BIANCA-BRICK-MIBMODEM-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-MIBMODEM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     bintec 1.3.6.1.4.1.272
                             bibo 1.3.6.1.4.1.272.4
                                 mdm 1.3.6.1.4.1.272.4.18
                                       mdmProfileTable 1.3.6.1.4.1.272.4.18.1 no-access
This Table contains entries for the modem profiles. For PPP connections, modem profiles are assigned to incoming connections via the isdnDispatchtable. For outgoing connections, the profile is assigned by the biboPppTable. Profile 1 is used as default profile for ppp and is the only profile available for isdnlogin connections.
                                           mdmProfileEntry 1.3.6.1.4.1.272.4.18.1.1 no-access
                                               mdmProfileName 1.3.6.1.4.1.272.4.18.1.1.1 integer read-only
The name of the profile. Eight profiles are available. Enumeration: 'profile-1': 1, 'profile-3': 3, 'profile-2': 2, 'profile-5': 5, 'profile-4': 4, 'profile-7': 7, 'profile-6': 6, 'profile-8': 8.
                                               mdmProfileDescr 1.3.6.1.4.1.272.4.18.1.1.2 displaystring read-write
Profile Description. Info only.
                                               mdmProfileModulation 1.3.6.1.4.1.272.4.18.1.1.3 integer read-write
This object specifies the preferred modulation (automode on) or the modulation (automode disabled) to be used in originating or answering a connection. bell103 (1) : 300 bell212 (2) : 1200 v21 (3) : 300 v22 (4) : 1200 v22bis (5) : 2400 or 1200 v23 (6) : 75/1200 or 1200/75 v32 (7) : 9600, 4800 v32bis (8) : 14000, 12000, 9600, 7200, 4800 v34 (9) : 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400 k56flex (10) : 56000, 54000, 52000, 50000, 48000, 46000, 44000, 42000, 40000, 38000, 36000, 34000, 32000 vfc (11) : 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600 v90 (12) : 56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667, 45333, 42667, 41333, 40000, 38667, 37333, 36000, 34667, 33333, 32000, 30667, 29333, 28000 Enumeration: 'v23': 6, 'v22': 4, 'v21': 3, 'v34': 9, 'v32bis': 8, 'vfc': 11, 'v32': 7, 'bell212': 2, 'k56flex': 10, 'v22bis': 5, 'v90': 12, 'bell103': 1.
                                               mdmProfileMinBps 1.3.6.1.4.1.272.4.18.1.1.4 integer read-write
This object specified the lowest rate, at which the modem may establish a connection. Enumeration: 'b44000': 44000, 'b56000': 56000, 'b1200': 1200, 'b16800': 16800, 'b300': 300, 'b31200': 31200, 'b36000': 36000, 'b9600': 9600, 'b38000': 38000, 'b52000': 52000, 'b28800': 28800, 'b40000': 40000, 'b14400': 14400, 'b42000': 42000, 'b34000': 34000, 'b75': 75, 'b48000': 48000, 'b2400': 2400, 'b19200': 19200, 'b46000': 46000, 'b12000': 12000, 'b26400': 26400, 'b50000': 50000, 'b33600': 33600, 'b32000': 32000, 'b7200': 7200, 'b24000': 24000, 'b54000': 54000, 'b4800': 4800, 'b21600': 21600.
                                               mdmProfileMaxRecvBps 1.3.6.1.4.1.272.4.18.1.1.5 integer read-write
This object specifies the highest receive rate, at which the modem may establsh a connection. Enumeration: 'b44000': 44000, 'b56000': 56000, 'b1200': 1200, 'b16800': 16800, 'b300': 300, 'b31200': 31200, 'b36000': 36000, 'b9600': 9600, 'b38000': 38000, 'b52000': 52000, 'b28800': 28800, 'b40000': 40000, 'b14400': 14400, 'b42000': 42000, 'b34000': 34000, 'b48000': 48000, 'b2400': 2400, 'b19200': 19200, 'b46000': 46000, 'b12000': 12000, 'b26400': 26400, 'b50000': 50000, 'b33600': 33600, 'b32000': 32000, 'b7200': 7200, 'b24000': 24000, 'b54000': 54000, 'b4800': 4800, 'b21600': 21600.
