiceTCPPort | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.9 | integer | read-write |
TCP Port number assigned to this service. |
| brMultiIFServiceNDSTree | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.10 | displaystring | read-write |
The NDS Tree. |
| brMultiIFServiceNDSContext | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.11 | octet string | read-write |
The NDS Context in Unicode. |
| brMultiIFServiceVines | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.12 | displaystring | read-write |
The Vines StreetTalk name for this service. |
| brMultiIFServiceObsolete | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.13 | integer | read-write |
Obsolete parameter that is no longer used |
| brMultiIFServiceNetwareServerCount | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.14 | integer | read-write |
The number of Netware servers enabled on this service. Modifying the value will truncate the server list to the specified number of servers. If the value set is greater than the number of servers currently on the list, then the list will be unchanged. |
| brMultiIFServiceReceiveOnly | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.15 | integer | read-write |
When enabled, the service will only receive data, any printer responses will be discarded. |
| brMultiIFServiceTCPQueued | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.16 | integer | read-write |
When enabled, the raw TCP connections to the port will be queued while waiting for the port to become available |
| brMultiIFServiceProtocolLAT | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.17 | integer | read-write |
When enabled, the LAT protocol will be available on this service. |
| brMultiIFServiceProtocolTCPIP | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.18 | integer | read-write |
When enabled, the TCP/IP protocol will be available on this service. |
| brMultiIFServiceProtocolNetware | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.19 | integer | read-write |
When enabled, the Netware protocol will be available on this service. |
| brMultiIFServiceProtocolAppleTalk | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.20 | integer | read-write |
When enabled, the AppleTalk protocol will be available on this service. |
| brMultiIFServiceProtocolBanyan | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.21 | integer | read-write |
When enabled, the Banyan protocol will be available on this service. |
| brMultiIFServiceProtocolDLC | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.22 | integer | read-write |
When enabled, the DLC protocol will be available on this service. |
| brMultiIFServiceProtocolNetBEUI | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.23 | integer | read-write |
When enabled, the NetBEUI protocol will be available on this service. |
| brMultiIFServiceNetwareServerMode | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.24 | integer | read-write |
Netware mode for this service. 0 = Queue Server, 1 = Remote Printer |
| brMultiIFServiceNetwareRemotePrinterNum | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.25 | integer | read-write |
Remote Printer Number for this service |
| brMultiIFServiceProtocolIPP | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.26 | integer | read-write |
When enabled, the IPP protocol will be available on this service. |
| brMultiIFServiceAppleTalkType | 1.3.6.1.4.1.2435.2.4.4.1240.4.2.1.27 | displaystring | read-write |
AppleTalk type. |
| brMultiIFServiceStringInfoTable | 1.3.6.1.4.1.2435.2.4.4.1240.4.3 | no-access |
This table represents the service BOT/EOT/MATCH/REPLACE strings defined. |
|
| 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1 | no-access |
A row in the service string table. Rows cannot be created or deleted via direct SNMP operations. |
||
| brMultiIFServiceStringIndex | 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.1 | integer | read-only |
The string number. |
| brMultiIFServiceString | 1.3.6.1.4.1.2435.2.4.4.1240.4.3.1.2 | displaystring | read-write |
The character string definition suitable for displaying. |
| brMultiIFprotocol | 1.3.6.1.4.1.2435.2.4.4.1240.5 | |||
| brMultiIFtcpip | 1.3.6.1.4.1.2435.2.4.4.1240.5.2 | |||
| brMultiIFTCPIPTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1 | no-access | |||
| brMultiIFTCPIPAddress | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.1 | ipaddress | read-write |
IP Address assigned to the print server. |
| brMultiIFTCPIPSubnetMask | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.2 | ipaddress | read-write |
Subnet mask assigned to the print server. |
| brMultiIFTCPIPGateway | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.3 | ipaddress | read-write |
Gateway/Router address assigned to the print server |
| brMultiIFTCPIPMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.4 | integer | read-write |
Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol. |
| brMultiIFTCPIPUpdate | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.5 | octet string | read-write |
Hardware MAC address to be updated. This value is write only. Will read back as zeros. |
| brMultiIFTCPIPTimeout | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.6 | integer | read-write |
Timeout used for LPD connections. |
| brMultiIFTCPIPBootTries | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.7 | integer | read-write |
Number of attempts to use BOOTP, RARP, and DHCP. |
| brMultiIFTCPIPRARPNoSubnet | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.8 | integer | read-write |
If enabled, do not set the subnet mask based on the RARP response. |
| brMultiIFTCPIPRARPNoGateway | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.9 | integer | read-write |
If enabled, do not set the gateway/router address based on the RARP response. |
| brMultiIFTCPIPUseMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.10 | integer | read-write |
Method type that used set up TCP/IP configuration. |
| brMultiIFTCPIPMethodServer | 1.3.6.1.4.1.2435.2.4.4.1240.5.2.1.1.11 | ipaddress | read-write |
If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| brMultiIFnetbeui | 1.3.6.1.4.1.2435.2.4.4.1240.5.8 | |||
| brMultiIFNetBIOSTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1 | no-access | |||
| brMultiIFNetBIOSIPMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.1 | integer | read-write |
Method used to determine the IP Address of the WINS server. AUTO tries all protocols (currently only DHCP is tried). STATIC uses the configured address. |
| brMultiIFTCPIPNetBIOSPrimaryWINSAddr | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.2 | ipaddress | read-write |
The IP Address of the primary WINS server. |
| brMultiIFTCPIPNetBIOSSecondaryWINSAddr | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.3 | ipaddress | read-write |
The IP Address of the secondary WINS server. |
| brMultiIFNetBEUIDomain | 1.3.6.1.4.1.2435.2.4.4.1240.5.8.1.1.4 | displaystring | read-write |
The NetBEUI domain name. |
| brMultiIForiginalapipa | 1.3.6.1.4.1.2435.2.4.4.1240.5.12 | |||
| brMultiIFAPIPATable | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1 | no-access | |||
| brMultiIFAPIPASupported | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.1 | integer | read-only |
0 indicates the APIPA protocol is not supported. 1 indicates APIPA support is implemented by the firmware |
| brMultiIFAPIPAEnable | 1.3.6.1.4.1.2435.2.4.4.1240.5.12.1.1.2 | integer | read-write |
0 indicates the APIPA protocol is not enabled. 1 indicates that the APIPA protocol is enabled. Writing a non-zero value will enable the APIPA protocol if it is supported by the firmware. |
| brMultiIForiginalLAA | 1.3.6.1.4.1.2435.2.4.4.1240.5.14 | |||
| brMultiIFLAATable | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1 | no-access | |||
| brMultiIFLAASupported | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.1 | integer | read-only |
This value indicate if the locally administered addressing is supported. 0: Not Supported 1: Supported |
| brMultiIFLAAMacAddress | 1.3.6.1.4.1.2435.2.4.4.1240.5.14.1.1.2 | octet string | read-write |
A locally administered address (LAA) that replaces the factory-assigned MAC address (UAA: universally administered address). If this setting is all-zero address (i.e. 6 bytes of zeros), the factory-assigned MAC address is used as the MAC address of the device. The LAA address must start with X2, X6, XA, or XE, where X is any hexadecimal digit 0 to F. |
| brMultiIForiginalIPv6 | 1.3.6.1.4.1.2435.2.4.4.1240.5.15 | |||
| brMultiIFIPv6AddressCountTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1 | no-access | |||
| brMultiIFIPv6AddressCount | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.1.1.1 | integer | read-only |
IPv6Address Counter. |
| brMultiIFIPv6AddressTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1 | no-access | |||
| brMultiIFIPv6AddressIndex | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.1 | integer | read-only |
index |
| brMultiIFIPv6Address | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.2 | ipv6address | read-only | |
| brMultiIFIPv6UseMethod | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.3 | integer | read-only |
Method type that used set up TCP/IP configuration. 0: Unknown (Information not supported) 1: Manually 2: DHCPv6 3: Stateless Address Auto-configuration 4: Reserved 5: Link Local |
| brMultiIFIPv6MethodServer | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.2.1.4 | displaystring | read-only |
If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server. |
| brMultiIFIPv6StaticAddressCountTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1 | no-access | |||
| brMultiIFIPv6StaticAddressCount | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.3.1.1 | integer | read-only |
IPv6StaticAddress Counter. |
| brMultiIFIPv6StaticAddressTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1 | no-access | |||
| brMultiIFIPv6StaticAddressIndex | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.1 | integer | read-only |
index |
| brMultiIFIPv6StaticAddressEnable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.2 | integer | read-write |
index |
| brMultiIFIPv6StaticAddress | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.3 | ipv6address | read-write |
IPv6 Static Address |
| brMultiIFIPv6StaticAddressPrefixLength | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.4.1.4 | integer | read-write |
IPv6Address Prefix Length |
| brMultiIFDNSIPv6AddressTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1 | no-access | |||
| brMultiIFPrimaryDNSIPv6Address | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.1 | ipv6address | read-write |
Primary DNS IPv6 Address |
| brMultiIFSecondaryDNSIPv6Address | 1.3.6.1.4.1.2435.2.4.4.1240.5.15.5.1.2 | ipv6address | read-write |
Secondary DNS IPv6 Address |
| brMultiIForiginalWebServices | 1.3.6.1.4.1.2435.2.4.4.1240.5.16 | |||
| brMultiIFWebServicesTable | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1 | no-access | ||
| 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1 | no-access | |||
| brMultiIFWebServicesName | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.1 | displaystring | read-write | |
| brMultiIFWebServicesInstanceID | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.2 | integer | read-write | |
| brMultiIFWebServicesMetadataVersion | 1.3.6.1.4.1.2435.2.4.4.1240.5.16.1.1.3 | integer | read-write | |