                                               mdmProfileMaxXmitBps 1.3.6.1.4.1.272.4.18.1.1.6 integer read-write
This object specifies the highest transmit rate, at which the modem may establsh a connection. Enumeration: 'b44000': 44000, 'b56000': 56000, 'b1200': 1200, 'b16800': 16800, 'b300': 300, 'b31200': 31200, 'b36000': 36000, 'b9600': 9600, 'b38000': 38000, 'b52000': 52000, 'b28800': 28800, 'b40000': 40000, 'b14400': 14400, 'b42000': 42000, 'b34000': 34000, 'b48000': 48000, 'b2400': 2400, 'b19200': 19200, 'b46000': 46000, 'b12000': 12000, 'b26400': 26400, 'b50000': 50000, 'b33600': 33600, 'b32000': 32000, 'b7200': 7200, 'b24000': 24000, 'b54000': 54000, 'b4800': 4800, 'b21600': 21600.
                                               mdmProfileAutoMode 1.3.6.1.4.1.272.4.18.1.1.7 integer read-write
When this object is set to on, the modem will automatically negotiate the best rates beginning with the selected Modulation and MaxBps values. Otherwise, it will use only the selected modulation in the range between MinBps and MaxBps. Enumeration: 'on': 2, 'off': 1.
                                               mdmProfileComprV42bis 1.3.6.1.4.1.272.4.18.1.1.8 integer read-write
This object specifies, whether V.42bis compression shall be used for modem connections. When set to off, V.42bis compression will never be used. When set to auto, compression may be negotiated with the partner modem. Enumeration: 'auto': 2, 'off': 1.
                                               mdmProfileComprMNP5 1.3.6.1.4.1.272.4.18.1.1.9 integer read-write
This object specifies, whether MNP Class 5 compression shall be used for modem connections. When set to off, MNP Class 5 compression will never be used. When set to auto, compression may be negotiated with the partner modem. Enumeration: 'auto': 2, 'off': 1.
                                               mdmProfileErrorCorr 1.3.6.1.4.1.272.4.18.1.1.10 integer read-write
This object specifies the kind of error correction being used for a connection: none no error correction will be used. required either LAPM or MNP will be used. If the partner is not able to do error correction, the connection cannot be established. auto negotiation takes place to use either LAPM, MNP or no error correction. lapm Enforce LAPM error correction. If the partner is not able to do LAPM, the connection cannot be established. mnp use MNP error connection If the partner is not able to do MNP, the connection cannot be established. Enumeration: 'mnp': 5, 'auto': 3, 'none': 1, 'required': 2, 'lapm': 4.
                                               mdmProfileXmitLevel 1.3.6.1.4.1.272.4.18.1.1.11 integer read-write
This object specifies the transmit attenuation in dB.
                                               mdmProfileCDWaitTime 1.3.6.1.4.1.272.4.18.1.1.12 integer read-write
This object specifies the amount of time in milliseconds, the modem will wait for the appearance of the carrier. If the carrier will not appear in this time period, the connection will be disconnected.
                                               mdmProfileCDRespTime 1.3.6.1.4.1.272.4.18.1.1.13 integer read-write
This object specifies the period of time in milliseconds, a carrier has to be present, before it will be recognized as a carrier.
                                               mdmProfileCDDiscTime 1.3.6.1.4.1.272.4.18.1.1.14 integer read-write
This object specifies the amount of time, the carrier has to drop, before the modem will assume the carrier to be lost.
                                               mdmProfileRetrain 1.3.6.1.4.1.272.4.18.1.1.15 integer read-write
The modem will : off (1) : disable line quality monitor and auto-retrain. retrain (2) : enable line quality monitor and auto-retrain. fallbf (3) : enable line quality monitor and fallback/fall forward. Enumeration: 'retrain': 2, 'fallbf': 3, 'off': 1.
                                               mdmProfileIdleTimerMode 1.3.6.1.4.1.272.4.18.1.1.16 integer read-write
The idle timer is used to specify the duration of an interval between successive characters received from the modem which, when exceeded, will cause the modem driver to terminate the assembly of a data packet and to forward it to the higher-layer protocols (this is in analogy to the ITU X.3 parameter #4). This object specifies the mode how the idle timer is set: static (1): the idle time is taken from the object mdmProfileIdleTimerFixedDelay (default) dynamic (2): the idle time is set to the duration that a number of mdmProfileIdleTimerCharDelay characters (octets) would take for transmission corresponding to the actually used receive bit-rate of the modem. If the bit-rate can not be found out, the static mode is used instead. Enumeration: 'dynamic': 2, 'static': 1.
                                               mdmProfileIdleTimerFixedDelay 1.3.6.1.4.1.272.4.18.1.1.17 integer read-write
This object specifies the duration of the idle timer in milliseconds (see the object mdmProfileIdleTimerMode for further description). Default: 5
                                               mdmProfileIdleTimerCharDelay 1.3.6.1.4.1.272.4.18.1.1.18 integer read-write
This object specifies the number of characters (octets) which is used to calculate the idle timer corresponding to the actually used receive bit-rate of the modem (see the object mdmProfileIdleTimerMode for further description). Default: 3
                                       mdmTable 1.3.6.1.4.1.272.4.18.2 no-access
The mdmTable contains information for each modem. The entries contain various statistical data for modem connections. Only the system can add entries to this table. The user is able to reboot, enable or disable a modem. The system updates infos about the current connection.
                                           mdmEntry 1.3.6.1.4.1.272.4.18.2.1 no-access
                                               mdmIndex 1.3.6.1.4.1.272.4.18.2.1.1 integer read-only
Index of this modem (Slot/Cpu/Modem)
                                               mdmAction 1.3.6.1.4.1.272.4.18.2.1.2 integer read-write
Writing to this variable reboot (1) : initiates a reboot. disabled (2) : remove modem resource from allocation pool. enabled (3) : put modem to allocation resource pool. Enumeration: 'disabled': 2, 'enabled': 3, 'reboot': 1.
                                               mdmType 1.3.6.1.4.1.272.4.18.2.1.3 integer read-only
Type of this modem csm56K (1) : CentralSiteModem K56Flex csm336 (2) : CentralSiteModem 33600 mdm144 (3) : ClientSiteModem 14400 mdm336 (4) : ClientSiteModem 33600 telindus (5) : ADSP with Telindus firmware Enumeration: 'mdm336': 4, 'csm56K': 1, 'telindus': 5, 'mdm144': 3, 'csm336': 2.
                                               mdmState 1.3.6.1.4.1.272.4.18.2.1.4 integer read-only
Current status of the modem. booting (1) : init phase idle (2) : this modem resource is available calling (3) : outgoing call initiated called (4) : incoming call initiated connected (5) : data transfer phase established hangup (6) : going to terminate a connection stopped (7) : out of order, modem ist not useable Enumeration: 'calling': 3, 'hangup': 6, 'idle': 2, 'connected': 5, 'booting': 1, 'stopped': 7, 'called': 4.
                                               mdmMode 1.3.6.1.4.1.272.4.18.2.1.5 integer read-only
Type of mode modem (1) : modem native ppp (2) : modem native + async hdlc fax (3) : fax mode dtmf (4) : receive and signal DTMF touchtones none (7) : modem curently not used Enumeration: 'ppp': 2, 'fax': 3, 'modem': 1, 'dtmf': 4, 'none': 7.
                                               mdmModulation 1.3.6.1.4.1.272.4.18.2.1.6 integer read-only
Negotiated modulation. same as mdmProfileModulation. Enumeration: 'v23': 6, 'v22': 4, 'v21': 3, 'v34': 9, 'unknown': 31, 'v32bis': 8, 'vfc': 11, 'v32': 7, 'bell212': 2, 'k56flex': 10, 'v22bis': 5, 'v90': 12, 'bell103': 1.
                                               mdmErrorCorr 1.3.6.1.4.1.272.4.18.2.1.7 integer read-only
Negotiated error correction protocol. none (1) : no error correction alt (2) : MNP error correction established lapm (3) : LAPM error correction established Enumeration: 'none': 1, 'lapm': 3, 'alt': 2.
                                               mdmCompression 1.3.6.1.4.1.272.4.18.2.1.8 integer read-only
Negotiated compression correction protocol. none (1) : no compression class5 (2) : MNP5 compression v42bis (3) : V.42bis compression Enumeration: 'v42bis': 3, 'none': 1, 'class5': 2.
                                               mdmXmitSpeed 1.3.6.1.4.1.272.4.18.2.1.9 integer read-only
Negotiated transmit speed.
                                               mdmRcvSpeed 1.3.6.1.4.1.272.4.18.2.1.10 integer read-only
Negotiated receive speed.
                                               mdmIfIndex 1.3.6.1.4.1.272.4.18.2.1.11 integer read-only
the (ISDN) interface's slot this modem is connected to
                                               mdmIfBchannel 1.3.6.1.4.1.272.4.18.2.1.12 integer read-only
the (ISDN) interface's B channel this modem is connected to